Resume - to obtaian a job

Misco Jobs

Resume #81084

CONTACT INFORMATION:
View contact information...

Objective

To obtain a job with your company
Work History
Crane Field Technician
Konecranes Inc, Tulsa, OK 2008 - Present
Maintain cranes at customer facilities, pm's cranes and installs of new cranes. Disassemble machinery and equipment to remove parts and make repairs. Repair and replace broken or malfunctioning components of machinery and equipment. Repair and maintain the operating condition of industrial production and processing machinery and equipment. Examine parts for defects such as breakage and excessive wear. Reassemble equipment after completion of inspections, testing, or repairs. Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices. Operate newly repaired machinery and equipment to verify the adequacy of repairs. Clean, lubricate, and adjust parts, equipment, and machinery. Analyze test results, machine error messages, and information obtained from operators in order to diagnose equipment problems. Record repairs and maintenance performed. Study blueprints and manufacturers' manuals to determine correct installation and operation of machinery. Record parts and materials used, and order or requisition new parts and materials as necessary. Cut and weld metal to repair broken metal parts, fabricate new parts, and assemble new equipment. Demonstrate equipment functions and features to machine operators. Enter codes and instructions to program computer-controlled machinery.

Maintenance Technician
Underwood Truck Repair, Pryor, OK 2006 - 2007
Adjusts working parts, such as fan belt tension, voltage output, contacts and springs, using hand tools, and verifies corrections, using gauges.
Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic drawings, using hand, machine, and power tools.

Platoon SGT
Thunderbird Youth Academy, Pryor, OK 2004 - 2006
Supervise Cadets attending the thunderbird training program. Supervise 25
male cadets and 6 female cadets. I followed the Bravo SOP and work well with other cadre on my shift and all other shifts, I report to the Shift supervisor and enforce the rules and regulations and keep total control at all times.

Maintenance Electrical Journeyman
Orchids paper products, Pryor, OK 2001 - 2004
Maintain winders, wrappers. Motor controls, Variable speed Drives, Voltage 460 &
below, set up machines, maintain electrical services for all equipment.
Installation of new equipment and maintain it. Adjusts working parts. Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic.

Heavy Machinery Mechanic
Oklahoma army national guard, Pryor, OK 1992 - 2001
Maintain military equipment and vehicles. Adjusts working parts, such as fan belt tension, using hand tools, and verifies corrections, Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic drawings, using hand, machine, and power tools.
Disassembles defective unit, using hand tools..

Education
Pryor High School - Diploma
Orchids electrical classes, Oklahoma state university
Electrical and electronics degree

Certificates & Licenses
US Army -Heavy duty machinery mechanic (62B) Army -
Plumber/ pipe fitter (52K) Army - Combat lifesaver (92B)

Driver's License
Type: Commercial, Class A
Endorsement: Passenger
Restrictions: Air Brakes, School Bus

Volunteer Experience
I love to volunteer for my kids sporting events; I have coached soccer, baseball & football.

Military Service
Oklahoma National Guard August 1992 to Aug 2001. - Honorable Discharge.
Specialist first class - heavy Equipment mechanic.
Commendations: Merit Awards and Unit Awards.

References
References provided upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 3493)

Go to Search Parameters...

Brief Description

RED SEAL certificate and CVIP endorsement HEAVY DUTY MECHANIC

I have only been in the mining industry for 8 months. However I love it. It is very similar to construction which I have been for several years.

Accomplished multilingual Metallurgical Engineer with significant experience in HPAL plant and commissioning

CAD CAM PLM TECHNICAL SUPPORT

MBA in management and finance BS in geology 4 years field experience in rotary and core sampling, geological mapping and AUTOCAD 2 years experience in budgeting, and business development

Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)

Versatile, applied and highly motivated geologist with 3 years of experience in ore control, resource evaluation, geologic mapping and near mine exploration. Offers excellent communication and computer skills. Seeking a geologist position where efficient, dependable performance is required.

Ore Handling Plant Superintendent (Alternate Project Manager); Electrical Maintenance

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

Mechanical Draughtsman with expirience in Automobile industry (Engine Design)

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

DCS/ SCADA specialist

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Over 4 years experience in mining; excellent project management, report writing, schedulling, planning and prioritising skills; capacity for implementing, managing and maintaining environmental management systems (ISO 14001) including internal auditing; great commmunicator and trainer.

20 Years experience within Surface Coal Mining - Proven competence in mine management. (NVQ Level 4) - Control of blasting operations (Explosive Supervisor) - Mine Planning and design - Twelve years experience as mine engineer - HNC Civil Engineering

Bio-Medical Engineering, B.E.S., M.Sc., (Bio-Medical)

Mechanical Engineer

Bachelor in mining engineering +1 year experiense

Electrician who posseses a wide variety of electrical knowledge

Competent and adept geologist with mine planning experience

Belts 6 months, roof bolter 2 yrs.,

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Interdisciplinary exposure to sciences and arts: Engineering-Business-IT-environmental (which is a very rare profile). Highly developed set of skills: Coordination skills, Pedagogic skills, and Critical evaluation skills

Mining engineer

I can operate a scoop and a pinner

Conveyer belt: Maintaining of chutes, Transfer chutes, Box fronts, Radial doors, Hydraulic Cylinders on radial doors. Setting belt alignment. Maintenance on idlers (rollers) head pullies, Tail end pullies.

Administration and Management.

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Group Leader for three years, responsibility of children, 0-5years and a staff member under my direction.

Graduated Diploma in Business Administration of Informatics group. Can speak English well

P.E. Electrical with 20+ vears, Specilize in power distribution and electrical maintenance for mining and heavy industrial equipment

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

resume jul09

I am a graduate mining engineer and I held my degree in Turkey. Currently I live in Sydney and I just have completed the degree of Master of Business and Commerce. I did operations management and project management units for my master degree. I am willing to locate and work in mining sites

Previous experience from education and industry have shown my main qualities to be concerned with time and data management which allows for consistent work that meets required deadlines. Other skills include good communication, presentation and team participation.

I am a fresh geologist from Belgium. I am looking for an interesting and challenging career in mining exploration. Fields of interest : Petrology, Geochemistry, Metallogeny, Sedimentology, Structural Geology, Geophysics and mining. From my studies, I also got rigour, autonomous, and dynamism

I am a post graduate in Production engineering with over 18 years of experience in heavy earth moving equipment and auto vehicles

Project, Project manager, maintenance, maintenance manager, production, production manager, mining, heavy equipment

Controls Engineer, ControlLogix, Manufacturing Engineer, Engineering Manager, PLC Programming, Robotics, Machine Vision

Fleet Manager/Safety Officer 15 years experience. Certified Journeyman Heavy Duty Repairmen/Welder 22 years experience.

Front line supervisor, to train the trainer, mine development jumbo lead hand, OH@S,first aid certificate

Environmental Management & Permitting/Mining - Oil & Gas - Power - Infrastructure - Construction/Domestic (USA) & International

Ventilation : Primary and Auxiliary. AutoCAD, Vulcan 3D, VNetPC, Microsoft Excel

Shotcrete and high pressure water Scaler operator. Lead shotcrete sprayer trainer, extended services, loading rounds, equipment set up and troubleshooting. Boom truck operator, Loading rounds, Shotcrete, Vent pipe installation, Jackleg operator. Forklift operator.

3 years of experience in AUTOMOTIVE Field, CATIAV5, Reverse engineering

To secure a challenging job in a firm where I can implement my Engineering, Analytical & Diplomatic skills and thereby enhance the goal of the company.

§ Design and installation, repairs, overhauls, modifications and upgrades of all production and support equipment.§ Implementing maintenance excellence programs such as, maintenance planning, condition monitoring systems, safety, reliability and efficiency systems.§ Specification and contracting out

Maintenance Manager with BSEE degree & current MSHA electrical cards with hands-on experience in all aspects of mechanical, electrical, and hydraulic systems.

to obtaian a job

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out