Resume - Accumulated almost 10 years working experience in Apo Cement Corporation, Cemex,...

Misco Jobs

Resume #59376

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

Holding a degree in Bachelor of Science in Mechanical Engineering. Accumulated almost 10 years working experience in Apo Cement Corporation, Cemex, Philippines. Directly involves in operation, inspection, maintenance and commissioning of the following Krupp Polysius AG manufactured equipment: 2 units 170 tons/hour cement grinding tube mill, 2 unit 300 tons/hour vertical raw mill. Commissioning of upgrade and conversion of new PLC (from POLCID-DC to FLSmidth automation). Presently cross-trained as a Central Control Operator for Kiln and Coal Mill.

EXPERIENCE
APO CEMENT CORPORATION May 2007 ¡V present (cross-training) Philippines

„Ï
Production Central Control Room Operator-Kiln and Coal Mill

Job Summary:

Operate, monitor and manage operations of the kiln, coal mill and clinker cooler areas according to required operating standards with the objective of ensuring continuous operations and delivery of high quality products to end-users.

Duties and Responsibilities:

* Operate and monitor operations of assigned equipment through downtime and data recorded in log sheets, review inspection checklist and provide solutions in addressing these problems IN ORDER TO ensure continuous equipment operations at optimized capacity and meeting quality standards at high operative efficiency.

* Review production capacity of assigned equipment and operational problems encountered Implement or coordinate necessary adjustments needed on equipment IN ORDER TO ensure achievement of production targets.

* Monitor physical inventory of materials based on data shown in assigned equipment; Provide feedback to request for replenishment IN ORDER TO ensure availability of materials to ensure continuous operations.

* Monitor qualify of products and abnormalities encountered during operations; Implement necessary adjustment parameters to assigned equipment to address problems IN ORDER TO ensure compliance to quality standards.

* Gather and consolidate data from log sheets and prepare required shift reports IN ORDER TO provide plant management team information on production efficiency.

* Practice and conform to all certification guidelines and procedures; Participate in annual audit IN ORDER TO maintain and ensure renewal of certification.

EXPERIENCE
APO CEMENT CORPORATION May 2003 ¡V May 2007 Philippines

„Ï
Production Central Control Room Operator-Raw and Finish Mill

Job Summary:

Overall in-charge in the control operation of the different machinery and equipment of cement manufacturing process. ( VRM and Finish mill areas)

Duties and Responsibilities:

* Responsible in running the operation of each section thru central control room and field.

* Responsible in coordinating with Power Plant, Water treatment and Laboratory.
a. Power Plant ¡V request for additional power.
b. Water Treatment ¡V request supply for process water, cooling water and portable water.
c. Laboratory ¡V coordinate with the result on chemical analysis on the different products obtain during operation.

* Analyzes operating parameters and decides on adjustments as necessary in order to ensure smooth, continuous and cost effective operation.

* Directs and coordinates work to be performed by Field Engineers

* Plans/Prepares scheduled shutdown works.

* Prepares production reports.

* Practice and conform with all environmental and safety policies, guidelines and procedures.

EXPERIENCE APO CEMENT CORPORATION Nov 1997 - May 2003 Philippines

Production Field Engineer-Raw and Finish Mill

Job Summary:

In-charge in the control operations of different machinery and equipment in the field on the process of cement manufacturing. (VRM and Finish mill areas)

Duties and Responsibilities:

* Responsible in monitoring the raw and cement mill area machinery and equipment.

* Responsible in coordinating with the raw and cement mill CCR Engineer in his specified area for abnormalities observed in its machinery and equipment.

* Will serve as reliever for VRM and FM CCR Engineer in the case as the need arises.

* Responsible in running the machinery in the field in local operation when necessary.

* Practice and conform with all environmental and safety policies, guidelines and procedures.

* Performs preventive and corrective maintenance servicing of all mechanical equipment.

* Check mechanical equipment and installation reported to have abnormal condition of operation.

* Performs rectification/repair of mechanical equipment and installation, fabricates and repairs steel and mechanical parts and structures.

* Performs major inspection works and overhaul jobs of mechanical equipment and installation.

* Cleans and safe-keeps assigned tools and testing equipment and also tools and devices required for performance of assigned jobs.

* Ensure safety standards.

TRAININGS AND SEMINARS ATTENDED:

Project Management
Conducted By: Philippine Society of Mechanical Engineers
Cebu City Philippines
June, 1997

Developing Work Program and Development of an Industrial Safety Program
Conducted By: Philippine Society of Mechanical Engineers
Sept, 1998
Cement Plant Equipment Lubrication
Conducted By: Pilipinas Shell Petroleum Corporation
October, 1998
Krofta Wastewater Treatment
Conducted By: PSME Cebu Chapter
Cebu City, Philippines
March, 1998
Design Technology, A Challenge in Environment Management
Conducted By: PSME Cebu Chapter
Cebu City, Philippines
April, 1998
Pneumatics Control and System Maintenance
Conducted By: CATIA Foundation, Inc.
Cebu, Philippines September 8 ¡V 10, 2003 Maintenance Training
Conducted By: Cemex Way-Tech & Operations
Apo Plant
July 2, 2002

First Aid & Basic Life Support Course
Conducted By: Emergency Rescue Unit Foundation
Apo Plant
Apr 16-17,2002

Safety And Preventive Maintenance in the Cement Industry
Conducted By: Euromerica Trade Philippines, Inc.
Apo Plant
Nove 28,2000

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 3129)

Go to Search Parameters...

Brief Description

Experienced Cad Manager/Project Coordinator. Multi Discipline design teams. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProCadam. Engineering background - Structural/Civil.

DOCUMENT CONTROL MANAGER Successful, motivated, qualified with over 25 years extensive experience, covered all levels of data and admin management pro-active hands-on team member / leader. Experienced in all levels of computerised & manual document control.

Presently have 32 years of sawmill and planner mill experience Operated all heavy equipment involved with lumber operation Safe work habits witch are indicated by 1 incident in 32 years Excellent mechanical knowledge

31 years experience (10 years international) in project and contract management of large scale industrial projects in the oil & gas (onshore & offshore), alumina, petroleum, brewing, iron ore, nickel, gold and general mining industries.

20+ years in Mining/Smelting/Construction Industry. Gold, Nickel, Industrial Minerals (ilmenite, garnet). Exstensive international experience for large companys. Contact Tel +47 917 09 554 email brian_ballou@yahoo.com

Interrested in rotational international opportunities in Maintenance Management or Senior Maintenance Planning positions

A dedicated, committed individual who is both practical and adaptable positive and versatile a self-starter with an ability to motivate individuals to achieve results a team player.Years of experience in the industry, wanting owrk overseas. flexible and reliable

Worked ten years in underground coal mine for Peabody coal compny. Was certified electrician from 1974-1984. Worked as a foreman and assistant mine manager.

Free! Coal Geologist/Geotechnical Engineer

Have skill in mineral processing, with emphasis on Lab test for plant support, comminution, physical separator, recovery, mill throughput. Experience in plant sampling, analysis, improvement, and implementation in action plant of mineral processing technologies.

I am an indian national qualified geologist. I am looking for an international opportunity whic should be challenging as well as lucrative.

8 yrs exp coal mining; exp in SAP PP, TOC SCM, DuPont Safety; OHSAS

Involved in exploration for precious metals in Archaean and Proterozoic terrains of India, includes Gold, PGE, Ni and basemetals

Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.

Erection, Commissioning & Trouble shooting of Rotary Kilns, Ball Mills, Vertical Roller Mills and Electrostatic Precipitators.

Mech engineer with more than 8 yrs exp in various mining companies in different countries. Having exposure to the latest maintenance practice with sohisticated system. Highly involved in planning, budget forcasting .

I have been involved in both project development and mine operations aspect of the mining project.

Accumulated almost 10 years working experience in Apo Cement Corporation, Cemex, Philippines. Directly involves in operation, inspection, maintenance and commissioning of the following Krupp Polysius AG manufactured equipment: 2 units 170 tons/hour cement grinding tube mill, 2 unit 300 tons/hour VRM

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Mechanical fitter, heavy engineering, worked all over africa, currently in mali, knowledge of hydraulics and pneumatics, work on winders mills etc laser alignment

Years of exp. in the Western U.S. and South America. Exploration trough production with the big five surface and underground operations. Understands South America.

With 20 years experience in fire, rescue and emergency response, I hold instructor qualification in the areas of high angle, aviation, confined space, trench rescue and well as fire fighting. I am at present completing a post graduate diploma in WH&S run by CQ Uni, Australia.

A confident organised individual who is methodical in his approach to completing tasks, Can either work as a self – reliant individual or as part of a team.

Mine/Mill Maintenance Supervisor OBJECTIVE: A position in the mining industry, where ever I can be useful as a Mine/Mill production / process manager, Supervisor, Maintenance Technician

I have spent 23 years in the extractive and minerals processing industries.

I am submitting the following CV/resume for your evaluation and review.

Supervisor - SAFE Underground Mining/Training - Production/Development and Construction. Atlas-Copco, Boart-Longyear, Wagner, Caterpillar, etc. 20+ years in Underground Gold, Silver, Lead and Zinc.

I am an experienced and passionate Underground Mining Management professional looking for new opportunities and challenges where I can contribute with the transfer and application of my knowledge, experience and skills whilst being able to enjoy personal growth creating a win-win situation.

IT leader with solid accomplishments working for global industries for the last 20 years. Value delivered in Brazil, Argentina, United States, Canada, Uruguay, Puerto Rico, Colombia and Germany. Focus on IT ROI, management, planning and operational excellence.

MBA Project Manager experienced in managing both infrastructure and application development projects.

I am an Engineering graduate (Honorable Mention) and Master Of Business Administration with 22 years of experience in cement industry. Self-motivated and result oriented individual with experience in various levels and disciplines in the large size MNC cement plants i.e. 1 million and 3 million tonn

Leading Hand Diesel Fitter

Exploration Geologit experience in Gold, Base metal Experience

Facilitator for maintenance departments. Business Process mapping, maintenance performance assessment, Installed and directed a successful planned maintenance system that has improved equipment availability and significantly decreased direct operation cost. Meeting federal and state environmental re

DME amd AMIE Sec'A' with over 8 years exp. in Heavy Duty Diersel Engine and HEMM spares

I am a mining engineer and I do work in South Africa for the past 11 years also I do have a MSc degree in mining engineering and more than 10 years experience in underground mining (gold and diamonds), and currently working for De Beers for the last 5 years

Melbourne, Australia Logistics Professional Have worked in many countries around the globe Extensive global knowledge of general freight movement, heavy lift and transportation requirements. Heavy shipping & barging, including barge landings.

Diamond Drilling Foreman(FSU)

Qualified Diesel Mechanic specializing in Hydraulics. I have 27 years experience in mining. A self starter who needs the minimum supervision.

35 years experience in contract mining in Pacific Rim Countries. General Manager of New Zealand's largest Contract miner.

i have a vast experience in mining industry of about 22 years. I have 3 years of abroad experience in Kenya and Uganda

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

27 yrs mining experience, 20 underground, 7 open pit experience in all phases of underground mining. operated haul pak and blast hole drills and front end loaders in pits.

I have over twenty five years experience in technical (mine surveying) discipline. I have worked in very busy offices and have experience in multitasking. I am friendly, punctual, honest, good at working with others, can work under pressure, hardworking and I have a professional manner.

Senior Executive with forty three years of experience in the mining industry

Resume

State Diploma of Geometer Studies in engineering State Doctorate of Political Sciences - Option " International "

As a fully qualified Mining Engineer i am looking to offer my skills to earth resource projects.

I am applying for overseas MINING appointments

A professionally qualified Engineer and Maintenance Specialist, with a total commitment to excellent performance, combining experience that encompasses a broad range of Mechanical and Electrical Engineering disciplines.

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out