Resume - I have 25 years experience operating all types of heavy equipment used in mining...

Misco Jobs

Resume #82749

CONTACT INFORMATION:
View contact information...

Position of Equipment Operator or Foreman

PERSONAL:
Capable of supervising, managing and motivating workers
Ability to handle multiple projects
Experience in unique civil projects
Highly motivated and self starter.
Willing to learn new ideas

EXPERIENCE:
Triple Transfer Driver 2007-current
AB Construction, Doyle, Ca
Delivering aggregate material to clients in Western Nevada. Took position due to lack of work in the Reno area for construction.

Mass Excavation Foreman, 2005-2007
Atlas Contractors, Inc. Sparks, Nv
Constructed subdivisions and commercial sites. Onsite supervisor. Usually supervised 3-20 employees depending on project needs. Estimated production schedules for mass excavation for dozer/scraper operations. I did rough and finish grading for house and building pads, streets, sidewalk, curbs and slopes. Set grades for slopes, swales, streets, channels, curb and gutters, and sidewalks. Operated finish blade majority of the time as a working foreman. Operated all other machines when needed. Instructed toolbox safety meetings daily, and major issue safety meetings on Thursdays. Worked closely with Grading Superintendent, Underground Utility Superintendent and Foremans, Paving Superintendents and Foremans, Project Owners, and government inspectors, to insure all aspects of the project were on track and on time.
Operator/Laborer Foreman 2004-2005
The Ryan Company, Tauton, Mass.
Worked on a new waste water treatment plant as a backhoe operator. Promoted to Operator/Laborer foreman by Structures Superintendent. Led excavations on all buildings and piping within the new Sewer Treatment Plant. Very enviromentally sensitive area of San Luis Obispo, Ca. I spent 8 months there, but talks of possible company closure by parent company Quanta, made me decide to return to Reno.

Grading Foreman-2002-2004
Peavine Construction
Worked only in the private sector on one very large master planned community and one storage facility. Supervised 5-15 operators. Used Trimble GPS to set up most of the subdivisions, used GPS and lasers to finish lots, handheld and machine controlled. Most decisions were made by Grading Superintendent, I just followed instructions.

Mass Excavation Foreman, 2000-2002
CBK, Inc. Las Vegas, Nv
Was a full charge foreman. I managed up to eight projects at one time. Setting up project, lay-out, organizing crew, ordering machines, and all paper work.We did private work such as subdivisions and commercial projects, and high rise ground work excavations. In the public sector were various new schools and additions to two college campuses. Little to no supervision from Superintendent, or company owner. Spent time in the field, as well as in the office. Internal problems caused to company to close its' doors.

From 1997-2002 I worked for various union shop companies mostly in the Las Vegas area. Some as a foreman others as an operator. I spent four months in 1997 on a flood project in Walker Canyon, Walker California. Excavating 10 feet below river bottom, and building new river path, that was destroyed by the flood, installing various size rip rap. I have experience working on airport projects grading, installing new lighting (piping only), with swales, and numerous grade breaks, using laser and GPS, to lay base with a paver for a tarmac, and finish grading it with the TopCon 3D Macine Control laser system to grade within -.02 of finish product..

EQUIPMENT EXPERIENCE
DOZERS- All Cat D3-D-11R, Komatsu,. John Deere, Dresser, Fiat Allis
LOADERS- All types and sizes to Cat 990, John Deere, Kawasaki, Komatsu; grading, backfiliing, loadiing trucks.
BLADES- Cat 12-16H, John Deere 772, Volvo, Dresser
EXCAVATORS- Cat 301.5 to 385L, John Deere to 850, Komatsu to 95z to 450, Hitachi 220 to 1800 with 9 yd bucket loading 777 haul trucks
OTHERS- Rubber-tired backhoes, compactors large and small, rollers static and vibratory, scapers; paddle-wheels, conventional and twin engine.
I have 25 years of experience in civil construction. I have worked on major highways, steep terrain, tight access, commercial, heavy industrial and residential projects, both public and private sector. Like to be faced with challenges. I know how to move dirt, and take moving it seriously. I can read and interpret plans, and can set grade. I have no tolerance for sloppy work. I am both old and new school able.

EDUCATION:
Lee Vining High School
Lee Vining Ca.
Graduated in 1983 and began my construction career
I do have experience with Trimble and TopCon GPS handheld and on machines, and TopCon 3DMC system.

ABOUT ME
I was born and raised in Lee Vining Cal. Left in 1983 to pursue a career in construction.
I am married with five children and two step children. Grandpa of two. Three of the five are out on their own.. I am no longer affiliated with any union. I am currently driving a triple transfer dump truck for a friend since construction is slow here in Reno. I believe that being punctual, getting to work is priority, and safety is mandatory at all times. I have a great work ethic. I like to be prompt, and expect others I work with to be. I do not use any form of illegal drugs, nor do I ever come to work hungover or drunk, and when in a supervisory position, I send those home that do. I adhere to company policy and safety regulations. I take these very seriously. I am willing to travel as the projects change.

ADDITIONAL INFORMATION

I have nearly 25 years of experience in grading and underground utility construction. I have operated all sizes of excavators from mini's to an Hitachi 1800. Loaders of all sizes. Dozers D3 to D11R. Cat, John Deere, and Volvo blades. Most brands of rubber-tired backhoes. Scrapers; paddlewheel, conventional and twins. Multi-terrain and skid steer tractors. I have worked on house pads to super arterials, city streets, commercial sites, industrial power plants, water and waste water treatment plants, bridges and specialty jobs. I can read and interpret plans, and set grade. I have installed water lines, class 150 and C900, and ductile to 48 inch. Sewer to 60 inch, and storm drain from 8 inch plastic to 144 inch multi plate culvert, and 10' x10' triple box, pour in place and pre-cast concrete. I have finished slopes with dozers, blades and excavators. I have ran excavator/haul truck operations, and worked with drilling/blasting operations. I also have experience in sand and gravel/crushing operations.
I have 10 years experience of being a supervisor, and expect attention to detail. I have worked numerous types of project applications and used many different styles to complete a task. I am willing to travel if project calls for it. I consider myself an expert in this field.
This is only a basic overview of my experience in this field. I have tried not to limit myself in all aspects of heavy construction. If you need more information or have any questions please call.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 3489)

Go to Search Parameters...

Brief Description

Process Engineer Graduated with a First Class from the University of Leeds 3-4 years experience of production, technical, commissioning and project management

Production Drilling and Blasting. Over 20 years experience in production mining, open cut and underground, Aust and Africa

Engineer with practical business, design and management experience in the areas of Civil and Geotechnical Engineering. Educated professional, committed to continuous improvement, ethics, teamwork and quality service. Detail oriented, excellent communicator, and capable of managing multiple projects

I am having more than 16 years experience in secretarial field, out of which 8 years in U.A.E. only.

Mineral Processing Engineer(16 yrs exp.)10 yrs as mill sup't in Cu,Zn,Au,Ag operations. Personnal traits: team leader, flexible, resourceful, team-oriented, good communicator. Skills: technical & managerial aspects of planning, operation, projects, budget, processes, training, HSE

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

To obtain Position in Project Management or Project Engineering in an International Environment

5+ years underground mining. Got most tickets. JUMBO/BOGGER/SHOVEL/SHOT FIRERS/TRUCK

PROJECT GEOLOGIST with 19 years experience in Environmental Consulting including soil and groundwater investigations and site remediation, and Oil and Gas Exploration.

I am a self motivated and ambitious Tanzanian holding a Bachelar of Science Degree in mining engineering who can work under pressure. I have got the basic skills in computer and user of Vulcan software.

I am very keen to work outdoors and have a great love of the West Australian outback. Therefore I am keen to work as a Haul Truck Driver and progress from there.

To be a part of organization which enables me to cope-up with emerging as well as the latest trends and provide me scope for widening the spectrum of my knowledge.

Over 6+ years experience in Content Management. Professional Proofreading, Editing, Writing, Documentation using various editing tools as Framemaker, Latex, MS-Word.

LSIT, US Citizen, Willing to relocate

A highly qualified Materials Engineering Graduate, with extensive technical, inter-personal, analytical, and troubleshooting skills, seeks a challenging and exciting engineering position

15+ years of heavy equipment experience on all sizes and pieces of equipment

Twenty+ years of Materials and Procurement Management experience including supervision and management of warehouse contractors, material control, procurement activities including vendor sourcing, requisitioning, procurement and expediting, warehousing including receiving and issuing.

Repair, replace parts, maintain equipment.

My major responsibilities are Core Photography, Core Slabbing ,Core reservation and Storage Services ,Lithology rock description ,Real time monitoring of drilling parameters, preparation of formation evaluation logs, identification and classification of samples

I have 25 years experience operating all types of heavy equipment used in mining, mass excavation construction, fine grading, and underground utililities.

I am a diesel mechanic by trade in the mining and constuction industry. I have 13 years experiance in repairs field service and setting up and running full on maintenance worshops. I am a hands on person getting involve in anything to get the job done properly.

A mining engg from indian school of mines, currently I am working in NMDC an iron ore company, I am in charge of operation and safety aspects in the comapny,

Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)

I have grew up around farm equipment and heavy equipment all of my life. I have worked on many pieces of heavy equipment and wish to pursue a career as a heavy equipment technician

Demonstrated expertise in the life cycle of software development. Proven success track in managing people, resources and processes within a worldwide organization while effectively building internal and external relationships. Have a credible track record in resolving customer-related issues

I have 10 months roof bolting experience, I also have opertated a Joy Miner, Scoop, Joy and Stamler Coal Haulers. I also have a certificate in Welding. I have a total of 1 year and 3 months of underground experiance.

I headed the Paloncha coal project and Jangareddygudem coal projects as Project Manager and monitored the Exploration activities of the projects and successfully and achieved the stipulated targets (Oct 2006 to 10th July 2008)

I am a Materials and Process Metallurgist,, and a Plant Metallurgist ,who have seven years experience in both gold and materials processing in Ghana.

Has the experience and skills required to manage, supervise, handle and monitor all job related aspects of Safety, Health and Environmental protection. Capable and knowledgeable in the process, development and application of different Safety measures that are vital in Offshore & Marine Safety,

Through my drilling experience with companies like Boart Longyear, Redcor drilling, SMD and Humboldt drilling and pump I have gained experience and knowledge in multiple types of drilling including RC (5.25” to 17” bits), Percussive (including directional), DTH and Wire line Coring

SAP, AutoCAD, Pro-E, ANSYS, ARENA, FMEA, DOE, Kaizen, Kanban, 5S, Six Sigma, MS-Office

Coal miner with 11 years experience

Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;

I have thirty eight (38) years in the oil and gas industry as a Landman. During my career I have worked in over thirty (30) states here in the United States. At this point in my career I would consider myself a "Senior Landman."

One year and nine months of domestic mining experience, in a open cut, shovel/truck coal operation. Experience include, long term planning, road design, dump design, Pit design, scheduling, cost estimate, pit production supervisor of Shovel P&H and O&K fleet.

Mining Engineer, Programmer, Mineral Project Evaluation, CTL and GTL Technologies

Have a broad knowledge of maintenance practices and theory in addition to a Bachelor's degree in Industrial Management and a strong desire to work in the mining industry.

I am a fully qualified automotive electrical and mechanical engineer, i have been a light vehicle mechanic for over 16 years and i would like to broaden my horizons and work overseas, i am prepared to travel any where in the world i have extensive knowledge of diesel engines, automatic transmissions

I like new challenge and gain valuable new experience to develop my skill become a potential engineer. I am very familiar to operates computer and applies field equipments. I am a hard working person and be able to work under pressure as a team or individual, a dynamic, self-motivated, have

Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Hand Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)

I would like to use the training I have acquired to become more familiar with the operation and components of operating heavy equipment, and to obtain a position in the construction industry as a certified entry level Heavy Equipment Operator.

I am very noligable in underground mining and equipment

Long Hole Diamond Core Driller

Underground mechanic and miner

Free! IT Manager with 20 years of experience in IT with 8 years of that being in a supervisory and management capacity. I have broad and varied experience in both the technical and management areas of IT.

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

A highly experienced Human Resources Practitioner with a comprehensive and strategic understanding of HRM, business and operational issues and organisational change. Able to devise and implement coherent HR strategies whilst improving internal processes and procedures within demanding environments,

8 years of experience in Mill Wright Maintenance in heavy process industries Worked in Heavy Engineering Establishments. Experience in handling Breakdown and Preventive Maintenance Work of Machine Tools. Hydraulic and Pneumatic Problems.

Mig & Stick Welder

26 years ; Contract Admin/Manager----Procurement

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out