Resume - A grade electrical licence. Underground communications. Tamrock drill equipment ...

Misco Jobs

Resume #85131

CONTACT INFORMATION:
View contact information...

Education:
2001 – 2005 College of Electrical Training Perth WA

Certificate III Electrical Mechanic
NTC 004 and NTC 111– Open Licence Communication technician

1996 – 2000 Balcatta Senior High School Perth WA

Study and completion to Year 12

Work experience:
Oct 2008 – Present Byrnecut International Kazakhstan

Position: Underground Electrician/Trainer
Electrical duties: Maintenance of primary and secondary ventilation,
Generator and compressor maintenance,
Axera 7 and Solo 7 maintenance/service,
UHF radio communications,
Flygt pump dewatering maintenance and repairs,
Underground electrical installations
HV switching/sub maintenance.
Trainer duties: Instruction on Byrnecut work procedures and safe working behaviours to national workforce,
Mentoring role to nationals,
Instruction of Byrnecut electrical standards.

Sept 2008 – Oct 2008 Byrnecut Mining Jundee WA

Position: Underground Electrician/Drill Electrician
Duties: Installation and maintenance in the Invicta Deeps mine
All services on Tamrock Axera 07
Maintaining VHF radio communications

This was a temporary placement given by Byrnecut Mining until another international role was available.

Jun 2008 – Aug 2008 Byrnecut International West Africa

Position: Underground Electrician/Trainer.
As this was a new start project I was involved in Electrical planning for the site including:
Parts and equipment ordering,
Wholesaler liaison
Electrical Mine planning
And regular duties
I was also involved with training of the national workforce to adhere to Byrnecut Work Procedures and company work and safety policies.

Due to the global economic situation at the time and the prices of zinc the project was shut down to Care and Maintenance.

May 2006 – Jun 2008 Byrnecut Mining Telfer WA

"A" Grade Electrical Mechanic.
Position: Underground Electrician.
Electrical Leading Hand for the last 8 months.
Duties include
- Installation, maintenance and fault finding of all starter boxes.
- Underground mobile plant maintenance and fault finding.
Specifically Tamrock Solo and Jumbo Drills.
- Liaising with Shift Bosses and Foremen.
- Task setting for department personnel.

2005 – 2006 KLM Group Ltd Perth WA

"A" Grade Electrical Mechanic, Communications Technician,
Position: Service Technician
Duties include
- Fault finding in commercial installations
- Make Safe and Make Good operations
- Supply and install
- Liaising with clientele
- Ordering and organisation of goods

2001 – 2005 Electrical Group Training Perth WA

"C" Grade Electrical Worker – Apprentice Electrical Mechanic
Various fields of work included
- Control gear/wiring
- Fire Detection Systems
- Commercial and Domestic installations
- Air Con installations
- Switchboard Engineering

Volunteer experience:
2002 – Present 11/28th Battalion RWAR Perth WA
Private soldier, Royal Australian Infantry Corps
The Australian Defence Force has taught me a great deal of self discipline, leadership skills and the ability to carry out tasks given to me with or without directives.
I participated in a three month deployment to Malaysia with the Australian Defence Force as a member of Rifle Company Butterworth. I am a Defence recognized Demolitions and Booby Trap Technician and also have my Defence Watermanship licence.
These exercises and deployments, as well as many others, have taught me a great deal about team work, individual ethics and self motivation.

2001 – 2004 State Emergency Service Perth WA
For the eighteen months I was in the SES I was trained in Inflatable Rescue Boat procedures, Storm Damage Assistance and Search and Rescue.

References:
Andrew Burns – Electrical Manger – Byrnecut International
Tel: +61409371932 email: andrewbu@byrnecut.com.au

Mark Binning – Electrical supervisor – Byrnecut International
Tel: +77022513751 (Kazakhstan) +61437512220 (Australia)
Mark is the Elect super at my current place of employment.

Steven Krane – Maintenance Planner – Byrnecut International
Tel: +77025584174 (Kazakhstan) +61412900953 (Australia)

Grant Miles – Foreman - Murray Engineering – +61408947049
Grant was electrical supervisor at Telfer during my employment there.

Summary of qualifications:
- "A" Grade Electrical Licence
- Open Licence Communications Technician
- High Voltage Switching
- Senior first aid

Accreditations and licenses:
Tamrock Drill Control Electrics Familiarisation Course
Remote Control Technologies Course
Security clearance:
Western Australian Police Force
Australian Defence Force

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 3493)

Go to Search Parameters...

Brief Description

Seeking challenging rewarding career opportunity with a progressive innovative company utilizing leadership and management skills

I am a recent graduate from the Haileybury School of Mines in the Mining Engineering Technician Program. I graduated with honours in August 2001

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Project Management, Supply Chain Management, Human Resources Management

Looking for Instrumentation and controls job

Consultant, Control Risks; Formerly Country Manager, Nigeria, The Olive Group, Chief of Security, diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

Structural Steel Detailer, Tekla v15, Pro Steel v17 Auctocad 2008

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Fitter / Rig Mechanic. Overseas experience FIFO, All standard and preventative mechanical maintenance on all oil & gas rig systems, Please view attach resume. Thank you Regards Neil Hopper

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Electrical Engineer and Computer Sciencer

Marine Operations, Shipping, Logistics, Port Management, Ship Agency, Representation in Ukraine at port of Berdyansk

Dear Sir, Attached please find my resume for the post of Cad Designer. I am a Mechanical Engineer and working with a leading Manufacturing company as a Cad Designer / Engineer.

SEEKING CHALENGING CARRER OPPURTUNITY IN MINING FEILD MINING EQUIPMENT,DRILLING WORKS WORK IN ANY PART OF WORLD 1ST CLASS DEGREE HOLDER DELT WITH SPONTANEOUS HEATING IN MINES

8 years of professional experience in Administration and personal assistance.

I am a qualified Metallurgy and Materials Engineer with international research and training experience. I am a person with strong organizational skills and am very confident in analyzing and solving problems with positive outcomes. My past studies in Metallurgy and Materials Technology and the resea

I am a qualified and experienced Medic or Paramedic and have vast HSE/Safety/OHS/QHSE experience and qualifications. I am also a qualified rescue technician and am very well versed in emergency co-ordinating.

Proficient in reading mechanical drawings and designing using Auto Cad, CATIA, NX-IDEAS.Strong Technical writing and presentation skills along with good hold in MS - Office.Master of Engineering (G.P.A - 10.33 out of 13)(2008- 2009)University of Windsor.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

Civil/Structural/ Architectural Designer with extensive knowledge of petrochemical and oil and gas industry. Expertise in 3d Bentley Structural and knowledgeable in Staad Pro

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Geophysicist

Mechanical Engineer, technical support

Young haul truck driver eager to get back to work, trained on both articulated & rigied frame haul trucks.

Oil & Gas Exploration Project Manager - Spring Creek, Nevada resident - Forest Service, BLM , Tribal, State & Federal liason experience

Sales, Engineering Project Manager

I am Indian national working in Saudi Arabia as secretay, i have nearly around 4 years of experience in secretary,

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

I have 3 years experience in the Design industry. I self taught myself on AutoCad and Microstation.

Ellipse Business Analysis Skills in the Area of Asset Management, Work Management, Purchasing, Warehouse, Catalogue, and others.

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Seeking Assignments with organisation of high repute in Mining industry. To be an effective member of a group of repute where I can share more knowledge and get an opportunity to develop myself.

25 years experience in Oil Field, Africa, Middle-East, and Asia

A Metallurgical Engineer with over 2 years of experience in Process management, Smelter Operations, Production planning, Quality Assurance. At present, associated with Sterlite Industries India Ltd, serving as Process Engineer- Primary Smelter with ISA smelt Technology. Expertise in handling the com

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Electrical Engineer with wireless, optical and integration expertise

Electrical Engineer with previous hands-on experience in electrical and mechanical equipment maintenance

Academic Background:M.Sc.Tech. (1987), Applied Geology, Indian School of Mines, Dhanbad, India. Expertise: Engineering Geology and Rock Mechanics in the field of rock engineering

Purchaing, Procurment, Supply Chain Management, Materails, Inventory

I have worked as a chef in extreme conditions in the past. nothing i can't handle big or small jobs.

Mechanical/Manufacturing Engineering, Project/Program Management, Supply Chain Management

Load overburden, split coal, push in a shop

A grade electrical licence. Underground communications. Tamrock drill equipment service and fault finding, Flygt pump repairs and maintenance. Ability to read and draw schematics/wiring diagrams. HV switching. Primary/secondary ventilation. Commercial electrical installations. Duty desination.

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

Hard worker pursuing a career in the mining industry. Experienced in heavy equipment repair. Mechanical aptitude and willing to learn.

I am a mine engineer.

Technical/General English Instructor. Certified. BA and MA. Employed in field since 1988. Overseas experience in Middle East and Far East including oil and gas industry.

Computer Technician

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out