Resume - Accomplished, Achievement-driven, Results Oriented and Passionate about realizin...

Misco Jobs

Resume #84088

CONTACT INFORMATION:
View contact information...

EDUCATION
Master of Science, Material Science and Engineering May 2009/GPA: 3.60
University of Texas at Arlington, USA

Bachelor of Technology, Metallurgical Engineering May 2004/GPA: 3.82
National Institute of Technology, Warangal, INDIA

INTERNSHIP
Visakhapatnam Steel Plant Visakhapatnam, INDIA Jan 2003 – May 2003

Departments: Speed Control of Light and Medium Merchant structural mill, Rolling mills, Sintering and Blast Furnace

-Conducted time studies on each process responsible for cracks in the final product (reinforcement bars) and identified potential bottlenecks to speed and temperature of hot rolled and cold rolled wire rods and developed methods to reduce these impediments to efficiency
-Responsible for the study of the efficiency of the pelletizing drum which decides the permeability of sinter bed thereby affecting the productivity of sinter machine, quality analysis of the raw material
-Performed gas velocity rate studies on Top blown Converting gas in the furnace - the cornerstone for removal of impurities from Molten Pig Iron in the form of Oxides
-Processed and assisted in collection of converter gas which is used as a fuel in the plant – special feature of energy conservation

INDUSTRY EXPERIENCE
Madras Aluminum Company (MALCO), a Unit of Vedanta Resources Plc Mettur Dam, INDIA

Smelter Process Engineer June 2004 – June 2006

-Supervised and Administered 24 Vertical Soderberg Aluminum Electrolytic cells and managed 22 production line workers
-Achieved daily targeted Aluminum molten metal production through electrolytic metal extraction process, Coordinated with Maintenance and Foundry personnel to achieve process objectives
-Trouble shooting activities which included regular monitoring of energy consumption, reducing the number of anode effects, maintaining electrolytic bath chemistry and Bath Temperature monitoring
-Coordinated in implementation of Electronic Pot Control (EPC), Bar Breaker and Point feeder technology for the controlled operation of the Aluminum Extraction.
-Team Member for start-up and stoppage of electrolytic cells, anode in-line baking and cathode relining process
-Coordinated with foundry department in manufacturing process of Alloy preparations, Aluminum ingots, Wire Rods and Bus Bars resulting in a savings of $0.7 million in fiscal year 2005-2006
-Synchronized with carbon plant in maintaining the Anode Quality, Reduction of Paste Leakages and Anode Spikes
-Performed extensive testing on purity of Aluminum and Alumina and ensured they were free from impurities and fines respectively
-Deployed statistical tools for reporting variances in the functioning of electrolytic cells, cost control of the production processes, labor efficiency and productivity, inventory management of raw material and metal produced and monitored safety standards
-Monitored equipment utilization and machine downtime with responsibility for the implementation of corrective and preventive actions to reduce MTBF(mean time between failures)
-Involved in six sigma project to reduce the melt loss in the cast-house and was an yellow belt
-Acted as a team member for achieving of ISO 9001, ISO 14001 and OHSAS 18001 certification and implemented in the shop floor
-Underwent training in SAP 4.7 Materials Management module and was an end user
-Received 'Best Employee of the month ' award – March 2006

Foundry Engineer: July 2006 – July2007

-Alloy melt preparation for casting into ingots and wire drawing operation as per customer requirements
-Involved in record Bus Bar production with required specifications for BALCO expansion project, another unit of Vedanta resources, INDIA
-Defect identification in final product through microstructure characterization and proper metal degassing techniques
-Implemented SPC tools for maintaining quality and meeting customer specifications for EC(electrical conductivity grade),CG(commercial grade) and LP(Low Purity)

RESEARCH EXPERIENCE
University of Texas at Arlington, USA

Research Experience Aug 2007 – current date

-Successfully improved efficiency by Omni-Directional Anti reflection Coating on commercial Amorphous Silicon Solar Cell
-Carried out computer simulations for Anti reflection Coatings on Amorphous Silicon Solar Cell and Organic Solar Cell using Rigorous Coupled Wave Analysis
-Created Angle Dependency Testing for Solar Cells using AM1.5 Solar Simulator
-Experience in single crystal silicon processing from ingot to capacitor fabrication as a part of Silicon Integrated Circuit Fabrication course work
-Proficiency in Thin Film Deposition, Sputtering, Physical Vapor deposition, Oxidation Furnace, Diffusion, Ellipsometer, Profilometer, UV-VIS Spectroscopy, Fourier Transform Infrared Spectroscopy

ACHIEVEMENTS and EXTRA-CURRICULAR ACTIVITIES

-Received Department Scholarship award during Master of Science
-Awarded special Appreciation Letter from Chief Executive Officer(MALCO) for outstanding effort during crisis period
-Team Member for the TQM project "Reduction in Pot Turn-Around Time" and achieved in record 22hrs resulting in significant savings to the tune of $ 0.25 million and was published in TMS (The Minerals, Metals and Materials Society)
-Participated as a team member for successful implementation of Just-In-Time (JIT) inventory management resulting in potential savings totaling $ 0.50 million
-Suggested and implemented an idea of keeping high melting point and thick metal sheet under the pot to avoid damage to the Bus Bar during the pot puncture
-Received Merit certificate and Merit scholarship award in Bachelor of Technology for the first year and second year
-Best paper award for presentation on 'Composite Materials and their Importance' at National Institute of Technology - Warangal, INDIA

PUBLICATIONS
-"Solution-Processed Omni-Directional Antireflection Coatings on Amorphous Silicon Solar Cells" in Journal of Applied Physics(2009)

COMPUTER SKILLS
-Platforms: Windows - all versions, Macintosh, Unix
-Office Packages: Microsoft Word, Excel and powerpoint, Microcal Origin,
-Matlab, Labview end user
-Communication Packages: Lotus Notes 6.5, IE 5.0, Mozilla Fire fox, Netscape, Microsoft

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 3489)

Go to Search Parameters...

Brief Description

To obtain work in the mining Industry using my experience as a warehouse attendant.

I seek a position that will give me an opportunity to develop project strategies that enhance efficiency through the implementation of cutting-edge technologies, efficient application designs and intelligent reporting practices.

professional seeking new challenges.

Dynamic Safety / Training specialist with 12years within Open Cut mining environments.

Competent in all aspects of open cut mining.

Superintentant sand and gravel mining, from start to reclamation./ Clean construction debris and recyling site experiience.

I am a qualified geologist who graduated from the Ecole Nationale d’Ingénieurs du Mali (ENI) in 2001

Quality assurance, reserch and development. Section - Process control in charge, shift in charge

Over 18 years of extensive experience Maintaining a Safe Work Culture, Budgeting, Strategic planning, Policy Development/Implementation, Finance/Leasing, Fleet Maintenance/Management

COAL AND MINERAL MINING PROJECT MANAGEMENT (SCM / INVENTORY MNGNT / LIASIONING / COMMERCIAL / ADMIN)

Experienced Driller's Assistant

Young geologist looking for Interesting Career

Underground Geology Technician & Surface Worker

Graduate Surveyor, December 2008, Western Australia. Looking for mining jobs. Not limited to any location in Western Australia

Blaster, Driller, Driver

Sr Structural Designer / PDS FrameWorks Coordinator and project set up.

Free! Oil & Gas Finance, Commercial Manager. 30+ years industry and 20+ years international experience.

Masters Degree in Mining Engineering and Mineral Processing; +3 yrs work experience as Research Scientist within Global Engeering Services of International Industrial Minerals Company; fluent in English and German language

Accomplished, Achievement-driven, Results Oriented and Passionate about realizing a challenging career that allows meaningful contribution to Metal/Manufacturing Industry .Had 3 years of primary aluminum production industry experience and recently graduated in material science and engineering

Class 6 Underground Coal Miner. Certified Welder. Certified structural steel welder. Skilled in rebuilding all types of machinery. Skilled in running all types of equipment.

Piping Design & Stress Engineer, Caesar II, Rohr II, PDMS, Auto Pipe

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

Kimberlite Geologist / Angola / Portuguese speaking / 6 years experience / Planning, implementation and supervision of exploration activities.

15 years of dragline experience

Graduated from the University of Zambia in 1996 with a bachelor's degree in Metallurgy & Mineral Processing. Six years experience in the mining industry. Worked as a Production Operator for 1 year 4 months, 7 months as a Production Foreman. Worked as a Metallurgist for 4 years.

PROFILE: A self-motivated and hard working Geologist with experience in Mining and Exploration of gems, precious metal and industrial metals. A capable leader, able to use own initiative and work as part of a team.

Well rounded journeyman electrician looking for industrial, commercial or residential position. Experienced with supervising apprentices and other jw's.

Smart, skilled and experienced, electrical/ mechanical available for camp/ remote locations ( extreme camping)

I have been in mine maintenance for over 20 years, the last 9 as an expat in various countries around the world. I'm a very positive and progressive thinker who adapts to changes and adversties with little fuss. I like to succeed in everything I set out to do

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

„XRepaired Haul Truck s and Crawlers,„X Repaired Equipment, „XWorked as a field Tech, Operated Forklift ,Diesel Mechanic Intern

Young academically accomplished geotechnical engineer, practical experience in the mining industry both domestic and overseas.

Knowledge of Hydrotreating & Hydrocracking, Catalytic Cracking, Distillation and Amine plants. Knowledge of Process simulation (HYSYS, ASPEN Plus, PRO II and HTRI), PFD, P&ID, Flare and Relief systems, LDT, Hydraulic calculation, HAZOP review, Equipment sizing, TBE, DPDT and process data sheet

Crane operator

Obtenir un emploi dans une entreprise dynamique qui me permettra d’évoluer en utilisant mes connaissances et mes aptitudes et dans laquelle il existe des possibilités d’avancement. Face à un nouvel emploi, je recherche la stabilité, diversité et je désire relever des défis

25 years as a cook or manger in the food service operations

Diamond and RC Driller

I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.

Entry level geologist

I have experience in the following operations - excavation, ditching, levelling, hammering, drilling, charging, blasting, scaling, timbering, mucking, rock bolting, hauling, shot crating and concreting, steel set installation.

Bachelor degree of computer science and Seeking a challenging position, where my technical and communicational skills can be utilized and developed in field of software or quality assurance

Career Objective

Entry Level Mining Engineer

Mining Engineer Seeking employment in the mining industry that will allow career growth and the opportunity for advancement.

I am ready to work for the best of the company and my experience

Geological Engineer, mapping, petrography, reserve estimates, exploration, mining, import/export, well drilling, GPS, logging, geoframe, geographix, excellent vocational English, MS Office, MBA in Business Administration, Experience in Marketing

I am a recent Master of Business Administration graduate with a concentration in finance and a background in the mining industry. I am currently looking for a finance position with a mining or resource company. I plan to pursue an accounting designation and would welcome the opportunity to relocate.

I am looking for overseas work in the mining industry. I have seven years exp. in a wide variety underground operations.

Masters student in Materials Science and Engineering with BS in Applied Physics seeking engineering related position after graduation in Spring 2002.

FIELD OF SPECIALISATION (a) Design of method of extraction of pillars and their stability. (b) Design of support system for coal mines. (c) Multiple-seam coal mining. (d) Strata behaviour in Blasting Gallery method. (e) Design of supports and strata behaviour in Hydel Power Projects.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out