Resume - I have over 25 years experience in QA/QC on petrochem, power and commerical proj...

Misco Jobs

Resume #68818

CONTACT INFORMATION:
View contact information...

Certifications AWS CWI #92010011, API 510 #2835, API 570 #7064 and CSWIP/BGAS Coatings 2/3 #1499

Professional Experience
05/07 – 01/08 Willbros Group Inc.
The Oman Construction Company TOCO Mukhaizna, Oman
Project QC Manager
Responsible for the implementation of all TOCO QA/QC site activities related to the fabrication, installation, testing and commissioning of on-plot/off-plot piping and wellhead tie-ins, for client Occidental Mukhaizna LLC.
Supervise and coordinate the activities of 8 QA/QC Inspectors, Document Control and NDE sub-contractors.
Author, review, approve and issue project specific procedures, ITP's, NCR's and final completion packages.
Schedule internal audits and participate in kick-off/close-out meetings.
Provide technical support to Project Management in avoiding and resolving quality issues.
Prepare and present project QA/QC reports for daily Project Management/client meetings.

03/07 – 05/07 Hudson Highland Group
Enusa/Westinghouse Int. Inc. Salamanca, Spain & Veratas, Sweden
QC Vendor Inspector
Responsible for vendor inspection of fuel nozzles for Westinghouse Int. Inc.
Provide technical support to Westinghouse Engineering Group in resolving quality issues.
Prepared inspection reports for Westinghouse Engineering Group.

10/06 – 12/06 Horizon Marine Group
Horizon Marine West Africa, Acura, Ghana
Senior Mechanical/Welding/Coatings Inspector
West Africa Gas Pipeline Project
Responsible for the offshore/onshore inspection of subsea pipelines for the Chevron West Africa Gas Pipeline Project.
Review and approve Horizon procedures/specifications for final phase of project.
Verified all aspects of the fabrication of 8",10",18"and 20" pipeline laterals and tie-ins, offshore and onshore.
Provide technical support to prevent and resolve quality issues.
Prepared daily inspection reports for client inspectors.
Prepared turnover documentation for submittal and approval of client.

8/06 Exxon Mobil
Socotherm Americas, Buenos Aires, Argentina
QC Vendor Inspector
Responsible for the vendor inspection/testing/qualification of subsea pipeline coating materials, for Exxon Mobil.
Performed inspection of Socotherm plant facilities and materials prior to testing.
Witnessed all phases of the coating applications and preparation of test samples.
Witnessed all field and laboratory testing of coated subsea pipe.
Provide technical support to Project Management Team in avoiding and resolving quality issues.
Prepare QA/QC reports for Exxon Mobil Engineering Group.

2/06 – 8/06 Willbros Group, Inc.
Willbros West Africa Inc., Choba, Nigeria
Project QA/QC Manager
EPC-4A East Area Offshore Platform Retrofits & Wellhead Tie-In Project
Responsible for the implementation of all Willbros QA & QC activities related to the fabrication, load-out and installation of 14 offshore platform retrofits and wellhead tie-ins, for client Mobil Producing Nigeria.
Produce and implement a quality assurance program/plan for the project that meets company/contract requirements.
Author, review, approve and issue project specific procedures as per contract requirements.
Coordinate and supervise the activities of 30 QA/QC personnel, onshore and offshore.
Schedule internal audits and participate in kick-off/close-out meetings.
Provide technical support to Project Management Team in avoiding and resolving quality issues.
Prepare and present project QA/QC reports during weekly PMT/client meetings.

9/99 – 1/06 Al Hoty Establishment
Saudi Aramco Oil Company, Saudi Arabia
Senior Mechanical/Welding/Coatings Projects Inspector
Haradh Gas Plant Project, Qatif GOSP & Pipeline Project, Abu Safah, Qatif & Safaniya Offshore Projects
Saudi Aramco Quality representative at Gas Plant, GOSP and Pipeline projects.
Saudi Aramco Offshore Quality Coordinator on Offshore Hook-up and Platform modification projects.
Review and approve design drawings, contractor's specifications, QA/QC program and personnel, for compliance to project contract requirements.
Implement, coordinate and supervise the quality surveillance and inspection activities to ensure that the contractor's work conforms to engineering design, company standards and applicable codes.
Monitor and assess the implementation of the contractor's and vendors quality programs, maintain the status of non-conformities and provide technical support to Project Management in avoiding/resolving quality problems.
Witness acceptance/commissioning tests and perform final quality check prior to acceptance of equipment and materials.
Witness in-process inspections and perform final quality check of all coating applications.
Review contractor's completion records for accuracy/adequacy and endorse as appropriate.
Prepare and present weekly project inspection reports for Project Management meetings.
Provide training and technical guidance to Saudi Aramco Junior Inspectors in equipment, piping and coatings inspection.

5/99 – 6/99 Pacific Technical Services
Tosco Avon Refinery, Martinez, California
2/99 – 5/99 Gulf Engineering Co. Inc.
Mobile Chalmette Refinery, Chalmette, Louisiana
1/99 – 2/99 Petrochem Inspection Co.
Murphy Refinery, Chalmette, Louisiana
API 510/570 Inspector
Conducted internal and external inspections, on plant equipment and piping, during scheduled maintenance shutdowns.
Coordinated with the NDT group after determining the appropriate NDT method to assess the equipment/piping condition.
Reviewed visual and NDE data to determine recommendations, to Plant Engineering, for repair/replacement.
Coordinated, monitored and witnessed the implementation of all repairs, replacements, NDE, PWHT and pressure testing.
Prepared and issued final equipment inspection reports for client.

8/98 – 12/98 QISI Inc.
National Steel Car, Hamilton, Canada
QA Welding/ Coatings Inspector
Performed vendor surveillance of railcar fabrication, for General Electric Railcar Division.
Monitored vendors quality programs from initial fabrication to shipping, as per the GE SPC program.
Conducted audits of the vendor's quality control programs and issued final inspection reports for GE.
Presented weekly inspection reports, to GE management, for resolving problems found during audits/surveillances.

3/98 – 8/98 Westinghouse / PCI Inc.
Tihange Nuclear Power Plant, Huy, Belgium
QA/QC Mechanical Supervisor
Developed, reviewed and approved Westinghouse QA procedures for 3 Steam Generator Replacements.
Responsible for the implementation of all Westinghouse QA activities.
Supervised and coordinated 5 inspectors performing audits of Westinghouse sub-contractors.
Prepared quality assurance audit checklists and participated in participated in audits.
Reviewed and approved audit findings, field change requests and non-conformance reports for quality compliance.
Presented quality status at daily client meetings and recommended actions to project management regarding QA issues.

2/98 – 3/98 MQS Inc.
Transamerica Refinery, Norco, Louisiana
1/98 – 2/98 Gulf Engineering Co. Inc.
Mobil Chalmette Refinery, Chalmette, Louisiana
API 510/570 Inspector
Conducted internal and external inspections, on plant equipment and piping, during scheduled maintenance shutdowns.
Coordinated with the NDT group after determining the appropriate NDT method to assess the equipment/piping condition.
Reviewed visual and NDE data to determine recommendations, to Plant Engineering, for repair/replacement.
Coordinated, monitored and witnessed the implementation of all repairs, replacements, NDE, PWHT and pressure testing.
Prepared and issued final equipment inspection reports for client.

4/97 – 12/97 Raytheon Engineers and Constructors Inc.
St. Lucie Power Plant, St. Lucie, Florida
2/97 – 4/97
Turkey Point Power Plant, Florida City, Florida
QC Project Supervisor
Responsible for scheduling and coordinating 15 inspectors for all client required maintenance, modification and in-service inspections, during planned shutdowns and St. Lucie Steam Generator Replacement project.
Reviewed and approved contractors inspection and test packages and assigned quality hold points, as per client quality program.
Interfaced with client Quality Management, Engineering and U.S. NRC Inspectors to assure implementation of project quality requirements.

9/96 – 12/96 G. D. Barri Associates
Turkey Point Power Plant, Florida City, Florida
Lead Mechanical/Coatings Inspector

4/96 – 7/96 Raytheon Engineers and Constructors Inc.
St. Lucie Power Plant, St. Lucie, Florida
2/96 – 4/96
Turkey Point Power Plant, Florida City, Florida
9/95 – 12/95
St. Lucie Power Plant, St. Lucie, Florida
1/95 – 5/95
Nine Mile Power Plant, Oswego, New York
9/92 – 12/94
Turkey Point Power Plant, Florida City, Florida
Lead Mechanical-Welding-Coatings Inspector

Professional experience from 9/92 thru 1/71 available upon request

Education and Training
2000 B.S. Mechanical Engineering Technology Hamilton University
2002 Introduction to SAP Saudi Aramco Oil Company
1990 Visual Examination, VT 1,2,3,4 E.P.R.I.
1989 Visual Examination, VT 1,2,3,4 Westinghouse N.D.E Institute
1984 Magnetic Particle/Penetrant Testing MagnaFlux Corporation
1977 ACI Concrete Design Virginia Department of Highways

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 3130)

Go to Search Parameters...

Brief Description

Operations, Technical, Contract, Leadership, Surface, Underground, & International Experience

I am a 2007-08 Mining Engineering graduate of the University of Kentucky's program with nearly twenty years of work experience in various capacities of Land Development including Project Management.

Seeking Millwright Apprenticeship - present skills - plumbing and heating, carpentry, general labour, trained operator - diesel clean-burn incinerator,maintain, trouble shoot assess problems and work in conjunction with Millwright and Welders

10 years of mining experience, started as mechanic worked my way up yo master mechanic,then to Maintenance Superintendent, I have been project Supertindendent as well.

Geology - exploration, Drilling, Computer data processing

my skills and qualification shuold be display to the employer

I am a journeyman plumber/gasfitter with 22 years experience, with 5 years experience as a facilities maintenance planner. I am looking for variety in my field of experience.

30 years work experience with expertise in coal & rock mining (all machinery), Administration, heavy lift experience, equipment Design & testing, supervision, purchasing, Training, OH&S, HACCP, safety & 1st Aid

Metallurgical assayer; national Certificate in metallurgical assaying; Cambridge Board advanced and ordinary level Certificate

Senior Manager with 30 years of proven strong management skills in problem solving management.

Proposal and Project Management

Project management,QA/QC,Construction,Maintenance

Leading Hand Service Crew

Civil/Structural/Mining Engineer (taking Structural Masters) with 6 years experience in a civil and mining environment as well as technical sales experience. Completed BSc in Mining Engineering and ongoing schooling in Masters in Mechanical Engineering (MCE). Willing to relocate.

Senior electrical engineer with experience in oil and gas , power generation and industrial projects

Truck driver

Diploma in mechanical engineer from india willing to work in international

I am ready to work as a helper/assistant.

SAP,JD EDWARDS,SYSTEM ANALYST,ABAPER,SAGE HR

An intelligent, hardworking and self motivated engineer. A strong Safety and Environmental awareness.

Completed B-Tech Mining Engineering at Wits Technikon (now University of Johanessburg) South Africa in 2004. Completed one year of underground diamond mining to obtain a permanent blasting certificate, and have 3 months underground gold mining exp. Since completing, have worked in Planning&Projects.

Rig operator

7 years diesel mechanic experience

Qualification- Graduation in mining engineering(B.E.,) Experionce- one year field experience in lime stone mining

Was responsible for maintaining city landfill. Duties included but was not limited to: loaded self with 980G Front Loader (FL) and hauled/moved bark with a 10 yard dump truck to the landfill then spread, shaped and compacted with a D9C and D6C Dozer.

Ten years experience as product planner/supply scheduler for Eastman Kodak Company in the clinical instrumentation division. MRP APICS Certification. Additional knowledge in Shop Floor Control, Capasity Management, Inventory Control. Worked closely with engineering, purchasing, assembly control.

MacLean Bolter operator

Post Graduate in Soil Mechanics and Foundation Engineering, professionally qualified Geotechnical Engineer having about TEN YEARS of work experience. Mr. Madan Kumar has comprehensive knowledge and vide experience of consulting services as a Geotechnical Engineer

Project Engineer - Antenna System, Installation Commisioning for Antenna, Product Approvals from Customer for supplies, Tender Preperation

Electrical engineer

I have done graduation in Commerce with first class and am about to finish my MBA in this year, I have vide knowledge of accounting and have BPO company experience

I would like to utilize my skills as a beltman and to learn more in the coal mining business.

Highly experienced project professional with broad engineering, maintenance and construction experience. Competitive by nature with a consistent focus on the “Bigger Picture”. Outstanding track record and highly adept at managing high-criticality maintenance and construction projects.

Over 10 years of Experience in the field of HFO based reciprocating engines, automobiles, all type of rotary equipments engineering and cement plant Mechanical engineering

I have worked in the open cut mining industry for 5-6 years in Australia as a Heavy Equipment Operator and Trainer Assesssor.

seeking for an employment in mining industry

Jumbo Operator, currently working in Western Australia. Looking for work in Canada. Will be obtaining a 2004 Working Holiday Visa for Canada

Young enthusiastic Mining Engineer (B.Tech Hons.; IIT - Kharagpur) just graduating with 120+ days of field experience in drilling , safety and scheduling. Good computer skills and a diverse course content in college.

Looking for job in mining industry.

Experience in Collection and processing of Ground Control Points data using Geodetic quality GPS receivers and LGO(Leica Geo Office & TGO (Trimble Geomatics Office)

MSc Mineral Production and Engineering Management, BSc Metallurgical Engin.: 7 yrs exp., Excellent communication , interpersonal and report writing skills, good supervisory and problem solving skills, can work under pressure with minimum supervision, quick learner, hard worker and self motivated

Webwork, Spring, Hibernate, DOJO, DWR, Joram, JSP, JDK 1.5, Jetty, Ajax, Tomcat, Oracle 8i,SQL Server

3years experience in Administration Assistant Roles and Receptionist also 6 months at Bunbury Regional Tafe in Certificate 2 Business Course.

Failure Analysis, corrosion, MS Office, Visio, Corel

boilermaker with fitting and welding experience in mining ,construction and hydraulics

3 years experience in shipbuilding as a piping design engineer. familiar with pipe routing, material estimation, drawing review, production co-ordination and documentation.

Mine Geotechnical Engineer

I have over 25 years experience in QA/QC on petrochem, power and commerical projects. I have a BS in Mechanical Engineering and hold current AWS/CWI, API 510 & 570 and CSWIP/BGAS 3/2 Coatings certifications.

Self-motivated, multi-skilled project manager & technical consultant with experience of a wide range of R&D and commercial based project work at SMT level. P&L responsibility for multi-million £ technical projects. Qualifications include BSc(Hons) Applied Physics, HNC Elect & Electronic Eng.

Graduated from The University of Nottingham with a BEng (honours) in Mining Engineering in 2003. Currently employed with The Mines Rescue Service, specialists in Health and Safety.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out