Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #69240 next resume »» CONTACT INFORMATION: View contact information... SUMMARY OF PROFESSIONAL EXPERIENCE * Mining engineer with more than five years postgraduate experience * Graduated at two mining universities: Ukraine and Germany * Working experience with coal (underground), gold, bauxite, dolomite, limestone, gypsum, clay, pozzolana * Operational experience: managing four quarries (5 millions t ROM), managing a dolomite open pit (4 millions t ROM), production scheduling, drilling and blasting, loading and haulage, stone preparation and quality control, negotiation with contractors, pumping, quality management, mobile screening and crushing unit, "i-kon" electronic detonation * Mine planning: mine modelling, pit design, pit optimisation, bench optimisation, mine infrastructure * Engineering: equipment selection, fleet simulation, CAPEX and OPEX estimation, audit, production cost optimisation, production record, calculation of profitability, identifying weak points in production process * Management: manpower of 150 in four quarries and 27 in stone preparation plant * Projects: drilling and blasting optimisation, mining of limestone with Surface Miner, ripping of gypsum and limestone with hydraulc excavator, percussion mining of gypsum (hydraulic hammer), dolomite dilution and recovery, stone-clay separation, sintering of different types of dolomite, operation with secondary fuel at dolomite sintering, online analysers, green- and brownfield projects in Russia EDUCATION 2002 RWTH TECHNICAL UNIVERSITY - Aachen, Germany Graduate of Mining Engineering (Dipl.-Ing., M.Sc.) 1998 NATIONAL MINING UNIVERSITY OF UKRAINE – Dnipropetrovs'k Graduate of Underground Mining Engineering (Mining Eng.) PROFESSIONAL EXPERIENCE 06/2008-present Lafarge-Nikolaev Cement/Ukraine Raw Material Manager * total management responsibility for all mining related activities in four quarries 12/2007-present Lafarge Cement Technical Center Vienna Mining Engineer - Department "Geology and Mining" 11/2005-11/2007 LHOIST – Limelette, Belgium Mining Engineer - Lhoist Headquarter department "Geology and Mining" * project work in Russia 03/2003-10/2005 RHEINKALK HAGEN-HALDEN GMBH–Hagen, Germany (LHOIST Business Unit) Quarry Manager – Dolomite open pit "Donnerkuhle" (2004-2005) * total management responsibility for all mining related activities Assistant-management (2003-2004) * Assistance in all administrative tasks SPECIAL TRAINING * Internal mine modelling training at present employer, Lhoist, various occasions * Staff management, 2 days * SURPAC training, 2 weeks * Production management in natural stone industry, 3 days * Security adviser in a quarry, 1 week * Training for general blasting operations, 1 week * Handling electronic detonation system "i-kon", 2 days * Geology in limestone and dolomites, 1 week * Rheinkalk introduction to limestone, 1 week * Lhoist introduction, 1 week * English courses in Business and Technical English ACADEMIC WORK AND PROJECTS October 2002 Degree dissertation "Operational, technical and economic comparison of hydraulic excavators to shovels at two gold surface mines of Muruntau and Kokpatas in Uzbekistan"; sponsored by "TEREX O&K Mining GmbH" 2002 INSTITUTE OF "MINERAL PROCESSING" Research Assistant * Working on wet gravity separation techniques and magnetic separation 2000-2002 INSTITUTE OF "SURFACE MINING AND DRILLING" Research Assistant * Involvement in preliminary surface mine design (cement) * Lecture preparation on mining methods and techniques June 1998 Degree dissertation with distinction "Economic and mine planning for the underground coal mine "Named after Geroev Kosmosa" with a focus on access, pillar and production optimisation" ADDITIONAL SKILLS Languages Russian: mother tongue German: business fluent Ukrainian: business fluent English: advanced Computer skills Excel, Word, PowerPoint Mine modelling SURPAC block-modelling, surface design, basic macros, Pit Optimiser Blasting Certificate Certificate of Competence according to * 20 of the German Blasting Law which enables the person to handle with and transport explosives, detonator cords and detonators View contact information... «« previous resume next resume »» Search Results (Resumes 1601 to 1650 of 3130) Go to Search Parameters... Brief Description Mining technician, Diploma in Mining Engineering, 6 years underground mining experience, 4 years at senior supervisory level. Currently Mine Captain responsible for development & production drilling & blasting operations, construction & capital projects. Good leadership skills. Computer literate. A1 grade machinist working on all machines in timber indust,tool setter and sharpener m/c setter also,4 year trained app city and guild london institute, driven most front loaders but no tickets as all in saw mills when the driver was working on other m/c. also work on contract for australia post . I am a B. Eng. (2002) graduate from McGill University in Mining Engineering. I have accumulated 25 months of work experience in mining related fields. I am a permanent resident of Canada. I am willing to relocate and work onshore or offshore. I have recently graduated from Carleton University with a Bachelor of Engineering - Mechanical. My fourth year project involved the design of an Autonomous Underground Mining Vehicle in which I designed and implemented a PEM fuel cell and ultra capacitor hybrid propulsion system. Bsc (hons) Degree in Electrical Engineering form the University of Zimbabwe Graduate trainee Engineer for one year eight months with Gaths Mine. Recently completed 40 hr underground mining class, and obtained certification. I am a hard worker with high regards for safety. I have experience working with and maintaining varios types of machinery, Young engineer with international production experience in engineering and operations, advanced university geotechnical studies, bilingual, dual citizen, seeking a position in geotechnical engineering and ground control. Ghanaian working with African Mining Services base in Ghana as Heavy Duty Equipments and Crusher Maint. Planner Sales Planning & Execution, Sales Budgeting & forecasting, Senior level Negotiation, New Product introduction, Team building & Organizational leadership 4 years on surface and undergrond equipment no incidents or accidents Bachelor of engineering in mechanical engineering and have more than 18 year experience in mechanical maintenance & projects, condition mointoring in cement plant and steel plant Key Skill: Hydraulics - Electrical control system - Mechanical 5 Years with sandvik mining & construction s.a.2 Years at sandvik field services.Have been promoted as senior technician 10 months ago.qualified in the south african air force as a aircraft mechanic on the puma helicopter.i specialise in ejc 115-axera lp drill rigs.this is my passion. I’m looking for a new project. * I am a qualified Chartered Accountant (UK) a holder of Association of Chartered Certified Accountants (ACCA-UNITED KINGDOM), Association of Accounting Technicians (AAT-UNITED KINGDOM).CURRICULUM VITAE I have worked mainly on structural geology, exploration geology (boreholes) and applied geology. From February 2007 I’m working as Employer’s Representative Head Geologist in Ethiopia (Gilgel Gibe III Hydro Electric Power Project, EPC Contract). Since 2002 I’ve worked in Italy, France and Austria. Electrical/ Information and Networks Engineerin - Quality & IT Management Caterpillar diesel mechanic. I have been mining for about 8 years now With Eroc I was on the Development Bogger Before that Barminco at Plutonic WA as a Production Driller I was even thinking of maybe working overseas if the chance comes up US GAAP reporting manager for one of the largest oil and gas companies in Russia; 8 years experience in Pricewaterhouse Energy and Mining audit practice ACCA qualified from 1999 Have solid experience in US GAAP, IFRS, Russian statutory financial reporting, good knowledge of Russian tax Worked in the mining industry for 8 years (I love my work). I am a very keen hard worker. I am currently looking for a job that pays very well so i can set myself up financially. Mechanical Design Engineer Mining Engineer with more than five years postgraduate experience, mine planning, drilling and blasting, loading and haulage, production scheduling, equipment selection, mine modelling with SURPAC. I am full time cartographer I have more than 10 years of experience in logistics and 5 years in coal mining. Power Electrical Engineer (Power Transformer Designer) Competent with use of ECLIPSE simulation package; Proficient with use of LESA to analyze well logs; Ability to use VIRTUWELL (Fekete) to analyze multiwell performance; Able to use ChemCAD to simulate oil field processes; Interpretat Free! Legal and Commercial Consultant specialising in Project and Contract Management. Specialist in O&G, Environmental, Engineering and Utilities An experience individual with excellent knowledge of Freight handling / Exports Management with the objective of achieving organizational goals and making it a strong profit center, seeks an opportunity in managerial capacity. Electrician 309A Seventeen yrs mining exp all equipment. Specialty dragline up to and presently operating 4600 Manatowak. Eight yrs foreman-certified Ohio. FINAL YEAR MINING ENGINEERING STUDENT, GRADUATING JULY 2002. Predicted to graduate with a first class degree from Camborne School of Mines, UK. Proven acedemic and practical ability. Practical mining experience from employment in South African mining industry. Graduate surveying student looking for a career in mining. Process Operator I have 2 1/2 years experience working underground. I can operate a Scoop, Mucker, Jackleg Drill, and a Belt man. I also have a certification as a EMT-M and a Underground Shot Firer. New born driller ready to do some footage , or good constuction worker Experienced heavy equipment operator l recently finished my examinations as a Mine Surveyor with the Zimbabwe School of Mines.I am a student member of RICS. Bachelor of Engineering (Mechanical Engineering),PPPM (Professional in Project Planning and Management, MBA (Operation-Pu) Nineteen years of experience (Five year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV) QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business. Chartered Accountant I have completed my gradute in mining Engineering, having sound knowledge and experience in the field, have the interest to work in any place. I am a young mining graduate (with first class marks) with hands on training in different mines such as manganese and coal with workable knowledge of computers. B.tech in mining engineering. Objective To excel in the field of mining and excavation. Seeking Office Administrator/Administration Asssistant. post -10 Years experience. University Graduate Mechanical Engineer with solid technical and managerial experience in maintenance areas for mining and petroleum international companies. With proven leading skills oriented to implement, improve and maintain best practices to reduce and eliminate any source of loss related to safety and production PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology • Qualified Metallurgical & Materials Engineer with 12 years of Proven Capabilities in Research & Development, this includes, Product Development, Application Development, Process Improvement, Energy Conservation, Quality Improvement, Materials Testing, Characterization & Customer Complaint Investi This is my first year attending the Mackay School of Mines and I'm looking for a summer internship, that will give me experience that I can not recieve in school. First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   [ 33 ]   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Change search parameters... INDUSTRIES: Mining; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com