Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #54545 next resume »»
CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE
Geological Institute of Serbia-Belgrade, Serbia and IRC-Tripoli, Libya, 2004.-present; Senior Geologist-Geological mapping on the sheets NF 33-3, NG 33-11, NG 34-5 and NG 34-1 (1:250,000 scale), interpreting of geological structures, volcanic, sedimentary and metamorphic rocks definition, design of geologic map, FAS, dBase processing and integration in GIS environment, petrological and mineralogical studies, data processing and analysis, prospect potential occurrence selection.

Contractor Belgrade, exploration & construction Company, Serbia, 2002-2004; Senior Geologist/Expert for Industrial non-metallic Mineral Deposits-responsible for data analyzing, managing of detailed geological maps and cross-section of open-pit occurrences. Participated in about 30 exploration projects and 5 feasibility studies.

Priority Drilling-at Tara mine (Co-Zn), Republic of Ireland, 2001-feb.-nov.; Wire-line (Underground) Diamond Driller-first three months worked as a Driller on surface, operating with the Longyear drilling rig (wire-line diamond driller). After that I continued to work as an underground wire-line diamond driller operating with Diamec 260E rig. Also, examined wire-line drilling core; logged in and evaluated some intervals.

Port of Bar-Montenegro, Serbia & Montenegro, 2000-march-avg.; Consulting Structural geologist for blasting work and quarrying-quarries exploration for "Port of Bar"- Montenegro. Verifying all probing from the boreholes, in total over 140 boreholes were studied.

Pankom-engineering and constructing company-Belgrade, Serbia & Montenegro, 1999-2000; Drill Site Geologist/Drill Log Interpreter-work involved analyzing drill-sites investigation data and negotiating the approval for the work with the state environmental regulator. The other project was the assessment of existing drainage protection and the design of an upgraded surface water collection system.

Electric & Power Industry of Serbia,-"Soko" and "Jasenovac" underground coal mines, Serbia, 1993-2000/2001-2002; Chief Geologist/Engineer for Mineral Deposits /Hydrogeologist /Seismic Interpreter-Since 1993 to 2000/02, I worked as a Geologist/Chief geologist/Engineer for Coal Deposits for Electric & Power Industry of Serbia, at Jasenovac Coal Mine (Eastern Serbia) and Soko Coal Mine (SE Serbia). My responsibilities included supervision of surface and underground exploration (conventional) drilling (Longyear 160 and Diamec 250E rigs) for coal, core evaluation, detailed underground mapping, creating the structural map of occurrences for further excavation. Also, I was responsible for producing the permanent record drawings and documentation for the adits, mining works and stopes including all the underground lithilogical and geotechnical face records. I was assigned for producing of hydrogeological map of the occurrences area, water ingress/loss calculations with permanent examination of ground water altitude variations. I led the drill teams and supervised surface and underground exploration drilling, provided logging and analyzing core data. This involved TCR, SCR, FI, and RQD. At Soko Coal Mine, I run the safety drilling crew ( Minihydrac rig) that was responsible for gas prevent and coal degasification (methane) and I correspond with geochemistry lab for gas evaluation and reports writing (FID equipment). In 2002, I was involved in the team for seismic interpretation of geophysical research at Soko mine, including time, isochrones and layer depth mapping involving 6 horizons/formations, seismic data analyzing (UNIX Sun station)

SKILLS
Senior Geologist-Regional and prospect level interpretations, surface and subsurface mapping, cross-section and maps construction, petrography and sedimentary analyzing, remote sensing.
Geologist for mineral deposits & Mine Geologist-Estimation of formation and data integration with other subsurface data, development geology and occurrence characterization.
Structural Geologist-Data observation and processing, strike-slip tectonic settings, subsurface seismic data integration
Stratigrapher-Sequence stratigrapher, quick macro and micro palaeontological interpretation
Seismic Interpreter-Seismic interpretation and data analyzing, and their implementation into structural maps
2D & 3D modeller, dB adm., GIS Engineer-Maps and cross-sections designing, logs and occurrence modelling, Field acquisition system, Database and LAN Administrator

ADDITIONAL SKILLS
Drill Site Geologist/Driller-Monitoring drilling parameters, core evaluation, interpretation of wire-line/conventional logging, blow out protection
Hydrogeologist-Setting of groundwater depositional systems, monitoring drilling parameters, hydrogeological mapping of mine waters, flooding control

TECHNICAL EXPERIENCE
Drilling-Wire-line/conventional drilling, BOP, blasting drill works
Seismic-Sun work station
Gas detecting-Dräger gas det. station, FID lab unit
PC systems-MS DOS, Windows XP-NT, MacOS, basics of Unix (Solaris and Linux)
GIS (2D & 3D geological & geochemical maps) databases and linking to digital maps ESRI ArcInfo, ER Mapper, GemCom, Pendragon Forms 3.2, GeoFrrame, Rockworks, Basin2 5.0, Starter, EQuIS, Irap-RMS…
Geochemistry, chemical modelling-FO2PH, MinPet, NewPet
Structural data analysis-Dips, SpheriStat, StereoNet, Stereostat
Graphics processing-ArcInfo, AutoCad, Canvas, CorelDraw, Freehand, AdobePhotoShop, CorelPhotoPaint, PaintShopPro
Programming languages Essentials of Visual Basic, SQL, Fortran

LANGUAGES
English (fluent), Russian (good), Bulgarian (fluent), basic of Arabic and other Slavic languages

View contact information...
«« previous resume next resume »»
Search Results (Resumes 201 to 250 of 3444)Go to Search Parameters...
Brief Description
I am a highly motivated, hardworking and versatile individual with a strong commitment to excellence in quality workmanship. I believe my experience, knowledge, dedication and willingness to handle and adapt to new challenges would prove to be most valuable to your company.
I have extensive experience in Cu/Mo/Au Concentrators working in the US and Chile in both technical and operations side of the business. My experience includes, conventional crushing and ball mill operations as well of SABC circuits.
I have had the opportunity to work either in extractive pyro or hydrometallurgy coupled with a strong background in computing . I am doing my best to be aware of all step made in metallurgy. I am honest, experienced leader and team builder. I accept also to relocate with my family.
Maintenance planning, projecting, implementation, monitoring, management, highly experienced in these areas.
Skilled mining enginner (blasting engineer) and of upto 12 to 13 years experiance
I have master degree in mining engineering and i have 10 years experience in mining engineering field such as open pit mining and underground.I worked in coal underground mines, marble,florin,copper andmanganeze mines.i was the member of American society of minning ,metalurgy and petrolium engineer
MC Driver and Chef
I am actively seeking a production management opportunity in a demanding, fast-paced multi-tasking environment, where I can provide critical management with a multitude of skills, and I would like to continue my growth with in your company.
20+ years exp. in survey and valuation, mines rescue services
I did my diploma in mining engineering from schools of mines , kolar gold fileds, board of technical examinations, karnataka, india. 30 years experience in underground field.
Electrical/Instrumentation. Design, supervise, commission and maintenance. 44 years experience. Tech Cert. T3, Nat.cert electrical N5, Prod. Mgr. Dipl. (4year). SAMTRAC,ITIS(Safety certificates, licence to train).etc.
Sr. Geologist / GIS Analyst / Mine Geologist / Structural Geologist
I am a serious minded individual seeking a new environment that has a challenging and rewarding future. I can offer you 29 years of experience in the mining industry (phosphate/open pit). I have obtained my experience from working the ground level up to management.
Millwright welding tickets
Over 20 years experience in both Supply and Project Logistics in both Oil and Gas as well as Mining. I also have direct Freight Forwarding experience including multi modal transport involving bulk, express, heavy haulage and over dimensional.
My underground mining experience begins from 1986. Over those years I was involved in all aspects of Underground mining. Beginning from manual labor, operating underground machineries, supervising crew, training new operators, to take role as Mine Foreman
Current position held: Project Exploration Geologist, Reefton Gold Project. Gold exploration 1993 - 1995, 2000 - present. Oil exploration 1996 - 1998
22 Years of experience in Granite and Minerals Industry. Project Head and Managerial cadre experience.
Strong technical and practical knowledge of mining and mineral processing. Over 20 year’s industry experience, in large and small mining operations, experiences in hard rock, sand and gravel, limestone, cement rock, and industrial minerals facilities. BS Mining Engineering.
An experienced daimond core drilling engineer seeks employment.24 years wide range experience in daimond, rotary and DTH drilling methods.Operation,maintanance and fishing,trouble shooting.Had overseas experience in Tanzania during 1995.
Coal Resource Geologist,Minescape software modelling skills,working in Coal field at Indonesia for past 2yrs,Having experience in various experience & skills Geological fields.
Excavator-grapple, mobile shear, excavation, demolition, scrap handling, stripping, quarry work
I have 32 years of millwright and supervisory experience with gyro and cone crushers,ball and sag mills up to 36 ft. Knelson concentrators, CIL leach systems, gold and copper systems, conveyors, screens, gold refining equipment.
10 years as maintenance manager, 10 years in africa. congo, mali. and guinea.
Working on Marion 8050 and 8200 draglines. Responsible for safe operations, following mine plans and maintenance of machines.
Thirty-One years of experiance in manufacturing
Senior drilling supervisor with 30+ years project experience in remote areas of the world.
I have been working in the mining industry for the past 30 years.
MEP Project Manager, Estimator, Procurement, Mechanical, Electrical, Civil, Plumbing
CFO & Treasurer - publicly traded oil & gas & mining company
I am a qualified Mechanical Design Draughtsman and a Fitter Turner Machinist. I have also completed the Management Development Programme through The University of Stellenbosch.
!$ years rich experience in coal mining both in underground and opencast, Experience in greenfield and brown field project
My name is Bruce Hutcheson and I recently worked as an Assistant Plant Manager at Luck Stone Corporation, located in the Northern Virginia area. As a dedicated manager for over 20 years, I am inquiring about a new opportunity to expand my career while inproving your client’s bottom line.
Diploma in High voltage switching-Maintenance Planner-Electrical maintenance
Material Handling Operation (Coal Handling System; Ash Handling System; Limestone System; Gypsum Area; Waste Handling Area; Fuel Oil System and Heavy Equipment), hard worker with 14 years hand on experiences in Power Plan Operation, commissioning, trouble shooting and root cause analysis.
25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation
Senior Mechanical Engineer (M.Sc.) having experience as plant manager and project manager, specialist in mining, safety glass, manufacturing plant and brewery investments.
Mining Engineer from with 24 years experience in underground as well as opencast mines. I have exposure in Lead-Zinc, Chromate Mines, Bauxite Mines and Limestone Mines. Presently, working as functional head of Limestone Mines captive to Cement plant.
18+ years automotive mechanics,11+years powder metal industry blending heatreat operations etc.
I have been working as an exploration geologist for 20+ years, field work to project management, Porphyry, Magmatic and Gold deposits in Canada
To Secure a position with an established organization, to utilize my knowledge and experience in the field of Heavy Duty Equipment.
I have a comprehensive understanding of a wide and varied range of vehicles, including HGV, PSV, Heavy Plant and Drilling Machinery. I am keen to use these multiple skills in a post which will prove challenging. In addition to my mechanical capabilities, I also have a good working knowledge of hydra
Career Maintenance Manager Mining
Diamond Drill Operator, surface drilling with the use of various types of machinery
28 years experience in ug/ hard rock and coal. Hard Rock: Alimak, Drift (rubber and rail), all types of stoping methods, and equipment operator of 1,1/4yd to 9yd loaders all brands, over shot rail muckers from 12b to 25 , jumbo drills single and double boom. Coal: Fletcher bolter and long wall
Marine engineer with all training necessary and green card
National Diploma in Chemistry and 28 Years experience in Laboratory work and management.
My field experience is 20 years in monitoring, planning and executing exploration programme for following minerals,1.coal, 2. iron-manganese, 3. tungstan, 4. diamond,5. lithium-rubidium-cesium, 6 copper. Leasing and liasoning work with govt. and private cos. Project manager-05 years exp.
Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.
reclamation and quarry
First   1   2   3   4   [ 5 ]   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com