Resume - Principal civil/structural designer

Misco Jobs

Resume #63650

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

To fully utilize my twenty-six years of extensive and progressively responsible design and detailing experience as a principal civil/structural designer providing unique and creative solutions to difficult engineering problems.

EXPERIENCE

02/07 – 09/07 Harris Group Inc.
1100 Spring St., Suite 300, Atlanta, GA (404) 815-6789
My responsibilities included creating and revising structural steel design drawings of a replacement air cap on the No. 5 tissue paper machine for Georgia-Pacific in Palatka, Florida. I edited 2D design drawings using AutoCAD 2005. I was also responsible for checking shop drawings and returning them to the detailer, communicating running design changes with the other discipline leads and the field during construction and maintaining document control. I was the CAD lead for this project as well as the lead structural designer.

10/06 – 12/06 Fluor Corporation
100 Fluor Daniel Dr., Greenville, SC 29607 (864) 281-4400
My responsibilities included creating and revising reinforced concrete and structural steel design drawings. I edited the 3D models using Frameworks Plus while the detail design 2D drawings using AutoCAD 2004 and Microstation J. I was also responsible for communicating running design changes to other discipline designers and maintaining proper documentation.

1/05 – 4/06 Breshears/Thornton Engineering Consultants, Ltd.
1300 SW 5th Ave., Suite 500, Portland, OR 97201 (503) 678-2434
My responsibilities included preparing and revising reinforced concrete and structural steel construction drawings. Additional responsibilities include maintain integrity of CAD files and insure adherence to established CAD standards by CAD team, coordinate design interface (at CAD level) with other disciplines to insure accuracy and provide input to engineers with regards to schedule and detailing. B/TEC provides construction documents for all Willamette/Weyerhaeuser paper mills nationwide.

8/01 – 11/04 Tetra Tech FW Inc. (formerly Foster Wheeler Environmental)
3200 George Washington Way, Richland, WA 99352 (509) 372-5800
My responsibilities as a member of the Idaho Spent Fuel project located at INEEL in Idaho Falls, Idaho included preparing reinforced structural concrete design drawings, maintain integrity of CAD files and insure adherence to established CAD standards by CAD team, coordinate design interface (at CAD level) with other disciplines to insure accuracy and provide input to engineers with regards to schedule and detailing. As a member of the Second Line of Defense project team, my additional responsibilities included acting as CAD lead on an as-needed basis, act as the design lead for smaller teams of designers and drafters and provide support and guidance for off-site design teams and subcontractors while they were on-site for the initial site evaluations and documentation phase. Assist I.T. staff in set-up and maintenance of desktop and laptop PC's including upgrading and troubleshooting.

6/00 – 8/01 Breshears/Thornton Engineering Consultants, Ltd.
See description above.

12/99 – 6/00 Lawrence Livermore National Laboratory
7000 Vasco Rd., Livermore, CA 94550 (925) 422-1100
My responsibilities included prepare and revise structural steel construction drawings for the National Ignition Facility (DOE #W7405). Conduct as-built survey of new construction and provide fabricator with revised connection details. Perform material take-off of completed steel construction drawings; provide weekly status reports and estimate man-hour requirement for each task within my area.

6/99 – 12/99 British Nuclear Fuels Limited
3070 George Washington Way, Richland, WA 99354
As the structural department CAD lead for the Pre-treatment building team, some of my daily tasks included maintaining the integrity of all dept. CAD files; insuring standards were adhered to by dept. members and provide coordination of design with other disciplines. I performed material take-off estimates, developed and checked design standards and produced structural concrete 2D drawings and 3D renderings utilizing MicroStation SE and Frameworks Plus for proposed nuclear waste vitrification project at the DOE / Hanford reservation.

10/98 – 6/99 Lawrence Livermore National Laboratory
See description above.

2/98 – 7/98 Fluor Daniel Inc.
One Flour Daniel Dr., Sugarland, TX 77478 (281) 263-1000
My responsibilities included preparing and revising reinforced concrete and structural steel construction drawings for chemical plant client. Provide plant layout drawings for new railroad spur(s).

9/95 – 2/98 Breshears/Thornton Engineering Consultants, Ltd.
See description above.

3/95 - 9/95 Basic Systems, Inc.
10901 Clay Pike Rd., Derwent, OH 43733 (740) 685-2511
My responsibilities included preparing and revising reinforced concrete and structural steel construction drawings for Shebelinka gas refinery near Chervonii Donets, Ukraine. Provide quantity take-offs for all materials including concrete anchor bolts, provide bolt manufacturer with accurate accounting and specs for all bolts and inspect prior to shipment to site.

1/95 – 3/95 The Pritchard Corp.
11401 Lamar Ave., Overland Park, KS 66211
My responsibilities included preparing and revising design drawings for reinforced concrete and structural steel as part of a refinery expansion near Houston, Texas. Structural steel detailing and underground utility designs were part of the task.

9/94 – 1/95 ICF Kaiser Engineers Hanford
1200 Jadwin Ave., Richland, WA 99352
My responsibilities included preparing and revising design drawings as a member of the Multi-Function Waste Tank Farm project team (DOE #W236A). Design elements consist of reinforced concrete structures, structural stainless steel detailing, and underground utilities. Paper space and external reference (Xref) features were used extensively.

7/93 – 9/94 Hopper & Dennis Engineering
314 W. 15th Ave., Vancouver, WA 98660
My responsibilities included researching project history, maintaining files of all pertinent information, producing designs of grading/drainage plans including hydraulic calculations, an earthwork balance, research and design vertical and horizontal control for underground utilities and submit for approval to each agency. General office tasks as required including drawing and document control, field inspection of construction and QA/QC of drawings. Tasks were accomplished utilizing HASP Release 4.0 engineering and architectural software, AutoCAD HydroCad Release 3.2 and Civil Tools software.

4/93 – 7/93 International Technologies Corp.
1100 Jadwin Ave., Richland, WA 99352
As a contract drafter responsible for compiling, collating, comparing and all under/aboveground utility plans within the 100 B/C Reactor Area at the Hanford reservation as part of the decommissioning and large-scale reclamation plan. Prepared all drawings, figures, estimating sheets and tables using AutoCAD, digitizer, pen plotter and LaserJet plotter.

11/92 – 1/93 J.H. Kelly, Inc.
821 Third Ave., Longview, WA 98632 (360) 423-5510
As part of a bidding task force I was responsible for identifying all concrete embed items and anchor bolts and creating an organized spread sheet that would allow an accurate accounting and provide fabricators with a basis to estimate the cost of manufacturing the items. This was a very fast track bid and required a very high degree of accuracy as the bidding for this project was very close.

8/92 – 11/92 Harris Group, Inc.
1750 NW Naito Pkwy., Portland, OR 97209 (503) 228-7200
As a contract structural designer, I was assigned to produce structural steel plans, elevations and detail drawings for a large paper/pulp industry.

2/92 – 8/92 J.H. Kelly, Inc.
821 Third Ave., Longview, WA 98632 (360) 423-5510
As an estimator in the Ferndale, Washington office I prepared construction bids by conducting material take-off and securing quotes from sub-contractors for structural and mechanical projects. As a field engineer I was responsible for documentation, correspondence and coordination of subcontractors and as client liaison.

7/90 – 2/92 CH2M Hill (formerly VECO Engineering)
1313 Bay St., Bellingham, WA 98225 (360) 676-1500
As a senior civil/structural designer assigned to two separate task forces, my duties included field inspection, detailed design and checking of access roads, grading plans, storage tank & powerhouse foundations, underground utilities and an effluent treatment plant at regional refineries.

1/90 – 7/90 Udelhoven Oil Field Systems Services
184 E. 53rd Ave., Anchorage, AK 99503 (907) 344-1577
As an as-built drafter working in the Kuparuk oil production facilities on the North Slope of Alaska, I was responsible for checking and drafting electrical loop diagrams, wiring diagrams, cable tray routing plans and elevations. I also prepared piping drawings by checking them against existing field data.

9/89 – 1/90 Alaska Anvil Inc.
509 West 3rd Ave., Anchorage, AK 99501 (907) 276-2747
As a mechanical designer, my duties included initial design for a replacement of existing oily tanker ballast water treatment system and modify existing plant drawings for local tie-in at the Alyeska pipeline company terminal at Valdez, Alaska.

3/87 – 9/89 Fluor Daniel Alaska, Inc.
700 'G' St., Anchorage, AK 99501
My responsibilities consisted of structural & mechanical design to modify existing structures to interface with new equipment at Kuparuk oil production facilities on the North Slope of Alaska. Numerous and frequent field trips to remote facilities were required to insure proper final design and installation.

4/86 – 3/87 Alaska Development Consultants, Inc.
5350 Arctic Blvd., Suite 200 Anchorage, AK 99503
Design drafter. Details upon request.

12/84 – 4/86 R & M Consultants, Inc.
9101 Vanguard Dr., Anchorage, AK 99507 (907) 522-1707
Design drafter. Details upon request.

8/81 – 9/84 Centrum Engineers
9101 Vanguard Dr., Anchorage, AK 99507
Field inspector and civil drafter. Details upon request.

EDUCATION & TRAINING

* Associate of Science, Petroleum Technology, Kenai Peninsula Community College, 1981
* Graduate, Pipe Design School, Fluor Daniel Alaska, 1988
* Attended University of Alaska, Anchorage, School of Engineering, 1989/1990
* Completed Advanced Structural Strength & Materials, Refresher Training, Christenson Engineering, 1992
* Completed AutoCAD Release 12 Paper space/Model space & Xref course, ICF Kaiser Engineers Hanford, 1994
* Completed Geometric Dimensioning and Tolerancing course, 1999
* Completed MicroStation SE 2D & 3D CAD training, BNFL Inc., 1999
* Completed Frameworks Plus CAD training, BNFL, Inc., 1999
* Last sat for Engineer-in-Training (EIT) exam, 2002
* Graduate, Dale Carnegie Personal Improvement course ditional information including your personality, hobbies, references, citizenship, etc.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 3126)

Go to Search Parameters...

Brief Description

Underground Dump Truck Operators

Drillers Assistant qualified!

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Engineer / Management / Accounting / IS

Project Controls Manager, with international experience in planning, scheduling, cost control, contract administration, business development and consulting services. Project management software: Primavera, MsProject, Material Manager, Cost Control. Languages: English, Spanish, some French & Italian.

i have three month experience in the oil field and one year experience on the mining field as a junior geologist. my duties are core logging,sampling, underground mapping and data acquisition,and Running/Monitoring (data collection) and processing of crude oil to the surface.

Geological engineer with one year experience in RC, Rab and Auger sampling and logging coupled with knowledge in MapInfo and introduction to Surpac

Instrumentation Technician/Trainer/QA/QC

Masters in Mechanical Engineering , with CAD/CAM and FEA courseowrk , Done Maintenance Engineer job in Textie indutsry , Undergarduate Internship in Desiging and Graduate Internship in Desiging and Analysis , Handled 3D softwares like CATIA , Pro-E and 2D software like Autocad

Extensive experience in hardware and software testing. Executed regression tests. Logged defects and participated in defect prioritization and verified fixes.

To pursue a career that will give me the opportunity to fulfill my ambition, acquire the training and experience necessary for professional and personal growth, to be able to share my competent, skills, knowledge, hard work and discipline in this company.

geophysicist

Senior Professional Geologist

Graduate degree in mineral processing engineering. Having more than 6 years of work experience in china clay and beach sand mineral industry.

I am currently Regional Safety Manager with Thiess John Holland in Melbourne Australia. I have extensive rail, mining and construction experience and have been involved in these industries for over 15 years. I have international experience, working with the Taiwan High speed rail project.

Specialized in designing using Pro-Engineer in Automobile industry, consumer and power transmission industries.

Principal civil/structural designer

Research Experience: Polymer solutions and adsorption behavior.

I am a Mechanical Engineer with a background in Electronics Technology. I have worked 2 summer for a Fording Coal Ltd. as a Mechanical Engineer. Currently I work for Weyerhaeuser as a Maintenance Engineer. I wish to back to the mining industry.

I am a Mining Engineering who graduated in 1999. After going through graduating training, I was appointed Overseer Miner at an Underground mine and then Shift Foreman at an Open pit mine. I have used the following computer packages, Lynx mining and SurpacVision.

I am looking for permanent employment at a company where I can use my training and experience to perform my job function. I would like to work for a company where advancement in to management or some other professional aspect of the company is a possibility

Seeking challenging rewarding career opportunity with a progressive innovative company utilizing leadership and management skills

I am a recent graduate from the Haileybury School of Mines in the Mining Engineering Technician Program. I graduated with honours in August 2001

I am a experienced mining engineer having experience in drilling & blasting

Looking for Instrumentation and controls job

wv state underground mine black hat,wv state 06 red hat ,class a cdl license

Diesel plant fitter by trade experience and have worked with Caterpillar machinery

Fitter / Rig Mechanic. Overseas experience FIFO, All standard and preventative mechanical maintenance on all oil & gas rig systems, Please view attach resume. Thank you Regards Neil Hopper

Hydrogeological Technologist - 4 years experience in mining and water supply industries, International experience

Computer skills (MS Word, MS Excel, Power Point, Internet); 55 wpm typing speed with accuracy; Expertise in customer service; Leadership; Excellent time-management abilities; Energetic, motivated, and dedicated; Quick learner

Senior management professional with extensive experience in Management & Operations of IT & Telecom Networked Infrastructure and Systems, Managed Services, Information Security, Process Modeling, SAP Implementation, Consultancy etc across industry segments.

My geological background is unconventional, international, and interdisciplinary; from the petroleum and mining industries, university teaching in China and USA, petroleum-related research in Norway, to mining-exploration and management positions in Laos and Malaysia.

Marine Operations, Shipping, Logistics, Port Management, Ship Agency, Representation in Ukraine at port of Berdyansk

Dear Sir, Attached please find my resume for the post of Cad Designer. I am a Mechanical Engineer and working with a leading Manufacturing company as a Cad Designer / Engineer.

SEEKING CHALENGING CARRER OPPURTUNITY IN MINING FEILD MINING EQUIPMENT,DRILLING WORKS WORK IN ANY PART OF WORLD 1ST CLASS DEGREE HOLDER DELT WITH SPONTANEOUS HEATING IN MINES

8 years of professional experience in Administration and personal assistance.

Instituteof management Diploma, NVQ management level 4, Certificate of professional competence national & international road haulage, Confined space certificate of competence,CITB health & safety certificate, Excavators, Loading shovel, Dumper Trucks, Road rollers, HGV1 licence

Young haul truck driver eager to get back to work, trained on both articulated & rigied frame haul trucks.

Internship/Work Experience Chemical Process Engineering

Financial and management reporting system, financial & business process analysis, auditing, budgeting, taxation, financial planning and forecasting, performance management system, activity-based costing, market research and development, process and system documentation,

I ma an M.Tech (Mineral Processing), with 4 years work experience, both in industry and R & D. I have good knowledge on plant level process auditing and necessary computational skills. I have published three article on Enhanced Gravity Concentration Techniques which exmplifies my work potential.

Completed University at University of Science and Technology, school of Mines Tarkwa-Ghana. As an experience Geologist with about six (6) years post graduate working experience and extensive knowledge in both exploration and Mining operations.

Working with Kuwait Petroleum Corporation for more than 3 years, Masters in English Literature, Good in Ms. Office,Excellent communication & interpersonal skills, Excellent time- management skills, Multitasked, Maintains confidentiality, Self- motivated, Can work under pressure, Hard working.

Office & IT Skills

Sales, Engineering Project Manager

3 Years experience in Petrochemical industry, B Sc. (Eng), API 510 Inspector

I am Indian national working in Saudi Arabia as secretay, i have nearly around 4 years of experience in secretary,

Trained on Lock-Out and Safety,Plainer training,Stacker,Finger jointer,Trimmer,Grader

Masters in Materials Processing & Engineering ,B.Sc. Chemical engineering ,Metals Testing (Destructive and NDT), Metallography, Heat Treatment Techniques, Structure investigation, Failure analysis, Technical report writing

Graduate in chemical engineering having 11 years of expereince in Projects and Production.In depth knowledge in Sulphuric and Phosphoric acid technology for production and implementation of projects.Having overseas experience for handling project activities.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out