Resume - Engineer with practical business, design and management experience in the areas ...

Misco Jobs

Resume #84600

CONTACT INFORMATION:
View contact information...

OBJECTIVE

To obtain a leadership position as a Principal Engineer or Engineering Manager with a top echelon company working internationally on major projects.

SUMMARY OF QUALIFICATIONS

Engineer with practical business, design and management experience in the areas of Civil and Geotechnical Engineering. Solid professional education, with a commitment to continuous improvement, ethics, teamwork and quality customer service. Detail oriented, excellent communicator, and capable of managing a large number of simultaneous projects and responsibilities.

PROFESSIONAL EXPERIENCE

Senior Engineer – Public Works (City of Riverside, CA) 2007 – Present

Management of daily operations for Land Development division of Public Works department serving a City of over 250,000 people. Supervision, training and evaluation of public employees including engineers and service representatives. Department representation coordinating with large private development and investment companies, private engineering firms and federal, state and local agencies.

* Completed 3-month comprehensive review and revision of watershed boundaries and drainage sub-areas encompassing approximately 120 square miles representing City of Riverside sphere of influence.
* Authored City specific WQMP template, incorporating 20 pages of project specific documentation, 2 original Citywide index maps, 7 revised guidance tables, 16 brochures of public education materials, 40 pages of technical agency specifications, 5 USGS quad based soils maps, 2 revised design worksheets, 6-page agency BMP handbook, and Covenant & Agreement developed cooperatively with City Attorney's office.
* Implemented 2 new processes for the review of demolition permits and tenant improvements for assessing both 2008 sewer rate and capacity charge increases, and for the Transportation Unit Mitigation Fee.
* Cooperated with and responded to fiscal years 2003-2007 internal audit.

Plan Check Engineer – Public Works (City of Riverside, CA) 2005 – 2007

Determination of compliance of grading and improvement plans with City of Riverside Municipal Code and approval as to adequacy of engineered design for construction. Determination of compliance of water quality management plans with Southern California Regional Water Quality Control Board and approval as to adequacy of water quality treatment for construction. Department representation at Planning Commission and Subdivision meetings. Supervision and technical assistance to development staff.

* Reviewed and approved 100 grading plans, with associated street, sewer and storm drain improvement plans, for 30 residential housing tracts, 20 commercial developments, and 50 individual building permits.
* Reviewed and approved 40 water quality management plans (WQMP's).
* Represented the Public Works Department in developing planning case conditions for 25 pre-development projects.
* Provided critical requirements determination and testing for 2007 Edgesoft grading permit pilot program ($50K), in anticipation of Citywide implementation ($2.5M).
* Participated in the 2008 Budget process, validating existing fees and charges plus identifying 2 potential new revenue sources associated with City services.

Project Engineer (Stoney-Miller Consultants, Irvine, CA) 2000 – 2005

Project management. Planning and supervision of field investigation and repairs. Review of structural plans and construction/planning documentation. Analysis of compaction grout mitigation, landslide mitigation, liquefaction and deep fill settlement. Development of soil strength parameters. Report writing and response to engineering review. Supervision of subcontractors, field engineers, field geologists and technicians.

* Investigated soils related damage to 4 Las Vegas, NV area and 3 San Diego, CA area residential housing tracts (numbering between 100 to 400 homes each).
* Advance planned and directly supervised comprehensive investigation of soils related damage to Nikken major corporate headquarters in Irvine, CA.
* Performed deep fill settlement analysis and 5-year field mitigation and monitoring for Talega, a large scale residential housing and master community development in San Clemente, CA including (4500 homes, golf course, elementary school, 3 bridges, residential apartments, and business park).
* Analyzed slope stability failure of 2005 Bluebird Canyon landslide in Laguna Beach, CA, and designed 3 phase stabilization and hillside reconstruction.

Staff Engineer (Stoney-Miller Consultants, Irvine, CA) 1996 - 2000

Responsibility for field sampling, measurement, investigation and assessment of performance. Measurement and analysis of chemical soil properties. Foundation settlement and slope stability analysis. Observation of soil wicking and tieback installations. Collection, organization, analysis and presentation of field data. Review of plans and technician field reports. Supervision of field technicians.

* Performed stability analysis and determination of failure for the 1995 La Conchita landslide in Ventura County, CA.
* Maintained for 2 years the quality control / quality assurance of soil compaction observation & testing for Talega, a large scale residential housing and master community development in San Clemente, CA including (4500 homes, golf course, elementary school, residential apartments, and business park).
* Prepared geotechnical investigation and site mitigation for construction of Mercedes Benz dealership in Laguna Niguel, CA; 5 Walgreens 1-story retail buildings in Orange County, CA; and parking lot expansion to serve Toshiba manufacturing center in Irvine, CA.
* Analyzed cliffside erosion and provided stabilization design for Heisler regional park in Laguna Beach, CA.
* Provided preliminary investigation and foundation recommendations for very highly expansive soils conditions for 3 Irvine, CA area residential housing tract developments; Centennial, Trieste, & Cambridge (numbering approximately 100 homes each).

EDUCATION

B.S. Civil Engineering, Loyola Marymount University, Los Angeles, CA, 1995.
M.S. Geotechnical Engineering, University of California Berkeley, Berkeley, CA, 1996.

PROFESSIONAL REGISTRATION

Registered Civil Engineer # C 68854 - State of California

TRAINING

Computer Skills: - AutoCADD, Microsoft Word & Excel, GSTABL7, Liquefy2, SETTL/G.

Written and Spoken Languages: English – Primary, Spanish - Secondary

Special Certificate Programs: Professional Advancement / Career Enhancement (PACE)
* PACE Certificate Level 1: Advanced Career Development o "Self Management" November 2007
o "Partnering for Results" December 2007
o "Resolving Interpersonal Issues" January 2008
o "Navigating Change" February 2008
o "Virtual Teams" February 2008
* PACE Certificate Level 2: Dynamic Organizational Leadership Development o "Situational Leadership II" March 2008
o "Forging Breakthroughs" April 2008
o "Managing Change" April 2008
o "Reframing Change" April 2008
o "High Impact Hiring" May 2008
o "Retaining Talent" May 2008
o "Optimizing Team Performance" June 2008
o "Building Community" June 2008
o "Technology and Innovation" June 2008

Courses Completed toward Management Certificate – City of Riverside Human Resources
* "Recruitment, Interview & Selection" March 2007
* "Stress Management" May 2007
* "Listening to Understand" May 2007
* "Teambuilding" May 2007
* "Key Supervisory Skills" June 2007
* "Performance Evaluations" July 2007

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 3487)

Go to Search Parameters...

Brief Description

Production Drilling and Blasting. Over 20 years experience in production mining, open cut and underground, Aust and Africa

Engineer with practical business, design and management experience in the areas of Civil and Geotechnical Engineering. Educated professional, committed to continuous improvement, ethics, teamwork and quality service. Detail oriented, excellent communicator, and capable of managing multiple projects

I am having more than 16 years experience in secretarial field, out of which 8 years in U.A.E. only.

Mineral Processing Engineer(16 yrs exp.)10 yrs as mill sup't in Cu,Zn,Au,Ag operations. Personnal traits: team leader, flexible, resourceful, team-oriented, good communicator. Skills: technical & managerial aspects of planning, operation, projects, budget, processes, training, HSE

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

To obtain Position in Project Management or Project Engineering in an International Environment

5+ years underground mining. Got most tickets. JUMBO/BOGGER/SHOVEL/SHOT FIRERS/TRUCK

PROJECT GEOLOGIST with 19 years experience in Environmental Consulting including soil and groundwater investigations and site remediation, and Oil and Gas Exploration.

I am a self motivated and ambitious Tanzanian holding a Bachelar of Science Degree in mining engineering who can work under pressure. I have got the basic skills in computer and user of Vulcan software.

I am very keen to work outdoors and have a great love of the West Australian outback. Therefore I am keen to work as a Haul Truck Driver and progress from there.

To be a part of organization which enables me to cope-up with emerging as well as the latest trends and provide me scope for widening the spectrum of my knowledge.

Over 6+ years experience in Content Management. Professional Proofreading, Editing, Writing, Documentation using various editing tools as Framemaker, Latex, MS-Word.

LSIT, US Citizen, Willing to relocate

A highly qualified Materials Engineering Graduate, with extensive technical, inter-personal, analytical, and troubleshooting skills, seeks a challenging and exciting engineering position

15+ years of heavy equipment experience on all sizes and pieces of equipment

Twenty+ years of Materials and Procurement Management experience including supervision and management of warehouse contractors, material control, procurement activities including vendor sourcing, requisitioning, procurement and expediting, warehousing including receiving and issuing.

Repair, replace parts, maintain equipment.

My major responsibilities are Core Photography, Core Slabbing ,Core reservation and Storage Services ,Lithology rock description ,Real time monitoring of drilling parameters, preparation of formation evaluation logs, identification and classification of samples

I have 25 years experience operating all types of heavy equipment used in mining, mass excavation construction, fine grading, and underground utililities.

I am a diesel mechanic by trade in the mining and constuction industry. I have 13 years experiance in repairs field service and setting up and running full on maintenance worshops. I am a hands on person getting involve in anything to get the job done properly.

A mining engg from indian school of mines, currently I am working in NMDC an iron ore company, I am in charge of operation and safety aspects in the comapny,

Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)

I have grew up around farm equipment and heavy equipment all of my life. I have worked on many pieces of heavy equipment and wish to pursue a career as a heavy equipment technician

Demonstrated expertise in the life cycle of software development. Proven success track in managing people, resources and processes within a worldwide organization while effectively building internal and external relationships. Have a credible track record in resolving customer-related issues

I have 10 months roof bolting experience, I also have opertated a Joy Miner, Scoop, Joy and Stamler Coal Haulers. I also have a certificate in Welding. I have a total of 1 year and 3 months of underground experiance.

I headed the Paloncha coal project and Jangareddygudem coal projects as Project Manager and monitored the Exploration activities of the projects and successfully and achieved the stipulated targets (Oct 2006 to 10th July 2008)

I am a Materials and Process Metallurgist,, and a Plant Metallurgist ,who have seven years experience in both gold and materials processing in Ghana.

Has the experience and skills required to manage, supervise, handle and monitor all job related aspects of Safety, Health and Environmental protection. Capable and knowledgeable in the process, development and application of different Safety measures that are vital in Offshore & Marine Safety,

Through my drilling experience with companies like Boart Longyear, Redcor drilling, SMD and Humboldt drilling and pump I have gained experience and knowledge in multiple types of drilling including RC (5.25” to 17” bits), Percussive (including directional), DTH and Wire line Coring

SAP, AutoCAD, Pro-E, ANSYS, ARENA, FMEA, DOE, Kaizen, Kanban, 5S, Six Sigma, MS-Office

Coal miner with 11 years experience

Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;

I have thirty eight (38) years in the oil and gas industry as a Landman. During my career I have worked in over thirty (30) states here in the United States. At this point in my career I would consider myself a "Senior Landman."

One year and nine months of domestic mining experience, in a open cut, shovel/truck coal operation. Experience include, long term planning, road design, dump design, Pit design, scheduling, cost estimate, pit production supervisor of Shovel P&H and O&K fleet.

Mining Engineer, Programmer, Mineral Project Evaluation, CTL and GTL Technologies

Have a broad knowledge of maintenance practices and theory in addition to a Bachelor's degree in Industrial Management and a strong desire to work in the mining industry.

I am a fully qualified automotive electrical and mechanical engineer, i have been a light vehicle mechanic for over 16 years and i would like to broaden my horizons and work overseas, i am prepared to travel any where in the world i have extensive knowledge of diesel engines, automatic transmissions

I like new challenge and gain valuable new experience to develop my skill become a potential engineer. I am very familiar to operates computer and applies field equipments. I am a hard working person and be able to work under pressure as a team or individual, a dynamic, self-motivated, have

Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Hand Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)

I would like to use the training I have acquired to become more familiar with the operation and components of operating heavy equipment, and to obtain a position in the construction industry as a certified entry level Heavy Equipment Operator.

I am very noligable in underground mining and equipment

Long Hole Diamond Core Driller

Underground mechanic and miner

Free! IT Manager with 20 years of experience in IT with 8 years of that being in a supervisory and management capacity. I have broad and varied experience in both the technical and management areas of IT.

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

A highly experienced Human Resources Practitioner with a comprehensive and strategic understanding of HRM, business and operational issues and organisational change. Able to devise and implement coherent HR strategies whilst improving internal processes and procedures within demanding environments,

8 years of experience in Mill Wright Maintenance in heavy process industries Worked in Heavy Engineering Establishments. Experience in handling Breakdown and Preventive Maintenance Work of Machine Tools. Hydraulic and Pneumatic Problems.

Mig & Stick Welder

26 years ; Contract Admin/Manager----Procurement

Graduated Professional Chemical Engineer I have many years project engineering experience and this in a number of positions and countries.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out