Resume - I have worked in management positions for over 15 years in both the construction...

Misco Jobs

Resume #77781

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Work for a company that can use my talents and enhance my knowledge through continued learning and growth. Increase and improve company growth through productivity in workflow improvements while at the same time increasing quality. Build a careers with a company that is willing to retain, empower and compensate employees that show a willingness to improve company and work conditions, with continued profitability because of their hard work.

WORK EXPERIENCE:
Company: LADS, Inc. Work (307) 782- 6103
General Contractors Cell (307) 679-8395
P.O. Box 130
Robertson, WY 82944
Contact: Alan Harmon CEO
Title: Foreman (July 05 – Nov 2008)
* Overseeing all building aspects including structural completion, sub contractors for plumbing, electrical, cabinet installation and flooring installation to maintain schedule and insure efficiency and quality are maintained.
* Integral part of all finishing details of project, insuring that homeowner is satisfied with final product.
* Responsible for procuring all necessary products for completion of project.

Company: Tony Divino Toyota (801) 394-5701
777 West Riverdale Road
Riverdale, UT
Contact: Russ Layton General Manager
Title: Sales Consultant (June 03 – July 05)
* Used communication skills in the initial contact with customers, to defuse tension and create a positive environment.
* Maintained and exceeded a quota of sales each month.

Company: LADS, Inc. Work (307) 782- 6103
General Contractors Cell (307) 679-8395
P.O. Box 130
Robertson, WY 82944
Contact: Alan Harmon CEO
Title: Laborer (August 01 – May 03)
* Worked in areas of construction including concrete pouring and finishing, structural framing, carpentry finishes, tiling, installation of cabinetry, etc.
* Worked with Forman to make sure project is on schedule and quality standards are being maintained.

Company: INNERSTEP (520) 294-0781
3280 E. Hemisphere Loop Suite 140
Tucson, AZ 85706
Contact: Jorge Pozo V.P. Sales & Marketing
Title: Program/production Manager (May 99 – June 01)
* Major electronic circuit board manufacturer
* Worked with customers to insure that product was being built to specifications.
* Production employees totaling 40, under my direct supervision.
* Increased quality assurance from 75% to 96% during my tenure.
* Decreased cost of Labor 30% while increasing efficiency of workflow by 8%.
* Trained all production leads in using "on time delivery" programming so that they understood where product should be in our process at any given time, ensuring total customer satisfaction.
* 70% of our product was military based.

Company: Todd Engineering (520) 889-9333
3280 E. Hemisphere Loop Suite 154
Tucson, AZ 85706
Contact: Richard Todd President
Title: Division General Manager (Feb 84 – March 99)
* Builder of DC Power Supply and other product for RV industry
* Over 60 Employees under my direct supervision including Procurement, Accounting, Production and Quality Assurance departments.
* Worked with corporate headquarters in organizing and maintaining proper inventories to increase cash flow while still maintaining production efficiency.
* Increased production in our division from 85% to 94% efficiency.
* Traveled three weeks out of each quarter to meet with current customer base and to insure satisfaction of product line.
* Worked in sales to generate new business, increasing sales in our division from 2 million to approximately 7 million over 5 years
* Worked on floor with production employees to understand their daily routine and find out how the production line could become more efficient, making sure that employees had all the tools necessary to complete there work in an efficient and qualitative way.

EDUCATION
* (1987-1993) 3 years of college completed University of Arizona
* Business Management University of Phoenix

INTERESTS
Family, religion, basketball, management, carpentry, concrete work, tile work

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2701 to 2750 of 3494)

Go to Search Parameters...

Brief Description

Working as a safety officer in petrochemical company with 5.5 years of experience .

Highly qualified in security, safety and rescue work, a lot of experience in helicopter rescue, work and training camp experiences, military education, calm, reliableand flexible

Getting ou of the wood industries, use to work long hours alone, I'm really independant and i don't need suppervision, i'm able to solve any problem that can show up to me

Qualified Boilermaker, Current Bluecard, Worsley inducted, MC License, Confined spaces trained, Currently studying Cert 4 in OH&S

Seeking a position as an Exploration Geologist/ Mining Geologist/Resource Geologist, utilising my past professional experience and educational background

Instrument Specialist with over 13 yrs experience in both domestic and overseas facilities.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

I'm a certified SAP SD consultant with a domain of 2 years in marketing.

Dear Sir,

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

I have worked in management positions for over 15 years in both the construction and manufacturing industries. I have had up to 120 employees under my supervision at any given time. HR, production, purchasing, documentation and inventory all under my supervision. Workflow and quality #1 priority.

Construction / mining / environmental

I have experience in Project management and planning, Maintenence Management and planning, Civilworks, Mechanical and electrical experience

Ph.D. in Geology from IIT kharagpur, M.Tech.in Geology from IIT Roorkee, India

Troubleshoot equipment an identify need for new equipment and/or modification’s to existing equipment, optimizing throughput and minimize equipment downtime.

BSc Applied Geology, with experience in near surface gold exploration as well as geological modeling of various ore bodies at a consultant level. Knowledge of mine design software such as Datamine and also GIS software. Competent traveller.

CSWIP 3.1 Welding Inspector, ASNT Level-II in NDT's RT/UT/MT/PT, ISNT Level-II in leak testing methods, Over 7.5 years in QC & Inspection with reputed Indian Multinational

I am a seasoned American Registered Professional Civil Engineer with a record of repeated success on diverse Administration & Management career experiences through out the United States, Central America, and the Middle East.

20 + Years Experience / Supervisor / Heavy Equipment / Haul Trucks / Will Relocate

Having 16 years experience in pumping and assescories of Pipe line, Motors, Engines, System study, Trouble shooting etc. Having abroad experince. Visited Lao PDR, Thailand, Srilanka. Handled Project works at varoius sites in India and in Abroad.

EPLAN, Siemens SIMATC WinCC Step7, Ladder Programing, Rockwell Automation SW, Function Block Logic Programing, Statement List Logic Programing, AutoCadEnergy Solutions Leak Detection Tools (Pipeline Studio, ESIForms)Microsoft Office (Word, Excel, Power Point, Visio), MS Projects, MS computer OS

A high qualified mechanical engineer, Looking for challenging and rewarding career. My major Industry experience has been with a CAT Dealership in KSA; however my Sales & technical skills give me versatility within any Business which seeks excellence in product support functions.

I am a graduate metallurgical engineer with experience in melting of steel and cast iron. I have also worked as a corrosion engineer.

I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

licensed automotive technician(redseal endorsement)other skills, welding, autobody, automotive electrical

I can work with any environment

HSE Manager, Advisor for International Oil/Gas Company, Led Assets to top quartile performance. Graduate engineer and Certified Safety Professional

Dedicated hard worker with 10 years mining experience.

Chemical engineer seeking new oppertunities

I have previously worked as a Mechanical Engineer for a Japanese EPCC Company (Shinryo Malaysia Pty Limited) for five (5) years specializing in Quality Assurance / Quality Control. My last project for Shinryo Malaysia was for Malaysia’s largest Oil & Gas Company Petronas in Helsinki, Finland.

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

Experieced in reliability improvement by implement RCA, RCM and Condition Monitoring technologies. Certified as Vibration Analyst Category III.

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

HR, Payroll, Operations

Numerous years experience in structual welding, maintanance, and repair. Self starter with manager experience in same fields.

Water treatment chemist

MIT educated program manager/engineer seeks full-time employment in engineering, financial modeling/investing, or engineering management involving optimization, system identification, simulation, graphical user interface design/implementation, and/or control system design/analysis.

AUTOCAD

Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation

Over 20 Years Experience Process Operator,Commissioning and Start Up Heavy Oil ,Oil and Gas Production

Trucking experience 20 plus years, good on tools, excellent mechanical understanding

Experienced electrical sales, buyer, customer service,contract negotiations,job bidder

Land surveyor with over 30 years experience

Just finished college. I currently don't have any experience but am a willing and fast learner.

BSc Geology (University of Botswana) 2001-2005, GDE Mining (Rock Engineering) University of Witwatersrand, Johannesburg, South Africa 2009-Current. Geologist - geological and geotechnical core logging, scanline mapping, soil profiling and chip logging. Diamond and percusive drilling supervision

Extensice technical skills incorporating computer literacy & engineering discipline. Highly regarded for a proactive attitude and an ability to thinl literally, providing idead & solutions. A dedicated individual, achieving reputation for consistently going beyond what is required.

Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.

Geothecnic, environmental, hydrogeologic, operation

Heavy Equipment Operator/Upend Labourer

Accountant Objective: To be a part of a professional organisation, work for the progress of the company, as well as for self development.

First Prev 51 52 53 54 [ 55 ] 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out