Resume - Over 18 years of extensive experience Maintaining a Safe Work Culture, Budgeting...

Misco Jobs

Resume #80148

CONTACT INFORMATION:
View contact information...

TARGET: EQUIPMENT & FLEET MANAGEMENT
Over 18 Years of Leadership, Management, and Supervisory Experience within Equipment, Fleet and Facilities Operations - Subject Matter Expert in Equipment Maintenance Processes and Policies - Proven Track Record of Success in Meeting Goals Across Broad Areas, including 6-Figure Cost Reductions, Operational Reorganization, Equipment Utilization Increases, Multi-Location Management, and Technology Conversions - 12 Years of Experience in Mining Industry Equipment Maintenance

Results-proven management professional skilled in managing complex operations, diverse teams, and large equipment inventories. Decisive leader with exceptional team building, relationship development, and problem resolution skills applied to employees, customers, and partner companies. Skilled in training, mentoring, coaching, and evaluating team members. Astute analyst and planner in short-term and long-range objectives. Core knowledge and skill areas include:

Multi-Site Location Management Logistics & Supply Optimization Workforce/Resource Allocations Turnaround Management Plans
Quality/Safety Assurance Standards Facility Layout/Redesign Strategies
Asset Lifecycle Analysis/Evaluation Asset Utilization and ROI Results Enterprise Technology Integration Regulatory Compliance Matters Replacement/Rebuild Scheduling Executive-Level Recommendations

PROFESSIONAL EXPERIENCE

ERS CONSTRUCTORS (Pipeline Division of WSCI), Denver, CO, 2008-2009
Equipment Manager
Oversaw equipment fleet with 2,500+ pieces of equipment, including over 110 pieces of heavy construction equipment, 280 vehicles, 11 Class 8 trucks with trailers and 4 fuel/lube trucks; managed team and reported directly to the CFO of WCSI. Held full decision-making authority to specify, purchase, and sell equipment assets. Hired, trained, supervised, and retained employees. Negotiated national supply chain contracts and incentives, established equipment maintenance policies and procedures, developed and implemented vehicle assignment policies, and redirected equipment usage for highest utilization. Formulated positive cash flow and planned/administered department budgets.

Selected Accomplishments:
- Increased equipment utilization from 77% to 91% through the development of equipment availability schedules and communication of this availability to both division managers and field personnel.
- Transformed the Transportation / Trucking department into a revenue-generating operation, securing the necessary documentation, permits, and insurance that allowed department to gain revenues outside the company.
- Consolidated maintenance into a single shop location and shifted the utilization of the maintenance team members to provide in-house vs. outsourced repair services, leading to savings of up to 40%.
- Established the annual budget for combined WSCI and ERS departments in excess of $8 million.

ERS CONSTRUCTORS (Pipeline Division of TIC), Denver, CO, 2002-2008
Equipment Manager
Oversaw all aspects of equipment fleet involving 900+ pieces of equipment (over 90 pieces of heavy construction equipment, 120 vehicles, 11 Class 8 trucks with trailers, and 4 fuel/lube trucks. Managed $7 million annual budget. Developed immediate and long-range plans for fleet and equipment management, including preventive maintenance and service scheduling. Negotiated acquisitions, coordinated equipment utilization and transportation, and developed operator training/certification procedures. Created the "Below Zero" safety management program.

Selected Accomplishments:
- Revamped the direction, scope, and workforce within the Equipment department, reversing previous 4-year record of budget deficits and achieving positive gains in 4 of the last 6 years.
- Developed system for multiple location equipment maintenance and logistics management to align with organization's expansion goals, enabling the company to grow continuously over the past 4 years (with out-of-area and remote projects generating revenues of $21-28 million annually).
- Reduced maintenance repair costs by 12% each year from 2003 to 2006, generated $2.6 million reduction in total fleet ownership costs, and cut costs $45,000 annually through outsourced services.
- Participated on year-long conversion team, developing equipment segment of new SAP accounting system and strategies, policies, training, and oversight for "go-live" launch.
- Received 2 Safety Awards for over 70,000 man-hours/2+ years and over 30,000 man-hours/1+ year worked without a recordable incident, respectively. Initiated the 1-800 "Safe Driver" program.

AMERICAN CIVIL CONSTRUCTORS, INC., Littleton, CO, 1997-2002
Equipment Manager
Managed 4,500-piece equipment fleet, supervising direct reports in transportation, mechanic services, and administration (34 total personnel) while reporting directly to the company president. Developed fleet management strategies, capital expense and lease budgets, and preventive maintenance/service schedule plans. Formulated and managed $9 million-plus annual budget. Analyzed equipment cost and asset lifecycle to reduce costs, managed coordination of equipment utilization and transportation requirements, and established equipment resources for out-of-area projects.

Selected Accomplishments:
- Reduced repair maintenance costs by $226,000 over a 2-year period through development of preventive maintenance and service schedules, including oil sampling programs.
- Served as a key member of the conversion team, developing the equipment segment and interface for a new JD Edwards accounting system. Developed the solutions, processes, and team training to ensure that the system met its "Go Live" date on time.
- Recommended split of equipment department into 2 service areas (Heavy and Light Civil), resulting in improved communications/focus and service towards the needs of the company.

SAMSONITE CORPORATION, Denver, CO, 1997
Production Supervisor
Managed several areas within the Injection Molding department, including hard-side case components, small parts, maintenance, and tooling. Oversaw personnel, resources, processes, and projects.

Selected Accomplishments:
- Converted 5-day work schedule into continuous 7-day schedule within the Injection Molding department without incurring overtime costs. Reduced labor costs by 4+% as a result.

** Prior position as Maintenance Superintendent with Mid-Continent Resources, Inc. Managed fleet with 180 pieces of underground mining equipment. Additional employment information can be provided as requested.

EDUCATION & TRAINING

Certified Equipment Manager Program Association of Equipment Management Professionals
Mine Maintenance Management Colorado Mountain College, Glenwood Spring, Colorado
Automotive & Diesel Mechanics Central Texas College, Kitzingen, Germany
Managing Multiple Locations Skill Path Seminars, Albuquerque, New Mexico
Leadership Course, 36 Hours FMI Leadership Institute, Florissant, Colorado
Professional Membership Association of Equipment Management Professionals

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 3494)

Go to Search Parameters...

Brief Description

Experienced Mining Engineer, Production Manager and Planning and Quality Control Manager. Worked as Plant Manager and as Researcher for the Metals and Metallurgical Agency of Japan. This experience is supported by a BSc.Geology, a MSc.Economics and a MBA.

To obtain work in the mining Industry using my experience as a warehouse attendant.

I seek a position that will give me an opportunity to develop project strategies that enhance efficiency through the implementation of cutting-edge technologies, efficient application designs and intelligent reporting practices.

professional seeking new challenges.

Dynamic Safety / Training specialist with 12years within Open Cut mining environments.

Competent in all aspects of open cut mining.

Superintentant sand and gravel mining, from start to reclamation./ Clean construction debris and recyling site experiience.

I am a qualified geologist who graduated from the Ecole Nationale d’Ingénieurs du Mali (ENI) in 2001

Quality assurance, reserch and development. Section - Process control in charge, shift in charge

Over 18 years of extensive experience Maintaining a Safe Work Culture, Budgeting, Strategic planning, Policy Development/Implementation, Finance/Leasing, Fleet Maintenance/Management

COAL AND MINERAL MINING PROJECT MANAGEMENT (SCM / INVENTORY MNGNT / LIASIONING / COMMERCIAL / ADMIN)

Experienced Driller's Assistant

Young geologist looking for Interesting Career

Underground Geology Technician & Surface Worker

Graduate Surveyor, December 2008, Western Australia. Looking for mining jobs. Not limited to any location in Western Australia

Blaster, Driller, Driver

Sr Structural Designer / PDS FrameWorks Coordinator and project set up.

Free! Oil & Gas Finance, Commercial Manager. 30+ years industry and 20+ years international experience.

Masters Degree in Mining Engineering and Mineral Processing; +3 yrs work experience as Research Scientist within Global Engeering Services of International Industrial Minerals Company; fluent in English and German language

Accomplished, Achievement-driven, Results Oriented and Passionate about realizing a challenging career that allows meaningful contribution to Metal/Manufacturing Industry .Had 3 years of primary aluminum production industry experience and recently graduated in material science and engineering

Class 6 Underground Coal Miner. Certified Welder. Certified structural steel welder. Skilled in rebuilding all types of machinery. Skilled in running all types of equipment.

Piping Design & Stress Engineer, Caesar II, Rohr II, PDMS, Auto Pipe

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

Kimberlite Geologist / Angola / Portuguese speaking / 6 years experience / Planning, implementation and supervision of exploration activities.

15 years of dragline experience

Graduated from the University of Zambia in 1996 with a bachelor's degree in Metallurgy & Mineral Processing. Six years experience in the mining industry. Worked as a Production Operator for 1 year 4 months, 7 months as a Production Foreman. Worked as a Metallurgist for 4 years.

PROFILE: A self-motivated and hard working Geologist with experience in Mining and Exploration of gems, precious metal and industrial metals. A capable leader, able to use own initiative and work as part of a team.

Well rounded journeyman electrician looking for industrial, commercial or residential position. Experienced with supervising apprentices and other jw's.

Smart, skilled and experienced, electrical/ mechanical available for camp/ remote locations ( extreme camping)

I have been in mine maintenance for over 20 years, the last 9 as an expat in various countries around the world. I'm a very positive and progressive thinker who adapts to changes and adversties with little fuss. I like to succeed in everything I set out to do

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

„XRepaired Haul Truck s and Crawlers,„X Repaired Equipment, „XWorked as a field Tech, Operated Forklift ,Diesel Mechanic Intern

Young academically accomplished geotechnical engineer, practical experience in the mining industry both domestic and overseas.

Knowledge of Hydrotreating & Hydrocracking, Catalytic Cracking, Distillation and Amine plants. Knowledge of Process simulation (HYSYS, ASPEN Plus, PRO II and HTRI), PFD, P&ID, Flare and Relief systems, LDT, Hydraulic calculation, HAZOP review, Equipment sizing, TBE, DPDT and process data sheet

Crane operator

Obtenir un emploi dans une entreprise dynamique qui me permettra d’évoluer en utilisant mes connaissances et mes aptitudes et dans laquelle il existe des possibilités d’avancement. Face à un nouvel emploi, je recherche la stabilité, diversité et je désire relever des défis

25 years as a cook or manger in the food service operations

Diamond and RC Driller

I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.

Entry level geologist

I have experience in the following operations - excavation, ditching, levelling, hammering, drilling, charging, blasting, scaling, timbering, mucking, rock bolting, hauling, shot crating and concreting, steel set installation.

Bachelor degree of computer science and Seeking a challenging position, where my technical and communicational skills can be utilized and developed in field of software or quality assurance

Career Objective

Entry Level Mining Engineer

Mining Engineer Seeking employment in the mining industry that will allow career growth and the opportunity for advancement.

I am ready to work for the best of the company and my experience

Geological Engineer, mapping, petrography, reserve estimates, exploration, mining, import/export, well drilling, GPS, logging, geoframe, geographix, excellent vocational English, MS Office, MBA in Business Administration, Experience in Marketing

I am a recent Master of Business Administration graduate with a concentration in finance and a background in the mining industry. I am currently looking for a finance position with a mining or resource company. I plan to pursue an accounting designation and would welcome the opportunity to relocate.

I am looking for overseas work in the mining industry. I have seven years exp. in a wide variety underground operations.

Masters student in Materials Science and Engineering with BS in Applied Physics seeking engineering related position after graduation in Spring 2002.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out