Resume - worked in the Middle east on Power plants for 2 and a half years, stat generator...

Misco Jobs

Resume #83390

CONTACT INFORMATION:
View contact information...

KEY QUALIFICATIONS:

a qualified electrician and Diesel Engineer, with many completed courses and a Diploma has many years experience in power supply units, Diesel Engines, wiring of
Domestic housing and industrial buildings, repairs and services (to only mention a few).

He was a Power Generation Specialist at AEAI, ADVANCED ENGINERING ASSOSIATES INTERNATIONAL (Afghanistan) where he specialised in: repairs of generators, planning and scheduling of maintenance sets, daily prof. services and repairs, assisted in the costing of budgets ordering of spares, and maintenance and rebuilding of engines, Cummins, mainly.
Contract ended April 2009. (End of TO 5)

Job Description is as follows:
Assist the Power Plant Manager by providing input to identify key success factors
For the Power Generation crew, as well as the training of the Local Nationals,.
Provide leadership to cause the creation of organizational structure and processes required.
To fully execute the requirements of services and is responsible for the execution of Power Generation services, quality performance and maintenance costs.
Evaluate Power Generation service execution for compliance to contract, design data, schedule, and cost budgets.
Maintain the short range look ahead plans.

has experience as:
Service Advisor,
Electrician: repairs, fault finding of existing wiring on
Residential homes and buildings, installations, wiring of DBs etc.
Artisan- Electrician and Machine fitter: Repair and services to Hydro vane ï¿½ï¿½"screw and Piston Type Air Compressors
Branch Manager: Workshop Foreman, Foreman of a workshop for the
Manufacturing of Stainless-Steel products, installing of S/Steel Balustrades and daily planning of projects in Mpumalanga and Maputo Euro Steel are the Stockists and Distributors of S/Steel Materials and fittings. Receiving and Dispatch of ordered Material. Weekly and monthly stock takes and recons.

Andre started his career at SANDF as apprentice at the School of Signals in Heidelberg where he attended many courses ï¿½ï¿½" passed theory on Diesel simulators and practical on diesel and petrol driven generator sets. During the training period of 10 years, Andre was appointed as workshop foreman of the repair and maintenance department. Andre was transferred to Namibia where power plants had to be managed.

was in charge of all Power Units (gen sets) throughout Mpumalanga at all military bases.

EDUCATIONAL QUALIFICATIONS:

DIPLOMAS / CERTIFICATES: T1 Electrical
Mathematics
Electrical / Mechanical
Engineering Science
Applied Technology

OTHER COURSES: Pretoria College for Advanced Technical Education
(Electrical, Diesel Engines; Batteries Lead acid; Power Reticulation; Electrical Panel Wiring; Panel Faultfinding; Motors and Switchgear)

Generator Power sets Mobile and stationary
(Industrial Physiology; Production control; Workshop organization and control; Auto Electrical)

NAT. SAFETY COURSES( NOSA): Preliminary Safety Training
Advanced Safety cert. No NT/A06/82/0040

AWARDS RECEIVED: Southern Africa Medal awarded for Outstanding
Service # 24933
Cross border Operations. # 001914
Operation Moduler # TP215 # 180
Operation Hooper
Operation Packer #251
Operation Displace.
C of the Army recommendation Medal for outstanding services rendered #4838

ADDITIONAL COURSES: Logistics and Warehousing 95,5%

EMPLOYMENT HISTORY

May 2008 ï¿½ï¿½" April 2009, AEAI ADVANCED ENGINERING ASSOSIATES INTL.
Power Generation Specialist, Maintenance and Repair of Generator sets, Kandahar Power Station, AFGHANISTAN Planning and scheduling of services, and engine overhauls, on Cummins sets. Managed the project of a new 10 MW Power Station being built on site (Cummins QSK 60), wrt all planning, and operational requirements, up to commissioning in JAN 09.

March 2007 - April 2008, KELLOG BROWN ROOT, Power Generation Technician, IRAQ. Maintenance and Repair of Generator Sets, stationary Daily planning and scheduling of services And repairs, ordering of spares Repair and Maintenance of PERKINS CUMMINS, CATERPILLAR AND FG WILSON Engines and Alternators, Trouble-shooting generating ï¿½ï¿½" sets, 85 KVA ï¿½ï¿½" 2015 KVA sets.

2005 ï¿½ï¿½" 2006, STEEL IMAGE / EURO STEEL, Branch Manager/Foreman, South Africa. Foreman of a workshop for the manufacturing of Stainless-Steel products. Installing of S/Steel Balustrades and daily planning of projects in Mpumalanga and Maputo. Receiving and Dispatch of ordered Material. Weekly and monthly stocktakes and recons.

2000 -2004. SWIFT ELECTRICAL, Foreman of Works, Electrical Division South Africa
Foreman of a Workshop for the Wiring of Residential and Commercial Buildings. Wiring, circuit testing, installations, Distribution boards and reticulation of the above.Maintenance and repair contracts on Stand by generators as per contracts.

1978 ï¿½ï¿½" 2000, SANDF, South Africa

1996 ï¿½ï¿½" 2000 - Workshop foreman in charge of all Power Units (gen sets) for all military bases in Mpumalanga. Transferred to the signal unit In Nelspruit. (1996 - 2000 ) and appointed as Workshop foreman in charge of all Power Units (gen sets) throughout Mpumalanga at all military Bases All repairs and services to this equipment throughout the region was done by Van Zyl and his team of specialists.

1990 ï¿½ï¿½" 1995 - Workshop-Foreman in charge of all Telecommunications, and Power plants, Namibia Military bases. During January 1990 Mr. Van Zyl was transferred to 6 Signal unit in Namibia, where he was appointed as Workshop-Foreman, in charge of all Telecommunications, and Power plants deployed throughout Namibia at Military and operational bases. All these power plants had to be maintained (electrical and mechanical supervision). No subcontractors were appointed to do this task. Mr. Van Zyl was the workshop Foreman for 5 years.

1978 ï¿½ï¿½" 1990 - Trainer and Technical Advisor (Generation sets, etc). Started as apprentice (1975 ï¿½ï¿½" 1978) and qualified as Electrician (Signals) in 1978. During 1978 - 1988 trained apprentices in the following subjects: Generator Sets, Diesel Engines and Power supply units. Trained Apprentices at the SANDF School of Signals (Heidelberg) for 10 years in the following disciplines: Workshop Foreman; Financial Manager; National Health and Safety Representative; Qualified as Millwright 22 years on Power Supply; Units, Mobile and Stationery. Gen- Sets 1.5kva/1500; Diesel Engines Qualified, Diesel Fitter; Wiring and Power reticulation, single and demob. ; Panel Wiring, Electric- Motors and Switch-gear; Auto- Electrical, Battery Charging and rebuilding; Installation of Solar Panels, Veld-Lighting, Distribution and reticulation of operational bases; Operational Employment outside the Countries Borders; Gen ï¿½ï¿½"sets, Maintenance and repairs.

Was extensively involved in operational and urban capacity as Technical Advisor. Work he did as Signals Electrician entailed that all Power plants as a whole was his responsibility, serviceability wise, meaning that the electrical as well as the diesel/petrol engines had to be maintained by one specialist. During this period of training he was also appointed as the Work-Shop Foreman of the repair and maintenance department.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 3437)

Go to Search Parameters...

Brief Description

Over 20 years experience as Project / Construction Manager on overseas assignments. Extensive experience in pipe design, fabrication and inspection of refineries, LNG plants, chemical plants, power plants, pipelines and mining facilities. After college, started a career as a craft pipe fitter in Hou

Microstation & AutoCAD, Photography, Energy Managment, Mechanical Engineering Technician, Teaching English as a Foreign Language

14 years of diversified project management and controls experience (EPC) in the oil and gas industry (up and down stream). Assignments include: Project Manager, Project Controls Manager, Lead Scheduler, and Lead Cost.

Heavy Lift Manager

I have a degree in Mining Engineering from Southern Illinois University. I have worked one mining engineering internship.

worked in the Middle east on Power plants for 2 and a half years, stat generator sets

Journeyman Millwright (Industrial Mechanic) 4 years overseas at a high altitude gold mine. 6 years working in various industries in western Canada. 36 years old.

Seeking graduate mining engineering position 2004. Have open pit gold experience. Seeking underground time.

I want to be widely active in the wide variety of Applied research project dealing into Environmental Geology, hydrogeology, GIS.

Geotechnical Engineer, foundation settlements, reclamation, interpretative and factual report writing

Broad and diverse drilling experience with specific in-depth knowledge of Tamrock DK-75 & DK-95 Double Pass, B&E series 49R Electric, P&H 1200 Electric, Atlas Capco 271 & 351 Pit Viper, and Atlas Capco Rock-8 Pre Split Drill.

I'm a Personal assistant to the director, have completed the following: Diploma in Public Relations, Diploma in Business English and current doing a Diploma in Finance Management.

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

I can ensure the Run of Mine (ROM) and plant performance are optimal, quality production,Expertise in operation of HEMM. Drilling and Blasting.

Over three years of experience in the application of earth science engineer expertise in the areas of Geomechanics, computer modeling using finite element modeling tools, site stabilization, expansive soils evaluation and treatment, soil/rock mechanics laboratory testing including procedures, quali

Heavy Duty Mechanic

I am a HSE Professional with more than 6 years experience covering construction, mining, manufacturing and petrochemical.

Due diligence, metallurgical audits and technical reviews. Simulation – based optimization of metallurgical processes. Project evaluations, feasibility studies, sensitivity and risk analysis. Metallurgical testwork program reviews. Multivariate and nonlinear statistical analysis.

cool,hardworking,highly flexible

Energetic Maintenance Manager seeking employment out side Africa, I’m Self Motivated Self Disciplined and have Extensive Experience in Managing Large Opencast Mining Fleet and Large numbers of Work Force

Warehouse/Supply Management,/Logistics co-ordination and purchasing skills.

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

I am a post graduate(M. Tech.) in engineering from IIT delhi, recently worked with Qatar Drillcon WLL as site engineer in microtunneling works with AVN 800 B Tunnelling Machine.

Experienced underground Miner I, with six years underground experience. Seeking mining job preferably in Alaska, but will consider other areas.

I am looking for an entry level position in the mining industry. I graduate in December of 2002 with mining degree with a quarrying emphasis from the University of Missouri-Rolla.

jobs wanted anywhere salary as per qualification fresher branch=EEE

I'm looking for a long term employment with retirment and medical

Chemical Engineer seeking internship/future employment

Need a welder?

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

I’m a good communicator who is able to work in a team and can handle pressure. . I am also willing to relocate, work over-time, after hours or/and be on stand-by if and when necessary.

Exploration Geologist

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Constructional Blasting, Quarry work, Coal Mines

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Blueprint reading ,Hydraulics,Sheet metal layout, fabrication,Mig, Arc, Gas Welding,3-phase electric motors, Underground explosives

Intermediate Mining Engineer with several years of practical underground metals mining experience.

Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.

Heavy Equipment Mechanic/ Operator/ Welder or Mill Maintenance Mechanic.

an experienced radio communication technician and electronics technician

Machinist,C.N.C. / Manual 20+yrs. experience

Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Geologist, Environmental, GIS, Modeling

Oil & Gas, Petrochemical Industry Specialist

Ten years experience working as a geologist working in Australia and Eastern Europe. Recent experience has focussed on geological data management, resource modelling and regional exploration. Gold and copper experience from grassroots to feasibilty stage.

Professional Contract Chef / EMR Available

I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out