Resume - Bachelor in Engineering - Metallurgical Engineering.

Misco Jobs

Resume #81421

CONTACT INFORMATION:
View contact information...

Objective:
To obtain a position in the Engineering Service Industry, where I can utilize my previous work experience and expertise to advance in to upper level management.

Education:
Degree: Bachelor of Engineering (B.E.)
Branch: Metallurgy
College: Faculty Of Technology & Engineering
University: Maharaja Sayajirao University, Vadodara, Gujarat, India.

Work Experience:

Name of the company: Elecon Engineering Company Limited,
Location: Vallabh Vidyanagar, State: Gujarat, Country: India.
Company is engaged in Heavy Engineering Equipment Manufacturing i.e. Material Handling Equipments like stacker reclaimer, loader – unloader, long material conveying systems and Industrial Power Reduction Gear Boxes.

Positions & Working duration:

Senior Manager:
2004 Onwards.
Along with above responsibilities added responsibilities given were over all In-charge of Heat Treatment Shop, Metallurgical Quality Control & Material Testing Laboratory i.e. Metallography, Mechanical testing of Metallic material & Chemical analysis of Metallic Material.
Deputed as Coordinator to Management Representative for ISO 9001 implementation and Maintenance in the entire organization. Document preparation and implementation at all stages.
Deputed as Technical Manager & Quality Manager to implement & maintain the accreditation of Material Testing Laboratory according to ISO / IEC 17025. Document preparation, authorization, distribution & implementation within the laboratory.
Vendor development, educating them for QMS & TQM etc.

Manager:
1998 to 2004.
Along with above said responsibilities the added responsibilities for Quality Control at Inward stage, Process stage and final stage added for Metallurgical and Dimensional. Here also take care of Hardness & Dimension measuring instruments and metallurgical microscope with image analyzer. Process improvement, validation etc. to achieve & fulfill customer requirement. Write down the SOP and implement in the routine work..

Deputy Manager:
1988 to 1998.
During this period along with above said responsibilities worked for process improvement and establishment. Here I have change the process parameters, accessories etc. to achieve consistent quality with minimum cost & rejection or rework. This effort produces effective process cost reduction to the 30% i.e. saving in electricity and consumables and reduction in process cycle time i.e. productivity increased by 12%. Process improvement with process cost reduction.

Technical Executive:
1984 to 1988.
During this period along with Junior Engineer responsibilities worked for fixture selection (here I have recommend to change the material of fixture from Mild steel to Heat Resisting steel) which gave maximum utilization, improved output, improved life of fixture, minimum distortion, reduction in process cost and reduction in rejection cost etc. Planning & Production responsibilities.

Junior Engineer:
1980 to 1984.
During this period I have to look after the day to day working of Heat Treatment shop. Maintaining and updating log book with day to day working. Supervising the workmen and routine work and controlling various processes like Carburising, Hardening, Tempering, Annealing, Isothermal Annealing Pearlitizing, Normalizing, Stress Relieving etc. Here worked in all the three shifts.

Technical Apprentice:
1979 to 1980.
During this period I have been trained to work on shop floor in Heat Treatment shop.

Additional Responsibilities:

Assisting / helping / guiding in vendor development for bought out items for the organization.

Educating, developing and helping in upgrading the subcontractors to comply with the specified requirements.

Helping for establish TQM / QMS at vendor end.

Assisting / guiding Design & Development Department for selection of material & heat treatment according to the application.

Carry out metallurgical failure investigations and suggest remedies / changes in process sequence / material condition etc. to relevant department.

Maintaining all relevant documents for process, quality records and all test data in a proper manner that can be retrieve by all relevant easily as and when required.

Initiating budget proposals for testing equipments and other resources according to expansion plan, modernization, testing reliability improvement and effectiveness.

Managing fabrication of steel to steel, steel to alloy steel, steel / cast iron to non ferrous, steel to stainless steel.
Preparing, implementing & maintaining WPS, WPQ & PQR for various welding processes according to ASME SEC IX.

Personal: Marital status: Married
Children: One daughter & one son
US residential status: Green card holder, can work for any employer in United States.

References:

* Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 3489)

Go to Search Parameters...

Brief Description

20 years overseas contracting, Mining and Construction

Geologist at well site oredo 10 and 11 (Drilling rig)

team player, I can work safely even with minimal supervision. proficient in in underground and surface drilling.during my last employment i was awarded with safety performance recognation.

I am a highly skilled geologist looking to increase my responsibilities and take on new challenges. By experiencing different working environments from the Australian Gold fields to the African Copper belt, it has enabled me to develop as a rounded geologist that can contribute to your team.

HR Administration / Recruitment / Orientation

Mining engineer with hands on supervisory experience in mining development and production. He has worked internationally and is currently a mine planning engineer at Rosebery Mine, Tasmania. 34, married and has two children of 2 years and 6 months old. Fluent in Russian and English.

Self motivated mining engineer with experience in remote northern locations in Canada and Alaska. Experience includes mine operations and reclamation, short and long range planning, geotechnical design, and permafrost design.

30 years in tough Engineering & Construction Industries

Mining experience 20 yrs. Leader in all facets of underground mining,stope drift and timber leader. Jumbo jackleg stoper, heavy equipment truck to 40 ton tamroc jumbo, common core, Ontario mining certificate, various safty certificates, mine rescue certificate.

Experienced Cad Manager/Project Coordinator. Multi Discipline design teams. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProCadam. Engineering background - Structural/Civil.

DOCUMENT CONTROL MANAGER Successful, motivated, qualified with over 25 years extensive experience, covered all levels of data and admin management pro-active hands-on team member / leader. Experienced in all levels of computerised & manual document control.

Presently have 32 years of sawmill and planner mill experience Operated all heavy equipment involved with lumber operation Safe work habits witch are indicated by 1 incident in 32 years Excellent mechanical knowledge

31 years experience (10 years international) in project and contract management of large scale industrial projects in the oil & gas (onshore & offshore), alumina, petroleum, brewing, iron ore, nickel, gold and general mining industries.

20+ years in Mining/Smelting/Construction Industry. Gold, Nickel, Industrial Minerals (ilmenite, garnet). Exstensive international experience for large companys. Contact Tel +47 917 09 554 email brian_ballou@yahoo.com

Interrested in rotational international opportunities in Maintenance Management or Senior Maintenance Planning positions

A dedicated, committed individual who is both practical and adaptable positive and versatile a self-starter with an ability to motivate individuals to achieve results a team player.Years of experience in the industry, wanting owrk overseas. flexible and reliable

Worked ten years in underground coal mine for Peabody coal compny. Was certified electrician from 1974-1984. Worked as a foreman and assistant mine manager.

8 yrs exp coal mining; exp in SAP PP, TOC SCM, DuPont Safety; OHSAS

Involved in exploration for precious metals in Archaean and Proterozoic terrains of India, includes Gold, PGE, Ni and basemetals

Free! Well Rounded Mine geologist with experience in Alluvial Diamond Mining and Gold Mining and Exploration

I am a Pro-Engineer Designer with experience up to Wildfire 3.0, Pdmlink 8.0 & 9.0, SAP, and Intralink 3.4.

I am Civil / Structural Engineer with 25 years of experience. Presenly I am working as a Lead Engineer for last 10 years. I work as a hands-on lead and comfortable with checking of calculations, doing schematic design and providing site support.

Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.

Erection, Commissioning & Trouble shooting of Rotary Kilns, Ball Mills, Vertical Roller Mills and Electrostatic Precipitators.

Professional Geologist with more than 3 years experience in Porphyry Copper-Gold/High-Sulphidation Epithermal Copper-Gold and Epithermal Gold-Base Metal Projects and Prospects in areas of South Cotabato, Surigao del Sur, Davao Oriental and Agusan del Sur, Mindanao; and Negros Oriental, Central Cebu

Metallurgist with 4 years experience in base metals. Graduated with a Bachelor's Degree in Mineral Process Engineering 1st Class Honors. Enthusiastic and works well in a team or independently

MSHA Qualified Electrician, Part 77.103 since 1993/ Instrumentation/ HVAC

Mining Engineer

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

Having 14 years of work experience in Ship Building/Repair, Petroleum and Mining industry in both Philippines and Dubai (UAE).Worked as Insulator, Tinsmith, Pipe fitter, Fabricator and CAD Operator for mechanical and structural works. Used AutoCad Software as drafting tool.

Diploma in mine survey from the Zimbabwe school of mines. All round surveyor capable of all underground surveys plotting and reports; all surface surveys including all setting out, pit surveys and volume calculations, road surveys,cut and fill calculations using total stations, GPS & automatic level

Accumulated almost 10 years working experience in Apo Cement Corporation, Cemex, Philippines. Directly involves in operation, inspection, maintenance and commissioning of the following Krupp Polysius AG manufactured equipment: 2 units 170 tons/hour cement grinding tube mill, 2 unit 300 tons/hour VRM

Experienced Mech. CAD designer utilizing ProE, Solidworks,Autocad and assoc. PDM packages to work on electromechanical projects for companies in the medical, power generation, textile manufacturing, communication, consumer product, industrial and aerospace industries.

Experienced Plant Manager: Was born into the Aggregate Business and have worked for more than 20 years in a large variety of positions within the aggregate industry with a record of successful cost reduction and increased production in operations.

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Mechanical fitter, heavy engineering, worked all over africa, currently in mali, knowledge of hydraulics and pneumatics, work on winders mills etc laser alignment

Years of exp. in the Western U.S. and South America. Exploration trough production with the big five surface and underground operations. Understands South America.

With 20 years experience in fire, rescue and emergency response, I hold instructor qualification in the areas of high angle, aviation, confined space, trench rescue and well as fire fighting. I am at present completing a post graduate diploma in WH&S run by CQ Uni, Australia.

A confident organised individual who is methodical in his approach to completing tasks, Can either work as a self – reliant individual or as part of a team.

Mine/Mill Maintenance Supervisor OBJECTIVE: A position in the mining industry, where ever I can be useful as a Mine/Mill production / process manager, Supervisor, Maintenance Technician

I have spent 23 years in the extractive and minerals processing industries.

Supervisor - SAFE Underground Mining/Training - Production/Development and Construction. Atlas-Copco, Boart-Longyear, Wagner, Caterpillar, etc. 20+ years in Underground Gold, Silver, Lead and Zinc.

Exploration Geologit experience in Gold, Base metal Experience

Facilitator for maintenance departments. Business Process mapping, maintenance performance assessment, Installed and directed a successful planned maintenance system that has improved equipment availability and significantly decreased direct operation cost. Meeting federal and state environmental re

Heavy Duty Mechanic

I am 42 years old and Master Degree, currently I am still working for Valeinco as Logistic Manager and I ahave many experiences in Project Management such as Contract Services Manager, Project Manager and Project Coordinator and with my experiences I am confidence to be one of your candidate/staff.

20 years of HR experience in recruitment, remuneration, pay structure development, performance management, job evaluation, benefits, organizational design, employee relations, database management, leadership, management, facilitation, coordination

Bachelor in Engineering - Metallurgical Engineering.

I got experienced as Mine Engiineer, Cost Control and Mine Planning

Welder needs work

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out