Resume - Rigger and Ropesman in Mining and Plant and Open Pit

Misco Jobs

Resume #68073

CONTACT INFORMATION:
View contact information...

DETAILS GENDER MALE
PLACE OF BIRTH ZIMBABWE
NATIONALITY: R.S.A. (SINCE 1989)
DRIVER`S LICENCE: CODE 10 / EC 1

EDUCATION Randfontein English High (Technical School)

1990 - 1992 MATRICULATION – SENIOR CERTIFICATE
* English 1st Language
* Afrikaans 2nd Language
* Physical Science
* Fitting and Turning
* Technical Drawings

LANGUAGES Fluent in English and Afrikaans
FANA-GA-LO (Ethnic language)

INTERESTS Woodwork, Bird Watching, Wildlife

PROFESSIONAL NATIONAL CERTIFCATE –N1 & N2
TRAINING RANDFONTEIN TECHNICAL COLLEGE – 1995 & 1996
* Engineering Drawing
* Rigging Theory
* Engineering Science
* Mathematics

RIGGER AND ROPESMAN RED SEAL CERTIFCATE
* Mining Industry Engineering Trades Training Board
Accredited By The Registrar of Manpower Training

ADDITIONAL DRIVER`S LICENCES
* 50Ton – Ton Mobile Crane (Autobos Training)
* Tower Crane - Remote Control Operated
(Autobos Training)
* 7Ton - Counterbalance Forklift truck
* Tractor

Professional Experience

NOVEMBER HARMONY GOLD MINE (PTY) LTD
2001 – to Present (Kalgold Metallurgical Plant and Open Cast Pit)

RIGGER AND ROPESMAN
Plant-
1. Maintain all chain blocks, electric hoist, slings, and shackles.
2. Changing pipes, motors, pumps and gearboxes.
3. Slinging in and out of agitation shafts.
4. Comply with government regulations and daily logbooks.
5. Operate 3 ton Manitou forklift.
6. Servicing of 3 ton Manitou, 16 ton P&H crane, 45 ton hyco crane,
Tractor and comply with government daily checklist.
7. Assist with relining of ball mills.
8. Install and remove conveyor belts.
CRANES:
Tower Cranes
1. Change ropes on tower cranes.
2. Set limits on tower cranes.
3. Dismantle and assemble tower crane.
All Terrain Cranes
1. Change liners on Symons cone crusher, 10 tons.
2. Change vibrating screens, 10 tons.
3. Change ball pinion shaft and grith gears, 5 tons.
4. Remove and install transformers, 24 tons.
Truck Mounted Cranes, 180 ton, 275 ton and 500 ton.
1. Remove and install jaw crusher and swing stock, 28 tons.
2. Remove and install ball mill gearboxes, 15 tons.
3. Install thickener tanks and rakes, 33 tons.
4. Install leach tanks, steelworks, gearboxes, motors and agitation shafts,
8 tons.
5. Install ball mill, 65 tons.
6. Change ball mills inlet and outlet bearings, 5 tons
7. Change ball mills inlet ends, 15 tons.
Hydraulic jack lifts.
1. Lift Symons cones springs to unchoke crusher.
2. Lift and support ball mills with load to change bearing, 190 tons.
Opencast Pit.
1. Install and remove pipes and cables down side wall, 180 meters.
2. Install and remove pumps, generators and transformers.
3. Install and remove pump and motor at 110 meters down sidewall on a cutback ledge pump station.
4. Rig-up of 70 ton dump trucks involved in accidents.
5. Install and remove 70 ton dump truck buckets, 18 tons.
6. Install and remove borehole pumps.
7. Install and remove of dam pumps and motor.
Smelting House.
1. Rigging of smelting furnaces.
2. Installation of gems table
3. Assist with smelting and the operation of gems table.

Other
1. Acting as foreman when foreman is away or on leave.
2. Knowledge of petrol / diesel engines including gearboxes
3. Knowledge of basic torch cutting.
4. Knowledge of basic arc and gas welding.

FEBRUARY 1998 to RANDFONTEIN ESTATES GOLD MINE (REGM)
NOVEMBER 2001 COOKE 3 MINE SHAFT
Purchased by
HARMONY GOLD MINE (PTY) LTD

RIGGER & ROPESMAN ON CONVENTIONAL, TRACKLESS AND
SHAFT ENGINEERING SECTIONS.

1. Splice of different ropes and constructions.
2. Operating of 15 ton p&h crane.
3. Lift and move of heavy machinery 22 tons. (underground)
4. Operate 8 ton mobi-lift.
5. Operate air winches.
6. Cut front and back ends on single, double and Blair drum winders.
7. Change pipes in shaft.
8. Change conveyor belts.
9. Move machines up and down in stopes.
10. Rerailment of loco`s and hoppers.
11. Sling machinery up and down shaft.
12. Rig up 20 ton dump trucks. (underground)
13. Comply with government logbooks, winder logbooks and daily checklist.

November 2001 transferred from Randfontein to Kalgold.

OCTOBER 1994 to Randfontein Estates Gold Mine (REGM)
FEBRUARY 1998 Cooke 1, Cooke 2, Cooke 3. (Different mine shafts)

APPRENTICE RIGGER & ROPESMAN
Qualified February 1998

APRIL 1994 to Greenhills Shell Service Station.
OCTOBER 1994 1. Supervisor of forecourt and car wash.
2. Dealing direct with customers.
3. Supervise valet service.
4. Cashing up and depositing money daily.

MAY 1993 to Temporary Learner Setter
APRIL 1994 1. Maintain Forging machines.
2. Services Forging machines.
3. Adjust settings on Forging machines.
4. Maintain heaters.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 3120)

Go to Search Parameters...

Brief Description

Maintance foreman cheif electrician certified electrician high med. low voltage certified mineforeman emt-m

Mechanical Engineer(Diploma) Around 20 yrs experience of Erection, commissioning & Maintenance work at 4 different modern continuous process Cement Plants up to 10,000 TPD and LOESCHE Germany India office.

Employed with Gold Eagle Mines as a Project Geologist. I graduated in July 2006 with a MSci Geoscience from Royal Holloway, University of London. Since graduating, I have been successful in gaining varied and practical experience.

Mechanical Design Engineer having the knowledge of AutoCAD, Solidworks softwares

I hold a bachelor of Mining Engineering (Hons) degree from the University of Leeds in England and a Masters of Business Administration (MBA) degree from the Copperbelt University here in Zambia. My working experience spans over a period of 10 years i.e. 9 years in mining and 1 year in the financial

Summary of Experience

Offering extensive education and experience in computer science, mathematics, electronics, physics, business, and accounting.

Highly effective Program Manager with 15 years experience successfully implementing multi-million $ capital investment projects with GE / Toshiba for industrial customers worldwide. PMP 2006, MBA 2003 plus Engineering degree. Holds P&L responsibility for $25 million of global turnkey projects.

About 10 years experience working for Copper and Cobalt mine. Experienced in both underground and Openpit minig methods. Proficient in the use of datamine mining software, and I'm conversant with both underground and opepit mapping

I wish to cooperate with a Mineral ,Gem and Fossil Company on Earth Sciences Exhibition in Athens, Greece

Catering

Looking for Diamond Sorter Position

I wish to apply for a position in mining, mine planning, Rock Mechanics, or any related fields. I have a COM Mine Overseers Certificate as well as a COM Rock Mechanics Certificate

A Mining Technologist with a wide range of experience in the mining industry, specifically opencast iron ore. Proven experience in the mine planning, especially short term production planning, together with production experience, provides a solid expertise base in hard rock mining. Very much a team

National Diploma in Mine Surveying (1993)(Zimbabwe School of Mines).Highly experienced in narrow reef underground mining. Use of Datamine, and proficient in MS-Office. Experience in mine valuation, planning, implementation of ISO14001 and OHSAS18001 systems. Underwent management delopment program.

Fabrication and Maintance Fitter Having 16 years expericence in Cement Industry

I have 22 years of experience in the mining industry, Blasting Certificate For Open Cast Mines; Blasting Certificate For Scheduled Mines; Detnet Blasting Certificate.

Bachelors Degree in Mining Engineering, Second Class Mines Manager Certificate of Competency (Restricted) from DGMS.

-Academic background -Professional experience -Personal development are given below for a suitable job position in refractory/steel industry

Heavy Plant Operator - 360 Excavators, Face Shovels rom 5 tonne to 200 tonne, Rear Dump Trucks from 5 tonne to 200 tonne. Loading shovels.

I have a Mining Engineering Degree and presently attending school at the University of Phoenix to obtain a MBA - Technology Management. My background encompasses supervision/management and project engineering while at BHP Copper (Magma Copper Co) in San Manuel, Arizona.

I am geologist specialising in Rock Mechanics. Well versed with RocK Mass classification and support design. Numerical modelling on Flac 3d with very good results.

I have over 10 years of quarrying experince ranging from operating face and loading shovels, dumper trucks, static plant also experiance of weighbridge operations and transport operations

Welder, Carpenter, Equipment operator

Maintenance fitter/welder

Rigger and Ropesman in Mining and Plant and Open Pit

Creative and highly results-oriented professional with significant sales and marketing experience, including high-level corporate communications, public relations, business development, project management and management of professional staff. Possesses strong ability to balance practical, analytic a

Results-driven Civil Construction Management Professional with extensive senior-level experience in the Supervision, Quality management, planning & programming, design and successful completion of large-scale civil and structural engineering projects worldwide.

MS of EE, Bachelors of EE and Mineral Processing Engineering. 5-year work experience as an honored senior engineer in field of coal processing technology; 2-year work experience with marketing management.

Mining Engineer with 17 year experience in mining environement in mine management and projects. Experience in opencast operations and have worked as General Manager for an amethyst operation. Been involved in projects as team leader in the expansion programme of the amethyst project

AUTOCAD 2D Designing and CATIA V5Knoweldge

•A professional with excellent communication, organizational, and administrative skills. •A team player capable of motivating others offering more than 10 years of progressive experience.

Versatile senior manager with extensive experience in maintenance, operations, and general management in both union and non-union mining and heavy industrial environments seeking a senior management position in either maintenance or operations.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

Work for JCI & Gold Fields as a geologist. Coal geology and gold mining geology/target generation/computer geological applications including GIS in operations and management.

I am an exploration geologist with 10 years plus experience in the resources industry on a number of projects in Africa, Indonesia and Australia. This includes over four years in Indonesia on Epithermal Au, porphyry Cu/Au and Sedex Zn/Pb style mineralization.

I am a junior Geologist with very strong remote sensing and GIS skills. I completed my M.Sc at the University of Ottawa in 2005 and worked at the Canadian Center for Remote Sensing as a research assistant and i'm currently working for Rio Tinto Alcan. I am fluent in French and English.

Been working in stone quarries 15 years

Civil and Mining Engineering, land development, mine operations planning, surveying, mapping, permitting, public meetings, project management, geological interpretation, ore reserves, production scheduling, AutoCAD, Vulcan,

Mining engineer, MBA, presently mine manager in coal mine in India.

20 yrs plus administration experience 17 yrs military career NZ Army/Navy. Highly capable working in a windows environment/organisations/planning skills. Enjoy working in time sensitive environments. Have no problem working in remote areas. Enjoy working as a team or autonomously.

Environmental geotechnist/geoscientist role

14 years of heavy equipment operation

Project Geologist experienced in target generation, exposure to Grassroot exploration to Resource defintion stage.

30 years experience in large underground coal mine with modern tech., techno-economic study of mine project

Candidate with Geochemistry background, looking for first job in industry. Exceptionally hard working with excellent computer and communication skills.

I am geologist with diploma at mining Technology. I have 10 experience years specilly at aggregates and cement industry.

10 years Mining and Construction - International Operations and Management experience, Bilingual mining engineer (English, Spanish).

An experienced Masters-level mineral exploration geologist with a good technical background and corporate skills

13 years in various senior financial roles with Rio Tinto in Australia, Indonesia and China. Currently with Arnotts as Financial Controller in Papua New Guinea.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out