Resume - Over (3) years practical experience in surface and underground mining environmen...

Misco Jobs

Resume #87390

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Over (3) years practical experience in surface and underground mining environments. Experienced in short-range mine planning. Knowledge in weekly and monthly production planning to ensure continuous supply of ore, optimum utilization of equipment and personnel, and meeting long-range mine plan objectives. Familiar with production scheduling and phase sequencing using Net Present Value (NPV) method. Strong interest in economic evaluation and statistical data analysis of operations for continuous improvement. Proficient in relevant mine planning and geotechnical software. Good at exploring innovative techniques to improve productivity..
------------

OBJECTIVE:

To obtain a challenging position that will allow for growth and a chance to use my knowledge and experience to add value.
------------

WORK EXPERIENCE:

Open Pit Mine Planning
Assisted in short-range mine planning meeting weekly and monthly production targets, long-range goals, and continuous supply of ore to processing plant
Estimated ore-waste tonnage inventory on a daily, weekly and monthly basis
Participated in production scheduling and phase sequencing
Assisted in maximizing mine shovels utilization through effective scheduling and digging plan
Compiled and analyzed MineStar daily production report for performance analysis and budgeting
Investigated the applicability of Aquila database information in fragmentation improvement design
Conducted time study on mine shovel and truck fleet for equipment selection and budgeting
Carried out comparative study on haulage optimization software-Talpac, FPC (by caterpillar), and actual travel times recorded by dispatch system
Worked with the dispatch department to help maximize equipment fleet
Assisted in ore-control planning using mine planning software and CAES (Computer Aided Earthmoving System)
Participated in open pit slope and waste damp design

Strip Mine Planning
Assisted in strip mine planning ensuring uniform flow of ore to crusher
Participated in dragline production scheduling and cut sequencing
Responsible for ore-waste tonnage inventory estimation on daily and weekly and monthly basis
Monitored dragline auxiliary equipment performance to ensure maximum productivity
Assisted in spoil dump design
Assisted in cost analysis and design of best reclamation plan for the affected mined-out areas

Underground Mine Planning
Assisted in short-range underground mine planning to support long-term mine objectives,
Assisted in underground cut sequencing and productivity scheduling
Participated in underground ventilation survey and design
Assisted in underground roof support design
Worked with underground geology team in carrying out underground mapping, channel sampling, and reserve estimation

Borehole Drilling and Planning
Responsible for drilling projects planning, design and performance evaluation
Responsible for drilling equipment selection and drilling contract bidding
Carried out economic evaluation on drilling projects
Conducted well logging and geological sample identification on drilled wells
Performed hydrological, geophysical site studies and supervised pumping test for pump selection and ground water modeling
------------
EDUCATION & CERTIFICATION:

2007-2009 Geological Engineering- The University of Arizona, USA
2004–2006 Mining Engineering- Pennsylvania State University, University Park, USA
1992-1997 Mining Engineering- University of Mines and Technology, Ghana
------------
PROFESSIONAL AFFILIATION

Student Member, Society for Mining Metallurgy and Exploration Inc. (SME)
Northwest Mining Association (NWMA)
Associate Member, Ghana Institution of Engineers (1999 -2004)
------------
RELEVANT MINE PLANNING SOFTWARE

AutoCAD, MineSight, Gemcon, Survcad, Runge (Talpac and XPAC), Modular Mining Dispatch System, Rocscience software, Statistical Software (Minitab, SAS), Excel Spreadsheet, Access, Crystal ball (Simulation and optimization tool for design and forecasting)

WORK HISTORY

May 2008 to September 2008 Mining Engineer (Intern), Newmont Mining Corporation, Nevada, USA
June 2007 to September 2007 Mining Engineer (Intern), CEMEX USA, Pennsylvania USA
September 1999 to August 2004 Drilling Engineer, GWCL Drilling Unit, Ghana
September 1997 to May 1999 Mining Engineer, Bonte Gold Mines, Ghana
May 1994 to September 1994 Student Trainee, Kass Quarry, Ghana
December 1992 to June 1993 Student Trainee, Ghana Goldfields, Ghana

TRAINING RECEIVED

Mine planning software (MineSight) training at Minetec, Tucson Arizona 2008, 2009
MSHA training 2008, 2007
Interpersonal skills training 2000, 2003
First Aid and CPR Certification

REFEREES

Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 3444)

Go to Search Parameters...

Brief Description

Engineering: Civil Structural Mining and Project Management

Operating zoomboom,over head cranes 20,40,80ton,loaders 644,624,544,l90,l120,packer 2,000hrs have my loader tickets and crane tickets. first aid level a cpr .

I have the energy, skills and flexible attitude to meet the requirements of a progressive company and I am more than willing to meet the challenge.

B Level welder with CWB flux core ticket, bondable, dual citizen (Canada/USA),

Senior Civil Structural PDMS AutoCAD Designer

Ky & Tenn certified Underground Mine foreman with 16 1/2 yrs experience

MBA, 100% Spanish and English.

Executive management, business development, supply chain, IT, embeded system

National certificate in machine shop engineering

Over (3) years practical experience in surface and underground mining environments. Experienced in short-range mine planning. Familiar with production scheduling and phase sequencing using Net Present Value (NPV) method. Proficient in relevant mine planning and geotechnical software.

48 years old white male and currently employed at Esayidi Further Education and Training (F.E.T.) College, Port Shepstone Campus, as a Technical trainer, Lecturer, Assessor and Moderator, DTTC Assessor and Moderator.

I am currently working as an Operations Research Officer in De Beers. I am based in its headquarters, in Johannesburg. My key responsibility is to compose optimal plans for management for mining our resources subjected to various constraints and objective functions.

Seeks a challenging management position in a Metallurgical process control, Evaluation or Re-engineering environment and related jobs, which suit my resume.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Heavy equipments mechanical engineer

State of West Virginia Asst. underground Mine Foreman 1459-A

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

Inexperienced Surface Miner, Class A CDL Truck Driver, Army Veteran, Paralegal

All duties included in miner 1 have certificates and mine safety

fast learner and holder of bachelors degree in mining engineering

An astute professional with 2 years of experience in Smelting, Project Management & Marketing.

Primavera Project Planning Mining, Oil and Gas

I am MSHA trained and have been tasked trained on all types of equipment (60 ton cranes down to 5 ton cranes, front end loaders, forklifts, man lifts, skid steers ect) I am cpr certified, I work well under pressure with short deadlines, I am very dependable am a self starter. Able to multi task hard

GIS-Geophysicist/Databse Administrator

9 Years experience in Laboratories and Fire Assay

Geotec Assistant

PIPING DESIGNER

Metallurgy engineer with experience of smelter, production (exctraction) of aluminium and production planning

8.5 years of experience in Plant layout and Piping Engineering/CAD Administration on Petrochemicals, Refineries and Mining & Metallurgy projects

Young Energetic Engineer, capable of achieving objectives, with excellent analytical and communication skills, skilled in troubleshooting, analysing faults, servicing & repairs of caterpillar machines & engines, also handled information entry & report generation, opening & closing of transactions

Mining Engineer, Open Cut, Quarry, Mine Planning, Operation of mines, dimesioning of machinery, international experience

I have five years experience in underground mining.I have worked my way from nipper to just laerning to operate bogger.Why has its taken my so long to get this far u ask?,i have taken the years of mining to understand each job disapline.To hopfully keep others & me safe and make me a better miners

A Chemical Engineer with 10 years of experience in Procurement in Oil/Gas and Minerals Industry

bio medical engineer

MCSA & CCNA Certify (System Administrator)

Senior EPC/EPCM Manager with +30 years experience of successful multi-disciplined project & program management; successfully organizing, managing and directing large mining, heavy civil and infrastructure projects

I have skill in Enghlish (reading, listining etc) and I have skill in using computer .

Maintenance Superintendent with over 20 years experience in Mining and heavy industrial workgroups, I am a compedent and efficient manager of resources and always meet my target goals. My goal is to work for a respected organisation in the mining industry which will provide both challenge and reward

Experienced oil/gas/mining/heavy civil project manager. Currently PMT Construction Manager on $8.5 billion dollar project.

Experience includes project management, construction management, geotechnical engineering, engineering design and resident engineering construction observation.

Twenty year mill experience leading crew independently in full mill operations

7 years as Mill Metallurgist, 4 years as Mill Superintendent. Daily operation problem solving for crushing, grinding, flotation and filtration. Supervising of metallurgical optimization projects. Effective writing, computer and presentation skills for production, metallurgical accounting.

Professional Engineer, computer literate, manager of several operations.

I have a diploma in Analytical Chemistry and one year's experience in a polymer manufacturing company here I offered my services as a laboratory Technician, with duties that include microbiology analysis using HPLC, free monomer analysis using GC, functional groups using IR and DMA

Project management of Mineral Exploration Operations Worldwide

Job Title : Service, Erection and Maintenance Engineer - Maintenance & Trouble shooting skills - Installation, Repair, commissioning and STart Up of Boilers. Stron Communication Skills. Training Courses

HR.Resourcing,staffing.

Materials Engineer, leader, metals/special processes expertise

I have worked at many fields, which gave me a good experience at electrical power especially at electronics &communication field. I’m qualified for bearing responsibilities, working under stress and cooperating with the team I work in. Extremely ambitious.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out