Resume - Continue acting in pipeline engineering construction and assembly independent of...

Misco Jobs

Resume #69666

CONTACT INFORMATION:
View contact information...

ACADEMICAL FORMATION

Degree: Civil Engineering (conclusion 1996) at FAAP (Fundação Armando Álvares Penteado)
Post graduation in Environmental Engineering (2002)
Civil Eng license (CREA): 5060798606/D

OBJECTIVE:

PROFESSIONAL OBJECTIVE

Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.

WORK EXPERIENCE:
PROFESSIONAL BACKGROUND

I have been active for more than 13 years in the pipeline construction and assembling. Summarized below some of the most important developments; I have worked in:

* CGA – AMAZONIAN PIPELINE JV
Post: Senior Production Engineer. From 04/2007 up to the present date

Main activities developed in the project: Coari – Manaus Pipeline Spread B2.

Responsible for the construction and assembly of the pipeline in the Amazon jungle Coari - Manaus - Ø 20" Spread B2 Caapiranga - Anamã, totalizing 661 kms of pipelines installed. Also responsible for the logistics of all activities related to the field of production including coordination of heavy watercourse transport but also the formation of teams and other activities related to the construction and assembly of a pipeline. Parallel responsible also for the construction and assembly of branches of Ø 6"and also of Stations of Bombardment of gas and City Gates to the long one of the line.

SINOPEC INTERNATIONAL PETROLEUM SERVICE OF BRAZIL LTDA.
Post: Construction and Assembly Coordinator From 07/2006 to 04/2007.

Main activities developed in the project: GASENE (Pipeline Southeast / Northeast).

Responsible for the construction and assembly of the pipeline GASCAV ( Cabiúnas-Victoria Terminal) Ø28" being a total of 300 kms of pipelines installed. Responsible also for the implementation of all activities related to the field of production including up to the formation of teams and other activities involved in the construction and assembly of a pipeline.
Implementation of welding school Inner-shield type (half-automatic weld) and too much activities related to the construction and assembly of a gas-line of great transport.

* NEDL CONSTRUÇÕES DE DUTOS DO NORDESTE LTDA.
Post: Senior Production Engineer From 04/2005 to 07/2006.
In charge of Nordeste Gas Network II (Bahia, Sergipe, Alagoas), Catú-Pilar Ø 26"
– Sub-section Carmópolis-Pilar, of 176 kms pipelines installed.
Simultaneous field coordination of two pipe distribution teams, three special constructions teams (including hydrostatic tests and tie-ins), three welding teams, three lowering-in teams, and Right-of-way opening, launching of corrosion tests, valve areas, valve assembling, compression stations (including the assembling process), as well as the follow-up of the HDD work under the São Francisco River.

* TECHINT ENGENHARIA S/A
Post: Field Engineer. From 09/1998 to11/2000

Responsible for the execution of the construction works and assembly of the Bolivia-Brazil Gas Pipeline at stretches 5, 6 and 7 as well as, at stretches 10 and 11 (sub-stretches E and F) - PETROBRÁS/SEGEN/GASBOL project, totaling 912 km of pipeline installed.
Main developed activities:
Coordination of specialized team in the execution of the drainage operation (Removal of the water inserted into the pipelines for the hydrostatic test) and the passage of the "Geometric Pig" (intelligent Vehicle for internal inspection of pipelines to verify the thickness, ovalties and dents) in a total of 546 km of extension.
Responsible for the assembly of block valves along the gas pipeline in 2 stretches and also of the right of way restoration phase (Restoration of the right of way as the pre-existent conditions in the search of the environmental quality of the job).
Responsible also for the execution dam works; soil cement drains; planting of grama grass (hydro-seedling); execution of level curves as well as fish spines, signaling of the main right of way and obtaining of anything consists.
Responsible for the civil implantation and assembly of the Stations of Compression of São Carlos, Penápolis and Rio Verde.

EDUCATION & CERTIFICATION:
LANGUAGES

Spanish: advance reading, conversation and writing.
English: advance reading, conversation and writing.
Chinese: learning

COMPUTER SCIENCES

User of most common applications & autocad

SEMINÁRIES AND EXTERNAL COURSES

* English course at New York University (May to October 2000)
* Rationalizing in the Construction of Pipelines and Offshore structures
* Specific course on Natural Gas
* Building Hydraulic Installations
* Course in the Installation and conversion of equipment to Natural Gas

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 3169)

Go to Search Parameters...

Brief Description

Diploma of Engineering and Mine Surveying. 6 Years open cut mining experience. Worked in Iron Ore, Gold, Coal, and Manganese. I have supervised and run my own survey department in the previous and current mine surveyor positions.

I am an Honors Degree (Applied Geology) graduate. My studies had helped me gain experience and overwhelming challenges in my career as a new geology graduate.Consequently, I’m self motivated and need a challenge of what I worked on during my studies, planning always to achieve a goal.

2years experience habib bank ltd as a assist cashier last one years i m working gis fields to yet i want to improve my skills plz help me and give me job

As Quarry and Blasting Engineer In FCCL(fauji cement co. ltd)Pakistan

15 years experience in mining and oil fields industry. I am working for 8 years (1997 - present) as reservoir geologist for resources and reserves evaluations studies for oil and gas fields and for geotechnical studies .I worked as mining coal geologist (1995 - 1997) and as geol

A Senior Electric and instrument Engineer with a wide range of experience in the copper smelter & refinery. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

Masters in Machine Design , 7+ yrs exp, (ProE WF+ CATIA V5)*Harness Design, Sheetmetal Design

Warehouse laborers

Trucks: Ford, Scania, Mercedes Benz, MAN, International and Iveco. CAT: Maintenance and repairs to, Wheel Loaders, Track Type Tractors, Graders, O/H Trucks, ADT’s, CAT Underground Machines, Engines and Drive Train. Various underground machines.

Driver

Bilingual Administrative Assistant, Bilingual Receptionist, Interpreter

Currently employed at Freeport Indonesia as a Development Miner. I especially skilled on tamrock Development Jumbos and i am willling and cooperative worker. I am also worked in Saudi Arabia in a similar capacity.

8 years of underground Mining

I had my M.Tech from IT-BHU, Varanasi, India in Mine Planning. My M.Tech Project work on "Reliability Analysis of Longwall System by Fault Tree Method" and B.Tech project on "Predicting The Production Of Opencast Mine (Simulation Approach).

Seeking an international position on an oil platform, drilling company, shipping industry, mining industry or any similar heavy duty industry as Mechanical Fitter and Turner where my experience, training and good working habits will be an asset to your company.

Eight years in the mining industry enables me to bring a vast knowledge base to any employer. Experience with the semiconductor and construction industry provides new perspective into process improvements and quality. I use AutoCAD and interpret blueprints. Willing to relocate.

To obtain employment in the mining industry. Thank you for your time and consideration.

Entry level Mining Engineer. - +7 years work experience in mining industry. - project management, project supervision, employee management, safety policy implementation, and quality control - strong work ethic, professional and conscientious - written and oral communication skills

I’m currently a senior in Mining Engineering at South Dakota School of Mines and Technology and I am looking for a full time entry level position in my chosen field starting in January 2002.

31 year old male geologist with 8 years experience in diamond and gemstone mining industry in Africa. hold a BSc (Hons) from Imperial college London. Willing to relocate and work anywhere.

A detailed summary of my skills and experiences within all the aspects of production drilling and blasting, both in open cut and underground mining. I have specialized in this field for the last fourteen years and my resume details my competence and confidence within the mining industry.

5+ years Hardrock Underground Mining Experience, 4yr Engineering degree complete in Dec. 2006, Seeking International Work

Trade Qualification in Heavy Plant Mechanic. Knowledge of CAT and Komatsu machoines.

B.Tech (information technology)

Mining Superintendent

Electrcian with 3 years experince in power generation

Ky & Tenn certified Underground Mine foreman with 16 1/2 yrs experience

I'm a geologist, worked like geologist in mining compagny and Oil &Gas compagny. I have also one experience like manager.

MBA, 100% Spanish and English.

Executive management, business development, supply chain, IT, embeded system

I am currently working as an Operations Research Officer in De Beers. I am based in its headquarters, in Johannesburg. My key responsibility is to compose optimal plans for management for mining our resources subjected to various constraints and objective functions.

Seeks a challenging management position in a Metallurgical process control, Evaluation or Re-engineering environment and related jobs, which suit my resume.

Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.

> BE(Mining) /85%/2006 with proficient in SAP, C, C++,SQL and OFFICE tools

fast learner and holder of bachelors degree in mining engineering

An astute professional with 2 years of experience in Smelting, Project Management & Marketing.

Microsoft enterprises systems, Great Plain ERP, SharePoint services SQL Server 7\2K\2k5, Exchange Server 2k\2k4, ISA Server 2k\2k4, IIS 6.0, Manufacturing (Planning ERP, Execution MES, SCADA, Process Controlling) Active Directory, DNS, Windows Servers, Desktop, POS, PDA NT\2K\2k3\XP\Vista VBA\Access

Mine Manager / Project Manager / Technical Services / Consulting

GIS-Geophysicist/Databse Administrator

D9 Bulldozers, D6 Bulldozers, 140 Grader, Straight 6, Lister 1 Cylinder, Lister 2 Cylinder, Deutz engines, B30L and B25L Bell Dump Trucks, Telehandler (Perkins), Scania Trucks – overhauling engines, diffs, gearboxes, Volvo Trucks – repairs, fault finding, overhauling engines, diffs, gearboxes,

I have a certificate in Automotive Service Technician NC-III (24 Months) , Technical Education and Skills Development Authority, Region IX, Zamboanga Peninsula. I perform component repair and troubleshooting of engine, transmission, differential, brakes and hydraulic system.

Engineer heavy equipment diesel mechanic. 5 years experience

9 Years experience in Laboratories and Fire Assay

Geotec Assistant

Young Energetic Engineer, capable of achieving objectives, with excellent analytical and communication skills, skilled in troubleshooting, analysing faults, servicing & repairs of caterpillar machines & engines, also handled information entry & report generation, opening & closing of transactions

Multi skilled Automotive Mechanic, 24yrs experience with the military often in extreme conditions, work well in a team or individual, some management experience but mainly hands on, good problem solving skills, currently working in Saudi Arabia, contract exp 17th June, i have a migrant visa already

24 years of Machinist experience, with knowledge in heavy and preventative maintenance, experience in the Industrial Mechanic/Millwright trade Supervision of production and quality control mechanical aptitude WHMIS and OHS training

MCSA & CCNA Certify (System Administrator)

Bachelor degree in geology, Hard working Safe individual, Excelent skills in Mineral Identification and Structural Geology

Seeking a challenging career, where my analytical, managerial, practical skills will be contributed to the esteemed organization and helps to improve my skills with dedication, determination and my commitment to the work.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out