Resume - Research Thesis on ANTENNA/RF

Misco Jobs

Resume #78215

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To obtain a full time employment in the area of RF systems, Antenna design, CDMA, or any area that meets my abilities and gives me opportunities to sharpen my technical knowledge.

SKILLS
* Languages: C++, SQL, VHDL.
* Operating System: UNIX, MS Windows, MS Office.
* Simulation Software: Ansoft Designer v3.0, MATLAB, PCAAD 5.0, Modelsim, TINA Pro.
* Hands On: HFSS v10.0, CST, Anechoic Chamber.

WORK EXPERIENCE (3.5 years)
* Research Assistant, Electrical Department, San Diego State. (2 Years)
Academic Grader, Research on Instrumentation Circuits, Antennas.

* Assistant Teaching Tutor: C++ language, San Diego State. (6 months)

* Technical Support: Flextronics Software Solutions, India. (3 months)
Troubleshooting Technical Issues for US company i.e. HughesNet

* Technical Support: IBM Daksh, India (5 months)
Troubleshooting Technical Issues for US company Hewlett-Packard.

INTERNSHIPS
* Semiconductor Complex Limited, India.
Engineer Trainee ~ VHDL Implementation & Simulation (Design and Implementation of VLSI Chips in VHDL)
* Jupiter Radios TEXLA Television, India.
Engineer Trainee ~ Assembling and Testing Unit

EDUCATION
* M.S. in Electrical Engineering (San Diego State, CA) (Aug 2006-May2009)
* Bachelor of Engg. in Electronics & Telecommunication (Rajasthan University, India) (2001-2005)
Achievement: Academic Honors (73%)

RELEVANT COURSEWORK
Antennas & Wave Propagation, Advanced Topics in Antennas, Digital Communications, RF Wireless Systems Design, Coding Theory, Digital Signal Processing.

M.S. THESIS

Title
" Performance of Microstrip Patch Antennas and Arrays on Electromagnetic Bandgap Structures "

Skills Learned and Completed
* Antenna radiation pattern measurements using a simple setup.
* Network Analyzers for the scattering parameter measurements.
* Antenna Simulated: Microstrip Patch antennas with different feeding techniques.
* Used network analyzer for impedance measurement and used simple transmitter/ receiver setup for radiation pattern measurement.
* Ansoft Designer full wave analysis software for modeling and simulation of various types of planar antennas and microwave components.

Continued…

KEY ELECTRICAL PROJECTS

* PERFORMANCE ANALYSIS OF BLUETOOTH EDR WITH BLUETOOTH v1.1
Basic baseband block of Bluetooth v1.1 and Bluetooth v2.1 – EDR standards and comparison of their performance for various parameters like BER, signal to noise ratio, receiver complexity, power efficiency.

* DESIGNING OF FM MODULATOR/DEMODULATOR USING 14 STAGE POLYPHASE FILTER:-
Achieved using 14 Stage Polyphase filter. It involved the designing of Gaussian pulse to mitigate the effect of Inter Symbol Interference.

* FREQUENCY AND TIME SYNCRONIZATION IN OFDMA:-
Using short preamble in between OFDM symbols, we can achieve frequency and time synchronization and by using long preamble we can achieve channel equalization i.e mitigating the effect of channel distortion.

* BASEBAND BEHAVIOURAL MODEL FOR A BLUETOOTH SYSTEM BASED ON STANDARDS:-
A brief introduction of Bluetooth specifications is given and the background knowledge for implementation of this model on a behavioral level is also presented. In the model, synchronization in demodulation part has been focused on.

* ARITHMETIC AND LOGIC UNIT and UART
ALU can perform shifting including all other options like Addition, Subtraction, Multiplication, Division with the use of Registers.

* HEXAPOD ROBOT
It was based on control systems; a microcontroller programmed chip was used. (The Robot takes another path if any obstacle comes in front of it.)

REFERENCES (Please feel free to contact them)

1) Prof. Satish K. Sharma, San Diego State. Email: ssharma@mail.sdsu.edu 2) Prof. P. T. Kolen, San Diego State. Email: kolen@mail.sdsu.edu
3) Team Lead, Samrat SenGupta, Flextronics Ltd, India Email: sammy08@gmail.com

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3001 to 3050 of 3493)

Go to Search Parameters...

Brief Description

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

Heavy Equipment Operator (Certified)

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.

SAP FICO consultant with 10 years experience

Graduated in the field of Mechanical Engineering and presently working with one of ADNOC Group of companies as a Maintenance Planner / Scheduler (Mechanical). Have been associated with Oil & Gas sector for more than 4 years. Work experience on CMMS and Primavera skills.

A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects

Seeking Chemist or Laboratory Technician Position-will relocate

Research Thesis on ANTENNA/RF

25 yrs Heavy diesel mechanic in Construction and Pipeline

Can handle all operations of a mine surface or underground. See resume for additional experience and qualifications.

Heavy Equipment operator

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Finance*Strategy*Management*Sales*Contracts*Financial Services*International/Global Trade

Experienced excavator operator on most models of machine up to 80 tonnes. Expierinced in both Civils and Demolition. I am willing to work over seas if needed.

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation

I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Multi-skilled operator, decision making

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Eletro/Mechanical Technician, Applications Engineer

Pro Engineer 2+ years experience

Canadian Medic

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

Senior administrative skills, leadership, international recruitment, training, generalist HR, education, liaison,

During my studies I worked in cooperation with the Egyptain Geological Survey in the Eastern and Western Desert of Egypt and in another project together with the University of El Jadida, Morocco. Main subjects were mapping and sampling as well as geomagnetic. Working experience is shown in my CV.

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.

Experienced Automation/Process Control Engineer

Tender Administrator

Master Mariner and have experience as Senior Officer on LPG Carriers

DRILLING FLUID ENGINEERING ( MUD ANALYSIS), SURVIVAL AT SEA AND HELICOPTER UNDERWATER ESCAPE TRAINING, M S SUITE

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

Geotechnical, Geological Exploration, Resevoir geologist

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

I am confident that my training and experience in the area of safety and health as well as international teaching and program development skills would benefit a company that is seeking to excel in this area.

Im instrument Engineer ,experianced in controlling physical parameters(temp, press,flow) using microcontrollers,control aspects, designing new control systems,installation and maintainence

Underground coal geologist, geophysics data processor, field geophysicist, geophysics interpretation, BSc (Geology), Bachelor of Econmics

Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management

My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI

Qualified Instruments Technician with a National Diploma and Certificate of Apprenticeship

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

First Prev 51 52 53 54 55 56 57 58 59 60 [ 61 ] 62 63 64 65 66 67 68 69 70 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out