Resume - Hands-on engineering and construction individual with extensive experience in al...

Misco Jobs

Resume #62793

CONTACT INFORMATION:
View contact information...

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environment [tolerance for stress] in the area of refineries, oil & gas processing, power plants, petrochemicals and open pit mining. EPCM projects covered scope identification, engineering, brownfield & greenfield construction, turnover packages, and construction contracts management/procurement.
Ability to streamline procedures that improve productivity, cost controls and safety levels through expertise in:
Organization & Project Management Safety & Compliance Management
Preventive Maintenance & Troubleshooting Equipment API / ASME Code Specification
Specializing in:
GOSP's and WCTP's facilities Fossil fueled power plant and steam turbines
Tank farms and offsite utilities Compressors and pump stations
Onshore and deep sea loading terminals Plant subsystems fabrication and erection
LNG trains / Cryogenic equipment Field & yard fabrication – tanks, spools & bulk structural steel

Year Company - Location Client - Project Position
2007 - AMEC Americas – Canada ►DeBeers – Victor Diamond Project Site T/O Engineer
2005 - 2006 Worley Parsons – Iraq ►US Army Corps of Engineers - Restore Iraq Oil Project Area Engineer
2000 - 2004 Onyx & Co. – Canada ►Multiple Projects throughout Montreal Area Project Coordinator
1997 - 1999 Kellogg Brown & Root – Algeria ►Sonatrach Petroleum GL1K LNG Trains Overhaul Construction Engineer
1995 - 1996 Doyle Construction – Canada ► Multiple Projects throughout Montreal Area Site Coordinator
1993 - 1994 Norse Mekaniske A/S – Norway ► StatOil - Troll West Block 31/2 Onshore Support Mechanical Supervisor
1990 - 1992 Pipera CHP Plant – Romania ►S.A. Electrica - 2 × 3.5 MW Upgrade Project Plant Engineer
1987 - 1989 ThermoEnerg - Romania ► Cernavoda NPP PHWR CANDU-6 - Unit # 1 700 MW Engineering Technician
1984 - 1986 PromoTherm – Romania ►TPP South Bucharest - 2 × 100 MW Block Rehabilitation Mechanical Technician

Education &
Training Year University / Issuing Authority Degree Discipline
2004 - 2005 Quebec Ministry of Education Certificate Construction Management
2001 - 2003 U. of Montreal - HEC Graduate Diploma Operations Management
1995 - 1996 Dawson College Attestation of Studies CNC – Numerical Control
1994 - 1995 St-Laurent College Attestation of Studies CAD
1984 - 1990 U. of Bucharest – Polytechnic Institute M.Sc. - Engineering Mechanical

Professional
Membership European Federation of National Engineering Associations [FEANI] – EURING # 28633
American Society of Mechanical Engineers - ASME # 8604803
OSHA Tickets HSE / SHMP / Hazard Recognition / WHMIS / H2S / Fall Protection / First Aid / LOTO

Work Experience Details

2007 – to date Site Turnover Engineer - AMEC Americas
Responsible for final handover, site implementation of documentation acceptance, transfer activities from project & construction group to commissioning and client operations team. Developed team member's requirements and skill sets, roles and responsibilities, detailed assignment definitions. Defined document flow & methodology for preparation & submission of turnover packages w/ client. Compiled / reviewed & approved final documentation prior to client submission for transfer of care, custody & control. Managed QC records database, systems turnover processes, liaised w/ client personnel on system performance & quality record issues. Reviewed and approved construction contractor QC records, monitored status for compliance to specs / procedures, construction quality and turnover processes. Supervised preparation, content & flow of system commissioning manuals for customer acceptance. Coordinated / monitored project punch lists, ensured / verified punch lists & check sheets mitigation and sign off. Performed process systems walk downs, reviewed & established the completion status, identified outstanding items to be completed for final system turnover to the client. Responsible for off-sites & utilities mechanical completion and commissioning. Acted as site construction engineering manager cross-shift.

2005 – 2006 Area Mechanical Engineer - Worley Parsons Iraq JV
Performed equipment assessment, engineering analysis for projects ranging from WCTP / GOSP, pumping stations, offshore loading terminal to well workover / water injection stations. Covering North Area of Operations, technically accountable for evaluating & selecting process mechanical equipment needs, defining / specifying equipment, scope of work definition, budgetary estimating, generating mechanical datasheets / specifications, issued requisitions packages, and ensured equipment and machinery upgrading / installation is correct. Established supplier's requirements' ensure that process equipment is developed to operating parameters in compliance w/ current codes / plant requirements. Ensured that process equipment performed to specification, developed turnover documentation, ordered and cost justified capital equipment, trouble shot and solved specification problems. Involved in the early stages of the ABOT Upgrade Project to evaluate tenders for the Deep Sea Terminal contract and followed through after contract award as the South Area Support Engineer on the revamping contract for construction, installation and commissioning of the loading terminal. Reviewed vendor documentation, issued technical bids evaluation, reducing capital cost in compliance w/ FAR. Member of Squad Check Review for incoming packaged equipment.

2000 – 2004 Project Coordinator - Onyx & Co.
Assisted in operating a small general construction company.
Responsibilities included blueprint review and project analysis, preparation of construction documents, scheduling, subcontractor's selection and ensured compliance with specifications, codes, safety standards in desired timeframe, quantity and quality. Provided technical assistance to field engineers and craft foreman. Managed the toolbox meeting to assure compliance with safety and health regulations. Analyzed all applicable requirements [company, customer, regulatory] and developed work guidelines which encompassed the areas of performance, quality, and schedule and budget compliance. Ensured that all drawings, reports, schedules and other documents met the requirements of all relevant legislation, specifications, procedures and codes of practice. Ensured that all engineering support provided satisfied the appropriate asset safety case. Enforced that performance standards were not compromised by engineering activities. Contributed to the development of the workload, schedules and estimates for all the individual work scopes and integrated plans.
Remained with the company until legal dissolution.

1997 – 1999 Construction Engineer - Kellogg Brown & Root
Duties included construction and coordination, systems inspection and isolation for shutdown/maintenance, commissioning of the LNG plant and loading terminal. Responsible for off-sites mechanical outstanding punch lists, performed detailed precommissioning, prestartup inspections Interfaced on behalf of the subcontractors regarding area access, determinate local area requirements, planned / organized work with anticipation for needs, potential problems with foreign and local national subcontractors. Completely overhauled the LNG / LPG process equipment and facilities for Sonatrach - National Algerian Oil & Gas Co. Rebuild the concrete seawater intake and refurbished the vertical centrifugal pumps eliminating the outdated equipment. Overhauled / refurbished specific LNG process/mechanical equipment, valves, pumps, gas reinjection compressors, exchangers, and related piping / fittings up to 42". Removed & replaced waterwall, superheater and damaged structure / refractory for 360t/h @ 70bar Mitsubishi boiler. Coordinated and supervised up to 200 construction personnel to assure preventive maintenance, breakdown repair and new equipment implementation.

1995 – 1996 Site Coordinator - Doyle Construction
Estimated work orders, ordered material and equipment, planned and scheduled manpower needs by craft. Scheduled work execution, obtained necessary permits, supervised craft activities, coordinated work plan to avert bottlenecks, monitored progress and performed QA/QC tasks. Conducted and documented weekly safety meetings. Prepared site daily reports and documentation as required. Accrued responsibilities included choke point troubleshooting, liaising with customers, organizing outside repair and service work, advising / ordering parts / materials and service on a range of construction equipment.

1993 – 1994 Mechanical Supervisor - Norse Mekaniske A/S
Mechanical technician jointed to a dedicated team for assemblies checks, testing and repairs of hydraulically operated cylinders and lifting equipment. Performed pre and post maintenance checks on equipment to ensure efficient and safe operation. Duties included monitoring the calibration and inspection of the testing bank, inventories and ordering replacements for unserviceable tools. Developed equipment downtime reports, prepared logs for repairs / preventive maintenance and in service hours. Ordered, received, stored and issued spare / repaired parts. Identified, recommended and implemented improvements to line procedures, equipment and/or facilities to enhance the productivity, quality or safety of products, processes and/or procedures.

1990 – 1992 Plant Engineer - Pipera CHP Plant
Major fossil fueled TPP equipment included 2 x 50t/hr B&W boilers @ 450 °C & 40 bar, 3 x 100Gcal/hr @ 2200 t/hr hot water generators, 2 x 3.5 MW ABB steam turbines, water treatment plant, heavy fuel oil / gas storage & heating facilities, steam / water distribution systems and voltage transformers. Managed, planned, evaluated and coordinated the execution of preventive / predictive and corrective maintenance, as well as outages. Successful capital projects include major upgrades to the heavy fuel / BM system and water treatment plant resulting in an annual savings of around 5%. Coordinated major retrofitting outage - 65% boiler waterwall tube replacement and turbine overhaul. Assisted and acted as the plant liaison with outside agencies such as NPG – national power grid, corporate office departments and outside contractors. Supervised unionized employees within the confines of the collective bargaining agreement.

1987 – 1989 Engineering Technician - ThermoEnerg
Provided on-site construction support associated with the fabrication and installation of the CANDU type pressurized heavy water reactor cooling systems. Monitored daily construction progress, technical assistance, QA/QC and checked installation for project design conformance. Verified and documented that the system/equipment and utilities were erected and built to fulfill its purpose and specified requirements, operate in a safe, reliable, and consistent manner. Recorded field changes, completed post construction punch lists. Assisted with onsite fabrications, substructures, outfit of piping and mechanical equipment including testing and turnover. Conducted joint [with HSE representative] routine job safety audits, logged mechanical PTW such as Confined Space, Safety Clearance, LO/TO.

Work Experience prior to 1987 – upon request.
References – upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2651 to 2700 of 3444)

Go to Search Parameters...

Brief Description

Hard worker, fast learner, entry-level recruit

This is sourabh ghosh,a graduate (fresh) metallurgical engg. student from India, seeking related jobs abroad or within the country as early as possible.

Possess excellent interpersonal skills and organization skills;• Able to adapt and work within a dynamic environment;,Willing to work under pressure

Planning and supervision of on and off shore construction and logistical projects in remote areas of S.E. Asia for over 20 years. Cable Landings and burial works, diving training and operations, marine operations, oil and gas exploration support activites.

Proven ability to provide Industry initiative and leadership. 20 years of experience with all aspects of integrated instrumentation, software design, project management, and installation of projects. Projects of various magnitudes ranging from board level to major industrial development.

Project Controls / Planning / Scheduler

Coal Procurement Specialist, Foreman, MSHA Certified

40 years in the land surveying profession, 30 years as a Licensed Land Surveyor, Multi-state Licenses

Telecommunications Professional Engineer with strong analysis capability, deep knowledge on telecommunications networks and telecom business processes. Outstanding operating, managing and administrative skills. Proficient usage of office utilities and advanced expertise with excel macros.

International Trade such as Import & Export Business, Offers, Sales Promotion, Market Research, Different Business Reports / Information's, Estimations and Future Business Plans beside some Administrative Work etc

Almost twelve (12) years of experience as a Lead Document Handler with Solid Professional involvement in the Document Management System of Various Major Projects on JGC Philippines, Inc., namely Oil Wharf Expansion Project in Caltex Batangas, BAPCO Kero Merox PJ, K2U ,one of the

A Senior Financial, Systems and Accounting Manager with significant experience in the development, creation and management of accounting and reporting systems gained both internationally and domestically. Have worked in the United States and the United Kingdom for Citibank, Xerox, Yale, Louis Dreyf

Cartographer for oil and gas

Financial accountant - 12 years experience - oil & gas

Field Service Engineer

Mechanical engineer (4 yrs degree) with appx 15 yrs exp in Contract & Project management. LOOKING FOR CHANGE IN MIDDLE-EAST, CANADA OR INDIA (AVAILABLE FOR IMMEDIATE START)

During my university and professional work, I acquired a solid experience in the field of the program coordination, the logistics and the financial management.

Working as a safety officer in petrochemical company with 5.5 years of experience .

Highly qualified in security, safety and rescue work, a lot of experience in helicopter rescue, work and training camp experiences, military education, calm, reliableand flexible

Qualified Boilermaker, Current Bluecard, Worsley inducted, MC License, Confined spaces trained, Currently studying Cert 4 in OH&S

Seeking a position as an Exploration Geologist/ Mining Geologist/Resource Geologist, utilising my past professional experience and educational background

Instrument Specialist with over 13 yrs experience in both domestic and overseas facilities.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

I'm a certified SAP SD consultant with a domain of 2 years in marketing.

Dear Sir,

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

I have worked in management positions for over 15 years in both the construction and manufacturing industries. I have had up to 120 employees under my supervision at any given time. HR, production, purchasing, documentation and inventory all under my supervision. Workflow and quality #1 priority.

Construction / mining / environmental

I have experience in Project management and planning, Maintenence Management and planning, Civilworks, Mechanical and electrical experience

Ph.D. in Geology from IIT kharagpur, M.Tech.in Geology from IIT Roorkee, India

Troubleshoot equipment an identify need for new equipment and/or modification’s to existing equipment, optimizing throughput and minimize equipment downtime.

BSc Applied Geology, with experience in near surface gold exploration as well as geological modeling of various ore bodies at a consultant level. Knowledge of mine design software such as Datamine and also GIS software. Competent traveller.

CSWIP 3.1 Welding Inspector, ASNT Level-II in NDT's RT/UT/MT/PT, ISNT Level-II in leak testing methods, Over 7.5 years in QC & Inspection with reputed Indian Multinational

I am a seasoned American Registered Professional Civil Engineer with a record of repeated success on diverse Administration & Management career experiences through out the United States, Central America, and the Middle East.

20 + Years Experience / Supervisor / Heavy Equipment / Haul Trucks / Will Relocate

Having 16 years experience in pumping and assescories of Pipe line, Motors, Engines, System study, Trouble shooting etc. Having abroad experince. Visited Lao PDR, Thailand, Srilanka. Handled Project works at varoius sites in India and in Abroad.

EPLAN, Siemens SIMATC WinCC Step7, Ladder Programing, Rockwell Automation SW, Function Block Logic Programing, Statement List Logic Programing, AutoCadEnergy Solutions Leak Detection Tools (Pipeline Studio, ESIForms)Microsoft Office (Word, Excel, Power Point, Visio), MS Projects, MS computer OS

A high qualified mechanical engineer, Looking for challenging and rewarding career. My major Industry experience has been with a CAT Dealership in KSA; however my Sales & technical skills give me versatility within any Business which seeks excellence in product support functions.

I am a graduate metallurgical engineer with experience in melting of steel and cast iron. I have also worked as a corrosion engineer.

I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

licensed automotive technician(redseal endorsement)other skills, welding, autobody, automotive electrical

I can work with any environment

HSE Manager, Advisor for International Oil/Gas Company, Led Assets to top quartile performance. Graduate engineer and Certified Safety Professional

Dedicated hard worker with 10 years mining experience.

Chemical engineer seeking new oppertunities

I have previously worked as a Mechanical Engineer for a Japanese EPCC Company (Shinryo Malaysia Pty Limited) for five (5) years specializing in Quality Assurance / Quality Control. My last project for Shinryo Malaysia was for Malaysia’s largest Oil & Gas Company Petronas in Helsinki, Finland.

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

Experieced in reliability improvement by implement RCA, RCM and Condition Monitoring technologies. Certified as Vibration Analyst Category III.

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

HR, Payroll, Operations

First Prev 51 52 53 [ 54 ] 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out