Resume - Prepare shift report to Shift Supervisor for the working activities based on dat...

Misco Jobs

Resume #72288

CONTACT INFORMATION:
View contact information...

Place/Date of Birth: Rembang,16 Juni 1982
Nationality: Indonesian
Religion: Moslem
Marital Status: Single
Height / Weight: 170 cm / 55 kg

FORMAL EDUCATION

2005 ¡V 2008: Institute Teknologi Pembangunan Surabaya
1998 ¡V 2001: SMUN. 1 Cepu
1995 ¡V 1998: SMPN. 3 Cepu
1989 ¡V 1995: SDN. Tambak Romo I, Cepu

COURSES ATTENDED

March 12-17, 2007: the Class one of Operator Boiler by Depnaker
July 10-12, 2005: Reverse Osmosis plant by Metito
August 2003: Plant And Panel Operator Petrochemical / Oil and Gas by
Pusdiklat Migas Cepu

WORK EXPERIENCES

1. PT. Trans Pacific Petrochemical Indotama (TPPI) Multinational Company
Refinery and Aromatic Plant UOP Technology

Line of Business: Refinery and Aromatic.
Product & Capacity: - P-Xylene
- Xylene
- Benzene
- Toluene
- Light Naphtha
- Kerosene
- Gas Oil
- Mix Xylene
- Heavy Aromatic
- Reformate
- Residue
Position: Operator Utility.
Working Period: 3 years (Maret 2005 to Present)

Responsibilities area:

1) 2004 ¡V 2005, At the Project Supervising the contractor's working
„X To prepare of standard Operating Procedure (SOP) for PreCommissioning, Commissioning, and Start up of off Site Utility.
„X Checking of piping installation and Instrumentation as per P&ID and Isometric (Punch out of lines).
„X Inspection of Columns Internal, SWRO (Sea Water Reverse Osmosis), Deaerator, Boiler, HRSG, Combustion Turbine Generator, Sour Water Stripper, Cold Box, Tanks before Boxing up.
„X To recheck all of contractor's work in according to the project schedule and design (Erection, Piping & Equipment Acceptance).
„X To recheck process engineering flow diagram, piping & Instrument Diagram, Vessel Entry, Work permit and Chemical Store.
„X To advise management on new policies for engineering inspection and techniques for condition monitoring, reliability and life expectancy of Off Site Utility plant equipment.
„X To follow system established policies and professional engineering standard.

2) 2006, On Start Up, Involved activities of Pre Commissioning and Commissioning, such as: Flushing of lines, Steam Blowing, Cooling water line flushing, Hydro Test of equipment along with connected piping, Water Run test of pump, Safety Valve Popping Test, Vessel Internal Inspection, Cold & Hot Acid Trial, Interlock Test of DCS, Heating Up, Making of SOP System and Trial Production.

3) 2006 ¡V at present, On Commercial Production
„X To manage the dedicated area of responsibility of OSU facility person in shift basis in accordance to the agreed planning prepared by OSU Shift Supervisor.
„X To organize my team to meet the OSU objectives within my area of responsibilities.
„X To develop my team member capabilities to meet the operation team member to be capable in operating the facility, also as first line SHE/Emergency Response Team, facility inspector and quality control.
„X To conduct trouble shooting in case problem occurs or recommendation for problem solving including process/operation improvement.
„X To prepare and update the operating philosophy, procedure, instruction together with operation Plant Engineer for the OSU Facility.
„X To maintain and ensure the reliability of the OSU Facility.
„X To set up the productivity to meet the (Aromatic, Tank & Marine and Infrastructure) customer's demand.
„X To administer any problems/incident/accident, identify and provide trouble shooting and/or problem solving guide to the Operation Shift Personnel or assist the Technical Department.
„X To check and verify that the works, schedule and procedures area implemented in proper manner.
„X To prepare shift report to Shift Supervisor for the working activities based on data received from subordinates.

4) Utility Plant o Power Generation.
„X Combustion Turbine Generator, 3 X 21 MW, Type MS 5001, manufactured by Nuovo Pignone, Italy
„X Emergency diesel generator, manufactured by PT. Trakindo with capacity 3 X 1.5 MW
„X Fuel Oil and Fuel Gas System. Fuel Gas Booster Compressor, manufactured by MAN Turbo with capacity 2 X 9 T/h o Steam Generation.
„X Aux Boiler (1 X 90 T/h), Heat Recovery Steam Generation/HRSG (3 X 75 T/h) manufactured by PT. DKME.
„X Boiler feed water pump with capacity 3 X 250 T/hr, 2 turbine driven and 1 motor driven
„X Steam condensate system
„X Deaerator and accumulator drum with capacity 585 T/hr
„X Steam letdown station (HP-MP-LP) with pressure 43 Kg/Cm2, 17 Kg/cm2 and 3.5 Kg/cm2
o Water Treatment Plant with capacity 4 X 50 M3/h, (Demineralized, Polisher and Neutralization Package Manufactured by PT. Metito)
o Treated Cooling Water Closed loop system (4 X 6000 M3/h) 2 turbine driven, 2 motor driven and 12 units of Plate & Frame Heat Exchanger (PFHE)
o Sea Water intake (4 X 7000 m3/hr), type submerged pump) 3 motors Driven, 1 turbine driven o Electro Chlorination Unit / Sodium Hypo chlorite Generator o Waste Water Treatment Plant, manufactured by PT. Kormac Pratama o Sour Water Stripper, manufactured by PT. Sanggar Sarana Baja.
o Incinerator package, manufactured by PT. Kormac Pratama o Instrument Air / Plant Air, 4 X 5000 Nm3/h, manufactured by FS Elliot Company.
o Flare (Main flare with capacity 1800.000 kg/hr and Utility Flare with capacity 785.000 kg/hr) manufactured by John Zink o Nitrogen Plant with capacity 3000 Nm3/h, high purity 99.90% gaseous nitrogen (GAN), O2 content 5 ppm and 200 Nm3/h liquid nitrogen (LIN), Manufactured by United Air Product

3. Unit Pengolahan Minyak dan Gas Pusdiklat Migas Cepu Multinational Company

Line of Business: Oil and Gas
- Product & Capacity:
- Pertasol
- Kerosin
- Gasoil
- Residu
- wax
- Fiber
Position: Proses Operator. Report to Shift Supervisor.
Working Period: 1 years (October 2004-2005)

Responsibilities area:
1) To in charge and responsible for the smooth and safe operation of Proses and ensure understanding of problem & solution to Unit Process
2) To direct and coordinate the activities of the plant with objectives of achieving production targets and assuring safety of plant machinery and personal.
3) To handle of various unit operations, such as, Boiler, Air Compressor, Separator, Heater/Furnace, Evaporator, Cooler, Fractination Coloum, Heat Exchangers, Pumps, Tanks,, and Field Operation & Troubleshooting.
4) To make production daily report and write analytical method & technical report and always concern safety work.
5) To make weekly report and monthly report of Unit Process
6) To study plant operation, emergency manual and procedure shut down/start up.
7) To continue monitoring quality product & reliability equipment from Unit Process.
8) To implement plant modification work in accordance with established procedures and approval plan.
9) To originate system/plant modification to improve safety, reliability, efficiency and productivity.

10) Unit Process
1.Feed exploration from Ledok, Kawengan, Nglobo, Wonocolo,kinds of crude oil: paraffin and naphtain.
2.Capasity Unit Process 300 M3

3.Product: Gas, Pertasol, Kerosin, Gasoil, Wax, and Residu.

Additional o English pasif.
o To understand of HAZOP (Hazard Operability).
o To understand of JSA (Job Safety Analysis).
o Have Basic Petrochemical Training for Mental & Discipline at Komando Latihan Marinir Surabaya Indonesia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 3127)

Go to Search Parameters...

Brief Description

Graduate in chemical engineering having 11 years of expereince in Projects and Production.In depth knowledge in Sulphuric and Phosphoric acid technology for production and implementation of projects.Having overseas experience for handling project activities.

Certificate III in Business Administration, Reception Plus one day seminar, 1 year 3 months experience in reception / administration in civil engineering firm.

Electricain

Hard working and willing to work long hours and weekends, Iunsupervised or in a team, Construction Green Card & first Aid, HR Licence in progress.

25 years experience in Oil Field, Africa, Middle-East, and Asia

Deep knowledge of refinery process, engineering development and construction expertise. I have experience as Plant and Project engineer in the direct coordination of the execution of the work during start-up, commissioning and operation stage, control of contracts, administration and engineering.

My job is too repair stoppers drills jacklegs drills sandpippers pumps, double diaphragm pumps, & others any small compressed air machine I can fix screen pushers, airlegs .

Underground hard rock mining

Electrical Engineer with wireless, optical and integration expertise

Electrical Engineer with previous hands-on experience in electrical and mechanical equipment maintenance

Academic Background:M.Sc.Tech. (1987), Applied Geology, Indian School of Mines, Dhanbad, India. Expertise: Engineering Geology and Rock Mechanics in the field of rock engineering

Professional Engioeer

Experienced mechanical, civil engineer and land surveyor. Emplayed in mining, railroads, building, construction and other projects. Supervisor of other engineers and contractors. Plant engineer including hazardous waste. air quality and environmental health (OSHA).

Load overburden, split coal, push in a shop

Hard worker pursuing a career in the mining industry. Experienced in heavy equipment repair. Mechanical aptitude and willing to learn.

I am a mine engineer.

Technical/General English Instructor. Certified. BA and MA. Employed in field since 1988. Overseas experience in Middle East and Far East including oil and gas industry.

Mechanical Engineer with 7 years of hands on experience, A Qualified Lead auditor for ISO 9001:2000, ISO 14001:2004 & OHSAS 18001:1999

Transportation professional seeks new challenge. Will consider entry level or other qualified offers.

I am Masters Degree holder in Mineral Process and Diploma (PG) in Energy & Environmental Management

Working as Procurement head to handle all the Project items needed for constructions and Mining. Good in MSoffice/Computer/ERP/SAP/ORACLE.

I am a recently graduated mechanical engineer from the University of Melbourne. I have a strong interest in design, mining and also computational fluids dynamics. I am able to multitask, and highly motivated, thus enabling me to work autonomously as well as in a team.

Great Technical and problem solving skills

Italian Geology with litte experience in petrography applied to cultural goods and industrial processes

Trade qualifed Vehicle mechanic, experience as a Heavy Diesel fitter/Hydraulics/Mining Equipment etc.

Prevent / correct unsafe acts & condition.

I have completed my M.Tech. in applied geology from the Indian Institute of Technology Roorkee presently working as a Manager Geologist in DGDC Ltd.,I am looking for a job of Geologis ,

Project and maintenance work experience in power generation, transmission and distribution , steam raising plant,,,large power transformers, AC motors, DC motors and drives ,power factor control equipment, energy management systems, (PLC) & SCADA , Instrumentation and Control Engineering

Enthusiastic & experienced Materials/ Purchasing/ Project Manager

38 years old, Civil Chemical Engineer 4 years of experience in operational activities in Chemical Mining Industry, including leaching process management, SX and special chemical process.

A Mechanical Engineering graduate from NIT/KREC SURATKAL INDIA with over 19 years of experience in mining sector with over 7 years as Head of Maintenance operation in underground as well as open pit mine.Presently working as SBU head with responsibilities including planning,procurement,budget prep.

An enthusiastic professional with proven ability in software development, from inception to sign off. Excellent software development and technical skills, with experience in PHP, MySql, Access, ASP, ASP.NET, VB6, VB.NET, Microsoft SQL Server, Seagate Crystal Reports and other development tools.

Graduate Engineer looking for work in mining or mineral processing industries.

I have a lot of experience in many different industries. I am a fast learner and a hard worker. I have good organizational and management skills. My employers and fellow employees consider me a pleasure to be around and easy work with.

Prepare shift report to Shift Supervisor for the working activities based on data received from subordinates.

Nace certified coating inspector

Electrician with over 20 years experience

Plant Operator

International Safety Professional with experience in the mining and construction sector as an EPCM and owners representative on multi-billion dollar projects.

Presently I am working with a Multinational FMCG Company (Dairy Division)

Experienced operating Komatsu 830E and 630 dump trucks. Also CAT 777D dump trucks and water carts. Experienced blast crew. Many licences and quals. Experienced trainer and assessor

Manager / Engineer ( HW/SW/QA/Training )

Certified Underground ventilation officer, 3 Years expierience Anglo Platinum, Occupational Hygiene Certificate.

I am having my bachelor degree in Civil Engineering and Masters in Geotechnical Engineering from top rated technical institutions of India. Also I have 3 years of working experience in EPC environment. I worked as Design Engineer (Geotechnical) in Larsen & Toubro Ltd., (www.lntecc.com).

Metallurgist and MBA with expertise in reducing costs associated with wear, maintenance and repair. Skilled at business analytics and internet savvy.

Marine + International Projects Oil & Gas

-1 yr: Business Consult. in Comm. Futures Trading for analysis commodity markets -1 yr & 2 mths: implement, maintain database & filing system -2 yrs: Expl. Geologist working in the field at remote locations, produce maps,maintain database; Sound knowledge of safety policies

Seeking employment in mining Industry/Consultency as Mine Planning /Scheduling Engineer. Key Skills: Exposure to mechanised Underground and Opencast mining technologies. Experience in Computerised Mine Planning and Geological modelling using Minex software and Autodesk

I am a Technical Design Engineering of 23 years, I work in a manufacturing company of my country. I am interesed in 3D cad modeling, drafting and simulation/animation product base on CAD/CAM/CAE system (AutoCAD, MecDesk, Solidworks, Catia, Unigraphic, Pro/E, Mastercam, Mold flow, Xsteel, etc)

Managing, organising and participating in geological field studies, drilling and geological testing programAnalysing geological, geochemical and geophysical survey data, well logs and other test results, maps, notes and cross sections, core samples, drill cuttings and rock samples

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out