Resume - Surface Mining Skills

Misco Jobs

Resume #82665

CONTACT INFORMATION:
View contact information...

May 11, 2009

Greeting: To whom it may concern

I am writing to inquire about openings available within your company.

I have a long and successful work history in construction and mining operations.

Operate and maintain the latest state of the art technology and equipment.

Participate in personnel training.

My experience and skills would make me a valuable asset to a company that wishes to employ me. Enclosed is a resume for your review.

I look forward to having the opportunity to meet with you and discuss how my skills could be of benefit to your company.

Profile

Able to handle challenges, with proven history of increased productivity.

Achievements
* Current on MSHA Surface Mining Certification. Operate two styles of haul pak 830E, T282B, Signed off in 2006.Operate three styles of water truck, Komatsu HD1500-5, Cat 789, 777-C. Operate a RTD854G.

* Learned how to operate a scraper properly.

Experience
Mining Operator
2006-2009 Heavy Equipment Operator, Barrick/Cortez.
On the RTD854G I learned how to properly and safely maintain a dump and the right height berm that is required by MSHA. Cut and fill to maintain grade with and with out a GPS system in the machine. Learned how too properly and safely clean up around two different sized shovels and maintain a level ground while doing it. Aggressively maintain a safe working environment to include good housekeeping practices of assigned work area and complies with all applicable environmental, health and safety policies.

Construction
2004-2005 Operator, Jackson Trucking.
Use a Scraper to cut, fill areas for a road way and cut out a man made lake. Cut, fill and compact areas for a railway to cleared and certified by the state of Idaho. Operate a forklift to load flatbed trailers with one-ton bails of hay. Was training in a Kenworth with triples on it to get experience so I could get my CDL. Use a track hoe with an auger on it to clean out railcars with meal mix it them.

Education
1997 GED.
Sumner High School
2003-2004 IT Certified
BCTI

Honors & Achievements
Cortez Gold Mines
Present First Responder 2007- Continues
The Crescent Valley Fire Dept.
Present Crescent Valley Volunteer Firefighter 2007- Continues

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 3493)

Go to Search Parameters...

Brief Description

Qualification: B.E (Mining Engineering)

Experienced Project Manager/Engineer

Diploma in Mining Engg, AMIE Sec A&B in Mining Engg from IEI.

Over ten-years of progressive experience and responsibility in the areas of Heavy Equipment Operation & Landscaping at various organizational levels

Junior geologist with keen interest in exploration geology, especially in field work.

Responsibilities include the organisation and planning of all engineering work to be carried out on a daily basis also planned shutdowns, within the Milling and Crushing circuits.

Client Manager/Administration

Mine Manager, diamond mine. Work in Angola for 6 years, Excellent knowledge of Pans, DMS, Xray machines, Screens, Crushers, Flotation (Zn, Pb, Cu,Platinum), Spirals, Nelson concentrators, Spreak/read/write English, Afrikaans, Fanakalo,Portuguese

I am an experienced professional with excellent communication and interpersonal skills, persuasive ability and sound understanding of business conceptsand issues related to Business Administration, Sales, Marketing and General Administration;

Experience, professionalism, skills, physically fit, able to work long hours in tough environment and stressful conditions, availability for traveling abroad.

Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.

I am a geologist looking for a new challenge outside the borders of South Africa. I have experience in exploration and mining geology. My mining background is opencast and underground. I am currently doing my masters degree on roof stabillity problems in underground coal mines.

Procurement, Supply Chain and Contracts Professional

Construction Management professional with Heavy Industry ,Power, Energy, Mining sector experience

Have HAZ.COM Cert., First Aide, CPR, AED

Holder of a Mining Engineering degree who is well knowledgeable in aspects of development, production, shaft operations, budgeting and cost control, mine planning and scheduling and ground control management practices coupled with an outstanding safety record and excellent leadership skills.

I am post graduate in Geology from Pune University in 2003 worked as a Lecturer on clock hour basis at Rajaram college , Kolhapur. and searching for a job in mining.

I am actively seeking a position in the mining industry where I can utilize my pedigree education from Colorado School of Mines and get back to studying and working in the field that I am most educated and best suited for. I have 3 years experience as a lead engineer.

I am looking for an entry level Geologist position starting in the near future. I have been attending Simon Fraser University for 5 yearsand recently completed a Bachelors of Science. I've worked in mineral exploration for the past two summers in northern BC

Allround Operator with over 10years experience in open-cut mining. very interested in working overseas.

LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT

Senior mining professional with global risk management experience identifying and managing risk in mining operations and related construction projects

12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :

10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

I am a geologist with multidisciplinary experience, including experience in geotechnical engineering, mining, exploration, tunneling, groundwater, drilling, environmental and construction monitoring. I am a licensed monitor well driller in Nevada and OSHA Hazwoper, MSHA, SWPPP and nuclear gauge cert

Heavy Equipment Mechanic. I Have experience on a wide range of equipment from mining to construction. Experience rebuilding engines, hydrauilic and drivetrain components. Welding and fabrication skills. John Deere and Hitachi factory certified. Hard working and self motivated individual.

Land surveying relating to boundaries, design, construction, and mapping.

Jouryneyman Millwright - Alignment Specialist - Lazer, Reverse and Rim& Face. I have installed and rebuilt steam and gas turbines, crushers,conveyors, ball and sag mills, tower mills, pumps, compressors, blowers.

Motivated, proven performer with a 17 year record of demonstrated success in Operations Management, Project Management, Distribution/Logistics Management, and Mechanical Engineering across multiple fields from Military Operations, Municipal Management, Telecommunications, Software Development, Call

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

Certified welder and EMT. Experienced Highwall miner operator and equipment operator with a West Virginia Black Hat surface card

Professional Sales Person with a sound Technical background. “Hands On” approach. A proven track record of strategic business planning, financial & corporate leadership experience conceptualizing ideas, seizing opportunities, building operations, leading highly successful new business development in

A metallurgy n materials engineer with 3.5 years of experience in the field of Metallurgy, QA, Heat Treatment and Inspection & Testing. Worked with various international standards viz. ASTM, ASME, NACE, EN ISO and DIN, also well versed with customer specific standards like Aramco, Shell MESC etc.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Diploma Engineer in MINING with more than 7 yrs of experience OBJECTIVE: To be coherent in to Mining Engineer / Mining Foreman to develop my work in string to Enhance and mettle my experience towards the company growth.

Im looking for mechanical maintenance Engineer position/maintenance planner.

I inspect equiptment for faults & malfunctions,determine repairs required,do the repairs required and test them.

Protection Services Manager and acting Health and Safety Manager Barrick Platinum SA

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

I am HSE professional having work experience of chemical industry and drilling , my education level is masters also completd courageous leadership course in health and safety,management of change, IOSH managing safely,ISO internal audit course,OSHA 18001 internal audit course.

MATERIALS CONTROLLER / SENIOR STORE KEEPER

I have worked in the mines for about 3 years and became papered in IL. I ran roof bolters for most of the time i was there and prefer that position if available, i ran scoops, coal haulers, worked outby, shoveled belt lines and done power moves. I am a very hard worker and i don't miss work.

High-energy administrative, dependable professional with good judgment and wisdom. Excellent knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, HR information systems, human resources modeling, leadership technique,

Surface Mining Skills

Can operate a pinner, scoop, and work the belts

I am a dedicated and hardworking Materials Coordinator / Controller with an excess of 10 years experience in oil and gas industry.

15+ years in the industrial field. Underground Apprentice certification card.

Enviromental Geological Engineer and Regulatory Affairs Manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out