Resume - National Registered Construction Site Safety Technician

Misco Jobs

Resume #86381

CONTACT INFORMATION:
View contact information...

EMPLOYMENT
SENIOR HEALTH, SAFETY AND ENVIRONMENTAL MANAGER/SUPERVISOR OF LOUISIANA 2005-PRESENT
NewPark Resources/NewPark Drilling Fluids Lafayette, Louisiana
ƒò Manage and supervise approximately 130 employees and provide direction and leadership, scheduling daily activates and monitoring work performance.
ƒò Develop and implement safety procedures and policies that would prevent or correct unsafe environmental working conditions.
ƒò Responsible for maintaining all current Federal and State Health and Safety compliance records and regulations and reviewing new policies and procedures with all associates.
ƒò Dramatically reduced incident rate to below industry average by implementing a behavior-based safety system
ƒò Compile and maintain confidential personnel records including training, safety, and injury reports.
ƒò Ensure all needed safety equipment is readily available and used properly.
ƒò Supervise and train all new hire associates and perform all new hire employee orientations.
ƒò Conduct weekly and monthly meetings at all facilities.
ƒò Monitor and prevent potential workplace safety hazards by performing monthly safety audits on associates and facilities, and ensuring all facilities have accurate and up-to-date documentation of policies, procedures, and data.
ƒò Initiate and conduct employee interviews for biannual audits of Environmental Health and Safety (EH&S) protocols, policies, and programs.
ƒò Investigate accidents and injuries. Documented the injuries; perform a Root Cause Analyzes detailing the events leading to, during, and after the accident; and made recommendations to eliminate any hazards.
ƒò Conduct CPR and First Aid training to educate workers about medical protocols, laws, and practices.
ƒò Provide and presented disaster relief and emergency preparedness training and materials; covering hurricanes and evacuations procedures.
ƒò Responsible for health and safety training to ensure compliance with OSHA mandated training and company requirements.

SAFETY COORDINATOR/MEDICAL TECHNICIAN-EXXONMOBIL 1998-2005
ISC (Industrial Specialty Contractors) Baton Rouge, Louisiana
ƒò Developed and administered new safety programs and procedures.
ƒò Responsible for maintaining all current Federal and State Health and Safety compliance records and regulations and reviewing new policies and procedures with all associates.
ƒò Conducted health and safety education and training with all employees.
ƒò Performed routine safety audits and Behavior Base Awareness Observations on associates to ensure that they comply with all the mandatory safety and health regulations and company requirements.
ƒò Examined any accident or emergency situations; perform accident investigations and documentation of corrective and preventative actions taken.
ƒò Maintained confidential personnel files and safety records.
ƒò Facilitated daily and weekly safety communication meetings across the construction site.
ƒò Served as Chairman on the Site Manager/Safety Team at the ExxonMobil Complex.
ƒò Served on the corporate safety team for three consecutive years.
ƒò Reduced accident rates by implementing a behavior-based safety system.

DISPATCHER/SAFETY/MEDICAL TECHNICIAN-CHEVRON DRILLING 1996-1998
Dis/Con International Lafayette, Louisiana
ƒò Observed and enforced all Mineral Management Services, Coast Guard and OSHA regulations.
ƒò Ensured that all safety procedures are strictly followed.
ƒò Mediator that insured Chevron's safety programs and accident prevention programs were followed to maintain a safe and accident-free work environment.
ƒò Conducted daily safety and informative meetings for the benefit of associates.
ƒò Responsible for maintaining all office systems and records.
ƒò Responsible for shipping and receiving for all hazardous and non-hazardous chemicals and materials.

ELECTRICAL HEAT STRESS TECHNICIAN 1992-1995
Kelson Industrial Baton Rouge, Louisiana
ƒò Crew leader and supervisor of over 20 employees in day to day activities and monitoring work performances according to ASME codes and procedures.
ƒò Directed employees to abide by all safety, health and environmental regulation and company policies.
ƒò Responsible for the assembly of electrical consoles and equipment.

DISPATCHER/CREWMAN 1988-1992
Bariod Drilling Fluids Pecan Island, Louisiana
ƒò Responsible for all material management duties including purchasing orders and inventory control.
ƒò Familiar with DOT regulations for hazardous and non-hazardous materials and ensure that all safety procedures were followed.

PROFESSIONAL TRAINING AND CERTIFICATIONS
ƒò National Registered Construction Site Safety Technician
ƒò National Resisted Advanced Occupation Health and Safety Career Path
ƒò Emergency Medical Technician (EMT-BASIC), National Registry #B1163497
ƒò Environmental and Safety Courses - (Mineral Management, Coast Guard and OSHA)
ƒò HAZ-MAT AND HAZ-COM Training
ƒò First AID/CPR Instructor
ƒò SafeGulf/SafeLand PEC Instructor
ƒò DOT and NON-DOT Drug Screen Certified Collector
ƒò Behavioral Based Safety Process Trainer
ƒò Hazwopper and Tabletop Drills
ƒò Volunteer firefighter at LeBlanc Fire Station

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 3489)

Go to Search Parameters...

Brief Description

Geologist

Over 12 years experience in the mineral resources sector having worked in Canada, Central America, South America, and South East Asia. Wide range of experience from exploration, feasibility studies, block model wire framing, resource calculation, and open pit mine operations.

Geological Database Administrator, Exploration Geologist, 8 Years Experience in Mineral geology, Exploration & Drilling Programs, and Geological Database management. , Proficient in Acquire,MS Office,Familiar with MapInfo and Micromine. Ready to work all over the world ,Sweden Permanent Resident

My objective is to be a leader who places the safety of the worker and integrity of the company in high esteem. The value of Zero accidents and no loss time incidents affect the bottom line dramatically, in employee and company attitudes.

Technical and Business Analysis of coalmining businesses for JV/Acquisition/Development. Mining Professional and Business Manager with experience in Mine Management.

Innovative career in the field of electrical power engineering: Installation, Service and Commissioning

Intermediate ( Hyderabad) 1999 Grade “B DAE (CIVIL) SBTE.KARACHI 2003 First class B.E (CHEMICAL) DAWOOD COLLEGE OF ENGINEERING.KARACHI 2007 First class Experience in GEOTCHNICAL WORK Experience in to install the pezometers. Pumping test and proper monitoring of draw down

A proactive, versatile and committed Executive Manager with extensive experience spanning throughout the world and accustomed to project and people management, coordinating resources effectively to achieve targets often within stringent deadlines. A skilled problem-solver

I am a Post - Graduate Mineral Processing Engineer with +20 years of rich experience in the field of Beneficiation of Iron Ore -both Magnetite and Hematite , Lead ore, Zinc ore and Chromite ore and Pelletisation and Sintering of Chromite ore. Presently handling Mineral & Met.

Project Manager with 19 years of hands on Experience of Executing Green field projects of Hydro & Pyrometallurgy- Zinc, lead & Copper, Cu SX & EW, Cobalt SX &EW, Leaching & Flotation plant, Copper Smelter. Transmission lines, HT & LT motors upto 7700KW, VVVF upto 5MW, Hot & Wet ESP's.

10 years experience, design and draughtting, using autocad and microstation. Most delt with materials handling, and underground and surface steelwork.

A result oriented mining engineer with experience in open pit gold & chrome mining as well as underground asbestos mining. Has been involved in Mine Planning, Mining Projects Evaluation & Management, Production Budgeting & Control. Operations Feedback

Civil Construction Engineer

Been worked mostly in the mining company here in the Philippines as a Parts and Warehouse Incharge and just recently as a Maintenance Planner / Expediter in Barrick Kainantu Limited in Papua New Guinea and also familiar with the Parts of Sandvik Tamrock Drills and Loaders

Quality control inspector

I am a graduated of Mineral processing engineer with 5 years experience in Mineral processing engineering.

Geologist from India having a 5 years of experience in prospecting exploration. Versatile as a geologist to learn other mineral exploration skills and a Strong will to Re-locate. Kindly view my CV for more details on my capabilities, job orientations and skills.

Russian speaking geologist with an MBA in finance seeking position with an international mining company, specifically in the former USSR, in corporate planning, project management, finance or data management.

A Professional Engineer with design, sales, plant, project, and application engineering experience.

Remote Site Expert : Global Experience.

Senior Training Officer, Mechanical with 17 years of extensive knowledge and experience in all aspects of technical training. Planned, developed, designed, conducted, mechanical training programs following the approved Competence Development Programs, ensuring mechanical fitters, tradesmen and techn

Underground operator for 13 years Enjoy doing services work ..operated trucks boggers service vehicles and very competant in development charging and production charging

A hard core Mining Engineer, innovative, dynamic, 37 years experience in mining and mechanization projects in India and abroad. Green field projects – conception to completion. A powerful manager, negotiator and administrator. Worked in Coal and non-coal mines. Successfully steered profit centers,

Qualified Welder, Specialised Welding, Semi skilled Boilermaker, Line boring, Supervisor, Jnr. Plant Operator

Project Controls, Cost and Planning

I have involved in petrochemical, oil/gas, and heavy industrial projects. I have strong academic achievements, excellent interpersonal skills, and positive attitude, Commitment and desire to perform engineering design. I am also exceptionally well organized and highly motivated and able to pull toge

A Mining Engineer completing an MSc in Rock Engineering. Also in possession of a Blasting Ticket and a South African Chamber of Mines Strata Control Certificate. Have got 5 years underground mining experience

20 yrs exp in heavy equipment

chemical engineer,15years experience in copper solvent extraction& electro winning,worked 2yrs in central africa DR congo for copper & cobalt upgradation process as copper cathode & cobalt hudroxide,

Environmental geoscientist (hydrochemistry/hydrogeology) role

I have been involved in mine mobile equipment maintenance for the past 16 years. Have handled different equipment brands from Tamrock, EJC, Toro, Eimco, JCI, Rammer, Atlas Copco and Wagner load-haul-dump (LHD) and low profile trucks(LPT) to underground jumbo drilling rigs, longhole drills,rockbolter

Lead Mechanical Engineer, 17 years of experience in preparation of Specification/ Material Requisition/ Proposal/ Scope of Work; Design Basis and calculations, Technical & Cost Evaluation; Vendor Drawing Review, Static, Rotating and Material Handling Equipment and Mechanical Packages

Seeking entry level positions as project engineer, planning and operational duties. Willing to relocate

Good Surpac skill, over 3 year experience, supervision drilling campaign, geological assessment

Underground Miner Dedicated professional with a proven record of accomplishments and consistent contributions that increase efficiency and productivity. Fluent in the operation and maintenance of bolter, buggy, miner, belts, diesel scoops, jackleg drills, etc.

Skills: Shift Supervisor, Air Jumbo, Electric Hydraulic Jumbo, Remote Control Electric and Diesel Scoops, Haulage Trucks, Boart Long Hole Drilling, Blasting, Jack leg, Rock Bolting, Cavo, Timbering, Staging, Slusher, Development, Raise Mining, Mine Rescue, Fire Fighting, First Aid

Over twenty one years experience as Heavy Duty Mechanic, seventeen years with underground mining contractors. Over eleven years experience as Master Mechanic and Lead Hand.

I am a experienced industrial electrician/electrical supervisor of fifteen years. My electrical experience is in the mining and rolling mill industries. I also Possess my MSHA and West Virginia electrical certifications up to and including high voltage for underground and surface work.

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

National Registered Construction Site Safety Technician

6 years in exploration of Industrial Minerals

Quality Assurance/Quality Control, IRCA Registered Lead Auditor with over 20 years of experience

MSHA Instructor,Exp papers in KY,IL IN,Boss papers in IL

Optimization / Resource Planning / Cost Control / Quality Assurance & Control / Compliance Performance Management / Turnaround / Safety / MSHA / Reclamation / International

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Mining engineer with a diverse range of experience is seeking a technically challenging position.

I have been working in Africa for the last 6 years on managerial level in the security industry. I have the ability and experience to work in a general management position.

chemical and process engineer with mining and environmental experience

I have an extensive back ground in mining exploration. GEMCOM, SURPAC, and Mapinfo are some of the software products I have utilized in my career.

Mobile Equipment Maintenance position sought. I am a Mechanical Engineering Technologist as well as a certified Heavy Duty Mechanic with over 30 years of experience. I have excellent trouble shooting skills in hydraulics, electrical, and mechanical systems.

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out