Resume - I offer extensive experience in construction and heavy industry in a wide range ...

Misco Jobs

Resume #78207

CONTACT INFORMATION:
View contact information...

HSE Manager, Fluor Arabia Limited, Saudi Kayan U&O Project 2008 – Current
The manning levels for the Fluor Utilities and Offplots (U&O) section on the 1.8 Billion USD Saudi Kayan Petrochemical Complex is peaking with 9200 personnel, of which my area of responsibility covers the Port Facility, Royal Commission Corridor and the Saudi Aramco Juaymah Gas Plant works.
Major accountabilities relate to all HSE aspects of project execution from civil works, below and above ground services, steel erection, the installation of capital components, E&I systems, pre commissioning activities and environmental performance and compliance
To satisfy these accountabilities in my current role, I must ensure the HS&E expectations and directives of both the Client and Fluor are met and manage supervisors, inspectors, nurses, medics, and other employees working in the HSE department. I must also;
* Monitor the HSE programs and site conditions at all work sites during daily, weekly, monthly and quarterly inspections and audits and work on continuously improving the current system.
* Oversee incident investigations and help form part of the team that will conduct investigations of incidents that could result in litigation before writing the final report including recommendations for corporate review and release to appropriate stakeholders.

* Develop and present recommendations and advise to all levels of management to help ensure there is a balance between productivity and the safety of all stakeholders.
* Create and establish project HSE programs, databases and filing systems to address program gaps and to continuously improve existing systems.
* Maintain liaison with client representatives, company and client HSE personnel, professional associations and regulatory agencies.
* Assist other business lines, projects, and company organizations with improvement to their HSE programs and systems.
* Maintain liaison with the owners' representatives, the community, and the corporate HSE group.
* Providing a regulatory interface for the project.
* Producing and supporting HSE education and training programs for all stakeholders including contractors and subcontractors while continuing with my own education as part of the continuous improvement cycle.
* Represent the company in outside HSE organizations such as the Safety Institute of Australia (SIA), American Society of Safety Engineers (ASSE) and client (ARAMCO) steering committees.
* Ensure timely reporting of HS&E incidents.
* Verify that contractors develop and implement suitable Safe Work Plans; this may include assistance in the form of training and development of specific Safety Task Assignments, Risk Assessments and Job Hazard Analysis for all high risk tasks on site.
* Monitor the condition of the contractor's camp and accommodation facilities to ensure compliance to legal obligations, and that no social/health and environmental issues develop.
* Maintain consistent interpretations of the project HS&E system for all stakeholders.
* Maintain an effective HS&E focused relationship with each contracts Project Manager.
* Direct the contractors HS&E managers and their supporting field safety personnel.
* Manage and supervise the application of the projects HS&E Management Systems by the assigned contractors.
* Monitor the contractors HS&E performance and drive continuous improvement.
* Apply the practices of Behavioural Based Safety Management to interactions with the workforce.
* Ensure contractors develop and maintain emergency response plans acceptable to both the company and the Client and that those documents stay current.
* Advise, consult, guide, and assist sectors, divisions, regions, or corporate departments in HSE matters.
* Initiate and maintain HSE awareness programs and foster such programs to improve awareness.
* Provide guidance to management through interpretation of HSE Practices and Procedures, legislation, and regulations.
* Participate in monitoring and controlling HSE standards and applicable legislation and regulations.
* Inspect, monitor, and evaluate HSE programs for value and effectiveness.
* Retain flexibility with due consideration given to the disciplines of the workforce, the cultural norms of a significantly diverse team and sensitivities related to our Client and the location of the project
HSE Manager/Supervisor, Fluor Arabia Limited, Yansab U&O Project 2006 – 2008
The manning levels for the project peaked with 7900 personnel on the 1.4 Billion USD YANSAB Petrochemical Utilities and Offplots (U&O) works for which Fluor is the principal contractor
Major accountabilities relate to all aspects of project execution from civil works, below and above ground services, steel erection, the installation of capital components, E&I systems, pre commissioning activities and environmental performance and compliance
To satisfy these accountabilities I must for assigned contracts:
* Ensure the HS&E expectations and directives of both the Client and Fluor are met
* Maintain an effective HS&E focused relationship with each contracts Project Manager
* Promote and facilitate compliance with the Fluor Project HS&E procedures by both Fluor Area Construction Managers and their specialist staff
* Direct the contractors HS&E managers and their supporting field safety personnel
* Manage and supervise the application of the projects HS&E Management Systems by assigned contractors
* Monitor the contractors HS&E performance and drive continuous improvement
* Apply the practices of Behavioural Based Management to interactions with the workforce
* Coordinate the HS&E aspects of Non Destructive Testing (NDT) including radiography, hydro and gas pressure testing
* Supervise, from an HS&E perspective, the chemical, oil, air and steam cleaning, flushing and preservation of systems and subsystems
* Ensure contractors develop and maintain emergency response plans acceptable to both Fluor and the Client.
* Conduct investigations and ensure timely reporting of HS&E incidents
* Verify that contractors develop and implement suitable Safe Work Plans
* Seek and maintain consistent interpretations of the Fluor project HS&E procedures
OHS&T Supervisor, Ok Tedi Mining Limited 2001 – 2006
Training and safety concerns for all load shifting and scaffolding on site including Auditing, JSAs, STAs, Lift Plans and RAs conducted on the Ok Tedi Goldmine with an annual profit of 2 Billion Papua New Guinea Kina (PNGK).

Loadmaster and HSE Rep, Hevilift Helicopters Pty Ltd 2000 – 2001
Managed the loading of aircraft and the safety of a multidisciplinary team of workers to mobilize and erect exploration drill rigs and distribute mining supplies/chemicals to various companies in Papua New Guinea (PNG) and Indonesia for clients such as Chevron-Texaco, BP, Parker Drilling, Schlumberger and Pertamina.

Rigging Supervisor and HSE Rep, Creative Design 1999 – 2000
Trained and led a team of local workers constructing and erecting various antennas and towers for the Airport Locator Beacon System throughout isolated locations in PNG.

Loadmaster and HSE Rep, Columbia Helicopters 1997 – 1999
Managed the loading of aircraft and the safety of a multidisciplinary team of workers to mobilize and erect exploration drill rigs to various companies in PNG and Indonesia for clients such as Chevron-Texaco, BP, Parker Drilling, Schlumberger and Pertamina.

OHS&T Supervisor, ABB Construction and Engineering 1996 – 1997
Ensured the safety of ABB personnel at Chevron's Kutubu project in PNG including maintenance of the Central Production Facility, construction of the Gobe Production Facility and installation of the "Xmas trees" on all new well heads.

Leading Hand Rigger/Scaffolder/Crane Operator, REB Engineering 1989 – 1996
Responsible for training and safety in various mine shutdowns with new personnel while focused on leading the crew to complete the tasks assigned by the deadlines given.

Rigger, Scaffolder, RD Erections and Superior Scaffolds 1986 – 1989
Worked as part of a scaffolding and rigging team at various refineries, power stations and chemical plants, including Ampol, BP and Incitec Fertilizers.

2008 – 1st Year of Masters Program, Workplace Health and Safety, Curtin University
2003 - Diploma, Training and Assessment Systems, Training Unlimited Australia
2003 - Certificate IV, Workplace Trainer and Assessor, First Choice
2000 - Certificate IV, Open Crane Operator, More Skills Training Services
2000 - Certificate IV, Forklift Operator, Major Operator Training Services
1999 - Certificate III, Digital Arts, TAFE, Red Hill
1987 - Certificate IV, Advanced Rigger, TAFE, Ithaca
1987 - Certificate IV, Advanced Scaffolder, TAFE, Dutton Park

Affiliations
Member of the Safety Institute of Australia (SIA)
Member of the American Society of Safety Engineers (ASSE)

Knowledge, Skills and Proficiencies
* Currently studying 2nd year of Masters Degree Program in OHS majoring in Environmental Safety Management
* 8+ years HSE experience with Oil & Gas and Downstream Chemicals
* 12+ years international work in three countries with multidisciplinary/multinationality teams
* Teamwork – Part of a team that helped achieve 20 million hours man-hours LTI Free on two separate projects.
* Customer Focused – Ensured contractor companies compliance with Clients requirements and environmental and safety regulations
* High Performance – Helped reduce AFR/IFR to record lows
* Problem Solving – Identified safety issues and risk trends and presented solutions that averted significant exposure for my employer
* Training – Mentoring employees in their roles and responsibilities for 20+ years; Additionally I hold a Diploma in Training and Assessment Systems.
* Very competent with report writing and programs such as the Microsoft Office Suite.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 3489)

Go to Search Parameters...

Brief Description

Commercially minded, minerals industry professional with proven managerial ability, drive and entrepreneurial flair. An accomplished senior level negotiator, project manager and concise communicator with mature report-writing and analytical skills. Proven competency to Executive Director level.

A Melbourne based Geophysicist with PhD and 6 years experience in potential field geophysics. Fields of Interest: Gravity, Magnetics, Radiometrics, Electromagnetics, IP, GIS, and Computing. Highly skilled in data and image processing techniques.

6 Years Experienced Exploration And Field Geologist. Drilling Programs, Core Logging And Ore Sampling Open Pit And Underground Mining Experience. Sedimentary Basins And Environments In Special Clays And Sulphate Deposits, Mississippi Valley Type Deposits. Contracts With Drillers, 2d-3d Modelling

As a mining engineer, planning and design have my main resposibilities. Giving well informed information and mining options that adhere to both company objectives and operational realities is at the heart of what I do.

Has Nationa Diploma in mining,Bsc Honours Mining Engineering.Experience in mechanized mining. Highly safety conscious. Good management skills.

20+years of open pit mining and process experience in lime, cement, aggregate and industrial minerals. Registered Professional Engineer, former Director of Operations for a $220,000,000 industrial minerals division. Trained in ISO, Lean, Total Quality Management and other methodologies.

B.E. - mining engineer

Attentad last year geological survey of india interview

Workability with GIS SOFTWARES and Geological works, also can work in Hydrogeology & Geochemistry field

Fresh graduate looking for an exploration geologist position

I offer extensive experience in construction and heavy industry in a wide range of roles and positions with a detailed theoretical and practical working knowledge of the following that I have developed over the previous 22 years of my career as both an OHS&E Professional and a team leader.

Communication, teaching, presentation, problem solving/analysis, organisation, Diplomacy, software programming and mechanical design, high level general IT.

electrical/mechanical maintenance supervisor

I have a diploma in mining engineering with 1st class manager's certificate, and15 years of experience in opencast mining operations. Skills like active role in mine production planning, cost control, inventory management ,equipment productivity, team-building & training, statutory requirement.

Mining engineer

M.Tech in Mining Engineering,having about 4 year mining experience in production and planning, Knowledge of 12D Model Software.· Received environmental training in Environmental Requirements,Integration of Reclamation & Mine Planning , Received Safety Training in Mine Safety Programs, Philosophy ,

Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants

Industrial Journeyman Electrician-28 years

Experienced (11 years) General Manager, Plant Manager, Maintenance Manager, H&S Manager

disiel mec h with experience trucks;earthmoving and hydroluics

Well experienced Financial Director with CA(SA) and Masters Degree in Accounting. Vast African and International experience. Was in charge of 18 African operations in 10 countries. Gets the job done within deadlines. Very accurate and technically astute.

Experienced Oil and Gas HSE professional

Looking after Maintenance and repairs of Heavy Earth Moving Equipment, Construction Equipment and Commercial Vehicles

I am highly motivated Geologist / Geoscientist with degrees in Science (Earth Science: Geology) and Geomatic Engineering (Honors) from Melbourne University.

Graduated Mechanical Engineer,Certified Caterpillar Engineer, Experience as a Field Engineer in the Gas & oil, Marine,Mining Industry

Looking for a position with your company in Il. I have 20+ years in the mining industry. I have been a face boss- shift mine manager and general mine manaqger.

twelve years experiance in mining all open pit running haul trucks and graderds and scrapers dozers and many more

Plant Foreman with ten years experience in gold processing plant.

Experienced in Drilling of soils/rock for groundwater exploration and Lignite exploration in Opencast mines

An Exploration geologist With experience in Mineral Exploration, Mudlogging, Material sourcing, Mining and Steel

Seventeen years experience in the mining field, surface and underground. BCOA Certified. A Certified Surface and Underground MSHA Trainer for Heavy Equipment and Construction practices. Illinois/Wyoming Certified Supervisor and Shotfirer. FBI/ATF Clearance.

Please see the attached cv.

Aspire for higher position of Management.

- 3 years financial model build and auditing; - 6.5 years mining, exploration and resource modelling;

A Mining Engineer with nine years post graduate experience. A holder of a blasting licence. Currently studying for a Masters in Business Administration Degree. Last position was Underground Manager in Malawi. Am Computer literate. have done planning, production and management.

I am searching for employment with a company with longevity and stibility.

7 months Trainee at the International Institute for Geo-Information Science and Earth Observation (ITC), The Netherlands. Educational assistant first-year practical “Rocks, Maps and Profiles” '02, Part-time field assistant '99-'01. Member of the board of the Geological Society of Utrecht,'99-'00

Experience summary: Mergers and Acquisitions Advisory, Investment Banking, Valuations, Strategy Formulation and Implementation, Quantitative Analysis, Budget Planning, Commerical Proposals, Business Development, Competitve Strategy

Experienced and competitive Mining equipment technician. Excellent for all range of products from Atlas Copco.

I am the miner who has the blasting certificate, i have been been working under the stoping, development and the trackless sections, I have reached all my monthly calls , all my working areas have been declared safe. I am the undergratuate at University of JHB in mining engineering.

A young graduate who is capable of performing roles with little supervision. A very determined practical person, with the ability to learn new things. I enjoy and work well as part of a team, yet equally at ease working on his initiative

Mechanical Engineer, Project Manager

I am working as a planning Engineer. I am B.E- Civil Engineer graduate. 2.5 years of experience in construction field. Extensive knowledge in PRIMAVERA P3. Experience in Planning Division •Good knowledge in MS Office

PRODUCTION SHIFT INCHARGE.DRILLING INCHARGE.PP MODULE,PRODUCTION &DRILLING PLANNING .B.Sc in mining engineering(4 years),present time in ACC HOLCIM chaibasa cement works

trackless fitter

25 years experience. Plant Manager and Area Production manager.

20+ years in the gold mining & milling industry, multifaceted processing career including start UPS, operations, supervision and training.

I have 12 years experiance as a Gold Room Refinery Operator.

To ensure the safe utilizing of assigned equipments by assigned subordinates, resources, competencies and skill to meet daily planned productions targets.

Qualification is Diploma in Mining Engineering and having surveyor certificate under indian mine act 1952, having your required experience is 15 years remaining details are given in resume.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out