Resume - Over thirty years of combined engineering and construction management experience...

Misco Jobs

Resume #85867

CONTACT INFORMATION:
View contact information...

EMPLOYMENT HISTORY:

SENIOR CONTRACT MANAGER – Fluor Corporation (Mar 2008 to May 2009) – Contract Manager for the Marine Facilities of the New Refinery Project in Al- Zour, Kuwait, an EPC contract between Kuwait National Petroleum Company (KNPC) and Hyundai Engineering and Construction Company Ltd.(HDEC) with Fluor Corporation as program project managers. Additionally acted as Procurement Material Manager at the EPC office of the project in Seoul, Korea. Management responsibilities in the development of project procurement procedures, review, processing and recommendation approvals of RFP's for prospective lump sum subcontracts and specialty procurements. Complete pre-award and post-award process and approval control. Overall procurement and subcontracting budget exceeded $850 Million USD.

CONTRACT MANAGER – ATAP International Inc ( Jun 2004 – Feb 2008) - Responsible for directing, planning and execution of all development inter-agreements, contract policy commercial procedures, contract type formation, subcontracting, bill of quantities, negotiations, bid selection and proposal evaluation reports of architectural, engineering and construction projects. Post Award project control management procedures (budgeting and payments, scheduling, RFIs, Change orders and claim control systems). Execution and administration of all project contracts for a large multi-national housing and reconstruction project inclusive of infrastructure in the Philippines under a global participation plus several planning and development projects in the Central Valley of California including Castle Air Force Base and University of California in Merced master plan. Project Budget $4 Billion USD.

PROJECT MANAGER (Engineering Manager) - (Japanese Partner: PCI International Engineering Consultants of Japan) ( Feb 1989 – Mar 2004) - Responsible for all internal engineering functions and contract management administration of outside consultants for engineering, environmental functions plus management of construction contracts related to complete infrastructure, buildings, housing and public projects development with respect to a 300 acre riverfront high-end "upscale" housing development project with a golf course and marinas. Directly in charge of the development, construction and maintenance of 350 acres of riparian mitigation inclusive of water well development and pumping stations, irrigation and natural re-vegetation. Over 2 miles of project levee enhancement construction reinforcement work above the 100 year flood zone areas in the Sacramento River including dredging, on-river and off-river marina design studies and design and construction of storm drainage pumping station and flood protection. Coordinated and implemented project EIR-EIS approvals with the County, City of West Sacramento, US Army Corps, State Lands Commission, Fish and Game, Water Quality Board, Reclamation Board and other local government authorities.

PRINCIPAL PROJECT ENGINEER - Morrison-Knudsen Company, Inc. (Jan 1986 – Nov 1988) - Responsible for engineering and management control systems for construction management services provided to the State of California for the prison and correctional facilities program during contract administration, procurement, engineering and construction phases of the Susanville and Jamestown prison centers. This project required extensive contract and subcontract administration services, bidding, award evaluation, estimating, scheduling plus the development of procedures, RFIs,change orders, claims and negotiations.

GENERAL MANAGER - TRADCO (Nov 1984 - Dec 1985) - Responsible for contract administration and management, proposal preparation and negotiations of TRADCO's operations and maintenance (Hitachi desalinization floating barges) activities in Saudi Arabia. TRADCO is a large conglomerates with over fourteen joint ventures (J.V.) engaged in diversified fields ranging from computer and telecom installation and O&M, steel fabrication, concrete and aggregate production, operations, management and spare parts technical support of refineries and industrial facilities, engineering and construction. Some of the joint ventures were Prime Computer, NESMA, TMSI Arabia (a J.V. with engineering firm Daniel,Mann, Mendhall and Johnson of U.S.A.), Hazama-Gumi and Hitachi Zosen of Japan.

PRINCIPAL CONTRACT ADMINISTRATOR - Parsons Corporation (Jun 1979 – May 1984) - Responsibilities included engineering and administration of Architect/Engineer design services (PRC Harris, London-Hague) for the preparation of engineering, procurement and construction contracts; bidding, evaluation, negotiations, pre-award and post-award engineering and construction management activities for the construction of the Port in Madinat Yanbu Al-Sinaiyah, Saudi Arabia. Projects under my personal contract administration involvement ($500 Million USD) included the supertanker port terminal and deballast facilities with two offshore Suez Class berths connected to shore by a pier and pipeway trestle servicing the Mobil/SABIC Refinery with fully automatic computerized liquid product metering and handling systems on the berths; marine craft procurement and ancillary facilities construction, containership wharves, infrastructure of port principal and administration buildings and other inter-related port navaid systems. Master Plan of Projects were performed under a multi-million dollar international environment with the participation of Fluor, Lummus and worldwide procurement representation that included dredging reclamation and port bulkhead construction with participation of firms like Fluor, Ballast-Nedam and Hyundai.

SENIOR CONTRACT ADMINISTRATOR - Morrison-Knudsen Company, Inc. (Jan 1976 - Jun 1979) - Responsible for preparation and administration of life support, catering, engineering, telecommunication, construction "Quarry and Aggregate production, Concrete and Batch Plants" and other administrative subcontracts for the construction support activities of the King Khalid Military City (KKMC) in Saudi Arabia under a one and one half billion dollar EPC contract with the U.S. Army Corps of Engineers. Contracting and Procurement services performed in compliance with FAR-DOD-DCAS-CPSR and US Procurement and Cost Accounting Regulation Standards. Construction support facilities included temporary housing for 20,000 beds, infrastructure, sanitary and sewage facilities plus permanent pre-cast and concrete batch plants and quarry development. PRINCIPAL CIVIL-STRUCTURAL ENGINEERING DEPARTMENT MANAGER (Acted as Assistant to the Engineering Manager) for the last 2 years of involvement on this project coordinating with the Architectural Department for the technical review of the permanent city infrastructure and coordination with the Delft Office.

CONSTRUCTION ENGINEER - Morrison-Knudsen Company, Inc. (Jan 1974 – Jun 1977) - Several Fixed Price Construction contracts with Metro WMATA exceeding $120 Million. Farragut Square Subway station and lines "Cut and Cover construction" servicing area near White House in Connecticut Avenue and Rock Creek twin tunnels (3 Miles) Station and shafts in Wisconsin Ave. NW Washington, D.C. Started as a field and quality control engineer working closely with the field superintendents rotating into materials, cost and scheduling engineering leading to office engineer position with project control, change order and claims responsibilities. Close out activities as project engineer for the project. Negotiations and final close out with Bechtel-WMATA. During the execution of the project I was responsible for design and administration of temporary support systems, support of excavation, tunnel mining support and TBM engineering and boring production support, concrete and formwork field support. Ensuring the projects were built in accordance with drawings and specifications, safety, quality control and within budget and schedule. Contract administration was handled in accordance with FAR-DOD for a Federal Funded Project. Supported, created, managed and settled over $12 Million in change orders and claims. Office administration responsibilities included CPM scheduling, cost control, estimating, material procurement, subcontracts, RFIs, change orders, payment billing control and claims.

FIELD ENGINEER - Greiner Company (Jan – Dec 1973) - Responsible for overseeing the field performance, quality control inspection and OSHA safety on behalf of the Owner during the reconstruction of the old "Union Train Station" and construction of the new subway station interconnection system for W.M.T.A. in Washington D.C.

PROJECT ENGINEER - Spearin, Preston and Burrows, Inc. (Jun 1971- Dec 1972) -Responsible for all engineering activities and supervision functions in the field and office for the construction of Sealand containership wharves, navaids, and piers in San Juan, Puerto Rico. The project required dredging of 1 square miles. Processing and separation of dredged materials for project future filling purposes. Over 1.5 Miles of bulkhead steel sheet piling cell installation with depths of 40 feet. Filling the sheet piling cells with natural sandy materials and final filling of over 2 square miles including sand piling consolidation for port storage paved areas. Concrete bulkhead construction for the length of the project. Concrete piling installation and foundations for gantry cranes and rail installation. Railing installation, final grading, filling and asphalt paving including all underground electrical and utilities and hook ups. Installation of bulkhead bollards and docking systems and area navigational and safety marking systems.

EDUCATION

Bachelor of Science in Civil Engineering (1971) Manhattan College, New York, N.Y.;

Master's Degree MEA of Engineering and Construction Administration (1975) The George Washington University, Washington D.C.

Master's Degree Thesis Paper Subject: Underground and Subway Systems

Viticultural and Enology Courses and over 15 years of practical experience in grape and winemaking management on an award winning former family business in California.

Over 80 hours in various Seminars sponsored courses by Government Contracting Agency in Washington DC. Courses related to Cost Control Accounting Standards, Federal Acquisition Regulations, ASPR, Claims and Change Order Management.

REGISTRATION/ASSOCIATION

Registered Licensed Professional Civil/Structural Engineer No. 7197, District of Columbia

Certified Project Execution Manager - Fluor Corporation April 2009
Certified Contracting Execution Manager - Fluor Corporation April 2009
Certified Change Management - Fluor Corporation April 2009

Certified Field Testing and Concrete Technician, Ready Mix Concrete Producers Technical Committee of Washington D.C. Metropolitan Area

Member, The American Society of Civil Engineers.

British Sub-Aqua Club Certified Ocean Diver – Red Sea Diving Club Branch

Agricultural Pesticide Application License in the State of California, since 1991

Computer literate and versed. MS Excel, Word, Mac Project, Mini-cad, Primavera Contract Management, CPM Pert and Project Control Office Management Systems.

FULLY FLUENT IN ENGLISH AND SPANISH

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 3489)

Go to Search Parameters...

Brief Description

Telecommunication, Health, Safety, Environment and Security Coordinator

Certified black hat miner with mechanical aptitude and machine operation skills.

15 years heavy equipment operation and maintenance

ASE CERTIFICATIONS: Drive Train / Engine Repair / Manual Drive Train / Axles / Suspension / Steering / Brakes / Fuel Line Distribution / Heavy / Medium Truck Technician.

Geologist

Qualifield Metallurgical Graduate with technical experience of VDC casting in aluminium industry

An mining engineering graduate from the Nagpur University of India, with 4 years experience in mining engineering.

I am former Firefighter specialist in Rescue (Confined Spaces) and Hazardous Materials.

I know I could be a good asset to your company. I have been in the commercial, industrial electrical field for 9 years. I have skills in various fields such as electronics, PLC work, carpentry, masonry, concrete work, mechanics, welding, and fabrication.

A results orientated can-doer; outstanding leader and team worker; driver and manager of change; excellent commercial acumen; highly experienced in resource sector business improvement and commercial project / supply chain management roles; MBA with Merit (Newcastle NSW). Experienced expatriate.

Red Seal/Interprovincial Journeyman Welder with B-Pressure equivalent & CWB certification

ASNT Level III, AWS SCWI, API 510, 570

Over thirty years of combined engineering and construction management experience involving supervision, design, contracting and construction, pre-award and post-award contract administration, change order and claim management, CPM Pert scheduling, cost, estimating, procurement and logistics of large

Multilingual GIS (Geogpaphic Informational Systems) professional, cartographer

Welder, Mechanic with experience in transmissions, engines and hydraulics. Also experienced in portable line boring.

Safety Professional, 30 years experience construction, minin, environmental and hazmat

Master in Machine Design engg with 6+ Yrs of Exp in design,Developement & Reverse engg of machine elements and Design Support for Onsite clients.

Caterpillar Dealership, Surface and Undergound Mining Experience.

Bachelor Degree: Chemical Process Engineering

I am an Indian Mechanical Graduate Engineer with more than six years Multi-dimensional Experience in oil & gas related projects in India & abroad.

I am a highly motivated person who is incredibly conscientious and hard working with an incredible ability to get the job done in adverse conditions and time restraints. The majority of my experience has been working on all types of heavy earthmoving equipment in a vastly changing mining environment

4 year Bachelor of Engineering Graduate Instrumentation Enginee,Automation Software Development for Three level Control System and Modeling the process for the purpose of control system design.

Qualification: B.E. (Mechanical), Diploma in International Trade. Skill: 14 Years Work experience in the field of Production, Planning & Control and Product Development

T & T Diesel Mechanic & Automotive Mechanic

Knowledge of mobile conveyor belts n components know how to run boomtrucks overhead crans ect.

7 yrs. underground mining experience including position of leadman and 5 yrs. commercial/industrial pipefitter also in the position of leadman and foreman.

I have worked in the mining industry for 20 years. I am seeking work in Australia.

Free! A recent graduate with a BSc. in Exploration and Resource Geology and an MSc. in Mining Geology looking for an opportunity to be involved in an exploration team or in mining production. I am currently based in the U.K holding a British passport and am willing to relocate to pursue an opportunity.

Underground Apprentice, Task Trained - Man Trip, Scoop, Loader, Roof Bolter

I would like a job in your beautiful state

Presently connected in an Australian firm conducting mineral exploration in the Philippines. I am a license Geologist and have been practicing the profession for more than 4 years. I was involved in Ni-Lat deposits and shifted to a more complicated and challenging tasks of Au/Cu-Au explorations.

A suitable position for a B. Tech. (Mining Machinery Specialization) Engineer, working as a Sr. Mechanical Engineer in Mines Dept. at a Cement Plant (A JV Between Zuari & Italcemeti, Italy) of 2.2 MMT Capacity in South India.

To utilize my knowledge, skills and training in the production field.

Continuous business improvements using MIMS and Cognos Business Intelligence Systems. Project Implementation Manager for the Cognos Business Intelligence System for MIMS.

Environmental Specialist and Project Manager, with over 18 years of experience in the Infrastructure developkent projects.

NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Global Sourcing, Program Management & operations management specialist with over 16 years of experience with ITES Consulting (4 years plus) & manufacturing industries (12 years. Contributed to improve profitability of various business organizations through “Spend Management” & “Supplier Relationship

Electrical Licence. C class heavy vechile licence.

777F

I can use a Bob-cat,set of torches,can weld,drive a fork-lift

Seeking Middle Level Managerial assignments in Business Development / Channel Management / Sales & Marketing with a FMCG, Automobile, Beverages oriented organization PROFESSIONAL SYNOPSIS A dynamic professional with over 4 years of rich experience in Sales & Marketing, Business Development, Chann

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Corrosion Control; AutoCAD drafting; Estimating; Material order; Microsoft Office; Mechanic and Architecture drafting;

10.5+ years experience EDP /ERP /IT Manager VB+SQL+ORACLE+FOXPRO

I & C Engineer

Electrician and Electronics Technician, with military and civilian experience

Machinist- licenced

RED SEAL certificate and CVIP endorsement HEAVY DUTY MECHANIC

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out