Resume - Engineering & Engineering Project Management

Misco Jobs

Resume #78695

CONTACT INFORMATION:
View contact information...

EDUCATION & CERTIFICATION:
------------
1993 - 1997 University of Parahyangan, Indonesia
Bachelor Degree
Major: Civil Engineering

EMPLOYMENT BACKGROUND
------------
Duration: August 2004 - now
Company: PT International Nickel Indonesia (subsidiary of Vale INCO)
Company category: Nickel Mining
Title: Process Plant Senior Civil/Structural Engineer
Responsible: As Project Engineer or Civil Design Engineer responsible to design, review drawing and raise Engineering Work Package (EWP), review tender document from contractor, material preparation and supervise construction for all Maintenance and Operation project related to Civil & Structural Steel Work at Furnace and Kiln Area.
Assist Project Manager to control the project construction in order to ascertain that the project will be executed as per drawing, procedure, cost, schedule and comply with safety objective.

Duration: December 1997 – August 2004
Company: PT Rekayasa Industri
Company category: EPC – Engineering Procurement and Construction
Title: Civil/Structural Engineer
Responsible: Design Analysis for steel structure, concrete structure and equipment foundation. Preparing structural design calculation report and engineering drawing.

WORK EXPERIENCE
------------
Duration: January 2008 - Present
Company: PT International Nickel Indonesia (subsidiary of Vale INCO)
Title: Project Engineer and Civil Design Engineer
Project & Job Description:
* Kiln Refractory Partial Reline
Prepare construction method both casting or gunning reline.
Release Engineering Work Package, review tender document from contractor, expedite material preparation and supervise construction during Quarter 2 and Quarter 3 2008 Major Shutdown.
* Kiln ESP Upgrade
Review drawing of new ESP Support (Structure and Foundation)
* Sulphur Line Upgrade
Design new pipe rack for new sulphur pipe line.
Prepare engineering drawing and release Engineering Work Package.
* Kiln Feed Bin Building
Design feed bin building extension to accommodate reversing conveyor to reach ore bin.
Prepare engineering drawing and release Engineering Work Package
* Drainage at Kiln area
Design drainage system at Kiln area
Prepare engineering drawing, release Engineering Work Package, review tender document from contractor.
* Transfer Car Rail Repair.
Prepare construction method to repair concrete pit and replace rail.
Release Engineering Work Package, review tender document from contractor, expedite material preparation and supervise construction during Quarter 2 2008 Major Shutdown
* Platform for maintenance purpose
Design platform to accommodate maintenance crew to maintain equipment such as calcine crane, bin, lighting, slipring, stack, etc.
Prepare engineering drawing and release Engineering Work Package.
* Technical Support to Maintenance and Operation related to Civil/Structural Work.

====================

Duration: June 2006 – December 2007
Company: PT International Nickel Indonesia (subsidiary of INCO Ltd Canada)
Title: Project Engineer and Civil Design Engineer
Project & Job Description:
* Kiln ESP Ducting Support
Design support for new Inlet and Outlet Ducting of Kiln ESP.
Prepare engineering drawing, release Engineering Work Package (EWP), review tender document from contractor, expedite material, expedite fabrication and supervise construction.
* Switch Room at Calcine Crane Girder.
Design switch room at Calcine Crane Girder to protect electrical panel from dust.
Prepare engineering drawing, release Engineering Work Package, review tender document from contractor, expedite material, expedite fabrication and supervise construction during Quarter 1 2007 Major Shutdown
* Crane Operator Cabin Replacement.
Design new Cabin complete with AC and pressurized unit.
Prepare engineering drawing, release Engineering Work Package, review tender document from contractor, expedite material, expedite fabrication and supervise construction during Quarter 1 2007 Major Shutdown.
* Transfer Car Rail Repair.
Prepare construction method to repair concrete pit and replace rail.
Release Engineering Work Package, review tender document from contractor, expedite material preparation and supervise construction during Quarter 1 2007 Major Shutdown
* Structural repair and strengthening.
Design structural repair that corroded such as walkway, pipe support, building, etc.
Design additional support for structure due to additional load; i.e. additional load from piping at pipe rack or pipe bridge..
Prepare engineering drawing and release Engineering Work Package.
* Technical Support to Maintenance and Operation related to Civil/Structural Work.

====================

Duration: August 2004 – June 2006
Company: PT International Nickel Indonesia (subsidiary of INCO Ltd Canada)
Title: Project Engineer and Civil Design Engineer
Project & Job Description:
* Furnace Roof Brick Replacement
Design new furnace roof brick and easier installation.
Prepare engineering drawing, release Engineering Work Package (EWP), review tender document from contractor, expedite material, expedite fabrication and construction supervision during Quarter 1 2006 Major Shutdown.
* Furnace Transformer Replacement
Design temporary platform that used during replacement and modify transformer room.
Prepare engineering drawing, release Engineering Work Package (EWP), expedite material, expedite fabrication and construction supervision during 2005 and 2006 Major Shutdown.
* Structural repair and strengthening.
Design structural repair that corroded or broken such as platform, pipe support, furnace building, slab, furnace shell, etc.
Prepare engineering drawing and release Engineering Work Package.
* Technical Support to Maintenance and Operation related to Civil/Structural Work.

====================

Duration: April 2004 - August 2004
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: Proposal preparation
Job Description:
* Preliminary design for proposal purpose

====================

Duration: December 2003 - March 2004
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: Kujang 1B Project (Consortium PT Rekayasa Industri, IKPT & TEC)
Client: PT Pupuk Kujang (Persero)
Job Description:
* Design Analysis for Ammonia Pipe Rack 3, preparing structural design calculation report and engineering drawing.
====================

Duration: February 2003 - November 2003
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: NPK Fertilizer Project
Client: Malaysian NPK Fertilizer SDN BHD
Job Description:
* Design Analysis for Bulk Material Store, preparing structural design calculation report and engineering drawing.
* Design Analysis for Duct Support, preparing structural design calculation report and engineering drawing.

====================

Duration: December 2002 - Februari 2003
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: CO2 Removal Project
Client: Pertamina DOH Jawa Bagian Barat
Job Description:
* Design Analysis for Pipe Rack, preparing structural design calculation report and engineering drawing.
* Design Analysis for Lightning Tower, preparing structural design calculation report and engineering drawing.
* Design Analysis for shelter such as Nitrogen Shelter and Water Treatment Shelter, preparing structural design calculation report and engineering drawing.
* Design Analysis for Flare Stack, preparing structural design calculation report and engineering drawing.
* Design Analysis for Pipe Stanchion, preparing structural design calculation report and engineering drawing.
* Design Analysis for several equipment foundation such as Boiler Package, Water Treatment Package, IA/PA Package, Gas Dryer Package, Portable Tank, responsible to prepare structural design calculation report and engineering drawing.
====================

Duration: December 2002 - Februari 2003
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: Gas Booster Station Project
Client: PT Perusahaan Gas Negara (Persero)
Job Description:
* Design Analysis for Flare Stack, preparing structural design calculation report and engineering drawing.
* Design Analysis for Pond, preparing structural design calculation report and engineering drawing.
* Design Analysis for several equipment foundation such as After Cooler, Close Drain Drum and Horizontal Vessel, responsible to prepare structural design calculation report and engineering drawing.
====================

Duration: November 2002 - December 2002
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: PMS Rimba Belian
Client: PT Perkebunan Nusantara XIII
Job Description:
* Design Analysis for Pressing Station Foundation, preparing structural design calculation report and engineering drawing.

====================

Duration: Februari 2002 - November 2002
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: NH3 Tank
Client: PT Petrokimia Gresik
Job Description:
* Design Analysis for several equipment foundation such as pump, compressor, refrigerant, separator, vaporizer responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis stanchion for pipe support, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for Lightning Tower, preparing structural design calculation report and engineering drawing.

====================

Duration: Februari 2000 - Februari 2002
Company: PT REKAYASA INDUSTRI
Title: Civil Engineer
Project: Kaltim 4 Project(Consortium PT Rekayasa Industri and Mitsubishi Heavy Industry)
Client: PT Pupuk Kalimantan Timur (Persero)
Job Description:
* Design Analysis for Central Control Building, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for Foundry Shop, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for some equipment foundation such as Demineralization Package, Gas Turbine Generator (GTG), Waste Heat Boiler Package (WHB), Pump, Air Compressor, Plate Exchanger, Tank, Natural Gas Knock Down, Air Receiver, Nitrogen Generator, responsible to prepare structural design calculation report and engineering drawing.
* Assistance Engineer for Sea Water Intake Design, responsible to prepare structural design calculation report and engineering drawing.
* Assistance Engineer for Chlorination Foundation Recovery due to settlement, responsible to prepare structural design calculation report and engineering drawing, join with PT Soilens (Soil Investigator) and Bandung Institute of Technology (ITB).
* As Assistance Engineer to check/revise Pipe Rack engineering drawing due to additional load from Piping.

====================

Duration: November 1999 - Februari 2000
Company: PT REKAYASA INDUSTRI
Title: Civil Engineer
Project: NPK Gresik
Client: PT Petrokimia Gresik
Job Description:
* Design Analysis for several equipment foundation such as pump, compressor, utility package, preparing structural design calculation report and engineering drawing.

====================
Duration: December 1997 - November 1998
Company: PT REKAYASA INDUSTRI
Title: Civil Engineer
Project: Semen Kupang II Project
Client: PT Semen Kupang
Job Description:
* Design Analysis for several Equipment Foundation such as Cement Mill, Raw Mill and Coal Mill, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for Mix Storage Building, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for conveyor around Mix Storage Building

COURSE & TRAINING
-----------------
- English Course, conducted by International Language Programs (ILP)
- Design Analysis with British Standard Tutorial, conducted by Juru Tera Profesional Malaysia
- STRUCAD, conducted by PT Rekayasa Industri
- Layered Safety Audit conducted by PT INCO
- Managing Control of Loss conducted by PT INCO
- Reliability Centered Maintenance (RCM) conducted by PT Relogica Indonesia
- Hydropower Technology Course conducted by Genesis Energy Ltd
- Pembinaan K3 dan Lingkungan Pertambangan untuk Pengawas Operasional Madya, conducted by Direktorat Teknik Mineral dan Batubara.
- Basic Safety: Confined Space, conducted by PT Alkon Trainindo Utama
- Corrosion Control Management, conducted by PT Handal Wira Mandiri
- Basic Safety: Working at Height, conducted by PT Alkon Trainindo Utama
- Safe Excavation Procedures and Method, conducted by PT INCO
- Project Management Basic, conducted by PT INCO
- Microsoft Project, conducted by PT Andalan Nusantara Teknologi
- Risk Management, conducted by PT Alkon Trainindo Utama
- Material Bulk Handing, conducted by Martin Engineering
- Financial Awareness, conducted by PT INCO
- Basic Safety: Isolation & Lockout, conducted by PT Alkon Trainindo Utama

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 3444)

Go to Search Parameters...

Brief Description

I have extensive mining and heavy equipment operator experience and training.

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

Equipment Operator

HSEC Training Coordinator, SHE Coordinator, Heavy plant Mechanic and Mechanical Engineer as back ground.

I graduated in May 2008 from Virginia Tech with a Bachelors degree in Mining Engineering. I have excellent computer skills and have experience working with many software programs including Vulcan, AutoCad, SurvCADD, and Microsoft Office.

Field geologist with background in ArcGIS and Gemcom's Surpac, proficient computer user and excellent communicator.

Trade Qualification in Heavy Plant Mechanic. Knowledge of CAT and Komatsu machoines.

Seeking a position where I will be able to use my knowledge and talents to meet my employer's expectation.

Field Engineer, Instrument Specialist, Instrument Technician, Instrumentation and Controls, DCS, PLCs, Turbine Controls, Power Plants, Pipelines, Refinaries, Steel Mills

Experienced Mining engineer in large scale openpit Mines with knowledge of SAP and Materials Management and controlled blasting

Highly skilled carpenter 17 years experience. Related work includes structural steel erection, connecting and rigging. Poured concrete, scaffold set up and tear down, foreman for residential housing from framing to finish carpentry.

40 years of underground mining experinece in all phases of mine development. I've supervised crews of 20 or more miners and operators, and have experience in the operation of underground haulage equipment, shaft sinking equipment and drilling/blasting equipment such as jumbos and jacklegs

Irish Australian coal mining operator, excavator upto 400 tonne, haul truck , water cart etc.

Bachelors degree in Chemical Engineering with Minerals Engineering, 4 years experience with a global mineral processing company.

I am formerly a Sr. Maintenance Engineer responsible for the Maintenance and Project implementation of several Petro Chemical Plants. My responsibilities included supervising anywhere fro 10 to 200 mechanics at any on time. I was also resposible for budget up to 7million US.

CAWI - AWS (MIAMI); Qualifications NDT - SNT-TC-1A :Level II : RT and PT

Ten years of production experience, maintenance, quality control, and provisory experience in cement production and management experience in lime production and quarry operations. Directly worked with maintenance repair for the plant. Degree Geologist

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

License and experience geologist in the fields of mining and urban geology

Mining Engineer with 6 year 0f experience in mining industry

Engineering & Engineering Project Management

Instrument Technician/Electrician OR Instrument /Electrical/Electronics Engineer

Qualified dump truck operator for CAT 777 and Komatsu 785

Electrician

Project manager

Information Technology Vicepresident / Manager / Director / Project Manager

Journeyman Machinist 30 yrs.experience mechanical maintenance in oil and gas industries, mining, pulp and paper

SENIOR PROFESSIONAL MINERAL EXPLORATION GEOLOGIST/MANAGER with 26 years Global Experience. Gold Specialty but experienced in Base Metals and Diamond. Practicing Independent Qualified Person (QP) for Canadian Securities Reporting and Resource Estimations. MapInfo/Discover GIS User.

Mining Engineer with 30 years experience in metal/precious stones/alluvial deposits seeking managerial or consultant position with new or established mining projects

In Geotechnics I ensured the supervision, the control and the establishment of design reports for several geotechnical investigations of large civil structures in soft and hard grounds : special foundations, retaining structures, soil improvement and reinforcement by geosynthetics' products,

Geologist and expert of GIS/Remote Sensing and Digital Image Processing

Blast Hole Driller

Hello! Please consider my resume for your mining needs. Thanks for taking the time to look at it.

Construction Civil Superintendent (Earthworks, Infrastructure and Concrete)

I am a well-rounded mining engineer from the Colorado School of Mines (CSM) with 18 years experience, looking for an opportunity to help a surface mining company meet its goals.

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

I'm an Electrical Engineer and since 2005, i occupy the post of Maintenance Engineer (Electricity, instrumebntation and mechanic) in a mining industrie.

Senior Security Supervisor/Manager

Free! Bosun experience -aboard an ammunitions ship ,underway replenishment tanker in support of the Irag war - 2002 2003. Navy Bosun’s Mate - refrigerated stores ship - fleet oiler 4 years.

4 years experience as mechanical engineer; 5 years experience as a C/C++-programmer;2 years experience as an electronic engineer

I have experience working as a Grade Control Geologist as well as a Pit Technician and I am proficient in the use of Vulcan, Datashed and Microsoft programs. From previous work as a Customer Service Representative I am expensed in dealing with customers and supervising employees.

I am a graduate from premium institute in India , Indian Institute of Technology . KHARAGPUR ( 1986-90 ) ; and am working in Coal India Limited ( Public Sector with 248 million tonne of annual Coal production ) ; since last 8 years .

I am a mine engineer with 8 months of open pit experience. I have numerous computer skills including Surpac. I also speak Spanish.

Jr. Engineer looking for new challenge

MIMS integrated software a speciality, particularly Finance modules, although familiar with functionality in other streams. Specific areas of expertise are the analysis of business processes & the design, implementation & support of MIMS. Familiar with the Corvu reporting tool.

Profile: - With over 9 years experience in IT Industry, I have been working as Senior IT professional using the latest technology and different environment (Web, client/server, Terminal Emulation) in different business sector I have worked through different technical and managerial positions.

I seek responsibility rather than avoid it. Contagiously enthusiastic and an excellent team worker, I show independence in all my work. I have much exposure to the engineering, IT, and construction industries. I communicate with ease and am known for my diplomacy and teaching skills.

Diamond Exploration and running diamond exploration laboratories,

Recognised qualified person (RQP) under rule 22C of Mineral Concession Rules, 1960, for preparation of Mining Plan and Scheme of Mining as required to be prepared under rule 22B of Mineral Concession Rules, 1960 & Mineral Conservation & Development Rules, 1988. (INDIA)

Field oriented structural geologist; Highly adept at working both alone and as part of a team; Strong analytical thinking; Technical writing and speaking; Multi-lingual; Eligible for Professional Registration; Willing to travel

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out