Resume - Fitter / Rig Mechanic. Overseas experience FIFO, All standard and preventative m...

Misco Jobs

Resume #7070

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Please enter brief description of your skills and qualifications.
------------

RESUME

DATE OF BIRTH: 12th August,1956

MARITAL STATUS: Married with two children

EMPLOYMENT HISTORY:

28 / 9 / 00 TO PRESENT FITTER / RIG MECHANIC

OD&E Aust.(Well Services)

DUTIES: Overseas experience in East Africa -Mozambique and various remote locations in Australia on OD&E Double, Tripple and Work Rigs (Ideco H-725,Cardwell KB 700,Kremco K-600,Ideco 1200ED-SCR,National 610E-SCR,Franks Cabot 300) encompasing all standard and preventative mechanical maintenance on all Oil and Gas drilling rig systems incl.hydraulics,pnuematics,water,drive/hoist,diesel engines and power.

Fly in / out rosters

12 / 7 / 99 TO 30 / 7 / 00 SERVICE MANAGER.

Southside Agencies - Lismore

DUTIES: Manager to Service Department of new and used truck dealership(Freightliner,UD,Sterling,Mercedes)

supervising and co-ordinating workshop and staff

(service advisor,clerk,4 x Truck technicians and

4 X apprentices).Costing,Customer relations and breakdown coordination

5 / 5 / 97 TO 12 / 7/ 99 FITTER / RIG MECHANIC

OD&E Aust.(Drilling)

DUTIES: Responsibility and repair of all aspects of land based drilling rigs encompasing SCR and Compound double and triple stand units.All maintenance of diesel stationary engines and gen sets, pumps-centrifugal and positive displacement,reciprocating and rotary compressors,oil well BOP's and pressure systems fluidand air,maintainance on Cat 3408, 3406,D379, Lister,Detroit and other various engines truck,forklift,loader and 4WD total maintainance. Fly in/out Mobile camp accomodation.

13 / 3 / 90 TO 5 / 5 / 97: HEAVY EQUIPMENT FITTER

BHP Coal Pty Ltd.

DUTIES: All facets of repair and field service including engines power trains,hydraulics and pnuematics etc. on the following equipment Euclid 120,130,150 ton belly and rear dump trucks-O&K RH 120 shovels and excavators- CAT 992c,988 and 910 loaders-375 & 475 Komatsu dozers-D9H,D9L,D9N,D10N,D10 CAT dozers-631 CAT scrapers-Drilltech Drills-Various other makes of mobile cranes, water pump units,lighting plants medium trucks and 4 wheel drives.

4 / 11 / 86 TO 2 / 3 / 90: HEAVY EQUIPMENT FITTER

Comalco,Weipa.

DUTIES: All facets of repair and field service on the following equipment-R85 and 150 ton Euclid haul trucks-CAT 777 rear dump & 776 belly dump trucks-CAT 992 loaders-RH 75 O&K face shovels-CAT 824B,D9H,D9L,D7

dozers- 14 &16G and O&K G350 graders-657B,657E and 633 CAT scrapers.Periods of supervisory status as acting foreman.

29 / 3 / 84 TO 17 / 10 / 86 HYDRAULIC FITTER

Ifield Engineering & Ipswich Hydraulic Engineering

(Business changed ownership)

DUTIES: Complete overhaul of all ranges and makes of hydraulic components ie rams,pumps,valve banks,motors and hydrostatic drive assemblies.Field service and dynamic testing.

1 / 5 / 83 TO 20 / 3 / 84: FARM MECHANIC / STATIONHAND

Clark and Tait Pastoral

DUTIES: Repair and maintenance of all farm machinery ie tractors, implements,pumps,trucks and chainsaws.Cultivation,stock work,property maintenance and improvements.

18 / 1 / 82 TO 24 / 4 / 83: DIESEL FITTER / MECHANIC

GT Sales and Service -Loamside

DUTIES: Engine overhaul and repairs to Cummins,MAN,Caterpillar

Perkins.Mechanical repairs to trucks and trailers ranging from routine maintenance to complete overhaul and stripping, chassis straightening and re-assembly.Earthmoving equipment repairs to loaders,scrapers,dozers and bobcats.Welding and fabrication using electric arc,mig and gas including aluminium.

2 / 10 / 78 TO 15 / 1 / 82: DIESEL MECHANIC

Cummins Diesel Sales and Service-Darra,Brisbane

DUTIES: All facets of repair on all ranges Cummins engines.

sub assembly rebuilding,injector and fuel pump overhaul, engine re-building in and out of chassis,truck servicing, dyno-testing and field service.

Warranty claims clerk and leading hand supervisor in rebuild section.

1 / 7 / 77 TO 21 / 9 / 78: ENGINE REBUILDER / FITTER & TURNER

Haliday Engineering,Lismore

DUTIES: Engine reconditioning and assembly including cylinder head overhaul,syncro-seating,re-boring,surface grinding,crack testing and machining.Reclamation and assembly of brake componentry.

26 / 1 / 72 TO 22 / 6 / 77: ENGINE REBUILDER / FITTER & TURNER

Mendham Engineering.Rocklea.Brisbane.

DUTIES: Apprenticed here from 26/1/72 to 26/1/76 and served as tradesman thereafter performing duties revolving around reconditioning most makes of petrol and diesel engines.

Including such work as cylinder head recon,syncro seating inserting,valve grinding,surface grinding,conrod resizing balancing,crankshaft grinding,verticle and horizontal boring liner recessing,magnetic crack testing,metal stitching, turning and engine assembly.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 3494)

Go to Search Parameters...

Brief Description

I am looking for permanent employment at a company where I can use my training and experience to perform my job function. I would like to work for a company where advancement in to management or some other professional aspect of the company is a possibility

Seeking challenging rewarding career opportunity with a progressive innovative company utilizing leadership and management skills

I am a recent graduate from the Haileybury School of Mines in the Mining Engineering Technician Program. I graduated with honours in August 2001

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Project Management, Supply Chain Management, Human Resources Management

Looking for Instrumentation and controls job

Consultant, Control Risks; Formerly Country Manager, Nigeria, The Olive Group, Chief of Security, diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

Structural Steel Detailer, Tekla v15, Pro Steel v17 Auctocad 2008

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Fitter / Rig Mechanic. Overseas experience FIFO, All standard and preventative mechanical maintenance on all oil & gas rig systems, Please view attach resume. Thank you Regards Neil Hopper

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Electrical Engineer and Computer Sciencer

Marine Operations, Shipping, Logistics, Port Management, Ship Agency, Representation in Ukraine at port of Berdyansk

Dear Sir, Attached please find my resume for the post of Cad Designer. I am a Mechanical Engineer and working with a leading Manufacturing company as a Cad Designer / Engineer.

SEEKING CHALENGING CARRER OPPURTUNITY IN MINING FEILD MINING EQUIPMENT,DRILLING WORKS WORK IN ANY PART OF WORLD 1ST CLASS DEGREE HOLDER DELT WITH SPONTANEOUS HEATING IN MINES

8 years of professional experience in Administration and personal assistance.

I am a qualified Metallurgy and Materials Engineer with international research and training experience. I am a person with strong organizational skills and am very confident in analyzing and solving problems with positive outcomes. My past studies in Metallurgy and Materials Technology and the resea

I am a qualified and experienced Medic or Paramedic and have vast HSE/Safety/OHS/QHSE experience and qualifications. I am also a qualified rescue technician and am very well versed in emergency co-ordinating.

Proficient in reading mechanical drawings and designing using Auto Cad, CATIA, NX-IDEAS.Strong Technical writing and presentation skills along with good hold in MS - Office.Master of Engineering (G.P.A - 10.33 out of 13)(2008- 2009)University of Windsor.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

Civil/Structural/ Architectural Designer with extensive knowledge of petrochemical and oil and gas industry. Expertise in 3d Bentley Structural and knowledgeable in Staad Pro

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Geophysicist

Mechanical Engineer, technical support

Young haul truck driver eager to get back to work, trained on both articulated & rigied frame haul trucks.

Oil & Gas Exploration Project Manager - Spring Creek, Nevada resident - Forest Service, BLM , Tribal, State & Federal liason experience

Sales, Engineering Project Manager

I am Indian national working in Saudi Arabia as secretay, i have nearly around 4 years of experience in secretary,

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

I have 3 years experience in the Design industry. I self taught myself on AutoCad and Microstation.

Ellipse Business Analysis Skills in the Area of Asset Management, Work Management, Purchasing, Warehouse, Catalogue, and others.

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Seeking Assignments with organisation of high repute in Mining industry. To be an effective member of a group of repute where I can share more knowledge and get an opportunity to develop myself.

25 years experience in Oil Field, Africa, Middle-East, and Asia

A Metallurgical Engineer with over 2 years of experience in Process management, Smelter Operations, Production planning, Quality Assurance. At present, associated with Sterlite Industries India Ltd, serving as Process Engineer- Primary Smelter with ISA smelt Technology. Expertise in handling the com

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Electrical Engineer with wireless, optical and integration expertise

Electrical Engineer with previous hands-on experience in electrical and mechanical equipment maintenance

Academic Background:M.Sc.Tech. (1987), Applied Geology, Indian School of Mines, Dhanbad, India. Expertise: Engineering Geology and Rock Mechanics in the field of rock engineering

Purchaing, Procurment, Supply Chain Management, Materails, Inventory

I have worked as a chef in extreme conditions in the past. nothing i can't handle big or small jobs.

Mechanical/Manufacturing Engineering, Project/Program Management, Supply Chain Management

Load overburden, split coal, push in a shop

A grade electrical licence. Underground communications. Tamrock drill equipment service and fault finding, Flygt pump repairs and maintenance. Ability to read and draw schematics/wiring diagrams. HV switching. Primary/secondary ventilation. Commercial electrical installations. Duty desination.

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

Hard worker pursuing a career in the mining industry. Experienced in heavy equipment repair. Mechanical aptitude and willing to learn.

I am a mine engineer.

Technical/General English Instructor. Certified. BA and MA. Employed in field since 1988. Overseas experience in Middle East and Far East including oil and gas industry.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out