Resume - Metallurgist with heat treatment and quality control exp. as a technican.

Misco Jobs

Resume #87800

CONTACT INFORMATION:
View contact information...

Industrial Work Experience

* Currently Working FAG Bearing India Ltd., Vadodra.
* Year of Experience 3.5 years in FAG bearing India ltd. Vadodra.
* Current Position Technician
* Current CTC 2.6 lakh per annum.
* Expected CTC 3.4 lakh (Negotiable).
* Work Details

Achievement:
* Active participation during the commissioning of Roller hearth furnace.
* Introducing Carbonitriding and Bainitic process by doing little changes in Bell furnace which was design for Through hardening.
* Modifying the fixture used for making batches which help in increasing the daily production.
* Introducing compressed air for doing soot burning which increases lot of efficiency for soot burning and reduce carbon in the furnace.
* Deep study for hardening time and temp. and quenching time and temp. in order to get less ovality and distortion in the material (rings).
* Introducing compressed air in flame curtain which increase the height of flame curtain before the inlet door of hardening furnace in order to enter minimum oxygen inside the furnace which may decrease the carbon level.

I am working as Supervisor in heat treatment department we are doing heat treatment of material like BBS, High Carbon Steel, Forged Steel, Grade like EN31, SUJW220D,SAE51200, on Roller hearth furnace which is the largest and this type of only furnace in India for heat treatment in bearing company and its totally automatic furnace, its capacity is 1500kg per hour. I am handling 7 person under my observation for the loading and unloading and production related work on the furnace. I am having good knowledge of Mesh Belt furnace, Continuous Rotary, Sealed Quench F/C and Bell type furnace. In our company we are doing the process like Bainitic, Carbonitriding, Martensitic and Through hardening. And also having good knowledge of Carburizing Process and Induction Hardening. Beside this little bit of maintenance, setting the gas ratio for burners and gas setting for maintaining the carbon percentage and atmosphere control inside the furnace with less soot formation inside the furnace and good finishing of rings are under my observation. I am also supervising the weekly preventive maintenance done on the furnace. And had ability to achieve the daily production target.

Beside this Endo Gas generation is also observed and control by me, endo gas is for maintaining the atmosphere and carbon level in some of the furnace like bell and mesh belt furnace. I am having good knowledge of endo generation and its content.

Further I am having interest in quality control and having good knowledge in checking micro structure of the soft and hardened material, sample preparation for micro checking, checking hardness and stretching of the ring used for making bearing and ovality checking, stress relieving and crack testing. I had completed NDT Level-2 according to ASNT document SNT-TC-1A (2001) in UT, PT, MT, RT and even performing the tests in part time as I want to increase my knowledge in the field of quality control and analysis of material. I am also familiar with ASME Codes and Sections.

Industrial Training
I had taken my vocational training of three month in the last semester of my college form Birla Copper, Dahej(Bharuch). I am familiar with the method of extraction of copper from ores, right form the starting, raw material handling, concentrate storage yard to flash smelting furnace followed by slag cleaning furnace and than to anode furnace and lastly to refining process for anode to cathode upto getting 99.99% pure copper.

Computer Knowledge
* Operating System Windows
* Other Software MS-Office.

Educational Qualification

Examination Board / University Percentage
Diploma Metallurgy Technical Education Board.( T.E.B ) 63.42 %
S.S.C Gujarat Secondary Education Board, Gandhinagar 81.64 %

Final Year Project
Title Corrosion Prevention through Coating
Details o Types of corrosion, o Prevention from corrosion, o Coating technology, o Different types of coating, o Different types to preventive method related to corrosion.

Area of Interest
I would like to develop myself, into the areas of Heat treatment of Metals OR in
Inspection & Quality control of Product. Further I had completed certification course of NDT Level-2 according to ASNT document SNT-TC-1A (2001) in UT, PT, MT, RT
and practicing part time.

Personal Details
* Date of Birth 29th May, 1986
* Gender Male
* Marital Status Single
*

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 3489)

Go to Search Parameters...

Brief Description

Mining and petroleum engineer for 5 years, and safety researcher for mining industrials in indonesia for 2 years.

Jackleg, jumbo, mucker, production and development, all types of ground support.

Seeking assignments in sales and marketing/Business Development/Client Relationship Management with a growth oriented reputed Organization. I want to excel and grow in an organization and imbibe all the better qualities to become a member of the core team of the organization.

1.B.E. in mining engineer

I'm a metallurgical engineer seeking for a challenging position in the mining industry to further enhance skills and analytical abilities while at the same time giving value to the company of which I am working with

I was a Commissioning Engineer at the Rio Tinto Cape Lambert 80 MTPA Port Upgrade in 2008. In 2007 I was the Electrical Engineer responsible for the decommissioning of the original inloading and outloading circuit at the Dampier Port Upgrade Phase B. I excel in a team environment and have a very goo

Skills in 2D/3D modelling of Piping / Mechanical works using Autoplant Bentley 2004 & Autocad 2006

Good with Microsoft for Windows. I regard with my self as a communicator both English and Indonesia with high level motivation and self reliance and able to apply both analytical and creative solution to problem solving. Have a good educational background in operation, marketing in Banking & Export

35 years experience in open pit mining, started as operater worked my way up through the ranks to head of department mining, present employment.

Key Skills:Mine planning, Mines safety, Mines operation & management etc . Qualification : B.E. - Mining

Diesel fitter, supervisor, work shop planner

Dual Post Graduate with Mechanical + Management with 8 years of Industry Experience is looking for fresh chanllenges.

11 years experience in various projects includes design, costing, construction and control. Project support experienced working in fast-paced environmental demand strong organization, technical and interpersonal skills

Metallurgist with heat treatment and quality control exp. as a technican.

I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

Geological Mapping - surface and underground. GIS, 3D CAD/mine planning software, computer programming C, C++, Fortran. Rock Mass Stability - including mechanical and geophysical properties. Technical and business writing, public speaking, and teaching skills. Knowledge of seismic risk assessment.

SNR Supervisor & Superintendent experience currently working offshore

Able to repair and maintain the functionality of Auto/Heavy Equipment Electrical

Indonesian Citizen healthy, 32 year’s of age, Certified Welding Specialist for last of ten (10) years, GTAW-SMAW: SS,CS,Duplex SS.

Competent Mechanical Engineer currently working with ACC Ltd. HOLCIM INDIA

I am an extreamly hard working husband and father of two young children. I am looking for a company that I can start from the bottom and work my way up. Obviously I am not afraid to roll up my sleeves and jump right in!

4-years BSc. Mining Engineering, 1-year working experience in both Surface and Underground Mining Operations, basic knowlege in Surpac, Talpac, XPAC and Whittle mining softwares

5 year appreniceship as diesel mechanic. 5 years experience as engineer in British Merchant Navy .Conversant with Caterpillar, Terex, and Aveling Barford earthmoving equipment , various supervisory positions worldwide in different disiplines

I am applying as chemical engineer

Diploma in Land Surveying and have vast experience in engineering, cadastral, topographical and mine survey. I have experince using Leica instruments such as GPS System 1200 and TCR407, TC1610 total stations.Currently working as a contract surveyor at the Unki Mine Project (Anglo Platinum)

Sales & Marketing - Valve specialist

B.S. - Mining Engineering. 20+ years experience as a mining engineer and staff supervisor in open cut copper mining utilizing earth-moving, drilling, blasting, drainage maintenance, and dewatering equipment. Also have several years experience with open-cut coal mining. Willing to relocate.

Dedicated Land Professional with 29 years experience in a "Cradle to Grave" land department who works well under pressure and a deadline

Due to plant closing I am seeking new employment. I can disassemble and reassemble various types of mining equipment. Including gear cases, hydraulic components, and re-hose equipment.

Good experience in the operation of mining and quarry activities

Over thirty years milling experience, both operating and supervisory positions. Worked extensively with lead, zinc, and gold.

Piping Designer PDS CAD

I am capable to handle Administration, Partner with HR, Security, Procurement, Vendor Management, Liaison and other assigned work given by the Management.

An enthusiastic and dedicated professional with extensive experience across all areas of land surveying with exception leadership skills who is able to develop and motivate others to achieve targets.

Heavy equipment mechanic for caterpillar machines

Arc GIS mapping experience, stratigraphic cross section construction, thin section/hand sample identification, mud-logging interpretating, contour map creation, extensive structural cross-section construction, Excel Word Powerpoint proficiency, strong public speaking speaking skill

I am a qualified geological technician with 7 years mining experience both underground and on surface. I am hard working and can work independently in any condition.

Diamond driller operator/ assistant driller

Ten and half years of extensive experience in applying rotating equipments skill: the main responsibility includes EPC, estimate and procurement of equipment, technical bid evaluation, prepared purchase orders, approval of GA drawing, vendor documentation, commissioning, start-up, & trouble-shooting

Process control, flow sheet diagram, presentation, quality inspection, analysis (XRD, XRF, SEM, MALVERN)

Mine Geologist; Mapping; MineSight; MapInfo; Economic Geology; Leadership; Geostatistics; Underground; Exploration; Open Cut; Pit

Safety / MSHA instructor

I am a piping designer with 35 yrs of experience in a diverse background.

Surface Mine Engineer

30 yrs. experience in equipment maintenance, operation, and supervision. Expertise: Supervision, planning, cost control, record keeping, PM scheduling, maintenance and repair (electric, diesel, gas), Hydraulics, Pneumatics, Pump and dewatering systems, Milling.

- Over 11 years of management and supervision experience in the mining industry. - Extensive practical experience in mine planning, production optimization, cost control, and safety training. - Good communication and organization skills. - Experience in mine construction.

I am a second year MBA student at The Haas School of Business, U.C. Berkeley with experience in procurement, supply chain, logistics, project management, and consulting. I have 8 years of work experience, specially in supply chain optimization in the Latin American region.

22 years experience of which 12 years with in the oil sector where I had to Implement systems, overseeing accounting and carrying internal auditing missions, Significant experience in start up process, J.V. management, Fluent in English, French and Arabic.

Mechanical Engineer with 11 years experience. Skills on corrosion and production engineering. Corrosion engineering experience includes: chemical treatment, NDT and corrosion monitoring. Production engineering experience involves beam pumped, PCP and gas lift wells production optimization.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out