Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81 next resume »»
CONTACT INFORMATION:
View contact information...

EQUIPMENT OPERATED: JACKLEGS, JUMBOS, TRACK MUCKERS - J12’S + J21’S, 911’S, 912’S, 913’S, 915’S, ST5’S, HAUL TRUCKS, SINKING HAMMERS, 966 - 988 CAT FRONT END LOADER, AND CRAUTERMAN.

EMPLOYMENT RECORD

Geo Grout, Inc.: 04-29-00 / 06/16/00. Glenn, CA.
Driller and grout pump operator. Drilled holes for grouting levee on Sacramento River. $22.86 per hour. Supervisor: Hector Quiles

Frontier-Traylor Bros.: 10-21-96 / 11-14-97. Portland, OR.
Safety Technician on the Tri-Met light rail system.
Worked shift work doing on site safety in tunnels: pertaining to pouring
Concrete; grouting; installing rebar, hi-rail gear, equipment relating to track
and safety specifications; yard safety insuring that all hands operating
equipment are task trained before they are allowed to operate equipment.

OSHA requirements on site, both yard and tunnels; personnel to use PPE
at all times; safety belts and climbing harnesses; ventilation requirements for tunnel; hi-rail safety chocks (wheel). Markers for rail; wearing of safety
vest (orange with bright tape) while in tunnel and around yard for visibility;
safety glasses.

Guy F. Atkisson: 09-93 / 10-93. Buck’s Lake, CA.
Dave Brewton (Walker). PG&E power station. $22.75 per hour as a miner. Worked the bullgang cleaning up at the end of the job. Rehired from August as they let too many hands go and then had more work to do.

Independent Mining: 08-93 / 09-93. (Centennial Development, Riverton, UT)
    Elko, NV. Decline. $16.00 per hour and $40.00 per day subsistence.
Ran motors, jackleg, drilled and shot, hung utilities, general bullgang
duties.

Guy F. Atkisson: 07-93 / 08-93. Buck’s Lake, CA.
Dave Brewton (Walker). PG&E power station. $22.75 per hour. Miner
worked the bullgang until laid off.

Morrison-Knudsen: 08-26-91 / 02-28-92. Keddie, CA.
    Lock Spencer (Superintendent) and Matt Needles (Project Manager)
    $17.35 per hour. Miner – set steel, lagged steel sets, poured concrete,
grouted, shot-creted. Ground support on old railroad tunnel that had
burned and caved in. Equipment maintenance and prepare deck for next
phase.

National Projects: 02-23-91 / 04-23-91. Jacumba, CA.
    Lock Spencer (Superintendent) and Matt Needles (Project Manager).
$16.50 per hour. Miner – ground support on old railroad tunnel that had
burned and caved in. Stood steel, poured concrete, shot-creted, scaled, drove pilings, and grouted.

National Projects: 09-23-90 / 02-10-91. Christianburg, VA.
    Lock Spencer (Superintendent) $17.50 per hour. I was the Shifter.
Drilled sides to support ribs before cutting top out of tunnel. Grouted ribs,
hung wire for overhead support, shot-creted both portals, back filled with
gravel behind steel sets, and stood steel.

Morrison-Knudsen: 02-90 / 05-90. Martinez, CA.
    Lock Spencer (Superintendent) $16.75 per hour. Miner – drilled overhead
In tunnel for support after we had cut top out of tunnel.

Campbell Construction: 11-01-89 / 11-28-89. Redding, CA, Mercy Hospital.
    Shavon (Superintendent) $20.85 per hour. Miner – used 35 pound
spaders to bell out footings for parking garage.

Shank-Ohbayashi: 03-89 / 09-89. Los Angeles, CA.
    John Shulef (Superintendent) Troy Mongess (Shifter). $17.47 per hour.
    Bullgang – used cutting torch to cut shield out of heading, electric welder
Gun to seal plastic liner to seal out gas and water from tunnel, lay rail, run diesel motor running supplies to work area, roof bolting in areas where needed, cut cross-cut passes for electric station, set forms (both top and bottom of invert), changed out California rail at station and re-installed on other side. (Two tunnels running side-by-side). Remove and install concrete segments in bottom of invert, tied rebar.

Frontier-Kemper: (812) 426-2741 (home office) 09-21-88 / 03-07-89.
    Dave Gibson (Shifter) Tom Lynn (Superintendent) WIPP Site, Carlsbad,
NM. $15.44 per hour. Miner – used slip forms (self-climbing forms on
rods), jackleg, hung wire, liner plate, utilities (6” and 3” lines), rock bolted.

Dravo: (412) 566-6157 (home office) 05-02-85 / 09-17-88. WIPP Site,
Carlsbad, NM. Bud Lucas (Project Manager) $14.27 per hour. Miner –
running Jackleg for roof support, Gettman, LHD, trucks, hanging utilities,
grademan on road header, grading roads, assisting probe hole drillers,
training on road planer and roof bolter.

Ohbayashi-Gumi: (415) 346-6861 (home office) WIPP Site, Carlsbad, NM.
    Dale Blevins (Project Manager), Tom Combs (Superintendent), and
    Lock Spencer (Walker). $14.22 per hour. Miner – grademan on road
header, 912 and 915 loaders, truck driver, bulkheads, utilities (air, water,
and fan lines), jackleg operator for roof support.
Odessa College: (915) 358-4361 01-25-82 / 09-93. Odessa, TX.
Tom Reynolds and Verlon Horn were the immediate supervisors. $1,054.00 per month. Maintenance – electrical, plumbing, structural repairs, and boiler maintenance.

Frontier-Kemper: (812) 426-2741 (home office). 11-05-80 / 03-31-81. Douglas,
WY. Zane Painter (Superintendent) and Don Painter (Walker). $11.00 per hour plus bonus. Shaft miner – drilling with air augers, jackleg, pouring concrete, hanging steel and wooden guides, cutting stations, and
slushing.

Gilbert Corp.: 10-04-80 / 11-03-80. Rifle, CO.
    Shaft miner. $10.00 per hour plus bonus.

Centennial Development: 07-09-79 / 10-03-80. Red River, NM.
Lock Spencer (Walker). $12.30 per hour plus bonus. Leadman – shaft miner. Drilled with sinking hammers, jackleg, hanging steel, cutting stations, driving drifts.

Kerr McGee: 03-16-78 / 07-06-79. Church Rock, NM.
    Don Eroh (Mine Foreman), John Rios ( Walker), and Wiley Brooks,
    (Superintendent). $11.45 per hour plus bonus. Shaft miner – drilling with
sinking hammers, jacklegs, cutting station, changed out pumps, hung steel and wooden guides.

Park City Ventures: (801) 649-8107 12-77 / 02-78. Park City, UT.
    George Cado (Mine Foreman). Ontario Mine. $8.45 per hour plus bonus.
    Miner – worked opening new areas. Worked in stope, drove drifts, ran
electric slusher, jackleg, j12, j21, muckers, utilities, rock bolted. Mine closed 02-78.

Mid-Continent Coal and Coke: (303) 963-2581. 11-77 / 12-77. Redstone, CO..
    Miner – set steel, laid track, roof bolted, worked tailpiece.

Granite-Ball-Groves: 08-77 / 10-77. Dinkey Creek, Wishon Village, CA.
Leonard Jacobson (Walker). $12.10 per hour. Miner – set steel and drove tunnel.

Peter Kiewitt: (801) 882-1360. 07-77 / 07-77. Carrfork Canyon, Tooele, UT..
    Erwin Sass (Superintendent). $11.00 per hour. Miner – worked in station,
    drilled with jackleg putting up mats.

Anaconda: (801) 882-1431. 09-76 / 07-77. Carrfork Canyon, Tooele, UT..
    Fred Smith (Superintendent). $11.00 per hour. Miner – drilled, sinking
    Hammers, jumbo, hung utilities and slick lines.

R. H. Gunn: 07-76 / 09-76. Rock Springs, WY.
    Don Eroh (Superintendent) and David Tatom (Walker). $9.75 per hour.
    Miner – laid track, reclaiming stopes, rock bolted ribs and roof, mucked
    ran muck cars, LHD.

The Oaks at Lake Oroville: 11-73 / 12-75. Oroville, CA.
Andy Anderson (Leadman). $3.75 per hour. Mobile home service and set up.

Oro Dam Motors: 11-73 / 11-73. Oroville, CA.
    Rex McFerrin (Supervisor). $1.85 per hour. Parts salesman.

United States Marine Corps: 09-14-69 / 09-14-73.
    Sergeant. Ordnance detail, artillery, and security at weapons station.
    

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1201 to 1250 of 3444)Go to Search Parameters...
Brief Description
Looking to surround myself with quality people in a professional environment that strives for excellence in every task. To be a contributing member of a quality team. I want a position that allows me to grow as a person as well as an employee.
Objective: Crusher / Beltline / Stacker and Equipment Operator
Please find herewith the enclosed resume of mine for the post of Mechanical engineer. As I have more than 10 years full experience in the field Heavy earth moving equipment.
With Fourteen Years Experience in the mining field both construction and development. Nine Years Supervisory Experience. Eleven Years drilling and blasting. BCOA Certified. I feel I would be an excellent asset to your company. Certified MSHA Trainer. EMT 1 Certified. Il supervisor papers.
Metallurgical engineer seeking an extractive metallurgy or mineral processing position. Interested in areas where the main objectives are process improvements and quality control. Analytical and inquisitive with a Midwest work ethic.
COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management
x
Details of career brief version
13MONTHS - SAFETY 7 YEARS - SHAFT 5 YEARS - DRIFTS 6 MONTHS - STOPES
CFD (Computational Fluid Dynamics), Multiphase/Multi-component flows, Fluid Flows, FSI (Fluid Structure Interaction), ASI (Arbitrary Sliding Interfaces), Heat Transfer, Thermal engineering, Design/development, Combustion, Chemical/Reaction Kinetics and Chemical simulation, PhD, Mechanial Engineering
Metallurgy and Materials Engineering, Corrosion, Powder Metallurgy, Foundry Metal casting, Composite Materials.
Maintenace Electrical Foreman
Paramedic/Offshore medic with 19 years experience in Oil, Gas & Renewable Energy industries
I am an adaptable, enthusiastic and reliable person with experience on a large variety of CAT products, used to working under pressure, meeting deadlines, organizing and communicating.
I have 10 years of underground operations experience which includes. Haul truck, mucker, jackleg, bolters and jumbos.
Mine planning, designing and scheduling (B. Eng. in Mining Engineering)
Experienced, Bilingual Trainer Seeking HR or Marketing Position in Indonesia
Senior Estimator Available to work in Indonesia, Malaysia, Nigeria, Kazakhastan, Thailand
Technical and Operations Experience. Currently Long Range Planner / Dispatch Engineer. BEng educated at Laurentian University School of Engineering in Sudbury, ON, Canada. I am looking for advancement opportunities, in a fast-paced and team-oriented workplace.
16 years experience in the mining field both surface and underground, hard & soft rock. Construction and Development. Supervisory exp. Drilling and blasting & instructor. BCOA Supervisory Trained and a Certified Surface and UG MSHA Trainer. Illinois Certified Supervisor. Shot Fire Certified.
I am a CWI, Level II in MT, UT, PT and RT film interpretation. I have US and overseas QA/QC project and manufacturing supervisory experience in the construction, petroleum, mining and aerospace industries. References and copies of certs. will be provided upon request.
south african openpit blasting ticket
Automotive Engineer Trade certificate. Post trade Diesel Fitter Trade Certificate. Over 30 years of wide ranging experience including heavy euipment and mining equipment. Excellent diagnostice skills.
Worked on Procedure High Pressure Vessels, pipe welding,Millwrights, Mine Maintenance Supervisor Worked for 5 years (1994-1999) Steam and pressure pipe fitter, welding
Heavy Equipment Operator with 30 years experience both underground and open pit
Four years experiences in 3D seismic data processing (PP, SS, PS) and reservoir characterization (fracture detection using AVAZ; AVO and inversion), more than six years experience in commercial geo-software development.
Hands on professional with six years experience in OHSE management, analysis & trending, technical document writing, prevention programs, and worker’s compensation. Adept at bridging OHS performance gaps to complete business interests & conveying complex developments in a simple & compelling manner.
Mining Engineer (Recently completed 4 years degree) from Uninversity of Engineering & Technoloy, Lahore, Paskistan. Paractical traininig at Padrarh Coal Mines, Khushab, Pakistan. Surveying certificate from university. First Aid training certificatie.
E&I Supervisor or Tech
Sr. Field Engineer, 20+ years, excellent customer service skills, electro-mechanical repair, maintenance
Have worked 9 years in mining industry. during this period i worked as dumptruck operator, l.h.d operator, jumbo operator, shift coordinator and drill master. what i like and enjoy of my work is the challenge of keeping my-self,
I am a Journeyman licensed plumber with electrical certification(NC) I have OSHA competent person training for heavy equipment and excavation. I am gas tite certified and a good mechanical skil set.
I Started at Newmont Gold Company In 1996 as a miner trainee, within one year I was promoted to miner 3. I also worked for Stillwater mining corporation in Montana where I was a lead miner in charge of 15 miners and two levels of the mine.
Young energetic hard working safety conscious person with good experience in comissioning training and optimization of a gold treatment plant
Underground Mining, Roof Support team.
civil formwork
Mechanical Design Engineer for Oil and Gas with 10 yrs exp. for EPC companies
I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.I have experiences on leading the project with more than 1000 multinational employees and managed many sub contractors.
Electrical instrumental and electronic tecnician with 16 years experiences with very good knowledge mechanical and hydraulical system, Spécialized in open pit mining operation
Experienced in mining industry equipment, mechanical, electrical, hydraulic skills.
Hard working Mining Engineer with 10 years experience in underground mine development, mine prodution and monitoring including safety, health and environment aspect of underground and open cast mining operation.
Mechanical fitter, Snr SHE Officer & Mining Eng 2nd year Honours Degree at Leeds University
Objective I am looking for an environment that provides a challenge and growth opportunities. My ideal company would utilize my 15 years of experience in all aspects of the mining industry.
Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra
With a proven record of exemplary senior management, and delivering efficient and productive operations strategies within corporate environments, I am seeking to utilize my comprehensive experience with an innovative and high growth company.
Drilling specialist and Mech. diesel fitter
Experienced Civil / Structural Engineer
CNC programming, unigraphics NX4/5, Catia V5, Autocad
MAINTENENCES MANAGEMENT OF HEAVY EARTH MOVING AND CONSTRUTION EQUIPMENT
I do not have any experience. I want to make mining my career. I am very hard working, and want to mine until I retire. The only relative experience that I have is construction. I worked construction in Las Vegas for one summer.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   [ 25 ]   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com