Resume - Extensive working experience in Chemical Processing, Power Generation and Oil & ...

Misco Jobs

Resume #13731

CONTACT INFORMATION:
View contact information...

BACKGROUND SUMMARY
I am a dedicated individual that works well at all levels in an organization. I am a strategic thinker who is able to resolve issues and articulate solutions. As a Mechanical Engineer I have over 22 years of management and staff level experience in project, maintenance, operations & safety management experience in chemical processing, power generation and oil & gas industries.

Currently, I am seeking a challenging position where I can utilize my Engineering and ERP skills and experience to add value to an Organization

Specific skill areas include:
- Preparation of Expenditure Proposals for new and expansion of existing plants
- Preparation of Front End Design Manual for new and expansion of existing plants
- Project Management from initial design, selection / manufacturing of equipment through to installation and commissioning
- Preparation of predictive / preventive maintenance schedule and overhauling procedures
- Investigate mechanical failure or unexpected break-down of equipment
- Training of plant operation and maintenance staff on effective use of MAXIMO
- Preparation of material, cost and timing estimates, reports and design specifications
- Procurement of material for mechanical and electrical systems
- Preparation of contract documents and evaluation of tenders for industrial construction
- Supervise and inspect the installation, modification and commissioning of mechanical systems at construction sites and industrial facilities
- Developed Site Engineering & Safety Procedures for providing necessary training to the staff
- Developed Training modules for Staff on specific plant operation & maintenance issues
- Develop and establish Warehousing and Inventory control systems

TRAININGS & COURSES
- Managing for Performance; ICI Pakistan Ltd., Karachi- 1999
- Fire & Explosion Hazards; ICI Pakistan Ltd., Lahore- 1999
- Hazard & Reliability Appreciation; ICI Pakistan Ltd., Lahore- 1999
- Discipline & Grievance Handling; ICI Pakistan Ltd., Lahore- 1998
- Introduction to ISO 9000; SYSTEMS.9000 International Training, Khewra- 1998
- Effective Time Management; ICI Pakistan Ltd., Khewra – 1997
- MAXIMO-Computerized Maint. Management Software; ICI Pak. Ltd., Khewra-1997
- Primavera- Planning Software; Pakistan Naval Engineering College, Karachi- 1996
- Re-Engineering; Pakistan Institute of Management, Karachi- 1995
- Safety, Health & Environment; ICI Pakistan Ltd., Lahore- 1993
- German Language Elementary level; Goethe- Institut, Karachi- 1983
- Maintenance Management; Petroman, Karachi- 1982
- Apprenticeship- Engine Overhauling; PIA Workshop, Karachi- 1979
- Apprenticeship- Cessna Aircrafts; Lahore Flying Club, Lahore- 1979

PROFESSIONAL EXPERIENCE
* Engineering & Erp Consultant 2003 - Present
Working as an Independent Engineering & ERP Consultant for the Oil & Gas, Chemical Processing and the Beverage Industry

* Presson- Descon Intl. Limited 2002 - 2003
A joint venture between Presson Manufacturing a Canadian company and Descon Engineering a Pakistani company responsible for EPCC projects in the Oil & Gas sectors.

Projects Manager
* Mazarani Gas Processing & Compression Project- Ppl
* Design, Fabrication & Supply Of Three Phase Separator- Bp
* Engineering & Erp Consultant 2001 - 2002
* Sap Partner Academy 2001 - 2001

Acquired comprehensive, module-specific knowledge followed by case study and certification test as a SAP R/3 Materials Management Consultant in Release 4.6B during several weeks' training.

* ICI Pakistan Limited 1988 – 2001
During my tenure at ICI I held the following positions which were attained through promotions
* Power & Services Manager- Soda Ash Business
* Contracts & Liaison Manager- Polyester Expansion Project
* Procurement Manager- Soda Ash Expansion Project
* Estimation Engineer- Refined Sodium Bi-Carbonate Project
* Construction Manager- Power Generation Project
* Design & Materials Co-Ordinator- Soda Ash Expansion Project
* Project Engineer- Polyester Expansion Project

* Crystal Chemicals Ltd. 1984 to 1988
A private limited company with an annual turnover of USD 10 million engaged in the manufacturing of Stearic Acid, Glycerin, Toilet and Laundry Soap.

Technical Manager
* National Fibres Limited 1981 to 1984
A state owned company with an annual turnover of USD 54 million, engaged in the manufacturing of 12,000 ton / annum man-made polyester staple fiber and 3000 ton / annum draw-texturized yarn

Deputy Manager (Maintenance)

EDUCATIONAL QUALIFICATIONS:
B. Sc. Mechanical Engineering 1980
SAP R/3 (4.6B) Certification 2001

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 2547)

Go to Search Parameters...

Brief Description

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Iinterested and would like to have an opportunity to work with your company, as Account Executive. I believe there would be a good fit between my skills and interests and your needs.

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.

Experienced Automation/Process Control Engineer

Tender Administrator

To secure a position a Purchasing /Buyer In your company.

Master Mariner and have experience as Senior Officer on LPG Carriers

FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

B.Tech Engineer having 2+ years of experience presently working as a planning engineer with Reliance ,Jamnagar for JERP project. Can handle softwares required for job accomplishment.

* MBA in Asset Management and Graduation in IT. * Proven ability to manage complex projects. * Building motivated teams to accomplish capital projects.

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

I am confident that my training and experience in the area of safety and health as well as international teaching and program development skills would benefit a company that is seeking to excel in this area.

CSWIP 3.1, ASNT level II in RT, UT, MT and PT, ISO 9000:2000 Lead Auditor

Construction Manager, Side Manager, Supervisor, Hydraulics Engenieer

I am an engineering graduate and i've been working as a material controller in a reputable company in qatar for two years. i am looking forward for a career growth and gain more experience. I am willing to accept any jobs which i am qualified of and my experience is necessary.

Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management

My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI

ms word,internet marketing,power point,quality control assuransce,NIM nigerian institute of management , NISLT nigerian institute of science and lab technicaince , PGD post graduate diploma in industrial chemistry , HND in polymer technology

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Project Control (Cost & Planning) with +5 years of exp

Worked in oil and gas industries for over 6 years as Planning Engineer and Project Engineer. Advance in using Primavera Project Planner Ver. 3.1. Language skills including English, Chinese, Malay and Chinese dialects. Worked in China for the last 3 years. B. Eng. from Melbourne University.

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Medic/Doctor/HSE

Supervise the execution of new 115/69/13.8kV projects (substations) from conception to completion.Design and development of all aspects of electrical system/facilities, substations and distribution

Seeking a position in Quality Control/Assurance Management where my extensive background, abilities and expertise will be used efficiently.

Demonstrated planner with diverse experience and knowledge in Airport project, Gas and Oil Projects and general MEP projects. Strong Engineering and Management background combined with certification in project management courses. Adept at learning new concepts quickly, works well under pressure

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

I am a Survey Engineer, experienced in multi disciplinary projects, with a good track record of world class projects. I am highly interested in any position with international or overseas exposures and possibility to maximize skills in Surveying, Management, acquire new ones and progress.

Dear Sir, I am a highly motivated person who works hard to accomplish my vision for the Future. The success of your company fits perfectly within my vision, and I firmly Believe I possess the tools to help your company thrive. In my most recent experience, I took on a leadership position a

I am a professionally qualified Process Engineer with experience of process and product development, as well as quality control at Energy and Telecommunication Industries. I am accomplished to multinational environment, related to process modeling, project leadership, quality control and auditing.

PGDMS from London.A+ honours in hardware engineering. C, C++. Working knowledge of microcontroller programming and hardware languages.

33 Year old Dutch national with 10 years of HDD project management in Asia, Europe and FSU, now living in China.

Chemical Engineering, Control System engineer. Pipeline operation. Catalyst

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations and maintenance supervisor or as an inspector. I have over 25 years of progressive experience in the natural gas transmission and distribution pipeline industry.

Civil engineer, project management, site management, cost estimation, Russian, English, Turkmen speaker, CIS experience, Siberia, Russia, Turkmenistan, Kazakhistan

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008.

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

Catia, Solid Works, Solid Edge, Pro/ENGINEER, Adobe, Microsoft Office ( PowerPoint, Access, Project ), Photoshop, Blue Prints, Design, Product Development, Plant Layout Strategy, Six Sigma, Lean Manufacturing, 5S, , Injection Mold Press, Class A/CDL license, Lathe, Forklift, Donkey-lift, Milling

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

Pipeline / HDD Engineer with 7 years global experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out