Resume - Production Manager, Process Engineer, Project Engineer, Metallurgist

Misco Jobs

Resume #19486

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
Production Manager
Process Engineer
Project Engineer
Metallurgist
US CITIZEN
Professional Engineer registered in Alberta, Canada ~ 708-426-3990

EDUCATION
Bachelor of Engineering (Metallurgical), McMaster University, Hamilton, ON, Canada
Natural Gas Processing (Grad Chemical Eng. Course), University of Calgary, Calgary, AB, Canada
MBA Course Work, Laurentian University, Sudbury, ON, Canada

EMPLOYMENT HISTORY
PARTNERS PERSONNEL SERVICES 2004 – Present
2914 Nameoki Road, Granite City, Illinois, 62040, 618-451-9145
Quality Control Engineer (Temporary under Contract)
- Assisted a steel foundry's Quality Control Dept reduce the plant's scrap rate.
- Analyzed scrap defects to determine cause and solution. Maintain data-base. Look for trends.

BIG RIVER ZINC COMPANY 2003-2004
2401 Mississippi Ave, Sauget, Illinois 62201 618-274-5000
Production Supervisor (Temporary under Contract)
- Responsible for operations, safety and shift management of the electrolysis department. Managed around 20 unionized employees on the 2nd and 3rd Shift.
- Solved production problems.

THE DOE RUN COMPANY 1999 - 2003
HC 1 Box 1359, Boss, Missouri 65440 573-626-4813
Smelter Metallurgist (Lead-Acid Battery Recycling Division, Boss, MO), 2001-2003
- Technical assistant for operation of blast furnace, reverberatory furnace, refinery, battery desulfurization unit, and wastewater treatment plant.
- ISO 9001-2000 Certified Internal Auditor.
Hydrometallurgist (Mining and Milling Division, Viburnum, MO), 1999-2001
- Technical consultant to international smelters for the Engitec Flubor Process.
- Solved leaching and electrolysis problems during start up and operation of pilot plant. The pilot plant proved the technical and economical viability of the Engitec "Flubor ® Process". The process is the world's first electrowinning lead process.

ASARCO (Encycle) 1995 - 1999
5500 Up River Road, Corpus Christi, Texas 78407 361-289-0300
Facility Manager
- Operations Manager for 3 departments (half of the plant) of a unionized plant.
- Started up a new operational department: revised the process for greater safety; authored the operating instructions; initiated process improvements.
- Achieved higher sustained production by initiating process improvements. The feeds were highly variable, corrosive, caustic, pyrrophoric.

ZINC CORPORATION OF AMERICA 1989 - 1995
P.O. Box 579, Bartlesville, Oklahoma 74005 918-336-7100

Technical Manager
- Retained by senior management during temporary and permanent plant closure. Was a key employee for re-opening the plant under the electrolytic zinc or other novel metallurgical process. Produced feasibility and environmental studies. Operated the chemical laboratory.
- Conference presentations to Canadian and American Zinc Producers Association.
Superintendent of Hydrometallurgy
- Reversed profit-losing situation by solving problems in process chemistry, long-term maintenance, and supervisory and union personnel issues.
- Set several production records for zinc and cadmium tonnage.
- Managed an 80-employee operations department.
Process Engineer
- Technical representative for ZCA. Evaluated Mitsui zinc powder manufacturing technology used in alkaline batteries. The evaluation resulted in a new, jointly owned ZCA-Mitsui plant built in USA in 1996.

NATIONAL LINEN 1986 - 1989
1828 Evans Avenue, Fort Myers, Florida 33901 813-768-0483
Operations Supervisor
- As first line supervisor managed 15 + people in this industrial laundry.

SELF-EMPLOYED CONTRACTOR 1984 - 1986
Red Deer, AB, Canada
Contractor

NOVA CHEMICALS CORPORATION 1980 - 1984
Joffre, Alberta T4N 1V1, 403-314-8611
Project Engineer
- Coordinated the design and installation of a compressor station and Waste Water Treatment effluent diffuser.
- Novacor's representative for the architectural/engineering design of the head office.
- Audited the plant's mechanical integrity to prevent a vapor cloud release.

NORANDA-FALCONBRIDGE-TEXASGULF 1975 - 1980
Timmins, Ontario, P4N, Canada 705-235-8121
Development Engineer
- Co-invented the Zinc Arsenate Process, (still in use after 25 years)
- Designed and commissioned the plant.

ATLAS STEELS 1974 - 1975
1 Center Street, Welland Ontario, Canada L3B 5R7 905-735-5661
Metallurgist
- Physical metallurgist in the rod mill.

LICENSES AND TRAINING
- ISO 9001 – 2000 Certified Internal Auditor
- Recently I have undergone a US government background check as my son is completing his Top Security Clearance for the US Air Force
- Computer skills: Excel, Word, PowerPoint, Access
- HAZMAT 40 hour training, with current annual HAZWOPER training
- Operated: AA & DR Spectro-photometer, wet chemistry, Low Alpha Radiation Detector
- Fluent in Polish. Understand some Russian and French.

PATENTS
Co-Invented the process: The Recovery of Arsenic as Zinc Arsenate and its Utilization in the Purification of Zinc Plant Electrolytes. U.S. Patent 4,240,826

Through my research contributions the Doe Run Company obtained a larger ownership of the patent rights to the Engitec Flubor ® Process.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 2287)

Go to Search Parameters...

Brief Description

piping design, supervision on large projects, estimating/cost and budget control

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

A highly educated and experienced project controls specialist looking for a position in project controls, planning and scheduling and cost estimating

Passionate, experienced and Qualified. Development and implementation of safety management systems. Skilled investigator with anlytical skills to achieve preventative outcomes. Behavoural management specialist with a hands on approach and background.

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Sr. Project Controls Specialist

Chem. Eng from U.D USA. Worked overseas, in plant star up, commisioning, debotlenecking, in all on surface areas of the oil and gas industry. Exposure to Asset Management, Process and Production, Technical and Economical Project Evaluation, HSE and ISO's, Instructor and mentor of new engineers

Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

Techno - commercial Professional, Service Planner with 4+ years of experience in Oilfield Services, Currently working with Leading Multi national Service company.

Night Drilling Supervisor

Production Manager, Process Engineer, Project Engineer, Metallurgist

Seeking an analyst position. Highly innovative graduated offering more than 2 years in business and credit analyst experience and a proven ability to go beyond expectations. Willing to travel and relocate

34 years in instrumentation industry.

Construction management, real estate development, heavy industrial construction, construction claims, cpm scheduling, fluent spanish, mining construction

Overall manager for M&E services on a large high school, including 2 boiler houses, heating, hot and cold water, gas, electrical & electronics, and directional drilling.

Bachelor of Chemical Engineering and Bachelor of Geology degrees, over 10 years field experience in the oil /gas industry around the world. Worked offshore and onshore. Valid IADC Supervisors Wellcap certificate. Vaild OPITO offshore card.

Hazardous waste management,remediation, monitoring, modeling, pollution control, risk assessment, air toxics, regulations, project management

I am a Chemical Engineer, a (PE) Professional Engineer in Texas, (CSP) Certified Safety Professional and professional member of (ASSE) and (AICHE). Skills; Safety & Process Safety Management, auditing, incident investigation, risk analysis, training, behavior management

Oil, Gas, Chemical, Water Treatment. Senior Project Mgr. Flow Measurement Specialist, Adult Education Instructor,Assessor, Competency Assessment System Construction & Audit, ISO9000,More than 35 years Experience throughout 52 countries

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

Over 30 years of experience in the areas of QA/QC OBJECTIVE: A full-time position in Quality Assurance/ Contractor Coordinator/Construction Management.

A HIGHLY MOTIVATED AND COMPETENT MULTIDISCIPLINE ENGINEER with extensive hands-on experience in Offshore Oil and Gas projects and Power projects in India/ Malaysia/ Korea/ Brunei/ Singapore, who has developed:

Mechanical / Project /Construction & Commissioning Engineer/Manager BSc Hons.

With my solid background, in both finance and systems I am well positioned to address and implement systems control for all data maintainance. Having a proper understanding in the transfer of information of sub to general-ledger, using JDEdwards, I have the ability to extract and design reports.

Aconex system user for Management on Line in Dubai Metro Project, 2. Health & Safety Environment (HSE Management), 3. Construction Management, 4. Computer software (Microsoft office& AutoCAD).

As an, QC/ R&D Professional in Laboratory & Process areas with 17Yrs of Extensive experience in Plant operation, Chemical analysis by classical & instrumental methods in chemical, cement ,Ores , minerals, Ceramics Refractories & Metal industries ,wishing to work with the professional

Results-driven business/systems analyst with 10 years of diversified experience in the successful identification and management of high-level business development strategies and large-scale IT solutions with extensive expertise in developing critical design requirements and functional specifications

Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc

AT PRESENT I AM ON THE VACATION FROM PETROKEMYA (SABIC)KSA AND WORKING FOR ARCHIRODON CONSTRUCTION OVERSEAS CO.S.A IN DOHA -QATAR ON THE VISITING BASIS AND ASSIGNED AS PROJECT INCHARGE FOR THEIR ON GOING QATOFIN MARINE PROJECT DOHA-STATE OF QATAR.

Dear Sirs, i want to find any job possibilities with your company

Technical manager of Construction & Services Companies - Manages all the company activities, adiministratives excluded.

Graduate Civil Engineer with 13 years of experience in construction and Readymix concrete

Comfortable to work as Research Executive, System Analyst, Training Coordinator, Admin Officer

I am a safety practitioner with wide experience in construction, mining, dredging and marine, onshore drilling, etc. I have a good knowledge in MS Word, MS Excel and MS Powerpoint.

Materialsman/Coordinator with 10 year experiance of oil field, Supply base, Offshore Rig and Land Rigs

Procurement / Logistic Supply Chain Consultant

Professional 15 years experience in geotech and geology with engineering consultancy and construction company with various responsible position.

I have vast experience in pipeline inspection involving smart pig, pipeline cleaning, coating. Also, i have experiences in commisioning/decommisioning of pipelines and other engineering maintenance activities relating to static equipment. I am very conversant with Microsoft office and HSE standards.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Seeking Managerial or Supervisory position in Logistics & Transportation.

Checkout, Startup Commissioning I&C

Bachelor in Engg. working As Quality Assurance Engg In A korean MNC for Mobile manufacturing having 3 year experiance, ISO, Six Sigma, SPC, Training, MIS, Quality Operation

An Electrical Engineer with over 17 years of versatile experience in the field of Proposals, Contract Management/ Co-ordination, Marketing with sufficient exposure to ISO 9001 quality standards and Total Quality Management. Have undergone skill enhancement courses at IIT & IIM.

Achievement & result oriented with excellent communication, presentation & Interpersonal Skills.

49CFR HAZMAT Technical Trans (D.OT., ADR, RID, IATA, IMDG); HAZCOM (1910.1200)

23 Years of Various field of accounting

Director

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out