Resume - Sr. EHS Manager Professional, 20+ years

Misco Jobs

Resume #19535

CONTACT INFORMATION:
View contact information...

Senior Environmental, Health and Safety Management Professional
EHS position where I can use my problem solving and analytical skills and experience in metals, plastics, and paper manufacturing environments to drive an increase in employee productivity and profitability through engagement in the reduction of workplace incident risk and improvement in environmental performance and stewardship

PROFESSIONAL EXPERIENCE

Senior EHS Consultant, ALCOA EHS Services North America
2003 to 2005
* Facilitated optimization of EHS staffing at 45 plants by implementing a regional internal consulting organization which improved performance on EHS audits and significantly reduced costs associated with personnel, training, and outside contractors.
* Identified, managed and provided technical support and direction for outside contracted services including remediation and acquisition/divestiture assessments.
* Completed EHS management system development, internal auditing, and air/water/waste permitting and compliance assurance projects.
* Customized and facilitated deployment of EHS programs and training throughout the region.
* Assigned by corporate to direct the research and evaluation of Alcoa global EHS information systems, identifying over $23 million in inefficiencies. Benchmarked and developed corporate target condition and action plan for synchronizing EHS systems with those for corporate finance, procurement and HR to minimize costs, while simplifying and increasing effectiveness.

EHS Manager, ALCOA Closure Systems International (CSI) North America
1997 to 2003
Full accountability for directing EHS initiatives at 10 manufacturing locations in the US, Mexico, Costa Rica, and Germany, and provided EHS technical consulting for 12 global locations in Europe, Asia, and Middle East manufacturing plastic and metal closures and capping equipment.
* Managed and evaluated EHS acquisition/divestiture assessments for all global plant start-ups.
* Directed remediation of historical contamination at two manufacturing sites, minimizing regulatory and financial liability while maintaining Alcoa global benchmark standards for environmental and community health protection.
* Implemented EHS program and training initiatives that continued to drive down incident rates while the business unit doubled its size in five years.
* Oversaw staff of 6 at regional plants and initiated a decentralized matrix organization to minimize headcount while attracting, developing, and retaining talent.
* Designed internal website and automated EHS database reports to minimize resources for performance monitoring and encourage rapid sharing of best practices.
* Developed and deployed systems to all CSI global locations for measuring and improving performance in machine guarding, ergonomics, noise control, risk identification and elimination, EHS internal auditing, and ISO 14001/OHSAS 18001 compatible EHS management systems.
* Initiated and maintained travel security training and alert system for the 15 countries represented in this business unit.

Environmental Manager, ALCOA CSI US and
EHS Manager, Richmond, IN metal closures
1995 – 1997
* Established environmental network for technical support between plants in US and Mexico which increased internal environmental audit performance by 30%.
* Directly responsible for Richmond facility management & training programs for air, water, waste, TSCA, and FDA in a union manufacturing environment.
* Supervised safety technician for incident prevention and investigation processes, safety training and program development.

Environmental Engineering Supervisor
1991 – 1995
Managed all aspects of the ALCOA Warrick Operations' air and water environmental programs at the Newburgh, IN complex which included coal mining, power generation, aluminum smelting, recycling, ingot casting, rolling, and surface coating processes.
* Supervised staff of 8 technical and administrative personnel responsible for wastewater treatment plant engineering and control, NPDES permitting and monitoring, air emissions and ambient monitoring and reporting, and pollution prevention programs.
* Personally responsible for all air permitting and participation in Indiana and Federal regulatory development affecting air and water compliance programs.
* Developed and negotiated major NSR, PSD, and NESHAPS air permits for new surface coating lines, ingot casting operations, and natural gas cofire in a 750 MW coal-burning power plant. Successfully managed administrative challenges to regulatory and permitting actions.
* Participated in writing state regulations for coal sampling and analysis and obtained approval to use real-time nuclear analyzer to drive coal-blending facility, reducing fuel costs by $500,000 per year and improving environmental compliance.

Staff Environmental Engineer
1990 – 1991
ALCOA Warrick Operations air and water compliance programs

Senior Environmental Engineer
1987 – 1990
ALCOA Warrick Operations air compliance programs. Expanded ambient air monitoring network to sample for sulfur dioxide, ozone, suspended particulate and meteorological data to support air-permitting activities.

Environmental Scientist
1984 – 1987
* Managed environmental R&D projects at ALCOA's Technical Center near Pittsburgh, PA.
* Developed air emission sampling techniques to obtain VOC compliance data for cyclical manufacturing processes.
* Designed waste treatment methods for new waste streams and applied for patents on new treatments to meet increasing regulatory requirements for existing byproducts.
* Deployed statistical sampling process for characterizing ALCOA US manufacturing waste streams for the development of recycling and pollution prevention programs

EDUCATION

Masters Degree in Chemical Engineering, 1984, University of Kentucky
Concentration in environmental engineering. EPA-supported thesis project optimizing selective hydroxide and sulfide precipitation of mixed heavy metal wastewaters and sludge stability.

Bachelors Degree in Chemical Engineering, 1982, University of Kentucky
Honors program

MBA Coursework at University of Pittsburgh and University of Evansville 1985-88

Conversational in Spanish

LICENSES

Professional Engineer in Indiana

PROFESSIONAL ASSOCIATIONS

American Institute of Chemical Engineers (AIChE) – Environmental and Process Safety Divisions

Chairman, Environmental Policy Committee – Indiana Manufacturers Association 1994-1998

Member of Indiana Environmental Quality Service Council – appointed by Governor for 1995-1997

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 2275)

Go to Search Parameters...

Brief Description

Dynamic and Highly effective results-oriented leader, Resourceful problem-solver enjoys multi-tasking in high stress, fast paced environments and has proven track record of meeting quotas and deadlines, Safety Oriented, writes safety training programs and supervises all aspects of training.

Program Deputy Manager

33 years Mechanical & Civil Exp in QA/QC & Construction Management form$65.Million to $3.2 Million Projects. EXP. All Codes , ASME, B31.1 B31.3 AWS, , NBIC, ASME Sec.V, ASME Sec.VIII API-650 &653. Develope & writing QA/QC Programs, Site procedures Manuals, Project exection plans & Welding plans

Bilingual; Work indepenently; Hardworker; Computer profficient;Honest; Reliable

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

Experienced in managing and administering the total procurement cycle from pre-qualification to closeout of purchase orders and sub contracts for power generation facilities under turnkey (EPC) contracts as well as defense contractors and telecommunication industries. Experienced in Primivera Exped

Planning / Project Controls Manager , PMP certification, Primavera 3.1 / 6 professional user, Civil Engineer, Cost Control and Claims experience

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

Project management, commercial management quantity surveying

Automation/Electrical/Instrumentation/Supervisor

Consultant, Project Management, Mechanical, Marine Engineering, HSE and Quality.

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

EDP Data Management and System Analyst

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Me last job in Ecuador was inspector special points , by 18 months

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

B.Sc., industrial Engineering with 10 years experince. in project organization , planning and control, contractor for the construction and utility project, line production planning and control. Quality control and assurance, maintenance, system analysis and inventory control.•gripe with relevant int

B.S. Industrial technology from Ball State University. DCS training at Honeywell Automation College. Took 2 graduate school classes in pursuit of a Master's in Business Administration. 3 Years of refinery experience. Experience as an Operator, DCS Specialist, Project Management and Safety Audits.

11 years of experience in the Oil & Gas, Carried out various endeavours including feasibility study, basic engineering, detailed engineering, construction engineering and the supervision of yard construction and offshore installation.

B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.

Drilling professional for 20+ years; extensive international well construction supervisory experience; directional, drilling engineering and management experience; drilling project manager of China’s first horizontal multilateral CBM well.

Telecommunications Engineer, with Bsc. In Telecommunications and Electronics, present occupation on Telecommunications Network Resource Management, Planning & Design Telecommunication Circuits Serving Electrical Networks. Consultant Engineer: Alarabi Engineering Consultants.

Senior Electrical Engineer with over 20 years of manufacturing, industrial, chemical, and power plant field experience.

Secure a challenging engineering position where my team player attributes, experience, and communication skills can be utilized in obtaining personal career goals and those of the employer

My experience is mainly on industrial, oil & gas, petrochemical and infrastructure projects in India and Saudi Arabia. My qualification is a Masters degree in Construction Engineering & Management and i have for over 10 years of experience working on projects with multi-national companies.

• High financial and numeric ability, establishment of policies and guidelines, playing many strategic roles for Multinational Companies’ Branches in Ecuador, South-America (+15 years)

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

T/A Siemens, Kawasaki, GE, Solar Turbines, Startup Manager, Operations, Combine Cycle

Experienced Project Manager/ QC / Controls Manager

Instrument Engineer with 12 years experience

Safety Supervisor , HSE Supervisor for all oil/gas, Pipeline, Offshore Construction, civil Construction

16 years Safety Construction, Developer of Behavior Safety Assurance Formula, Bs Occupational Safety and Health

Sr. EHS Manager Professional, 20+ years

Experienced Latex and PU Plant Manager

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

Certified General Contractor, Concrete finisher, Underground Utillities, Reliable, Creative,dependable

20 years management experience including Construction Management, Project management, estimating and planning

Senior Contract Engineer Trilingual English/French/Spanish Oil and Gas industry, experience in Africa, South America, Europe. Working for a major international engineering company. Mainly contract formulation and admin. but also project and construction management, cost control and planning.

Chemical engineer with 3 years of experience in the fields of R&D, pilot plant, process design, basic & detailed engg., project management & procurement in chemical, bulk drug & pharma industries

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I have done my B.Tech from the Indian Institute of Technology Delhi(IIT DELHI) in May 2007, a prestigious institute of India. Detailed information with regard to my studies, experience etc is enunciated in the annexed Biodata,Currently working as a Planning Engineer in Leighton International Limited

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

Country Manager, Nigeria, The Olive Group. Formerly Chief of Security, River Ranch diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

A professional team member, excellent skills, hoping to bridge Canadian / UAE markets in Oil and Gas - training and development

Management/Business Development of Engineering/Consulting Services

I have 30 safe Years as a Manager, Engineer type,Supervision, Safety, and a Heavy Crane Operator that excels working on Lift Studies, Safety, Meetings, Man Power, Crane Assembly/Dissemble/Boom Changes, and written Lift Procedures.

Graduated Mechanical Enginner with Extensive Experience in Europe, Australia and Africa in Power generation, Oil Exploration, Mining Industry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out