Resume - I am a 2007-08 Mining Engineering graduate of the University of Kentucky's progr...

Misco Jobs

Resume #71339

CONTACT INFORMATION:
View contact information...

Objective

To provide my Employer with the benefit of my professional training, skills and experience.

Employment

Job Title Senior Project Manager/Principal dates: May, 1988 - 2003
Southern Cross Engineering
680 East Main Street
Bartow, Florida 33830

Commercial, Industrial and Residential Development-Inception to Construction.
Included are my particular areas of emphasis:

Access Management - State and Local Transportation Networks

Comprehensive Utility Installation - State and Local Transportation
Networks (ROW)

Potable Water Supply and Distribution (including Fire Protection Analyses)
Design, Permitting and Construction

Wastewater Collection, Treatment and Disposal (aerobic and anaerobic systems) Design,

Permitting and Construction Management

Environmental Resource Protection I (Surface Water Collection, Treatment and Attenuation/Management) Design, Permitting and Construction
Management

Environmental Resource Protection II - Wildlife Habitats and
Environmentally Sensitive Lands (primarily Wetland Delineation, Mitigation and Restoration with occasional Riparian Issues)

Flood Plain Encroachment (LOMAS, LOMRS and BFE establishment) Permitting

Minor Traffic Studies and Vehicular Use Plans

Zoning changes and Future Land Use Map Amendments

Variances to Federal, State and Local Land Development Regulations

Water and Sewer Tariffs for the Public Service Commission

Acquisition of State Grants for Construction of Water Supply Systems in
Areas of Aquifer Contamination (FDEP Water Resource Grants)

This position afforded many educational opportunities. I may have omitted some areas. Please ask. I am delighted to answer your questions.

Job Title: Junior Project Manager dates: January, 1987- May 1988
Pickett and Associates
375 First Avenue South
Bartow, Florida 33830

Complete Management of Small Projects (</=10 Acres). Preparation of Engineering
Construction Plans and Construction Estimates for Submittal to state and local agencies,
Review of Contractor Bids and Shop Drawings. Multi-discipline coordination for design projects including residential and industrial sites.

Job Title: ET-I dates: January 1985 - January 1987
Kentucky Department of Transportation
Frankfort, Kentucky

Preparation of Visual Exhibits for presentation to the Federal Highway Administration to procure Federal Participation on State Highway Bridge Projects

Education

Degree Earned or Major: Mining Engineering/Civil Minor 1978 -1983
University of Kentucky 2006-2007
Lexington, Kentucky

Skills

Software Proficiencies*:

AutoCAD
Land Development Desktop
Carlson Mining
Microstation
Stability and Subsidence Prediction Modeling
Roof Bolt Design
Mine Pillar Design
Ventilation Network Design adICPR (Advanced Interconnected Pond Routing)
TR-55 (Hydrology Program - Standard Nationwide)
KYPIPE (Software for Pressurized Water Systems)
MODRET (Based on USGS Modflow for groundwater movement)
Corel Office Modules
Microsoft Office Modules
Adobe Acrobat
Adobe Distiller
Adobe Illustrator
Adobe Photoshop
Multiple Digital Imaging Software

*I am proficient in the use of Microsoft's DOS and Windows platforms and most software designed for them.

Workshop Training

PSI's Modret/Modflow Workshop (sponsored by the SWFWMD)

USDA's Soil Series Identification and Groundwater Fluctuation/Movement
Workshop in various Florida counties

ORVSS (Ohio River Valley Soil Seminars )

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 3126)

Go to Search Parameters...

Brief Description

I am a B. Eng. (2002) graduate from McGill University in Mining Engineering. I have accumulated 25 months of work experience in mining related fields. I am a permanent resident of Canada. I am willing to relocate and work onshore or offshore.

I have recently graduated from Carleton University with a Bachelor of Engineering - Mechanical. My fourth year project involved the design of an Autonomous Underground Mining Vehicle in which I designed and implemented a PEM fuel cell and ultra capacitor hybrid propulsion system.

Bsc (hons) Degree in Electrical Engineering form the University of Zimbabwe Graduate trainee Engineer for one year eight months with Gaths Mine.

Recently completed 40 hr underground mining class, and obtained certification. I am a hard worker with high regards for safety. I have experience working with and maintaining varios types of machinery,

Young engineer with international production experience in engineering and operations, advanced university geotechnical studies, bilingual, dual citizen, seeking a position in geotechnical engineering and ground control.

Ghanaian working with African Mining Services base in Ghana as Heavy Duty Equipments and Crusher Maint. Planner

Sales Planning & Execution, Sales Budgeting & forecasting, Senior level Negotiation, New Product introduction, Team building & Organizational leadership

4 years on surface and undergrond equipment no incidents or accidents

Bachelor of engineering in mechanical engineering and have more than 18 year experience in mechanical maintenance & projects, condition mointoring in cement plant and steel plant

Key Skill: Hydraulics - Electrical control system - Mechanical

5 Years with sandvik mining & construction s.a.2 Years at sandvik field services.Have been promoted as senior technician 10 months ago.qualified in the south african air force as a aircraft mechanic on the puma helicopter.i specialise in ejc 115-axera lp drill rigs.this is my passion.

I’m looking for a new project.

* I am a qualified Chartered Accountant (UK) a holder of Association of Chartered Certified Accountants (ACCA-UNITED KINGDOM), Association of Accounting Technicians (AAT-UNITED KINGDOM).CURRICULUM VITAE

I have worked mainly on structural geology, exploration geology (boreholes) and applied geology. From February 2007 I’m working as Employer’s Representative Head Geologist in Ethiopia (Gilgel Gibe III Hydro Electric Power Project, EPC Contract). Since 2002 I’ve worked in Italy, France and Austria.

Electrical/ Information and Networks Engineerin - Quality & IT Management

Caterpillar diesel mechanic.

I have been mining for about 8 years now With Eroc I was on the Development Bogger Before that Barminco at Plutonic WA as a Production Driller I was even thinking of maybe working overseas if the chance comes up

US GAAP reporting manager for one of the largest oil and gas companies in Russia; 8 years experience in Pricewaterhouse Energy and Mining audit practice ACCA qualified from 1999 Have solid experience in US GAAP, IFRS, Russian statutory financial reporting, good knowledge of Russian tax

Worked in the mining industry for 8 years (I love my work). I am a very keen hard worker. I am currently looking for a job that pays very well so i can set myself up financially.

Mechanical Design Engineer

Mining Engineer with more than five years postgraduate experience, mine planning, drilling and blasting, loading and haulage, production scheduling, equipment selection, mine modelling with SURPAC.

I am full time cartographer

I have more than 10 years of experience in logistics and 5 years in coal mining.

Power Electrical Engineer (Power Transformer Designer)

Competent with use of ECLIPSE simulation package; Proficient with use of LESA to analyze well logs; Ability to use VIRTUWELL (Fekete) to analyze multiwell performance; Able to use ChemCAD to simulate oil field processes; Interpretat

Free! Legal and Commercial Consultant specialising in Project and Contract Management. Specialist in O&G, Environmental, Engineering and Utilities

An experience individual with excellent knowledge of Freight handling / Exports Management with the objective of achieving organizational goals and making it a strong profit center, seeks an opportunity in managerial capacity.

Electrician 309A

Seventeen yrs mining exp all equipment. Specialty dragline up to and presently operating 4600 Manatowak. Eight yrs foreman-certified Ohio.

FINAL YEAR MINING ENGINEERING STUDENT, GRADUATING JULY 2002. Predicted to graduate with a first class degree from Camborne School of Mines, UK. Proven acedemic and practical ability. Practical mining experience from employment in South African mining industry.

Graduate surveying student looking for a career in mining.

Process Operator

I have 2 1/2 years experience working underground. I can operate a Scoop, Mucker, Jackleg Drill, and a Belt man. I also have a certification as a EMT-M and a Underground Shot Firer.

New born driller ready to do some footage , or good constuction worker

Experienced heavy equipment operator

l recently finished my examinations as a Mine Surveyor with the Zimbabwe School of Mines.I am a student member of RICS.

Bachelor of Engineering (Mechanical Engineering),PPPM (Professional in Project Planning and Management, MBA (Operation-Pu)

Nineteen years of experience (Five year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

Chartered Accountant

I have completed my gradute in mining Engineering, having sound knowledge and experience in the field, have the interest to work in any place.

I am a young mining graduate (with first class marks) with hands on training in different mines such as manganese and coal with workable knowledge of computers.

B.tech in mining engineering. Objective To excel in the field of mining and excavation.

Seeking Office Administrator/Administration Asssistant. post -10 Years experience. University Graduate

Mechanical Engineer with solid technical and managerial experience in maintenance areas for mining and petroleum international companies. With proven leading skills oriented to implement, improve and maintain best practices to reduce and eliminate any source of loss related to safety and production

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

• Qualified Metallurgical & Materials Engineer with 12 years of Proven Capabilities in Research & Development, this includes, Product Development, Application Development, Process Improvement, Energy Conservation, Quality Improvement, Materials Testing, Characterization & Customer Complaint Investi

This is my first year attending the Mackay School of Mines and I'm looking for a summer internship, that will give me experience that I can not recieve in school.

Operations, Technical, Contract, Leadership, Surface, Underground, & International Experience

I am a 2007-08 Mining Engineering graduate of the University of Kentucky's program with nearly twenty years of work experience in various capacities of Land Development including Project Management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out