Resume - Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax...

Misco Jobs

Resume #80736

CONTACT INFORMATION:
View contact information...

SPECIALIZATION:
------------
Process Engineering; Glycol Dehydration, Produced Water Treatment
Product Development; Solid/Liquid/Gas Separation Equipment
------------

OBJECTIVE:
------------
A position that will provide daily challenge in an environment which sponsors creativity and maintains accountability.
------------

WORK EXPERIENCE:
------------
RECENT EXPERIENCE
2006 to 2008: DPS-Delta, LLC New Iberia, LA
Sr. Process Engineer

Process Engineering, Glycol Dehydration
Khalda Petroleum Company (KPC) Salam Gas Train 3 and Train 4 TEG Gas Dehydration Unit (GDU).
Two (2) 120 MMSCFD GDUs operating at 1,000 psig drying to 2 lbmH2O/MMSCF
* Process Design, PFD-P&ID generation through preparation of Equipment and Instrument Data Sheets.
* Operator Training of 27 Egyptian engineers. This was a 24 hour classroom training course covering theory, design, startup, operation, shutdown, maintenance and troubleshooting issues relating SGT3/4.
* Commissioning and Start-up Lead for the Khalda Petroleum Company (KPC) Salam Gas Train 3. Train 4 was subsequently started by site personnel following the methodologies detailed during my Train 3 visit.

Republic of Iraq North Oil Company (NOC) Khurmala Dome TEG Gas Dehydration Unit (GDU).
One (1) 115 MMSCFD GDUs operating at 370 psig drying to 2 lbmH2O/MMSCF
* Operator Training of 4 Senior Iraqi engineers. This was a 24 hour classroom training course covering theory, design, startup, operation, shutdown, maintenance and troubleshooting issues relating GDU.

Nexus/Ramboll Generic I FPSO Gas Dehydration Unit (GDU). Drying 55 MMSCFD to 1.5 lbmH2O/MMSCF
Murphy Oil/SBM-Atlantia Thunder Hawk TLP. Drying 70 MMSCFD @ 2000 psig to 2.5 lbmH2O/MMSCF
Petronas Carigali Ruby Field FPSO GDU. Drying 12 MMSCFD to 6 lbmH2O/MMSCF
ENI/AGIP OML 120 Oyo Field FPSO GDU. Drying 60 MMSCFD to 1.5 lbmH2O/MMSCF
* Process Design, PFD generation and equipment sizing. Depending on the scope of the specific project or as requested by client performed detailed engineering calculations or advised on specific issues.
* In all cases above, extensive use of Bryan Research and Engineering (BR&E®) process simulation software ProMax® was used to optimize unit design. The integrated equipment rating packages were used to provide preliminary equipment sizing for columns and heat exchangers.
* Developed novel HTU/NTU calculation method to provide structured packing depth calculations.
* Provided process engineering support across global business platform.
* Detailed familiarity with NORSOK, API, ASME, NACE, NORSOK and ISO specifications.

Product Development, Pitless Air Drill Separator
Weatherford International, Research and Engineering
* Under contract to develop a portable unit to capture solids and dedust 6000 scfm of air-drilling solids.
* Pending order for first article to be fabricated and deployment to Western US for field testing.

PREVIOUS EXPERIENCE

2004 to 2006: Krebs Engineers, Tucson, AZ
Project Engineer

Project Engineer, Wellhead Desanding Hydrocyclones
Otway Gas Project Thylacine Field unmanned platform, Bass Straight Offshore Victoria, Australia
* Project execution requiring compliance with strict customer specifications in a difficult application in which due to the unmanned nature of the facility, operator intervention was not an option.
Pemex Luna Field onshore facility, Tabasco, Mexico
* Detailed 1-off mechanical design of 600# Class 20" Well Head Desanding Hydrocyclone with solids.
* Assisted with installation and pre-commissioning on site.

Project Engineer, Sand Washing Hydrocyclones
Shell/Albian Sands, Muskeg River Mine Alberta, Canada Also
Suncor Energy, Millennium Mine Alberta, Canada
* Twin development projects testing the feasibility of multi-stage sand washing. In both cases large and highly instrumented pilot plants were fabricated and shipped to site for field assembly.
* Supervised installation of equipment and assisted in site management to resolve specific fit-up issues.

2003 to 2004: US Filter Zimpro, Rothschild, WI
Process/Product Engineer
Process/Product Engineer, Produced Water
* Selected by USF/Zimpro Management for relocation to Rothschild, to function as key agent of technology transfer of USF/Whittier products to Rothschild Operations team.
* Lead Process Engineer for all USFilter produced water projects. Specific product management responsibilities for all Hydrocyclone, Induced Gas Flotation and Walnut Shell Filter package projects.

1998 to 2003: USFilter Whittier, CA
Product Development Manager
Process/Product Engineer, Produced Water
* Listed as sole inventor on both process and apparatus U.S. patents for "Hydrocyclone Bundle"
See US Pat. 6800208 and US Pat. 7291268. Completed all design work using 3D design software, and substantially wrote patent text (excluding claims).
* Responsible for the evaluation of technologies for internal development, licensing or acquisition. Working with sales department, identify opportunities to improve existing equipment designs. Provide process support to customers and sales department in selecting from the broad product portfolio of USFilter. Active member of the Separations and Filtration "Technical Expert Group", part of USFilter's North American Technology Center.

EDUCATION & CERTIFICATION:
------------
Bachelor of Science, Chemical Engineering, California State University (Long Beach), 1996
Certificate in Hazardous Materials Management, University of California Irvine 1994
------------

ADDITIONAL INFORMATION:
------------
Recognized by Bryan Research and Engineering (BR&E) as being a leader in the application of their Promax process simulation software in the areas of Gas Dehydration (TEG) and Sweetening (MDEA).

I have developed Microsoft Vision "Smart" P&ID stencils which, also extensive Excel calculational data sheets which leverage data values from Promax Reports and are capable of automation linkage with Promax directly.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 3489)

Go to Search Parameters...

Brief Description

I have experience working as a Grade Control Geologist as well as a Pit Technician and I am proficient in the use of Vulcan, Datashed and Microsoft programs. From previous work as a Customer Service Representative I am expensed in dealing with customers and supervising employees.

I am a graduate from premium institute in India , Indian Institute of Technology . KHARAGPUR ( 1986-90 ) ; and am working in Coal India Limited ( Public Sector with 248 million tonne of annual Coal production ) ; since last 8 years .

I am a mine engineer with 8 months of open pit experience. I have numerous computer skills including Surpac. I also speak Spanish.

Jr. Engineer looking for new challenge

MIMS integrated software a speciality, particularly Finance modules, although familiar with functionality in other streams. Specific areas of expertise are the analysis of business processes & the design, implementation & support of MIMS. Familiar with the Corvu reporting tool.

Profile: - With over 9 years experience in IT Industry, I have been working as Senior IT professional using the latest technology and different environment (Web, client/server, Terminal Emulation) in different business sector I have worked through different technical and managerial positions.

I seek responsibility rather than avoid it. Contagiously enthusiastic and an excellent team worker, I show independence in all my work. I have much exposure to the engineering, IT, and construction industries. I communicate with ease and am known for my diplomacy and teaching skills.

Diamond Exploration and running diamond exploration laboratories,

Recognised qualified person (RQP) under rule 22C of Mineral Concession Rules, 1960, for preparation of Mining Plan and Scheme of Mining as required to be prepared under rule 22B of Mineral Concession Rules, 1960 & Mineral Conservation & Development Rules, 1988. (INDIA)

Field oriented structural geologist; Highly adept at working both alone and as part of a team; Strong analytical thinking; Technical writing and speaking; Multi-lingual; Eligible for Professional Registration; Willing to travel

Project Management, Inventory Control, Contract Compliance, Accounting, Admin

Maintenance Manager in the Exploration Department of a Copper / Cobalt mine in the Democratic Republic of the Congo.

Experienced plant operator in gold and diamond processing with knowledge of crushing,screening, milling, flotation,SCADA system and Metallurgical Accounting system

I am a Mining engineer and I got Manager's certificate.I got four years experience with Continuous Miner technology and also I got quite good knowledge of Strata Monitoring instruments.I also got very good Computor skill.

currently postion: site engineer, with Orica PNG ltd, graduated with a Diploma form the University of Technology Lae, PNG.

Mining Shaft Supervisor, Equipment Operator, Maintenance Supervisor

Maintenance Technician - Fixed Plant

I have extensive experience in maintenance fitting , in mining and industrial fields

For the past 6 years, I have had a rewarding career as a mining and geotechnical engineer and as a surveyor. My educational background includes different aspects of earth sciences (Master of Science in Mining Engineering). I have worked in mining operations and R&D as well.

MECHANICAL ENGINEER

New calédonian based Exploration and Mine Geologist, 5 years experience. Project management, core logging, mapping, strong structural geology skills. Proficient in the use of SURPAC, MAPINFO, GPS programs, Corel graphics and database programs. Available worldwide. x

10+ years of project management experience in the areas of accounting and financial reporting in various industries, including Management Consulting, Retail and Wholesale, Manufacturing and Distribution, Mining and Construction

4 years underground mining experience, current MSHA, 2009 Underground Blasting Training Course, Underground Core Skills Program,

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

Expert Contracts and Business Development Manager with more than 20 years of experience with major oil/gas operators in the Middle East and exposure to Contracts Management from start till award and post award, establishing new ventues in drilling, engineering and related fields, & procurement.i

I have confident, good communication skill, able to adapt to new environment very fast.

I am Mine Surveyor with more than five years experience in the Zimbabwean mining industry. I established survey offices at Sino-Zimbabwe Cement Company and Murowa Diamonds being the first permanent employed surveyor at the Mines. I have experience in Surpac, AutoCad and Vulcan mining softwares.

Previously employed to Rusal (Guyana) as a Planning Manager

D10 dozer, 637 push-poll scraper, Loaders, Crusher, Track-hoe, Blade, ect. Maintain equipment, water lines, sewer lines, house pads, Road construction, Airport construction, GPS. ect...

Exploration Geologist with 10 years of diversified experience

Production with safety

Mine Planning Superintendent

Professional Geoscientist with 7 years international field experience in mineral exploration. Setup, hiring, training of field teams of local geologists. Archean lode Au, umf-hosted Ni-sulfide, porphyry Au-Cu and gemstones. Dutch Guyana, Madagascar, Tajikistan, Uganda, Mongolia, Canada, Mexico.

Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts.

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Being an AutoCAD Drafter/Technician, I have had tremendous experience (10 years) in the Building Construction as well as Mining industries.

Rigger at mine construction uderground rigger,structural erection steel fabrication,demolist and asembly. 3G licence welder, scafolder.

Professional Mining Engineer (CEng MIMMM) searching for senior level position in a open pit mining project in FSU

Over 11 years of SAP BW BI experience as a developer, Lead and Manager

Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey

shipping Management, Stevedoring, Logistics

Successful track record for planning, organization, leadership and project completion Accurate record keeping and scheduling skills regarding personnel and maintenance Ability to develop and establish operational and administrative policies Excellent computer skills

Mechanical Designer using Catia -UG-Pro-E

B.Tech Mining Engg.

Having nearly completed a Bachelor of Business (Human Resource Management) I am keen to start exploring opportunities within my main area of interest.You will find me a self-motivated, hard-working employee who enjoys a challenge! I am outgoing and always give 100% when it comes to my job.

M.B.A. and Licensed Professional Mining Engineer with record of success in operations and engineering management. Creative problem solver with ability to develop real economic profits, lead during change management and create business strategies.

looking for mines manager job as i am second class mine manager certificate holder from directorate general of mines safety under India mmr 1961. and having nine years of experience in different minerals as a mines manager asst. manager.

Seeking a suitable electrical position that will utilize my skills and offer growth in the mining, manufacturing or construction industry.

Graduate Mining Engineer that speaks Spanish, English, German and French willing to work in the mining industry.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out