Resume - QualificationsI have worked in the repair related field for over 23 years. I own...

Misco Jobs

Resume #9059

CONTACT INFORMATION:
View contact information...

Objective
I would like to obtain a position working in the international market place as a mechanic or a working supervisor doing fleet maintenance, generator repair or heavy equipment repair.

Qualifications
I have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business. I worked in the shop as well as in field repairs. I have worked up on the North Slope in Alaska's oil fields doing on site repairs as well as many other sites around Alaska. I am up to date with the use of the latest diagnostic equipment scan tools and lab scopes. I have used M.P.S.I., SNAPON and O.T.C. scanners doing on board computer repairs. I have done all types of electrical repairs and extensive wiring. I am a self starter and work well without supervision. I am very accustomed to working long hours each day and working until my task is completed. I am a very good problem solver and work well under stressful conditions with others. I worked in a Kuwait in a D.S. maintenance shop for K.B.R. until March of 2004. I then transferred to Iraq to to work in the generator dept. in at Babylon. In April I was made a Forman and was then promoted to acting supervisor for all the coalition sites in June. I in this position was required to aid all the mechanics of the other sites in the repairing and the maintenance all generators as well as the ordering of required parts.

Education
I completed high school then attended Denver Institute of technology in Denver Colorado. This was a two year trade school. It was a gas and diesel technology course with heavy electrical classes. I then attended the University of Alaska; there I took many general education classes with a emphasis in math and science. I have taken numerous trade classes in computer diagnostic, air-conditioning, and fuel injection repairs as well as the use of lab scopes and scan tools. Each year I would try to take 3-5 classes in order to stay current.

Relevant Experience
I have worked as a mechanic for over 23 years. I have worked in both heavy equipment repair as well as more complicated fuel injected computer controlled systems. I have lived and worked In many remote parts of Alaska as well as Iraq and Kuwait and fully know what to expect while working in remote locations as well as other countries. I have spent a great deal on my working time a lead person at my job and have no problem interacting with others.

Work history
2-01-04 to present I went to work for KBR in Kuwait in a D.S. maintenance unit for the United States Army working on light to heavy wheeled vehicles. I did electrical repairs motor installs transmission replacements, fuel injection repairs and on board computer repairs. I was transferred to Iraq at the end of March and at that time I went to work in the generator dept as a mechanic/Forman. I maintained and repaired generators in the range of 5 kw up to 1250 kw prime power units. I order all the required parts for the dept as well as new generators. I set up a maintenance program for all seven sites in the coalition sector and assist in repairs at other locations if the mechanic at that location is unable to complete the required repair. We work on Perkins,Volvo, Cats and Cummins diesels generators.

10-01-91 to 1-31-04 I worked and owned Palmer Repair. I did light and heavy line repair work. I did all types of repairs to include fuel injection, motor replacement, transmission replacement, electrical repairs, and computer systems repairs. I worked on both gas and diesel engines minor and major repairs. I was I.M. certified to test and repair emission systems as well as air-condition repairs. I reprogrammed computers on late model trucks and cars to include both gas and diesel vehicles. I also worked on a variety of different equipment to include generators, and tractors. I have extensive experience with the use of lab scopes in the commission of derivability repairs to include power stroke diesels, 6.5 international diesels, and other manufactures to include Chevy, Dodge, Ford, and International.

02-15-89 to 9-15-91 I worked at R&R Repair in Alaska. I did all types of general repairs on both gas and diesel engines. I did all types of heating and air condition repairs. I did I.M. testing and repairs which includes fuel injection, computer diagnoses and electrical repairs. Most of the work at this shop was light line with a few transmissions and engine overhauls.

Personal information
I am 42 years of age and in very good health. I am single with no children. I like to travel, I do not smoke or use drugs of any kind.

Reference:
Will be provided.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 3489)

Go to Search Parameters...

Brief Description

Well-traveled, young and professionally experienced field geologist. Experience working closely with environmental geologist consultants during pre-feasibility exploration project. International experience with fluency in spanish. Willing to put in long days and learn new and challenging duties.

I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.

I have been mining for about 8 years now With Eroc I was on the Development Bogger Before that Barminco at Plutonic WA as a Production Driller I was even thinking of maybe working overseas if the chance comes up

US GAAP reporting manager for one of the largest oil and gas companies in Russia; 8 years experience in Pricewaterhouse Energy and Mining audit practice ACCA qualified from 1999 Have solid experience in US GAAP, IFRS, Russian statutory financial reporting, good knowledge of Russian tax

Purchasing Agent / Buyer

Qualified and Certified NCCCO Operator with all endorsements willing to travel

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

Project Manager/Manufacturing Manager/Site Safety

Senior Project Manager, Quality Manager, International experience

looking for a job as bulldozer operator or any job available such as pakar operator or even labour

Power Electrical Engineer (Power Transformer Designer)

Manage the Camp Administration,Team work skill,having attitude to manage.Result oriented & communication skills that to share to others

grade 12 with maths and science,Nqf level 2 in mettals production,over head crane licence one year plant experience at a stainless steel industry

DEGREED MECHANICAL ENGINEER - QUALITY ASSURANCE – DESIGN – SERVICE – TECHNICAL SALES

ETAP Power System, PLC, NEC, ANSI, IEEE, NEMA, IEC, electrical testing & commissioning, Over twenty (20) years of hands-on experience focusing on High Voltage (HV) and Low Voltage (LV) Power Distribution System, project management, electrical engineering design, project coordination and supervision

Master (Mechanical Engineering), Employer, Bechtel Corporation & Exxon Mobil. Experience in I & C Engineer and Mechanical Engineer

Qualified heavy diesel machanic

An experience individual with excellent knowledge of Freight handling / Exports Management with the objective of achieving organizational goals and making it a strong profit center, seeks an opportunity in managerial capacity.

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Bachelor of Electronics Engineering ,14+ yrs of experience in designing and commissioning complex programmable logic controller (PLC) based control Systems for Process and Machine automation.drawing tools like AUTOCAD, ORCAD.,SCADA Packages like Intellution-Fix32, Ellipse,

27 years in manufacturing indusrty from panel operator to operations supervisor. Currently employed as a startup and commissioning consultant.

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

Auto Cad

Bsc Geology from the university of Ghana I am currently working with Newmont Ghana gold ltd as an Ore control Geologists.I have 2 yrs experience in both MIneral Exploration and Mine gelogy.

Seventeen yrs mining exp all equipment. Specialty dragline up to and presently operating 4600 Manatowak. Eight yrs foreman-certified Ohio.

FINAL YEAR MINING ENGINEERING STUDENT, GRADUATING JULY 2002. Predicted to graduate with a first class degree from Camborne School of Mines, UK. Proven acedemic and practical ability. Practical mining experience from employment in South African mining industry.

Graduate surveying student looking for a career in mining.

HR Management, Project Management, Consultant

Having worked on projects across Canada and in Mexico, I have a diverse background in Health, Safety and Environmental issues which includes everything from full HSE Management System creation to managing all field work, investigations, HSE Compliance, training, environmental management, etc.

Mineral Engineering Technologist, 6 yrs experience with International geotechnical consulting firm, Mining Engineering Degree expected 2010

Continuous opportunity for professional development in the field of Manangement and Business Administration, Banking and Marketing as well as Procurement and Logistics.

My name is Stephen Ball and I am a Senior Mining Engineer currently working at the Varvarinskoye Mine in Northern Kazakhstan. I have been working in Kazakhstan and Russia for over 3 years now. I am looking for future opportunities in Russia, CIS and other international locations on FIFO rotations.

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

I'd like to switch careers and have a get er done attitude

I have 10+ years of geological experience undertaking mineral exploration projects for precious metals (epithermal), base metals (Porphyry and VMS), diamond (alluvial and kimberlitic) and uranium deposits (Carbonatite and unconformity related).

# Self motivated # Self challenged # Good communication skills # Open to new relationships # Computer Skills: Windows, MS office application

Chartered Accountant

I have completed my gradute in mining Engineering, having sound knowledge and experience in the field, have the interest to work in any place.

I am a young mining graduate (with first class marks) with hands on training in different mines such as manganese and coal with workable knowledge of computers.

B.tech in mining engineering. Objective To excel in the field of mining and excavation.

Seeking Office Administrator/Administration Asssistant. post -10 Years experience. University Graduate

Mechanical Engineer with solid technical and managerial experience in maintenance areas for mining and petroleum international companies. With proven leading skills oriented to implement, improve and maintain best practices to reduce and eliminate any source of loss related to safety and production

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

Licensed Professional Engineer registered in British Colombia and Alberta, and able to be registered in other Canadian, U.S. and international jurisdictions.

HR Generalist - Manual Payroll, employee Personal filing, Documentation, MOM related work, Policies & Procedure framework, Organizational Develoment, Performance evaluation & Appraisal, Issuance of Official Letters, Employee Engagement & Communication, Employee Retention, Training & Development, etc

Mechanical Engineer, Static Equipment, Pressure Vessel, Heat Exchanger, Tank

Geologist/Exploration geologist

Operations, Technical, Contract, Leadership, Surface, Underground, & International Experience

I'm Ahmed Mohammed Mousa Gaad with an Egyptian nationality working as Applications Senior Developer looking for the honor of joining an organization that has a reputation of excellence in its field such as your company.

my skills and qualification shuold be display to the employer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out