Resume - All duties included in miner 1 have certificates and mine safety

Misco Jobs

Resume #83414

CONTACT INFORMATION:
View contact information...

Objective- I am looking to expand my knowledge and career in the mining field. I am
HARD WORKING AND VERY SAFETY CONSCIOUS.

Experience- Thyssen Mining of Canada Saskatchewan, Regina
Kensington Project Fort A'la Corn Diamond Mine
Date started april 2006 to present date
-Jackleg mining, shotcrete nozzle and pot. Bolt and screen, drill, load, blast
Sunk shaft with pluggers. Grouting, slip forms, cement pour.
Ran scoops was also there from beginning of set-up and there until final demobe.
Little clam experience on this job site.

Thyssen Mining of Canada Saskatchewan, Regina
Lanigan Potash Corp Lanigan, Sask
Date started feb 14 to April 2006
-Changed skips and ropes. Steel work in loading pocket

Thyssen Mining of Canada Saskatchewan, Regina
Fort A'la Corn Diamond Mine
Date Started July 1/2004 to Feb 10/2006
-Drill, bolt and screen. Jackleg, drill and load blast rounds. Operate scoop, install venting tubing, install air and water pipe. Ran shot crete and nozzle. Also did grouting.

Mudjatik Thyssen Mining Saskatchewan
Sunk shaft 2-Miner
Date started Jan 1/2005 to Jan 12/2005
-Steel work, just set-up to start sinking shaft.

Thyssen Mining Saskatchewan, Regina
Sunk shaft at Cigar Lake
July 3/2003 to Sept 15/2003
- Drill bench with pluggers, load, blast, muck out with clam. Install liner plate. Poured and placed concrete. Slip form with hydraulic lift.

Education- Revelstoke Secondary School, general diploma of grade 12 completion/1997
Certificates: Saskatchewan blasting ticket 2006
Whimis Certificate
Site Safety Certificate
Shifters Ticket 2008
Standard First Aid

I have sunk three shafts from start to completion of demobe. My certificates and letters of Recommendation are available upon request. Also have more experience mining in revelstoke bc at the hydro electric project.

References- Avaliable upon request I am currently working at Mc Carthur river from corresponding field above.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 3492)

Go to Search Parameters...

Brief Description

Experienced senior field QC Seismologist in desert, arctic and shallow water OBC. Comfortable with all aspects of in-field QC, including data processing, source/receiver attribute analysis, survey design and planning and reporting. Exp in Tango, GeoCluster, Geoland, Mesa, Perl, LabView, Testif-I.

I had my M.Tech from IT-BHU, Varanasi, India in Mine Planning. My M.Tech Project work on "Reliability Analysis of Longwall System by Fault Tree Method" and B.Tech project on "Predicting The Production Of Opencast Mine (Simulation Approach).

Seeking an international position on an oil platform, drilling company, shipping industry, mining industry or any similar heavy duty industry as Mechanical Fitter and Turner where my experience, training and good working habits will be an asset to your company.

Eight years in the mining industry enables me to bring a vast knowledge base to any employer. Experience with the semiconductor and construction industry provides new perspective into process improvements and quality. I use AutoCAD and interpret blueprints. Willing to relocate.

To obtain employment in the mining industry. Thank you for your time and consideration.

Entry level Mining Engineer. - +7 years work experience in mining industry. - project management, project supervision, employee management, safety policy implementation, and quality control - strong work ethic, professional and conscientious - written and oral communication skills

I’m currently a senior in Mining Engineering at South Dakota School of Mines and Technology and I am looking for a full time entry level position in my chosen field starting in January 2002.

31 year old male geologist with 8 years experience in diamond and gemstone mining industry in Africa. hold a BSc (Hons) from Imperial college London. Willing to relocate and work anywhere.

A detailed summary of my skills and experiences within all the aspects of production drilling and blasting, both in open cut and underground mining. I have specialized in this field for the last fourteen years and my resume details my competence and confidence within the mining industry.

Underground Mining Engineer with 20 years experience as Director, manager and shift supervisor

5+ years Hardrock Underground Mining Experience, 4yr Engineering degree complete in Dec. 2006, Seeking International Work

Engineering: Civil Structural Mining and Project Management

Operating zoomboom,over head cranes 20,40,80ton,loaders 644,624,544,l90,l120,packer 2,000hrs have my loader tickets and crane tickets. first aid level a cpr .

I have the energy, skills and flexible attitude to meet the requirements of a progressive company and I am more than willing to meet the challenge.

B Level welder with CWB flux core ticket, bondable, dual citizen (Canada/USA),

Senior Civil Structural PDMS AutoCAD Designer

Ky & Tenn certified Underground Mine foreman with 16 1/2 yrs experience

MBA, 100% Spanish and English.

Executive management, business development, supply chain, IT, embeded system

National certificate in machine shop engineering

Over (3) years practical experience in surface and underground mining environments. Experienced in short-range mine planning. Familiar with production scheduling and phase sequencing using Net Present Value (NPV) method. Proficient in relevant mine planning and geotechnical software.

48 years old white male and currently employed at Esayidi Further Education and Training (F.E.T.) College, Port Shepstone Campus, as a Technical trainer, Lecturer, Assessor and Moderator, DTTC Assessor and Moderator.

I am currently working as an Operations Research Officer in De Beers. I am based in its headquarters, in Johannesburg. My key responsibility is to compose optimal plans for management for mining our resources subjected to various constraints and objective functions.

Seeks a challenging management position in a Metallurgical process control, Evaluation or Re-engineering environment and related jobs, which suit my resume.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Heavy equipments mechanical engineer

State of West Virginia Asst. underground Mine Foreman 1459-A

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

Inexperienced Surface Miner, Class A CDL Truck Driver, Army Veteran, Paralegal

All duties included in miner 1 have certificates and mine safety

fast learner and holder of bachelors degree in mining engineering

An astute professional with 2 years of experience in Smelting, Project Management & Marketing.

Primavera Project Planning Mining, Oil and Gas

I am MSHA trained and have been tasked trained on all types of equipment (60 ton cranes down to 5 ton cranes, front end loaders, forklifts, man lifts, skid steers ect) I am cpr certified, I work well under pressure with short deadlines, I am very dependable am a self starter. Able to multi task hard

GIS-Geophysicist/Databse Administrator

9 Years experience in Laboratories and Fire Assay

Geotec Assistant

PIPING DESIGNER

Metallurgy engineer with experience of smelter, production (exctraction) of aluminium and production planning

8.5 years of experience in Plant layout and Piping Engineering/CAD Administration on Petrochemicals, Refineries and Mining & Metallurgy projects

Young Energetic Engineer, capable of achieving objectives, with excellent analytical and communication skills, skilled in troubleshooting, analysing faults, servicing & repairs of caterpillar machines & engines, also handled information entry & report generation, opening & closing of transactions

Mining Engineer, Open Cut, Quarry, Mine Planning, Operation of mines, dimesioning of machinery, international experience

I have five years experience in underground mining.I have worked my way from nipper to just laerning to operate bogger.Why has its taken my so long to get this far u ask?,i have taken the years of mining to understand each job disapline.To hopfully keep others & me safe and make me a better miners

A Chemical Engineer with 10 years of experience in Procurement in Oil/Gas and Minerals Industry

bio medical engineer

MCSA & CCNA Certify (System Administrator)

Senior EPC/EPCM Manager with +30 years experience of successful multi-disciplined project & program management; successfully organizing, managing and directing large mining, heavy civil and infrastructure projects

I have skill in Enghlish (reading, listining etc) and I have skill in using computer .

Maintenance Superintendent with over 20 years experience in Mining and heavy industrial workgroups, I am a compedent and efficient manager of resources and always meet my target goals. My goal is to work for a respected organisation in the mining industry which will provide both challenge and reward

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out