Resume - Talented and value driven professional with 9+ years of experience in health, sa...

Misco Jobs

Resume #16517

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS SUMMARY
Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity. An influential leader with intrinsic talent for conceptualizing and communicating vision. Developing and empowering management and employee groups, fostering cohesion for achieving common goals. Equally adept in capitalizing on interpersonal skills to create a unique blend of innovative solutions and productive conflict resolution, while thriving on opportunities to drive people, processes and technology.

AREAS OF EXPERTISE:

Hazard Analysis Risk Assessment HSE Evaluation HSE Regulatory Standard
OHSAS 18001 ISO 14001 Emergency Response Legal Compliance Audit
HSE MS / EMS HSE Engineering Root Course Analysis HSE Training
ISO 9001 HSE Audit HSE Improvement HSE Drilling Management

Mission Statement for - 4 Main Focus Areas to Enhance the HSE Performance
Provides Health, Safety and Environmental (HSE) leadership for three facilities. Implements and maintains overall programs for associate safety, environmental protection and governmental compliance to maximize the associate productivity and minimize dangers to associate health and safety to achieve customer service; and growth and profitability objectives of the organization.

Handle and lead HSE program activities to prevent accidents and pollution, eliminate safety hazards, minimize waste and assure effective communication of programs, policies and procedures for all related employee.
Facilitate and develop safety, industrial hygiene, and environmental processes in conjunction with production leadership and organization staff to positively impact the organization's performance; will encourage safe utilization of equipment and facilities.
Will utilize participative management and continuous improvement methods to improve safety and environmental performance. Will assure company regulatory compliance with all federal, state and local requirements; will deliver monthly reports to divisional and corporate management and assure all other required OSHA reporting is accomplished. Will supervise a HSE technician with responsibility for waste management, workers' compensation programs and related safety programs.

EDUCATION
* 2nd Years PhD in OSH Management ; The University of Science Malaysia (Organization Development) – December 2002 – TBD
* MASTER OF INDUSTRIAL SAFETY MANAGEMENT ; The University of Kebangsaan, Malaysia - 2002
* BECHOLAR DEGREE OF CHEMICAL ENGINEERING ; The University of Technology Malaysia (Gas Engineering - Major) – 1996
* Certified Safety Officer by NIOSH – SHO Certificate of NIOSH Examination 2002
* SPM & SRP ; Royal Military Collage - 1986-1990

EXPERIENCE
HSE Manager, Murphy Oil Co Ltd (MOCL), March 2004 – Present

KEY ACHIEVEMENT:
1. 4 Million LTI Free since March 2003 – Activites involve: Building 3 Production, Platform Installation, Vassel Activies, Aviation, Construction and Drilling
2. Achieve 5 Millioun Barrel with ZERO RTC & Recordable Cases
3. Significantly Reduction on FA & RTC Case by 50% since April 2004
4. Successfully Install 2 Platform (Production & Water Injection Platform) with ZERO LTI ~ 500K Man-hours
5. Publish HSE Monthly Bulletin – MURPHY HSE NEWS since June 2004
6. Assist Platform Construction with ISO14001 & OSHAS 18K Certification – HL Engineering at Lumut (April - November 2004)
7. Fully Implemented Health Safety Environment (HSE) Management System HSEMS on July 2004
8. Improving waste management program in all 3 drilling rig at Murphy Oil by 45% reduction in waste generation and waste segregation
9. Completed HSE Legal Regulation and Relevant Legislation Audit at all Facilities with comprehensive Action Plan assigned to monitor the compliance
Key Function
* To provide effective specialist HSE advice and assistance to line management and supervision.
* To provide a monitoring and audit function which ensures the effective implementation of MOCL HSE standards and procedures.
* To direct and coordinate the implementation of the Murphy Oil Co Ltd (MOCL), HSE Management Systems in accordance with Company Policy and the Business Plan.
* Strengthen the Relationship with Local Authorities (DOSH, DOE, AELB, Marine Dept, etc)
* Enhance the HSE Participation among all MOCL Contractors (Drilling, Vessel, Construction, etc)

OTHER ACHIEVEMENT
* Guest Speaker – International HSE Risk Management in Oil & Gas Conference - February 15 - 18, 2005 * The Hilton Hotel, Kuala Lumpur, Malaysia
* Guest Speaker - Drilling Fluids, Cuttings Management & Environmental Excellence 2005 - Introducing Oil & Gas IQ's 2nd annual drilling fluids conference in Asia
February 22 - 23, 2005 * Sheraton Imperial, Kuala Lumpur, Malaysia
* Presenter – Effective HSE and Excellent for small & marginal field in Oil & Gas Company. HSE Day Petronas Carigali, EverlyPark City Miri, December 2004
* Presenter – HSE Management System (Management Participation toward achieving excellent in HSE) – National NIOSH Conference, Sunway Hotel June 2004
HSSE Asst Manager, PEREMBA CONSTRUCTION Sdn Bhd, Jan 2003 – March 2004
Key Achievement:
1. 5 Million LTI Free for Putrajaya Persint 11 Development
2. First Malaysian Construction Company to be Certified for ISO 14001
3. Best HSE Performance Contractor by Petronas
Key Function
* Assist HSSE Manager for KLCC Private Hospital project value at RM 380 million. Ensuring all relevant permit and approval for relevant authorities. Ensuring all clients, local and other requirement are meet and comply.
* Comprehensive new HSSE approached by using little new method of science and engineering – focusing on changing of behavior & continuous education for all level.
* Emergency Response Plan (ERP) Fire Safety System Requirement –Including fire protection system, Fire drill and fire fighter in-house organization.
* HSE Department reorganization and introduce new HSE System to meet next level of excellent. Establish system to support the management goals to be industrial leader in HSE.
* ISO 14001 Auditors Team for 3 Construction Site – Putrajaya Precinct 11, Sungai Kelang Flood Mitigation Project & Shah Alam Project.
* Management Integration Team Chairman on OSH Management System to achieve OSHSAS 18001 by year 2003 end. Company is in the process of developing detail plan to establish world-class program & documentation to meat International standard.
* Establish 5 years HSE long-range plan for organization including re-organization, documentation control process, and site management and staff development.

SR. HSE ENGINERR, INTEL TECHNOLOGY (M) Sdn Bhd, Jan 2001- Dec 2002
Key Achievement:
1. LTI Yearly Reduction Rate decrees by 25% Yearly. End of Dec 2002, Intel Malaysia achieve 0.18 and been considered as World Benchmark for HSE Performance
2. Prime Minister National Award in Occupational Safety and Health – 1996 & 2001
3. Hibiscus Award – Notable Award – 2001
4. ISO 14000 – Environmental Quality Award
5. Successfully Attended 5-month work Assignment at Arizona, US for New Pentium Product Transfer as HSE representative represent Malaysia. Lead the Asia Pacific Factory to Implement Incident & Injury Free factory implementation

KEY FUNCTION
* Responsible for HSE during New Building Construction (Total 400K sf including Manufacturing floor, support area and office).
* implement 3 new HSE programs for both Malaysia and Asia Pacific (APAC). Conducted ~ 100 Session of both 3 classes and trained ~ 1600 Employee & Contractor for New Pentium 3 Startup.
* Implement the HSE Equipment Safety Program (ESO) in Malaysia & APAC Intel Factory Site with the success on signing > 450 Equipment using New ESO. ESO resulted yearly 50% reduction on equipment related incident
* Enhance the HSE Program with management participation and employee involvement. Accident Rate have reduce significantly since 1997 (Reduction > 25% every year in First Aid, Recordable Case and Lost Day Case)

* Acting as HSE Group Leader from July 1999- Jun 2001. Manager 7 Engineer from all other HSE Team including Environmental, Industrial Hygiene & Contractor Safety
* Project Leader for all Intel New Product & Technology Transfer since 1997 - Present (Pentium 1 – Pentium 4 including Xeon and Celeron) and other expansion project. Involve in as earlier as the Tender Bidding to Project Commissioning and Hand Over. Using Construction Manual Process Module to exercise the HSE expectation and requirement during Design Stage & Project Map Day.
* Chairman Committee 1st Safety Awareness Campaign in 2001 partnership with Employee and Contractor (~ 9000 Employee). Launching ceremony by Dato'Lee Lam Tye NIOSH Director
* Committee Secretary for ISO 14K 2002 and Prime Minister Award in Safety in 2001. Successfully win both awards in National Level. Co-Chair person for National Hibiscus 2001 Participation Committee. Won Notable award on National Level

HSE Engineer – INTEL CORPORATION, Chandler, AZ USA (January 97 – December 2000)
Key Achievement:
1. LTI Yearly Reduction Rate decrees by 50% Yearly. End of Dec 2000, Intel Malaysia achieves 0.24.
2. 1st Malaysia Presented in Intel Development Forum in Santa Clara, US
3. Intel Content Expert in Equipment Design Safety, Electrical Safety & Construction Safety
4. Lead Asia HSE Development Team in new product development for Pentium 3 & Celeron in China, Philippine & Costa Rica including Malaysia

Key Function
* Work assignment in Chandler Arizona – HSE Engineer
* 1st None US HSE Personal to be part of New Technology Development Team for New Product Design
* Represent HSE AZ site for Intel Yearly Development Forum
* Trained in few discipline in HSE – OSHA, NFPA, NEC by professional body
* Team members in Intel New Self Safety Assessment (SSA) Program. Develop and trained ~ 5000 personal from all level on new SSA Process. Worldwide Staff start of using New SSA Starting June 1999.

Contractor Safety Engineer, INTEL TECHNOLOGY (M) Sdn Bhd, July 1996 – January 1997)

Key Achievement:
1. 1st Factory & Company in Malaysia to conduct Comprehensive HSE Contractor Safety Passport Program. Trained and Certified ~ 5000 Contractor at Penang Free Industrial Zone – FIZ. Later the program have been adopted by NIOSH – Contractor Safety Passport
Key Function
* Establish the 1st Contractor Safety Training Program. Develop 6 Safety Training Modules (Electrical Safety, Welding Safety, Fabrication Safety, General Safety, Construction Safety and Ionizing Radiation Safety).
* Co-partner with NIOSH to establish first Penang FIZ Contractor Safety Program, YTD the program has trained > 10K Contractor thru Penang with cooperation by PSDC.
* Kick-Off the 1st Contractor Safety Training. Develop the Training Material with 6 different trades by nature of contractor work.

OVERSEA TRAINING & WORK ASSIGNMENT

* August 97 – December 97, Arizona United State
5 Month Work Assignment to US. Been trained in new HSE Management method, Incident & Injury Free Culture, Behavior Safety. Develop Training Material to suite Asia Pacific Site with addition on culture specific items. Attended Train the Trainer session with DUPONT Consultant and other Inventor of the program. Significant changes have been made to Malaysia and other Asia Pacific site to shift paradigm from existing HSE Management System to New HSE Management approached "Changing Behavior". Lead the APAC Site Implementation.

* May 99 – June 99, Makita, Philippine
Starting Road Tour on Implementing new HSE Program to Philippine. Performance system evaluation and benchmarking. Generate Long Term HSE Management Plan and presented to the Site Management for implementation. Align implementation consistency with other APAC Site on Program and expectation.

* August 99 – September 99, Santa Clara, United State
Attending Cooperate HSE Meeting. Presented paper work on "Behavior Safety – Implementation learning from APAC perspective" at Intel International IMAC Conference.
Attending ASSE Yearly Exhibition in Santa Clare. Preparation for new Pentium Development Transfer to Penang from Santa Clara. Benchmarking Overall Intel Corp HSE Performance and Gap Analysis. Presented recommendation to HSE Director for implementation.

* June 00 – July 00, Arizona, New Mexico United State & San Jose, Costa Rica
Attended Face to Face Meeting with HSE Cooperate Director. Establish 10 Years plan 2001-2010 HSE Comprehensive Plan – Main Element is Changing Behavior & Staff Engineering Competency as High Focus Area. Benchmarking Intel performance with other Company (Exxon, Dupont, Dell and Motorola) on HSE Performance.
* April 02 – April 02 – Singapore
Conducted Semiconductor Safety Evaluation on Equipment (SEMI) and conducted special Training for 60 Senior Engineer & Development Engineer from across Asia on HSE Engineer Requirement for EU and US Market. Performed Equipment evaluation on 6 Equipment Supplier base in Singapore using SEMI and EU HSE Standards. Report Assessment and recommendation to Intel Cooperate.

* July 02 – August 02, New Mexico & Arizona United State
HSE Program Manager for New Technology Development represents APAC Site. Participate in Pentium 5 Development stage and provide HSE Engineering Evaluation on process, equipment and product development stage. Experience 1K Clean Room Design and Engineering Development as part on FAB Readiness in APAC by Q2 2003

CERTIFICATIONS/QUALIFICATIONS

* Prime Minister National Award in Occupational Safety and Health – 1996 & 2001
* Hibiscus Award – Notable Award – 2001
* ISO 14000 – Environmental Quality Award
* National Prime Minister's Quality Award – 1996, 1997 & 2000
* ISO 9000 – Since 1996
* ISO 9001 – Since 1997
* ISO 14001 – Since 2003
* Lead Auditor for OHSAS 18001 – IRCA Registered
HSE Cooperate Audit - Lead Auditor, ISO 9000 Quality Systems Auditor, ISO 14000 Environmental Management Systems Lead Auditor, OSHAS 18001- Auditor & Chair Person, Electrical Safety Courses – Course Owner & Developer, Incident & Injury Free in Work Environment, OSH Management and Risk Assessment,
TRAINING
Conducted ~ 500 Hours of Various HSE Training in Safety, Environment, HSE Management, Behavior Safety, General HSE, Office Safety, Contractor & Construction Safety, and Legal & OSHA 1994 Compliance & HSE Orientation. Certified NIOSH External Course Instructor. Attending various HSE Training both in Malaysia and Oversea

Engineering Project Management Workshop, U.S. Environmental Regulations, DUPONT HSE Management Audit, Electrical Safety, Construction Safety & Project Management, Unreviewed Safety Question Determination (USQD), SEMI HSE Requirement, NFPA Code Compliance, Operational Readiness Review, Integrating ISO 9000 and ISO 14000, Performance-Based Auditing and Verification, Hazardous and Mixed Waste Processes, HAZWOPER 24-Hour Hazardous Waste Operations, Lock-Out/Tag-Out, OSHA Arsenic/Cadmium/Lead, DOE General Employee Training

Computer Skills
- Very strong computer fundamentals in both hardware and software applications
- Several years of experience in web page design
- Proficient in both Microsoft Office and Lotus Smart Suite
- Successfully operated in Windows 95, 98, ME, 2000, NT and XP
- Knowledgeable in the following software packages:
- Knowledgeable in computer hardware operation and assembly
- Several years of hands-on experience in upgrading and building computer systems

AWARDS/HONORS

* Corpate Division Excellent Award in HSE Management
* Best Site in APAC – 2000. Achieving 0.15 in Lost Day Case Injury and setting new world benchmarking in HSE
* Intel Malaysia Excellent Achievement Award (1997–2001)
* Dean List for Semester December – Master in Industrial Safety Management UKM

ASSOCIATIONS

* Institution of Occupational Safety and Health of United Kingdom (Associate Members);
* American Society of Safety Engineer ASSE Chandler, Arizona (Members);
* Malaysia National Institute of Occupational Safety & Health (Members);
* Old Putra Association – Royal Military Collage
* IRCA – OSHAS 18001 Lead Auditor
* PIMMAG Cooperate Members

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 2546)

Go to Search Parameters...

Brief Description

I prefer to work in a friendly environment and look forward to learn new knowledge & skills. Keen to learn and excel in job field to become a knowledgeable and experienced.

A skilled and dedicated Administrative Assistant with more than 15 years’ experience in the oil & gas industry; coordinating, planning and supporting daily operational and administrative function. Able to provide comprehensive support for senior and middle management.

1. Specialized in Occupational Health, Safety & Environmental Management System in Industrial Establishments & Enterprises; in Health Care Facilities and Biotechnology & Pharmaceutical Companies; 2. Expert in Risk Management & Loss Prevention and 3. Talented Trainer in Occupational Safety & Health

Industrial Electronics + Journeyman Licensed Technician coupled with 20+ years sales

As a Project/Contract Mgr, my background is in Construction. I have worked with Owners/Clients, Architects, & Engineers. I am experienced in continuous improvement in construction, process, & people mgmt. I'm experienced in business & project mgmt in small, large, & mega const. projects.

Projects Estimation Engineer

Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree.

Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement.

IT Professional seeking to apply talents toward a new challenge. Possess a unique combination of analytical & communication skills that have contributed to my effectiveness in client relationship building, needs assessments, contractual negotiations & technical project management.

Having an experience of more than 10 years in the field of project system design & execution

e-learning, instructional design, corporate training, ADDIE, CBT, WBT, ILT, Lectora, Flash, Captivate

Environmental project scientist with project management experience in the areas of oil and gas and dry cleaners. I have extensive Phase I and Phase II experience. I have a proven track record of being on time and within budget while working on multiple projects.

I am a Chemical Engr from REC Surathkal (one of India’s top 10 Engg. Colleges) and have almost 9 yrs of exp in techno-commercial management of Proposals & Projects, in multi-sectored industries (including O&G, petroleum, water, Engg. Consultancy & pipeline coating).

I have a methodical and well organized approach to work environment and have excellent interpersonal and communication skills. I can very well interface with colleagues at all levels. I have an experience with working in an integrated team environment and can deal with short time frames

Bachelor of mechanical engineering working as rotating equipment engineer for condition monitoring and predictive maintenance using vibration analysis, ODS, alignment, lube oil analysis, Thermal imaging (Thermography), videoscope, operating parameters

Twenty nine years experience in Project Management, Quality Control, Quality Assurance, Engineering, Technical Research and Development, Auditing, Vender Surveillance, Metallurgy, Welding, and Inspection.

Qualified Quantity Surveyor with experienced in Cost Planning, Estimating, Budget Control and Monitoring in building, construction and semicoductor industries.

Dynamic professional with BS in Mechanical Engineering from UCI seeking a challenging career in the oil refinery and/or power industries where technical and engineering leadership and direction are sought to execute projects from the developmental process to a finished state

construction/process plant cost estimator, certified project scheduling, projects control

I have gained in excess of twenty five years experience in the construction petrochemical industry which includes offshore and onshore oil & gas projects for such companies as Shell, Arco, McDermott, Hyundai, ConocoPhillips, Premier Oil, Saipem, Unocal and Statoil

Instrument and Electrical Technician/System Integrator with over 10 years of experience in Control Systems, MS SQL and Microsoft Office. Proficient in troubleshooting VFD’s, Process Control, HMI design, construction and troubleshooting of industrial servers and workstations/communications.

Dual Post Graduate Mechanical Engineer with 10 years of experience

M.tech graduate doing my final year in chemical engg. i am doing simulation project with the help of CFD(simulation of stirred bubble column using CFD) and i have participated the training program in Aspenplus software. i am looking a better job related to simulation and design.

Graduate with a 3 year Bcom Degree in Finance from University of South Africa.

Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor

Over 16 years of installation and troubleshooting experience within the instrumentation field in various chemical plants. Also have four years of process chemical operating, troubleshooting, and making recommendations for plant safety, quality and quantity of plant production.

I would like to express my interest in an entry level position in your Company. I completed M.Sc in Applied Geology from Jadavpur University in 2006 and now I completed my M.Tech in Mineral Exploration from Indian School of Mines University, Dhanbad and obtained first rank in M.Tech Mineral Exp

Experience in ISO 9001, ISO 17025, ISO 17799 , Good Laboratory Practices(GLP) systems. The ISO 17025 and GLP are mainly focussed on testing and clinical laboraories. Almost 7 years of experience in Qulaity Management Systems as well as and System Administration activities.

BSc degree major in computer science; currently enrolled in CAPPA level 2; strong communication and analytical skills; self-motivated and positive attitude; efficient team player.

Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer

Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

I rely on over 14-year experience in Instrumentation & Control Engineering in FEED & Detailed Design Engineering, Construction, Supervising, QA/QC, Commissioning, Testing and Maintenance of Oil & Gas (Offshore, Onshore), Refining, Petrochemical and other major projects.

I am an American, with over 27 years of experience in the Oil & Gas Industry, with 11 of those years worked internationally. Qualifications include postings at various organizations as Head of Field Operations, Construction Superintendent, Operations Specialist, and AWS Certified Welding Inspector.

30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.

Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,

Technical, Managment, communication. Skills

Field/Kind/Skill: Accounting, Financ Statement, Tax, Information Manufacture System; Microsoft Word, Excel, Power Point, Access:Visio, Adobe Photoshop, Web Design, SPSS; SAP Business One, Daceasy Accounting & Payroll: Internet

Operations Manager; Telecommunications; Administrative; Business Development

I am qualified to work as an analyst, appraiser or consultant. Would welcome assignments in operations research, finance, market research, data processing and related areas.

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.

My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

Expert in alingment of all kinds of equipment

Contracts Engineer

I have eight solid years of experience in various Production Operations positions in Shell Gabon. the positions that I have held required leadership skills, excellent team working spirit and good communication skills which I firmly believe to be most valuable attributes.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out