Resume - Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geo...

Misco Jobs

Resume #68345

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geology. Work history includes geotechnical engineer/estimator in the construction industry; mine engineer at a bentonite mine, and the following experience as a geologist: research and development of oil field chemicals designed to remove CO2 & H2S gas; geologic mapping and map drafting - including cross sections, structural contouring and potentiometric surfaces; mud logger and mud engineer experience on oil and gas drilling rigs; logging drill hole cuttings on gold exploration and water well drilling projects; interpreting geologic (mud) logs and geophysical logs, chemical and geochemical data collection and analysis, and technical report writing; hydrologic and geologic mapping, computer aided drafting of isopach maps with 3-D applications; surface geophysical surveys (spontaneous potential, electrical resistivity); open pit (surface) mine surveying and drafting with AutoCAD; ground water flow path modeling using NETPATH; petrographic analysis, ore microscopy, fluid inclusion studies, and geotechnical engineering experience. Certified with 40 hours OSHA /HasMat training.

EMPLOYMENT & CONTRACT WORK
06/2007 to Present: As a geologist for Surbec Environmental, I performed field operations that included drilling supervision, soil and water sampling, slug and injection tests, and office work that included isopach/contour mapping of contaminant plumes with cross sections, ground water gradient maps and calculated 'K' values (hydraulic conductivity) for the contaminated aquifers on UST remediation sites. Presented isopach maps w/ cross sections and ground water gradient maps to State officials for approval of proposed remediation projects.

01/2006 to 03/2007: Mud Engineer with Halliburton/Baroid, Drilling Fluids Division. Experience includes drilling fluid services (drive-by and 24 hour service) for a variety of operators using large to small drilling rigs on vertical and horizontal oil and gas exploration wells drilled in Oklahoma, Arkansas and Texas. I developed a method of use for standard water base drilling fluid chemicals that created a tougher wall cake that helped prevent frequent lost circulation episodes in horizontal wells drilled in the Hunton Formation northwest of Enid, OK.

08 to 12/2005: Adjunct Professor of General Chemistry at Redlands Community College and Earth Science at Oklahoma City Community College (fall semester 2005). I also taught night courses in Physical Science (spring semesters 2001, 2002 & 2004) at Redlands Community College and Oklahoma City Community College while contracting and working other jobs and General Chemistry courses with Labs (spring 2003 & fall, full-time 2005) at El Reno.

04 to 07/2005: Sales engineer/geologist for a wireline service company. I made sales calls to various oil field operators in Oklahoma for open hole logging services. Duties included helping rig up/down and monitoring open hole logging operations in Oklahoma and Texas that included dual induction, gamma/gamma, density and porosity logs. Evaluated open hole logs for Sw and created a spreadsheet capable of determining Rw from SP where catalog values for Rw were questionable and/or non-existant.

02 to 07/2004: Technical director for an industrial/oil field chemical plant. I helped develop new chemicals for oil and gas well stimulation, CO2 and H2S gas removal at the wellhead, and iron chelating compounds. Devised a spreadsheet for chemical blends based on weight rather than volume that significantly improved the accuracy of large volume blends in the plant. Negotiated a contract for an uninterrupted supply of raw material crucial to a product that ensured the company's ability to meet increasing demand for that product. Recommended physical improvements and implemented standard safety procedures and that made the plant a safer, healthier place to work.

08/2003 to 02/2004: Mud logger on oil & gas exploration drilling rigs in Oklahoma (Anadarko Basin) and Texas (Permian & Ft. Worth Basins). Duties included those typically required of mud loggers that is; helped rig up/down and maintain equipment; collect, prepare, test and describe drilled cutting samples; monitor and document gas shows; prepare and present mud logs in a daily report to operator/company representatives.

02/2002 – 04/2003: Estimator/geologist for a foundation drilling company; I used geotechnical data to produce 3-dimensional images of the subsurface that greatly aided in estimating the cost of drilling large diameter piers for commercial construction projects in Oklahoma City and the Dallas/Ft. Worth area. I also designed spreadsheet models for estimating drilling jobs that greatly reduced the time and improved the accuracy of the estimates.

09/2001 to 02/2002: Structural geologic mapping and prospect development: I used drill hole data (mud logs & geophysical logs) to create structural contour and isopach maps using statistical/scientific software that rendered colored maps in 3-D for an independent oil and gas exploration company on leases in south-central Oklahoma that showed areas where drilling would likely be most successful. Water well rehabilitation projects using chemical and mechanical methods on large capacity irrigation wells for Braum's Dairy Farm and municipal water wells for the City of Enid. I designed an innovative chemical treatment based on chemical analyses of ground water that increases the specific capacity of water wells while destroying bacteria and neutralizing pH from prior acid treatment. Performed surface geophysical surveys in ground water exploration using electrical resistivity and SP methods for the Town of Ravia.

01/2000 to 08/2001: Sales Engineer/Project Manager, Layne-Western Company, 1011W. Harry St., Wichita, KS 67213. Duties included marketing and managing projects for a variety of water well services including water well drilling, water well rehabilitation, water treatment systems, pump repair and replacement, environmental and geotechnical drilling and sampling, and ground water exploration geophysical surveys. Experienced in job cost estimation for all of the above and in managing projects from beginning to end. Within the first 6 months as a sales engineer, I developed a single water well rehabilitation job for a small town in western Oklahoma into a $75,000 project that significantly improved the production of an entire well field and followed that by initiating plans for a proposed $1.3 million dollar nitrate removal system by Layne for that city.

09/1998 to 01/2000: Lovell, WY and Minco, OK. Contract work as a geotechnical engineer on the Greybull River Valley Irrigation Project near Cody, WY. I performed grade control surveys, identified soils, and calculated cut/fill volumes for the excavation of a five mile long irrigation canal. Relocated to Oklahoma and worked as an AutoCAD drafter for a surveyor.

05/1995 to 07/1998: Mine Engineer, Bentonite Corporation, Lovell, WY. I was responsible for mining operations at the Lovell plant from June 1995 to June 1998. Duties included supervising development drilling projects, designing and surveying new pits and volume calculations for completed pits, ore reserves calculations, and mine reclamation surveys. I worked with the plant manager, quality control/lab manager, and stripping/hauling contractor in coordinating mining activities to meet increasing production demands. The plant quadrupled production from 1995 to 1997 - setting an industry record.

1985-1995: Employment while attending South Dakota School of Mines & Technology:
Returned to South Dakota from Oklahoma in 1984, and attended college at South Dakota School of Mines and Technology. The following positions were held during the summer months and part-time while I attended college: Field geologist for Western Mining Corp. (USA), an Australian gold mining company in a joint gold exploration venture with Homestake Mining Company in the Black Hills of South Dakota. Fluid inclusion research on gold bearing quartz veins for Homestake Mining Company using a USGS heating and cooling stage mounted on a petrographic microscope. Geotechnical engineer for a civil engineering firm in Rapid City, SD. Field geologist at the Richmond Hill Gold Mine, a heap leach surface gold mine in the northern Black Hills. Duties included logging cuttings from reverse circulation drilling rigs, geologic mapping and cross sections.

1975-1985: Employment in the construction industry in Rapid City, SD and in the oil fields of Wyoming. Returned to Rapid City, SD upon discharge from active duty in the US Navy and worked as a concrete laborer and form setter for several years. In 1977, I earned a 2 year associates degree in Building Design and Construction from Western Dakota Technical Institute in Sturgis, SD and worked as an architectural draftsman at a lumber yard prior to migrating from South Dakota to Wyoming during the oil boom. In the early 1980's, I was employed as a rig hand for a wire line (oil well logging and perforation) company in Casper Wyoming, and later, as a field representative (landman) specializing in federal leases for Davis Oil Company in the Powder River Basin. Drilling activity declined in Wyoming before it did in Oklahoma and I moved to Oklahoma City where I found seasonal work as a construction laborer followed by temporary employment as a geologic map drafter and technical illustrator prior to relocating back to South Dakota.

1970-1975: Drafted during the Vietnam War, enlisted in the US Navy, trained in basic electricity and electronics as a Firecontrol Technician, served onboard the aircraft carrier USS Independence, volunteered for and served with the Navy's Special Forces (UDT/Seal Team - 21). Honorably discharged.

EDUCATION
1991 BS degree in Geology, South Dakota School of Mines & Tech., Rapid City, SD
1995 MS degree in Geology, South Dakota School of Mines & Tech., Rapid City, SD

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 3130)

Go to Search Parameters...

Brief Description

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Lead Hand with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills,

Diesel Fitter, Welding, Electrical, Pnuematics, Hydraulics, Horizontal and Vertical Boring, Precision machining, Earth moving Equipment, Crushers, Power screens, Fenner boxes, Jaw crushers, Pneumatic, Plumbing.

I&C Specialist with 20 yrs experience, Navy Sub Vet, PLC/DCS and project management

Master of Science in Geology and MBA from a leading Australian Business School. Having 25 yrs experience in mining industry in exploration, mining geology, financial analysis, consultancy and feasibilty reports and financial studies

Project Geologist

Mining Engineer From PT Freeport Indonesia

Application Manager - Control Valves and Engineered Products

Security, Administration, Logistics

Three years of domestic mining experience, and one year of international experience in South Africa, including strong technical skills with Mincom Minescape software applications and other packages like Talpac, Xpac, Xeras. Focusing in be efficient and effective

Qualified Quality Represetative from Germany and Metallurgist.

A position in mining that is both challenging and rewarding. This position would provide me with an opportunity to advance, develop and excel in an area for which I hold a genuine interest.

Mine Planning & Pit Designing by DATAMINE and its implementation in the field for all mines of the company.

Welder, Mechanic, Mill Wright, Maintenance

Engineer looking for job in Los Angeles area.

Bachelor of engineering degree in metallurgical and materials engineering (b.eng). grade: second class upper division.

Can operate 785C, 777B, 16H, 16G, 330, D11, D10, D9, Low-boy, and water truck. Would like to learn others if possible.

Qualification: B.E (Mining Engineering)

Responsibilities include the organisation and planning of all engineering work to be carried out on a daily basis also planned shutdowns, within the Milling and Crushing circuits.

Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.

I am a geologist looking for a new challenge outside the borders of South Africa. I have experience in exploration and mining geology. My mining background is opencast and underground. I am currently doing my masters degree on roof stabillity problems in underground coal mines.

Procurement, Supply Chain and Contracts Professional

18 YEARS AS SAFETY SUPERVISOR IN IAF, 02 YEARS AS A WORK SAFETY MANAGER,06 MONTHS AS A SAFETY OFFICER

I am post graduate in Geology from Pune University in 2003 worked as a Lecturer on clock hour basis at Rajaram college , Kolhapur. and searching for a job in mining.

I am actively seeking a position in the mining industry where I can utilize my pedigree education from Colorado School of Mines and get back to studying and working in the field that I am most educated and best suited for. I have 3 years experience as a lead engineer.

I am looking for an entry level Geologist position starting in the near future. I have been attending Simon Fraser University for 5 yearsand recently completed a Bachelors of Science. I've worked in mineral exploration for the past two summers in northern BC

Allround Operator with over 10years experience in open-cut mining. very interested in working overseas.

I am licensed Metallurgical Engineer. I have experiences in semiconductor and laboratory works.

I am an hse professional having qualifications like MBA,NEBOSH and IOSH, presently working in Afghanistan as HSE officer in KBR(UK) , I am willing to work any where in the world.

Modern Continental Construction Company has giving me the knowledge and experience of being a miner.

Shotfirer

Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

My career is defined by my successes in development of cost effective and efficient maintenance systems that ensure consistency, employee development, asset reliability and productivity improvements with quantifiable results.

Heavy Equipment Mechanic. I Have experience on a wide range of equipment from mining to construction. Experience rebuilding engines, hydrauilic and drivetrain components. Welding and fabrication skills. John Deere and Hitachi factory certified. Hard working and self motivated individual.

This is jeeva I have finished my diploma in mechanical engineering and working as a quality engineer in India, and I worked as a member of business development in engineering global solutions India in India. And I did my software course like solid works and COSMOS validation software pro-E and CNC p

22 years in operations.

Self motivated mining engineer with experience in remote northern locations in Canada and Alaska. Experience includes mine reclamation, project planning, exploration, and permafrost design.

Professional Sales Person with a sound Technical background. “Hands On” approach. A proven track record of strategic business planning, financial & corporate leadership experience conceptualizing ideas, seizing opportunities, building operations, leading highly successful new business development in

Design / Project engineer: Control & Automation - food & automotive industry

Diploma Engineer in MINING with more than 7 yrs of experience OBJECTIVE: To be coherent in to Mining Engineer / Mining Foreman to develop my work in string to Enhance and mettle my experience towards the company growth.

Im looking for mechanical maintenance Engineer position/maintenance planner.

I inspect equiptment for faults & malfunctions,determine repairs required,do the repairs required and test them.

Purchasing Management Experience Including Legal Contractual Oversight

Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geology. Work history includes geotechnical engineer/estimator in the construction industry; mine engineer at a bentonite mine, and the following experience as a geologist:

I am available for work & was recently working for P.S.N. through Orion Engineering, as a Senior Material Controller in Azerbaijan & Georgia, for the client B.P. Exploration (Caspian Sea) Limited and would be very interested in any future Oversea’s positions.

Blast Hole Driller & blast tech.

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Junior geologist with keen interest in exploration geology, especially in field work.

Solid background in Mobile Equipment Preventive Maintenance Planning and Scheduling, with strong emphasis on fleet maintenance management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out