Resume - RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modic...

Misco Jobs

Resume #78936

CONTACT INFORMATION:
View contact information...

Age: 26
Nationality: New Zealand Citizen
Availability: Immediate

Summary

I am an enthusiastic and versatile Systems Engineer, with a degree in Computer Systems Engineering and 4 years in Software and Control Systems Engineering. I have developed a very diverse skill set. I am a strong leader with key skills in Systems Integration and Test Requirements analysis, Systems Design and Development and Software Engineering.

Education/ Qualifications

* Bachelor of Engineering (Hons.) - Computer Systems
Massey University, New Zealand, 2001 – 2004.

* High School A Bursary
Long Bay College, New Zealand, 2000 – 2001

Relevant Skills

Programming Platforms PLC:
* RSLogix 5000, PLC 5, SLC (Allen Bradley)
* Concept (Modicon, Quantum)
* Unity (Modicon, Quantum, M340, etc.)
* Setting up and commissioning of Advantys IO systems
* Some Siemens experience, S7
* C++ and Visual Basic

Programming Platforms SCADA:
* Rockwell, RSView
* Wonderware, Intouch

Documentation & Database Knowledge:
* Functional descriptions (FD's)
* Microsoft Excel Tool creation
* Microsoft Access Database Management
* Sequel database creation and management

Commissioning:
* Four years automation and on-site commissioning experience in New Zealand and China, including site support, client simulation and process development.

Professional Experience

Control Systems (Automation) Engineer
Macro Automation, Auckland, New Zealand - Nov 2004 to Nov 2008

My Primary Role was Control Systems Engineer/ Automation Engineer for an international company based in New Zealand, with contracts in China, Korea, USA and New Zealand. My responsibilities included;

- Development of functional process descriptions, working closely with senior process engineers and client;
- Planning and management of resources for existing and forthcoming projects;
- Liaising with the client and project manager with regards to the project, including software and SCADA client simulation;
- Was responsible for "out the box" PLC and IO configuration and implementation on and off site;
- Design and implementation of PLC code and SCADA development and programming;
- On site commissioning, starting from IO testing right through to plant hand over and acceptance;
- Further optimise or "tune" the control system to achieve productivity improvements, where possible, in both throughput rate and reliability;
- Ensure that any software improvements applicable to new infrastructure are retrofitted back into existing similar facilities where appropriate;
- Provide continuity of project technical support and coaching to Operations personnel, particularly where there is limited availability of experienced technical staff on site;
- Provide input into Safety/Operability/Maintainability design reviews for future projects

Main Projects

* 2008 - Was part of a major project for Dairy Trust, Synlait and OCC (Open Country Cheese). Three, four ton milk powder dryer and milk evaporator plants. I was responsible for the setting up of the IO and PLC networks on site. I had an integral part in the software design and programming of the PLC's and SCADA systems. (Unity and Intouch, using Modicon and M340 PLC's)

* 2008 - Programming and commissioning of a special cheese product factory for Fonterra. I worked with another engineer, but was responsible for the PLC programming of all the separator and pasteurizer systems, working closely with the process engineers and electricians. I was also responsible for the setting up of the VSD's and IO (Advantys, Schneider Electric IO Modules)

* 2007 - Completed a team project at Waitoa Factory, developing and implementing the powder transport systems and CIP systems. We where responsible for the development of a new programming and SCADA standard (S88). I was involved in the development and testing stages of the standard. (Logix 5000 and RSView, S88).

* 2007 – Project coordinator working autonomously on a waste water treatment plant and irrigation system.
- Tender document preparation and client liaising.
- IO allocation
- Database management and creation
- PLC and SCADA programming, design and integration
- On site commissioning and setup

* 2006 - Part of a commissioning team involved in the upgrade of the milk treatment system at Clandeboye Dairy Factory, Timaru. (Upgraded from Concept to Unity platform, 2000 IO).

* 2006 - Commission a pasteurizer and evaporator system at Mengui Dairy Factory, Beijing, China. I was responsible for the commissioning and programming of the systems, working closely with Tetra-Pak evaporator engineers to achieve a common goal. (Logix 5000, Plant Master Standard).

* 2005 - Programming, preparation and on-site commissioning for a CIP system at Edendale Dairy Factory Cheese Plant. (Logix 5000, PLC 5 and Intouch).

Referees
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 3494)

Go to Search Parameters...

Brief Description

As an, QC/ R&D Professional in Laboratory & Process areas with 17Yrs of Extensive experience in Plant operation, Chemical analysis by classical & instrumental methods in chemical, cement ,Ores , minerals, Ceramics Refractories & Metal industries ,wishing to work with the professional

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Very experienced Welder, Pipe fitter, Foreman

Attached please find my CV as application for the above or another suitable position.

Good manager- exact-lovely-like travel-profetional in supporting in surface and tunnel excavation-english and arabic and farsi -hard worker

Inspection, Record Keeping, Supervision, Lighting, Fire Alarm and Communication Installations in all the buildings, Cable pulling/arrangement/terminations, Panel Installations, Cable tray and Assorted Fabrications, Piping( PVC and Galvanized Steel), Pre and Post Termination Tests, Maintenances.

Production supervisor. Supervision and management of numerous mining, earthworks and civil construction projects in Australia and Africa. Experienced in operation of all surface mining equipment. Training of operators.

Experienced professional in Accounting

Geologist with 5 years experiences, with a blend of strategic and operational experience in coal exploration, with the combination of hard skill in geological mapping and drilling with soft skill in geographic information system, geological database up to geological modeling.

Qualified Plant Mechanic (UK City and Guilds Level III) currently working on contract with US Army in Savannah, Georgia, seeks contract in Australia. Anything considered.

Senior Technical Writer with >5 years experience

Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.

Good understanding of power/load calculation, drawing of wiring diagram, trouble shooting, installation of electric motor, contactor circuit, transformator and PLC

10+ years expereince in accounting, tax, audit. Expert in implementing MYOB Accounting

An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.

Microsoft Office, HRMS, Windows XP, Professional, other administrative softwares

Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Piping designer

Construction Management/Estimating/Supt/PM

Seeking Managerial or Supervisory position in Logistics & Transportation.

Chief Enineer, Limited, Oceans, Unlimited HP

A Safety Advisor who works with Management and Front-line workers equally to not only get the job done, but to make sure we get it done safely.

Experience in Automation Systems (Triconex Safety Control Systems, Honeywell FSC). Bachelor of Telecom/Control Systems Engineering. Experience in GCC countries. Currently working as an Application Engineer

23 Years of Various field of accounting

Director

Underground Miner : position in a Company where training abilities, work experience and advancement capabilities can be demonstrated.

Mechanical Engineer with experience in technology applications in different industries such as mining, oil and gas, & construction. During the past years I have worked with a Canadian company and greatly valued the experience and challenge. I am currently looking for full time employment in Canada

Shift Supervisor Shift Foreman

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

My areas of expertise are production, short-term planning and project management. I am a troubleshooter and leader that use influence to get things done

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Engineer / Management / Accounting / IS

i have three month experience in the oil field and one year experience on the mining field as a junior geologist. my duties are core logging,sampling, underground mapping and data acquisition,and Running/Monitoring (data collection) and processing of crude oil to the surface.

Driver, teacher, maintenance computer, air conditioning and electrician

Graduate degree in mineral processing engineering. Having more than 6 years of work experience in china clay and beach sand mineral industry.

I am currently Regional Safety Manager with Thiess John Holland in Melbourne Australia. I have extensive rail, mining and construction experience and have been involved in these industries for over 15 years. I have international experience, working with the Taiwan High speed rail project.

Achieve sustainable profit growth and customer happiness using technology to reduce costs and increase effectiveness of employee time.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Quality Control professional

Rotating & reciprocating equipment technician

Research Experience: Polymer solutions and adsorption behavior.

I am a Mechanical Engineer with a background in Electronics Technology. I have worked 2 summer for a Fording Coal Ltd. as a Mechanical Engineer. Currently I work for Weyerhaeuser as a Maintenance Engineer. I wish to back to the mining industry.

I am a Mining Engineering who graduated in 1999. After going through graduating training, I was appointed Overseer Miner at an Underground mine and then Shift Foreman at an Open pit mine. I have used the following computer packages, Lynx mining and SurpacVision.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out