Resume - i am the man for your work ,i have run all different kinds of boring mills

Misco Jobs

Resume #77146

CONTACT INFORMATION:
View contact information...

I am writing to you at the suggestion of CAREER builder. I feel that my skills would be a great match for the open position you currently have in your facility.
With over 30 years' experience as a boring mill machinist, I can offer your company both top-notch creative services as well as a strong set of technical skills. In my previous positions has led me to your door and our future.

My goal is to make money for my employer. In turn I expect to be well compensated for my abilities.

I am a CNC Boring Mill Machinist. Note that I did not say operator; for I have never been an operator; but a Machinist.

I started in the Machinist trade in 1974 as an Assembler for two years as I went to night school and studied Machine Tool Operations. I learned from an old Tool and Die Maker. It is ironic as I think back to those days. He said, Dave, you will be one hell of a man in the Machinist trade because you care a great deal and have a high standard of workmanship.

As I progressed in trade school, a position opened up for a Mill Hand at company in Illinois called Hills McCanna. I was the only one who applied and in a week I was taking a 1in. Hog Mill 2in. Iong and I buried it in stainless 316. I was taught by an old Polack. Within two years I was on the Bridge Ports doing small castings; ones that they needed to fill an order. All this time I was looking to better myself. My foreman said, "Dave, you are making me so much money on little toy Bridge Ports its time to move onto Devliegs." This is where I stayed, not at Hills McCanna, but at boring mills. I learned CNC at Accura Tool and Mold on a Matsurra. We had Mazaks and no one knew Fanucs control, Mitsubishi 3000 I taught myself in 1990 and I loved It. I did mold plate cores and cavities, side locks pins and everything.

One thing I did that others could not, was to hold. 0001. It is not easy, but as long as I took it step by step and followed my plan I was great at it. I feel as good as I think I am and that I can be that much better, To better myself. I may say something here that I learned long ago that the machine has to be square to the spindle and that can only be checked by putting an indicater over the spindle on the table and moving the saddle in and out along the spindle and adjusting the saddle up or down lazers do not work good enough in my opinion or down lazers do not work good enough in my opinion. A s you will read I feel I am worth the money that I want which is 25.00 an hour.

Thanks for taking the time to know me I know I would be a great addition to your team.

QUALIFICATIONS: Measure dimensions of finished work pieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures. Remove and replace dull cutting tools. Mount, install, align, and secure tools, attachments, fixtures, and work pieces on machines, using hand tools and precision measuring instruments. Listen to machines during operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines to compensate for problems.
Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
Stop machines to remove finished work pieces, or to change tooling, setup, or work piece placement, according to required machining sequences.
Lift work pieces to machines manually, or with hoists or cranes. Modify cutting programs to account for problems encountered during operation and save modified programs. Calculate machine speed and feed ratios, and the size and position of cuts. Insert control instructions into machine control units to start operation.

Education:

Immanuel Lutheran grade school
Dundee, ill
Graduated 1964

has.
Dundee comm.
Dundee, Il
Grad.1968
Math was my subject
And engines

E.C.C.
Elgin,il
1968-1970
Liberal arts

1974-1977 also at e.c.c. for machine too tech

USAF
1970-1974
Weapons mechanic
2 tours of duty in Vietnam
Honorable discharge

Employment:

1974-1977 hills McCanna
Mills, bridgeports, cinncinatis,kerney and trucker
3.45-6.50 an hour
Moved on for a better opp.

1977-1985
Cary metal products inc.
Carpentersville, ill
This was a great place to work I ran a Bridgeport for a week the owner said to run the devliegs and really make him some money we made printing press machines
I ran wotans devliegs and did internal gear boxes
Intersecting bores at different angles I held them in line within. 0002, first I ruffed them out let. 03 on each side
Then lined them up to finish.everything, from milling square within.0005 I rotated the table and indicated the cut to. 0000,or if it was on an angle I would use the tang,of the angle x length of side I just did this kind of work fascinated me and I excelled to the top of the ladder very quickly:: :::: note:: :: I am not a know it All by no means I learn then I go for it::
I enjoyed my work there >
The place went broke the engeering to develop a much smaller product out of the large products cost the co. millions, t went broke

We started there with 8 people when it went under we had 200

I was a supervisor on nights of 50 machinist my number 1 goal was communication with the employees on my shift then to day shift, communication is the key to making money, for evey new job my shift would have a meeting of the minds, i am sure u know what i mean, then move on the task at hand.
6.50-11-00

Continental can company
West Chicago, ill
1985-1987
15.00-18.00
This is where I shined I held scary close toll.. It was a good plan that helped me thru. First I communicate very well and I get along well with others.
I ran cnc. devlieg jig mill

I used my. 0005 and. To get me close then I brought out my. 00005 for fin.
We made can making machines and closure machines. Also gear boxes (very large ones)

1987-1995
Accura tool and mold
Crystal lake, Il
Made mold bases cores and cavities
And held. 0001 on bores and. 0005 on locations.
Wotan boring mills
Ceruti
Cnc matsurra 5 axis boring mill with mit.3000 controls I programmed my self
Huraki 5 axis boring mills
Cnc g&l boring mill 5 "
Head of boring mill department
Mazak h800
12.00-19.00

Accura was bought out.

1995-2000

Atols tool and mold
17.00-19.00
Cnc g&l 5"-6" 800 controls and 8000 like fanuc

Very large dies and mold boring mill dept head
Night shift
Was bought out

2000-2003
Akuma vert. Programmed except for contouring then the programmers did that
23.00-26.00
Mold bases, cores and cavitys very high tech ones for the medical field very close work

April 2003-march 2005
E.M.F. inc.
Merritt island, fl
Dave Clark is the owner
Job shop for the kennedy space center
Wotan
Cnc Malo 9 axis this is not a misprint
18.00-18.50 the reason I left was no air-cond. The owner said he would do it but he did not.

Columbus McCinnon corp.
Sarasota, fl
18.00-20.00
Lucas 4 "
We do a series of tire shredder

Available Upon Request
References

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 3487)

Go to Search Parameters...

Brief Description

National Diploma in Chemistry and 28 Years experience in Laboratory work and management.

My field experience is 20 years in monitoring, planning and executing exploration programme for following minerals,1.coal, 2. iron-manganese, 3. tungstan, 4. diamond,5. lithium-rubidium-cesium, 6 copper. Leasing and liasoning work with govt. and private cos. Project manager-05 years exp.

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

reclamation and quarry

Extensive field application and R&D experience in hard rock drilling rigs, rock tools, DTH hammer, strong trouble shooting skills of hydraulics

I have basic education, knowledge and experience as for Project Metallurgist

Experienced (+29 years) professional geologist with field and laboratory background and prospecting/exploration for gold, PGE and base metals.

mine management, mining engineering opencast & u/g, planing & designing the mine , liaisoning

i am the man for your work ,i have run all different kinds of boring mills

A professional (M.Sc.Degree) well qualified Instrumentation / Process Control Engineer, with 28 years in-depth design, management, consulting, maintenance, and teaching experience.

Experienced Coal Geologist and Oil & Gas Development Geologist, results-oriented, very strong mappiing, modelling, drilling program design and oversight.

20 years experience in mine planning and mine operations in several countries including Australia, India, Japan, Jordan, Indonesia, South America and North America.

Twenty years of mining experience gained from working in industry and from consulting. Thirteen years of direct operational experience that has encompassed underground mining as well as surface alluvial and marine diamond mining operations.

Seeking a Senior management position in operations, design-build, EPCM, contract management, and business development in either the domestic or international industry.

A dynamic and enthusiastic Chartered Mining Engineer with MBA and extensive International Business Management and Change Management experience. Committed to continual improvement in people, safety, quality, efficiency and profitability.

Seeking a position in which proven technical, organizational, assessment, and communication skills as well as project management skills are utilized for the successful discovery and/or mining of ore deposits in complex and challenging geologic terrains.

A professional Mining Engineer with 15 years experience in mine ventilation

I am an experienced senior geologist aged 36 and I believe your company offers the right opportunity for my development into senior management. I hold a Bachelor of Science Degree from the University of Zimbabwe, which I obtained in 1994. I also hold a Certificate in Mineral Resources and Geological

Geophysicist with 30 years of experience in aeromagnetic surveys, Remote Sensing and GIS data analysis for geological mapping ,mineral ,oil exploration ,geo engineering and geo environmental projects. I also possess knowledge of “KingdomSuite” ,“Geosoft” packages and FORTRAN,C,C++. Interested in ch

Masters in aviation and Wing Commander

Senior Hydrogeologist

A HIGHLY RESOURCEFUL SENIOR MANAGER with proven track record & 20 years’ extensive Management and International experience in the Industrial, Financial Institution, Small, Medium and Large Business Sectors : HR Management, Business Management, Project Management

Graduate Mechanical engineer, having hand on experience of more than 12 years in diamond core drilling, water well drilling, deep hole drilling, deep knowledge in tool pushing, mentainance of drilling machinaries,great capabilty of leadership quality and team building.

B.E(mining),MBA, Marketing,14+ yrs experience in Mining Industry in Underground,opencast coal mines.

An experienced metallurgist position in R&D in mineral processing/gold extraction /mining waste remediation and/or technical improvement on mill operations in concentrators

I have 10 years experience in the analytical laboratory and i have well rich experienced in the all kind of analytical lab instruments like (ICP,AAS,XRF,etc..)

Plant operations, process design and engineering, flowsheet development, and consulting to the gold, precious metals, base metals, and ferrous metals industry. Extensive experience in comminution, specializing in autogenous, semiautogenous, and conventional grinding.

Results-driven, customer focused professional with extensive experience managing and turning around operations, leading people and project teams, implementing and overseeing cost reduction/revenue enhancement programs, and administering multi-million dollar budgets.

Professional Geologist with 29 years worldwide experience in all aspects of exploration geology, wants an interesting and challenging position.

Senior exploration geologist with over 20 years experience in gold and basemetal exploration in New Zealand, Australia, Papua New Guinea, Indonesia and Romania. My specialty is the exploration for gold and copper deposits in remote areas and developing countries

A Master of Science Mining Engineering (Project Management) and a Bachelor of Science Mining Engineering coupled with 20 years of underground mining, supervisory and technical experience in massive and narrow vein gold and base metal deposits.

General Manager with large scale mining, construction and service industries experience. MBA and engineering degree plus advanced training in TQM, TPM, ISO, and Team Building. Strategic and tactical planning and expert level problem-solving skills. Turnaround experience.

Twenty five years domestic and international experience in Prime Contracts and Subcontracts Management & Administration and Pricing involving all aspects of the procurement cycle.

Experienced management professonal in international contracting to the mining industry. Willing to relocate.

Presently working in At the post of MANAGER. Before M/s Bhushan I was in M/s MSP steel and power limited.(Jan. 2006 to Aug. 2006) and M/s Jindal steel & power Ltd.(1996 to 2004). I have experience in project, operation, maintenance and commissioning of heavy me

Commissioning/SCADA systems/Electronics/mining industry

Engineering Manager, Project Manager, Engineering Specialist

1. Oil and gas EPC experience for four years. 2. Design and engineering of static equipment. 3. 10 plus years' experience in mining industry. 4. Expertise in maintenance of static, rotating and utility systems. 5. Bachelor's degree in Mechanical Engineering and Master's degree in Maintenance Mgmt.

Maintenance oriented. Highly skilled and experienced.

Im a fitter with alot of skills, like winder fitter, hydraulic fitter, maintenance, heavy duty fitter. Hydraulic and pneumatic experience, reading off hydraulic drawing. do designing, planning and building of new power packs for raise bores aswell.

27 years underground -production&movecrew&dead work,good worker&very dependable.

32 years process maintenance, budgeting, maintenance planning, condition monitoring. set up PM programs. scheduling. manage personnel. training. project management. Reliabilty Centered Maintenance.liner configuration.

SR PROCESS CONTROLLOR,LAB INCHARGE,FIRE ASSAY TECHNICIAN,PRECIOUS PLANT SHIFT INCHARGE,SUPERVISOR

32 years experiance in the mining industry. I worked as a Shaft Timberman(17years),Shift Boss on Developing, Tramming& Construction (9years), Diamond Drill Supervisor/Foreman/Site Manager(4years)

I am a Geologic Engineer with more than 9 years of experience. I have worked for multiple mining companies in Peru. Basically I have worked for open pit operations, but I also have experience with underground mines. I am experienced whit mine geology (ore control), porphyries of Cu-Mo, epithermal.

Experienced Safety Manager. Experience at Head/Regional./Site Office level. Experienced in setting up sites and on-going training of personnel. Writing Site Specific Management Plans and up-grading of overall management systems a speciality.

Chemist/Metallurgist - Graduated from the western Australian School of Mines; Australian resident status; Experience in characterization and processing of rocks, minerals and coals; strong background in analytical chemistry.

I have more than 15 years experience in the industrial field, but I am certified in the field of quality management and assurance, and right now I am working as quality management and assurance manger in ole jordan(bmw, rover and mini automotive dealership) and I have been worked in arab potash comp

VP exploration of several junior mining companies. Responsible for the discovery and development of 3 MOZ (+) Au Charaat deposit in Kyrgyzstan. Twenty six years experience in Ore deposits discovery and development with emphasis on Au as well as Cu, Mo and W

I have 25 years experience in mining. My day-to-day output reflects a high level of motivation, efficiency, and ability to meet any objective. I have a proven ability to troubleshoot, perform under a minimum amount of supervision, and demonstrate a high degree of initiative and good judgment.

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out