Resume - I am looking for a position which carries high impact as well as new challenges.

Misco Jobs

Resume #84848

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE
Present
Construction Labor Contractors
Knoxville, TN. (Supervisor) Tom Tilley 865-293-8037
JOURNEYMEN SHEET METAL MECHANIC:

NASA Jet Propulsion Laboratory
Pasadena CA.
2008
ENGINEERING TECHNICIAN II:
Duties included supporting the Mars Science Laboratory (MSL). Assignments included assembly and disassembly of mock-ups, prototype and flight spacecraft. I conducted tests on electromechanical and prototype electromechanical devices and assemblies. Performed and installed assemblies in clean room environments. Qualified flight technician specialist working in high bays and 10,000 class clean rooms and in this capacity supported most of the laboratories at JPL.

JBM Incorporated
Knoxville, TN. (Supervisor) Steve Stiles 865-573-9800
2006 - 2008
SHEET METAL MECHANIC:
I designed, lay out and fabricate equipment and machinery for power plants, paper mills, cement plants and aluminum foundries across the United States. Coordinated teams in the field for installation of equipment that I fabricated in Knoxville, Tennessee.

Bennett Construction
Home Remodeling (owner) 423-257-2057
Santa Ynez, CA.
2003-2006
ARCHITECTURAL DESIGNER AND BUILDER:
Construction and budget input early into the process allowing the design to develop in alignment with the client's goals. Worked in areas from new construction to remodeling kitchens, bathrooms, removing walls, reworking electrical wiring, adding and changing the existing lights, new stucco, new texturing walls, painting, stone work, manufacturing granite counter tops, tile, domes and barreled ceilings and architectural columns.

Space Systems Loral
Palo Alto, CA. (Supervisor) Randy Simons 650-852-4000
2000 - 2003
SENIOR LEAD, LAB TECHNICIAN:
My duties surrounded the Assembly, Integration and Test on communication satellites. I installed flight hardware per payload requirements to the complete spacecraft for final flight. Integration of the communication panels onto the Bus Module, integration of tower assemblies, antennas and reflectors delivering a final assembled spacecraft to the launch base. Programs supported to the following spacecraft: Optus C1, DirecTV-5, DirecTV flights 5/7, Echo Star flights 8/9, Sirius CDRadio flights 2/3/4, Wild Blue, IPStar, MBsat, MTSat-1R, Satmex and Intelsat 9 flights 5/6/7.
Other assigned tasks included the training of technicians, coordinating teams at performing and completing the assigned tasks that had priority. NASA certified in flight harness, flight bonding of structure, thermal compound adhesives, the mate/demate of harness connecters and torque certifications. I assigned a stamp for witnessing as a quality delegate which is equal to QC quality control.

JBM Incorporated
Knoxville, TN. (Supervisor) Steve Stiles 865-573-9800
1997-2000
SHEET METAL MECHANIC:
I designed, lay out and fabricate equipment and machinery for power plants, paper mills, cement plants and aluminum foundries across the country. Coordinated teams in the field for installing the equipment fabricated in Knoxville, Tennessee

United Technologies Chemical Systems
San Jose, CA. (Supervisor) Cliff Williams 408-776-5315
1987-1994
MISSAL SHEET METAL MECHANIC:
Lay out and fabricated all flight hardware working with a team of engineers for the new upgrades to increase payloads on the Titan IV Launch Vehicle. Assembly and hydrostatic testing of flight hardware for the following programs: Space Shuttle 'Booster Separator Motors', Tomahawk Cruise Missile 'MK 111 and MK 106 Motors', and Trident-D5 ICBM. Assembly and helium leak testing for the Tomahawk Cruise Missile 'Titanium Warhead'. Heat-treated flight components for Titan IV and Tomahawk programs.
Worked with design, manufacturing and quality engineering teams to implement new programs. Fabricated all the flight hardware totaling forty flights and eighty boosters of the Titan IV Launch Vehicles.

Lockheed Missile and Space Company
Sunnyvale, CA.
1984 - 1985
VEHICLE TECHNICIAN AND SHEET METAL MECHANIC:
Developed shop aids and tooling for a wide variety of spacecraft projects.
Fabricated and installed components on spacecraft systems.
Planned necessary operations and their sequences.
Layout and selection of materials and parts per drawings.
Recommended solutions for engineers from both verbal and written instructions.

Lockheed Missile and Space Company
Austin, TX.
1981-1984
SHEET METAL MECHANIC:
Worked within several test teams to prove launch capability of unmanned remote vehicles.
Assisted R&D teams with UAV's onsite, at launch, retrieval and at wind tunnel facilities.
Evaluated data and provided design recommendations to systems engineering.
Fabricated ground support and flight hardware for special programs.
Worked with engineers to modify designs for more efficient shop fabrication.

1977-1980
Worked right out of welding school starting1977. I worked at four different companies, mainly with defense sub-contractors. Duties included completed layout, welding and custom fabrication with metals up to ten inches thick, rolling or forming with 800 ton press breaks on items like: nose cones, rounds, wing struts for F-16's, storage silos for MX missiles and forming mandrels for nose cones that went on the boosters for the Space Shuttle.

EQUIPMENT USED 28 YEARS:
Bench type and stand-alone type drill presses capable of drilling with bits up to three inches in diameter. Bridge Port mills, lathes of 24" diameter. Press brakes, from hand operated to those with the capability of bending up to sixteen foot long flanges. All types of measuring devices such as calipers from 6" to 48", dial and veneer, and most all electric and pneumatic hand tools.

EDUCATION
Welding School certified structural steel and pipe 1978.
Attending online courses of the University of Phoenix 2001.
Attended ETSU (East Tennessee State University), working on my Engineering
Degree from 1995-1997.
Attended UT (University of Tennessee), worked toward my degree in General Engineering during 1997.

SECURITY CLEARANCE:
Top Secret issued in 1981 by Lockheed

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 3490)

Go to Search Parameters...

Brief Description

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

14 years experience combined as a mill operator and mill supervisor

Mining Engineer with 5 years mining experience

I have a National Higher Diploma in Extraction Metallurgy and currently studying towards a BSc Hons in Metallurgy at the University of Pretoria. My current tasks involve plant optimisation, risk assessments, health, safety and quality, budgetting, compilation and reviewing of work instructions.

16 YRS OF MINING operating varies types of Equipment dedicated to what I love

A dedicated heavy equipment operator with 15 years of open pit mining experience. Supervised the daily production of sand plant operations. Including the harvesting, processing and staging of open pit materials. Experience working with numerous soil types.

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

Six years of experience working for various companies in Human Resources practice!

To secure supply position-involving procurement, contracts and logistics coordination where my skills may be fully applied overseas, Africa or domestic assignments

Technical mining management professional with proven success in surface mine engineering, environmental and operations searching for a position in Operations or General Management.

I did B.Sc (Mathematics), Diploma In Mine Surveying, and Advances In Mine Surveying Technology (Indian School of Mines) . I am Using SURPAC Software From last 14 (Fourteen) Years in U/G Mine as well as in Open Pit Mine.

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

Geological exploration works including mapping, bulk sampling, drill hole planning, logging and sampling during drilling.

Geologist and mineralogist (double degree, diploma). 1 year experience in mapping, supervision (rig and camp), underground, grass root exploration and production.

I have 17 years of working experience on road construction and mining both hard rock and alluvial

Mapping of geology and structures, Preparation and assessment of geological repots, Exploration program processes, Ore reserve estimation, Sample selection and preparation for analysis, Quality Control, Liasoning work with DMG & IBM offices.

Metallurgical Accounting, Budgting, Flotation, CIP process,Gravity Concentration, Smelting, Elution, Dump Retreatment, SHE issues management, Mentoring trainees

Mechanical Engineer with hands on pit time, ready to relocate. Employeed as Maintenance Supervisor on a Surface Coal Mine. Dragline/Shovel Experience.

19 yrs of hard rock mining experience (ie: copper, gold) as well as diamond mining. Will adapt to most enviroments and willing to work overseas; will reply to all responses. Sincerley Stu Hogg

A middle management level professional having an experience of 13 years (6 years of Gulf experience) in the avenue of QA/QC in Industrial Construction

Training and trade testing of apprentices

28 years exploration experiance in Africa. Two companies Anglo American & Union Carbide. Worked in remote locations, overseeing all personal and financial matters, budget control, oversaw logistics of exploation camps, responsible for safety, health and enviroment issues, conducted training.

To work for a great company as a driller or an advisor/trainer in the mining field or similar:(Exploration or other). My experience with and knowledge of drill bits may be of significant value to your company if many of your drill bits fail prematurely from broken or missing carbides.

underground driller operater

Experienced and degree Safety Engineer. Wish to utilize experience and skills to reduce accidents, eliminate and control hazards, lower Workers Comp costs, and develop a Safe Production Program that contributes as a Profit Center.

Over 12 years of experience as research and mining engineer with experience in coalmine excavation, mine safety control, old mining area remediation, and rock mechanics. As a software engineer of AutoCAD, MDT, and GIS.

Heavy Equipment Operator

Bachelor in mining engineering

I am currently employed as a mine planning engineer. My responsibilities are preparining Life of Mine designs, schedules and plans. Make sure that all long term plans are being executed by short term planning & mine prodcution personnels. Infact I am also involve in cost analysis of pit designs.

Qualified Minerals Process Engineer and Certificate IV Workplace Trainer and Assessor with experience in coal processing, coal process plant design, training of process plant operators.

I did Master's of Geology from Banaras Hindu University with 85.4% in June, 2007. Presently working as Geologist with Australian based company called India Resources ltd. (E&P), India. Here I am doing Mine Planning and Design , Ore body Modelling of Surda Mine .

Geophysical Supervisor, logistics, drill,survey, sample supervision.

•Excellent abilities on using PLC to control the machine,and I have held the certificate of Siemens Training Center.

I have 8 years experience in a large cement plant where I was a Millwright for 6 years. I also was a leader of the Safety Committee and I have a strong knowledge of the MSHA regulations

I am a successful experienced large pulp and paper industry production supervisor with extensive knowledge working in a high paced, no errors environment. I believe my experience would transfer over well contributing to be proactive in company and personal growth.

Chartered Accountant

Geological modelling, Vulcan expert user, JORC reporting Project management Quality control, reconciliation RC/diamond/environ drilling, remote exploration Tenement applications Contract/tender documents, capital justifications Traditional Owner liaison Training indigenous people (military)

Underground and surface mine development, construction and operations. Mechanical engineering background, involved in maintenance and efficiency studies of mining equipment including excavation and haulage systems. Overseas experience.

Electrical Engineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

PhD candidate with experience in Hardrock and Softrock

eep all plant logs current, order supplies, and maintain and repair all working parts of the crusher, I maintain contact with main headquarters, and I am responsible for all aspects of tower operations and employees under my direct supervision.

I am looking for a position which carries high impact as well as new challenges.

I am a qualified chef and have been chefing for 14 years. i am interested in FIFO positions

I am a mining engineer with a strong background in geology and mineral processing. Amongst my other assets are experience with a range of software packages and strong written and verbal communication skills in multiple languages.

Worked surface mining 14 years heavy equipment

A graduate Mechanical engineer with more than three years experience in the 2.00 million tones per annum capacity copper ore beneficiation plant of M/s Hindustan Copper Limited with a present turnover of Rs. 1800 crores at Malanjkhand Copper Project

Admisnistrador de sistemas,Systems Administrator,Ingeniero de Sistemas,Systems Engineer,Ingeniero de Software,Software Engineer,Ingeniero Telecomunicaciones,Telecommunications Engineer,Project Manager

20 years overseas contracting, Mining and Construction

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out