Resume - I am a fully qualified automotive electrical and mechanical engineer, i have bee...

Misco Jobs

Resume #88418

CONTACT INFORMATION:
View contact information...

PRESENT EMPLOYMENT
ips iNTERNATIONAL
Automotive lecturer/trainer
Start Date:Aug 2009
Salary:£25600
Last Employed:Maidstone Audi 2001-2007

DOB: 15 DECEMBER 1975

EDUCATION RESULTS
Angley High School GCSE Passes
Angley Road Mathematics Craft Design Realisation
Cranbrook Science Biology
Kent English Art
1987-1992 Geography Business Studies

Mid Kent College
Oakwood Park NVQ Level 1, 2, part of level 3
Maidstone Automotive mechanical
Kent and electrical engineering
1994-1996

I allso have first aid training and I am certified for confined space and escape work

Audi Technical Training College 5051 Computer Diagnostics Level 1
Wymbush Electronics level 1
Milton Keynes Electronics Level 2
2001-2007 Workshop Information (basic computer course)
Diesel Engine Management level 1 Air Conditioning Climate Control Petrol Engine Management
A3 License Technician Net work systems (can bus)
Q5 license technician 1 Assessor trainer
PAST EXPERIENCE
Tonbrige Audi/Maid stone Audi
Feb 2001-july2009
Working on the Audi brand for 6 years I have had the opportunity to gain valuable new skills on the most up to date
Diagnostic equipment and technology in the automotive industry at Audi /VW 's 8.3 million pound wymbush
Training centre in Milton Keynes. My responsibilities here are to work in a safe efficient manor and remain productive for over 85% of the day with out compromising my standards of workmanship. In my position I have to carry out self auditing to comply with current yearly Audi HSO standards, I am also responsible for my own self studies to keep up to date with new product training and technical solutions.
Brands Hatch Race Circuit
Oct 1996-Feb2001
Started as a newly qualified technician from college, employed as a number 2 mechanic working on the race school
BMW 318 and Ford Sierra Cosworth group B rally cars.
With in a year I was promoted to a number 1 position at that time I was the youngest employee to have done this I took charge of 11 single seater formula first race cars and managed new team of mechanics. During that year we rebuilt the original fleet of cars and built 11 more new cars to keep up with demand on the race school.
In my third year I gained experience working on the Yamaha and Ducati race school working on R6, R1,748, 916 and 996 race bikes my primary role was my teams safety and the smooth efficient running of the Nigel Mansell race school on an every day basis.
Running a school safely and efficiently meant that as a team we would have to carry out preventative maintenance and repair damaged cars in a high pressure environment between race schools we would also have to accurately write up to date logs on each car after they have been worked on. I was also in charge of any R&D at the brands hatch circuits and also at van dieman including the new formula audi.
At Brands Hatch I was fortunate to achieve maximum performance scores and bonus, at the end of each year of which the bonus was doubled, only being awarded to 11 people in the company which employed over 300 people in all. During my time here I was part of a team that achieved the most successful and profitable times recorded at Brands Hatch race circuit and this still hasn't been matched even today.

Sporting Classics
Sept 1994-Oct 1996
I was serving part of my apprenticeship at this time working on British classic sports cars like Aston Martin, Jaguar
MG, Triumph and Austin Healey.
My responsibilities at the time were a key and alarm code holder I would be expected to open and close the workshop every day and take phone calls.
On a day to day basis I would be doing anything from a bare shell rebuild to concourse show condition to preparing and painting body parts.

Malling Repair Services
Jan 1993-Sept 1994
I started my apprenticeship here working on every brand and type of vehicle carrying out all types of repairs and servicing.
Other experience
I have spent time working at a privately owned Ferrari workshop and I used to help out on the Formula Palmer Audi racing series. I have also worked for a Bentley /Aston Martin main dealer in kent for a short time.

HOBBIES
I enjoy a number of out of work activities including golf of which I took part in the inter lind group golf tournament held at Cranbrook golf course and we won the competition, I took part and completed the worlds largest Olympic triathlon in London in 2005 and I plan to do this event again next year, I have gym membership and carry out my training there, I also train for the London to Brighton cycle ride of which I try to do every year. I am a very keen motorcyclist and enjoy watching all forms of motor sport, I am a keen film goer and enjoy reading.

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 3443)

Go to Search Parameters...

Brief Description

Repair, replace parts, maintain equipment.

My major responsibilities are Core Photography, Core Slabbing ,Core reservation and Storage Services ,Lithology rock description ,Real time monitoring of drilling parameters, preparation of formation evaluation logs, identification and classification of samples

I have 25 years experience operating all types of heavy equipment used in mining, mass excavation construction, fine grading, and underground utililities.

A mining engg from indian school of mines, currently I am working in NMDC an iron ore company, I am in charge of operation and safety aspects in the comapny,

Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)

I have grew up around farm equipment and heavy equipment all of my life. I have worked on many pieces of heavy equipment and wish to pursue a career as a heavy equipment technician

Demonstrated expertise in the life cycle of software development. Proven success track in managing people, resources and processes within a worldwide organization while effectively building internal and external relationships. Have a credible track record in resolving customer-related issues

I have 10 months roof bolting experience, I also have opertated a Joy Miner, Scoop, Joy and Stamler Coal Haulers. I also have a certificate in Welding. I have a total of 1 year and 3 months of underground experiance.

I headed the Paloncha coal project and Jangareddygudem coal projects as Project Manager and monitored the Exploration activities of the projects and successfully and achieved the stipulated targets (Oct 2006 to 10th July 2008)

I am a Materials and Process Metallurgist,, and a Plant Metallurgist ,who have seven years experience in both gold and materials processing in Ghana.

Has the experience and skills required to manage, supervise, handle and monitor all job related aspects of Safety, Health and Environmental protection. Capable and knowledgeable in the process, development and application of different Safety measures that are vital in Offshore & Marine Safety,

Through my drilling experience with companies like Boart Longyear, Redcor drilling, SMD and Humboldt drilling and pump I have gained experience and knowledge in multiple types of drilling including RC (5.25” to 17” bits), Percussive (including directional), DTH and Wire line Coring

SAP, AutoCAD, Pro-E, ANSYS, ARENA, FMEA, DOE, Kaizen, Kanban, 5S, Six Sigma, MS-Office

Coal miner with 11 years experience

Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;

I have thirty eight (38) years in the oil and gas industry as a Landman. During my career I have worked in over thirty (30) states here in the United States. At this point in my career I would consider myself a "Senior Landman."

One year and nine months of domestic mining experience, in a open cut, shovel/truck coal operation. Experience include, long term planning, road design, dump design, Pit design, scheduling, cost estimate, pit production supervisor of Shovel P&H and O&K fleet.

Mining Engineer, Programmer, Mineral Project Evaluation, CTL and GTL Technologies

Have a broad knowledge of maintenance practices and theory in addition to a Bachelor's degree in Industrial Management and a strong desire to work in the mining industry.

I am a fully qualified automotive electrical and mechanical engineer, i have been a light vehicle mechanic for over 16 years and i would like to broaden my horizons and work overseas, i am prepared to travel any where in the world i have extensive knowledge of diesel engines, automatic transmissions

I like new challenge and gain valuable new experience to develop my skill become a potential engineer. I am very familiar to operates computer and applies field equipments. I am a hard working person and be able to work under pressure as a team or individual, a dynamic, self-motivated, have

Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Hand Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)

I would like to use the training I have acquired to become more familiar with the operation and components of operating heavy equipment, and to obtain a position in the construction industry as a certified entry level Heavy Equipment Operator.

I am very noligable in underground mining and equipment

Long Hole Diamond Core Driller

Underground mechanic and miner

Free! IT Manager with 20 years of experience in IT with 8 years of that being in a supervisory and management capacity. I have broad and varied experience in both the technical and management areas of IT.

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

A highly experienced Human Resources Practitioner with a comprehensive and strategic understanding of HRM, business and operational issues and organisational change. Able to devise and implement coherent HR strategies whilst improving internal processes and procedures within demanding environments,

8 years of experience in Mill Wright Maintenance in heavy process industries Worked in Heavy Engineering Establishments. Experience in handling Breakdown and Preventive Maintenance Work of Machine Tools. Hydraulic and Pneumatic Problems.

Mig & Stick Welder

26 years ; Contract Admin/Manager----Procurement

Graduated Professional Chemical Engineer I have many years project engineering experience and this in a number of positions and countries.

Having experienced more than 23 years at various E & I projects consist of: Construction, Pre commissioning and commissioning

Over 25 years of progressive mining industry experience with significant achievements in management of mine development, engineering and operations. Proven track record of delivering results and affecting change.

State Certified Firefighter I and II, State Certified in CPR, State Certified Hazmat 1st Responder, Experience in Heavy Machinery , MSHA certified in Surface coal mining, and MSHA certified in Underground coal mining

Surface 04 card, Equipment operator, Electrician, Control room, Foreman

Offshore Geological Specialist

20+ years of international experience in the study, process design, engg., procurement & project management & operations. Having led multifunctional teams for EPCM for hydrometallurgical( Leaching, SX-EW), benificaition & pyro( Smelter & Electro refining) for copper, Cobalt, zinc and lead metals.

Miner 2 , hard worker , can operate roof bolter , shulter car, scoop and i have completed a 16 week comon core training ,one year underground

4 years experience in the the diamond core drilling industry

Discovered 2 World Class & 2 Medium Size ore deposits - base and precious metals, gold, platinum, iron, open pit, under developed contries, Spanish, Portuguese, English, reg mining engineer & geologist USA & Brazil, Central & South America, Africa, Amazon, excellent Vice President, General Manager

Looking for challenging position in the field of Mining Geology

Albie van Zyl is a qualified and competent Diesel Mechanic, Currently working for Komatsu South Africa.

Skills: Characterization, heat treatment, basic computer work. Education :Masters in Material Science & Engineering, Bachelors in Metallurgy. Two related projects and one metallurgy internship.

I am very interested in seeking employment as a field Exploration Geologist. I have field experience including long hours in the jungle, desert and arctic that involved mapping, unit description, sample collection and claim staking. I speak Spanish.

I hold a work permit for South Africa.I have eleven (11) years experience in multidisciplinary drawing offices with Zimbabwe Alloys, BOC GASES, Manhattan mining and TMP Process Plants. My skills are in designing and drawing (for heavy engineering equipment, petro-chemical plants, production plants,

Supervisor - Mining

Mining/Mechanical Engineer with 5+ years experience, with a background in Environmental Engineering seeking employment.

Well qualified Geologist, with three years active experience in open cast mining and quarry operations, raw materials reserve exploration, estimation, mine and project planning, scheduling. Including also mobile plant allocations.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out