Resume - Power Electrical Engineer (Power Transformer Designer)

Misco Jobs

Resume #9407

CONTACT INFORMATION:
View contact information...

1998 - present PT. Pauwels Trafo Asia Cileungsi, Bogor -Indonesia
# Senior Electrical Design Engineer
As Electrical Design Engineer my responsibilities are covering many aspect, mainly perform detailed designing and engineering analysis of electrical and mechanical system, such as:
n Study and investigation of technical specifications n Calculations are covering; MVA net and impacts, voltage drop, efficiency, short circuit impedance, symmetrical and unsymmetrical faults current, no load and load losses characteristic, magnetic force n Determines material which is suitable against short circuit characteristicn Determines mechanical aspect such as mechanical force and creepage distance for active partn Determines earthing or grounding and impact againts of systemn Review to optimalize distance to reduce impact of creepage distancen Review breakdown and creepage distance voltagen Prepares, support technical data, and supervise measurements and tests. (impuls test, applied overvoltage test, induced overvoltage test, measurements of voltages ratio, vector group test, measurement of winding resistances and insulation resistances)n Defines the accessories of the transformer based on the specifications and correlate with other departments and design department section as: Fans, Pump, OLTC, DETC, Bushing, Protective Devices, Terminal blocks, Type of Control cabinet, Circuit Breakers, Lightning Arrester, Neutral Earthing Resistor, etc.n To support other departments such as sales, after sales, purchasing, production, and testbay for technical clarificationn Makes and Releases PR for accessories of the transformer

# Project Engineer Besides my job above, I still another job as Project Engineer and at this position my responsibilities are: n To ensure the completeness of project document n To coordinate the project (time schedule, material quality, etc) internally (with logistic, purchasing, production, finace, quality assurance and sales department) and externally (with Suppliers, Sub Contractors for materials quality and compliance)n To control the project budgetn To clarify technical question from customer n To coordinate and answer technical question from and for customern Preparing drawings required for approval to customer n Makes the transformer bookn To support technically on the after sales departmentn Ensure that all activities are performed within the requested time frameAchievements: ¨ Designed Distribution Transformer for oil and LNG company such as Petronas, RasGas, Oman LNG, Sohar Refinery, etc.¨ Designed Power Transformer for power plant such as Transend, Aurora Energy, TransPower, Medelec Switchgear, Electric Corporation Saudi Arabia, Gooder, PLN, etc.

1996 - 1997 PT. Meta Epsi Engineering Jakarta-Indonesia
#Field Construction Engineer (New Purwakarta Substasion Project - Indonesia )
Tasks & Responsibilities: n Supervised installation of 150 kV switchyard equipments such as Disconnecting Switch, Circuit Breaker, Lighting Arrester, Current Transformer, Capacitor Voltage Transformer, Power Transformern Supervised installation of 20 kV distribution system such as incoming and outgoing cubicle, Distribution Transfprmern Supervised of pulling out cables for each equipmentsn Made Transformer acceptance and initial inspection proceduresn Made battery commissioning and testing proceduresn Energized transformer and others power equipment n Perform insulation resistance test, continuity test and fuction testn Coordinate and sequence sub-contractors work and direct works to prevent delaysn Identify and record any projects' quality problemsn Initiate action to prevent the occurrence of projects' nonconformityn Control further processing of non-conforming works until the deficiency or unsatisfactory condition has been correctedAchievements: ¨ Completed New Purwakarta Substation - 150/20 kV Project within requested time frame

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 3444)

Go to Search Parameters...

Brief Description

Master's student in Geology. Thesis in igneous petrology with a heavy course load in geophysics. Experience isn Petrel, MatLab, and GIS along with several geophysical tools.

Senior Document Controller

i am a panel beater by trade wanting to take a on a new career

Extremely competent in computer applications including word-processing, database(ms access), spreadsheet, powerpoint, internet use and project management(ms project).Extensive experience of open pit operations.

OIL AND GAS (BOTH UPSTREAM & DOWNSTREAM), PETROCHEMICALS, POWER (NUCLEAR & CCGT) Pharmaceutical, STP

B.E.(Mining) & M.tech (Opencast Mining) with a First class Manager's certificate. 4+ years of Underground and opencast mining experience. Involved for Risk Management Plan preparation. Skills and abilities to be resourceful, innovative and an asset to the organization.

5 years experience in alumina industry as safety, environmental and also process senior engineer

i was in dubai for past 25 years and i moved to australia with my family on peramanent resident visa last year july.

I am Chartered Accountant and working with Al Khafji Joint Operations (Saudi Aramco Gulf Operations and Kuwait Gulf Oil Company) as Financial Analyst

Mining technician, Diploma in Mining Engineering, 6 years underground mining experience, 4 years at senior supervisory level. Currently Mine Captain responsible for development & production drilling & blasting operations, construction & capital projects. Good leadership skills. Computer literate.

A1 grade machinist working on all machines in timber indust,tool setter and sharpener m/c setter also,4 year trained app city and guild london institute, driven most front loaders but no tickets as all in saw mills when the driver was working on other m/c. also work on contract for australia post .

i have been shotcreting for one year

Bolter, forklift operator, drill fitter, deck worker, cage operator, rock breaker operator

A competent professional with around 11 years of experience in the areas of Information, Physical security, ability to design, execute, implement and impart training on security systems. Possess consultative orientation and ability to deliver a broad range of innovative and value-added services. Abi

I have operated machinery such as Komatsu Excavators and loaders, Cats, Dump Trucks, and dozers. I have done Service Crew, releif shift supervisor, Boggers both conventional and remote, and charge up

I am a B. Eng. (2002) graduate from McGill University in Mining Engineering. I have accumulated 25 months of work experience in mining related fields. I am a permanent resident of Canada. I am willing to relocate and work onshore or offshore.

Bsc (hons) Degree in Electrical Engineering form the University of Zimbabwe Graduate trainee Engineer for one year eight months with Gaths Mine.

Five years of work experience in complementing functional areas such as Design, Manufacturing, Customer Engineering and R&D at large and mid-size corporations in USA and in India providing unique flexibility and cross functional skills

5 Years with sandvik mining & construction s.a.2 Years at sandvik field services.Have been promoted as senior technician 10 months ago.qualified in the south african air force as a aircraft mechanic on the puma helicopter.i specialise in ejc 115-axera lp drill rigs.this is my passion.

Obtain a position utilizing my degree, knowledge and skills where applicable, especially in a support role in the areas of Information Technology and Systems

Mechanical and Production Engineer with 20 years of mechanical design, project engineering and management experience in England, Chile, Argentina, Peru, Cuba, Canada, USA and Australia, fully bilingual in English and Spanish.

Well versed in contracts formation and administration, project management, claims mitigation and resolution, contract negotiation, subcontractor mangement, quality assurance on major projects thoughout the world. Results-oriented, with an ability to see any assignment to successful completion.

Scoop operator, minitrack operator,some pinning experiance,utility work on the unit.

Mechanical maintenance equipment of all types

Experienced Underground Miner: Experienced in outby utility work and some roof bolting

I’m looking for a new project.

* I am a qualified Chartered Accountant (UK) a holder of Association of Chartered Certified Accountants (ACCA-UNITED KINGDOM), Association of Accounting Technicians (AAT-UNITED KINGDOM).CURRICULUM VITAE

Experienced in Fertilizer & Chemical Industry, Certified Welding Inspector in certain methods, Skilled in Mechanical Engineering, Professional Automotive Engineer, Bachelor degree and academic study for Mining & Metallurgical Engineering include training and big project with phosphate mines

Well-traveled, young and professionally experienced field geologist. Experience working closely with environmental geologist consultants during pre-feasibility exploration project. International experience with fluency in spanish. Willing to put in long days and learn new and challenging duties.

I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.

I have been mining for about 8 years now With Eroc I was on the Development Bogger Before that Barminco at Plutonic WA as a Production Driller I was even thinking of maybe working overseas if the chance comes up

US GAAP reporting manager for one of the largest oil and gas companies in Russia; 8 years experience in Pricewaterhouse Energy and Mining audit practice ACCA qualified from 1999 Have solid experience in US GAAP, IFRS, Russian statutory financial reporting, good knowledge of Russian tax

Purchasing Agent / Buyer

Qualified and Certified NCCCO Operator with all endorsements willing to travel

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

Project Manager/Manufacturing Manager/Site Safety

Senior Project Manager, Quality Manager, International experience

looking for a job as bulldozer operator or any job available such as pakar operator or even labour

Power Electrical Engineer (Power Transformer Designer)

Manage the Camp Administration,Team work skill,having attitude to manage.Result oriented & communication skills that to share to others

grade 12 with maths and science,Nqf level 2 in mettals production,over head crane licence one year plant experience at a stainless steel industry

DEGREED MECHANICAL ENGINEER - QUALITY ASSURANCE – DESIGN – SERVICE – TECHNICAL SALES

ETAP Power System, PLC, NEC, ANSI, IEEE, NEMA, IEC, electrical testing & commissioning, Over twenty (20) years of hands-on experience focusing on High Voltage (HV) and Low Voltage (LV) Power Distribution System, project management, electrical engineering design, project coordination and supervision

Master (Mechanical Engineering), Employer, Bechtel Corporation & Exxon Mobil. Experience in I & C Engineer and Mechanical Engineer

Qualified heavy diesel machanic

An experience individual with excellent knowledge of Freight handling / Exports Management with the objective of achieving organizational goals and making it a strong profit center, seeks an opportunity in managerial capacity.

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Bachelor of Electronics Engineering ,14+ yrs of experience in designing and commissioning complex programmable logic controller (PLC) based control Systems for Process and Machine automation.drawing tools like AUTOCAD, ORCAD.,SCADA Packages like Intellution-Fix32, Ellipse,

27 years in manufacturing indusrty from panel operator to operations supervisor. Currently employed as a startup and commissioning consultant.

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out