Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #37084 next resume »»
CONTACT INFORMATION:
View contact information...

I have more than 12 Years of in depth Experience in the field of Quality Control and Assurance, Supervision, Inspection and Pre-Commissioning of Electrical, Instrumentation and Cathodic Protection Systems for Oil and Gas Plants, Remote and Relief Manifolds, Gas Gathering Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, Main Line isolation Valve stations, Pump house, Intermediate scraper traps, In-let area, Electrical Sub-Stations and Overhead Power Transmission lines, in accordance with International Technical norms (NEC, NFPA, NESC) Saudi Armco and SCECO Engineering Standards.
* Installation of Power Transformers, Switchgears, Motor Control Centers, Switch racks, Disconnect switches, Circuit breakers, Emergency Diesel Generators, Direct Current system, Relay panels, Marshaling Racks, Remote terminal units, Well Shutdown Hydraulic panels, Instrument junction boxes, Battery chargers, Cathodic Protection Rectifiers, Photo vatic systems, Instruments.
* Installation of under ground and above ground Conduits, Cable trays, Duct banks, Power, Control and Instrument cables.
* Erection assembling and Pre commissioning of 69kv and 13.8kv Overhead Power Transmission lines.
* Construction of Electrical Substation Building, Central Control room, Marshalling rack room, Battery room, and Operation Support Building.
* Calibration of Instruments such as Pressure transmitters, Flow transmitters, Level transmitters, Temperature transmitters, Pressure switches, Temperature switches, Pressure indicators, Temperature indicators, Pressure relief valves and Temperature recorders.
* Installation and Testing of Ground Grids for Sub-stations, Well head facilities and Manifolds.
* Pre-commissioning and Testing of Switch rack Breakers, Transformers and Motor control centers and Hi-Pot Testing of power cables.
* Installation of Cathodic Protection system for Well heads, Transmission pipelines, Flow lines and Trunk lines, such as Deep anode bed, Distribution anode bed, Horizontal anode bed, & Temporary C P systems.
* Material Inspection and identification as per Project specification.
* Implementing Quality Control requirements on construction sites mainly in the installation of Electrical, Instrumentation and Cathodic Protection systems, Preparation of Quality Control Procedures and Inspection Test Plan in accordance with Saudi Aramco and applicable International standards.
* Prepare and Submit Electrical Test packages and Instruments Loop packages for clients approval and records, Maintain documents in respect of Quality requirement and Quality control check list, inspection test plans and Reports incorporate latest applicable industrial codes and Saudi Aramco engineering standards,
Experience: February 2003 to date. SUEDROHRBAU Saudi Arabia Limited
(a member of KOOP group Netherlands)
Kingdom of Saudi Arabia.
Certified Electrical & Instrumentation QA/QC Supervisor.

Here I worked More than 4 Years as a Certified Electrical & Instrumentation QA/QC Supervisor at Following Saudi Aramco Projects.

* Aramco Contract # 16122: Khurais Seawater Injection and Distribution Headers, Khurais.

* JCP Contract # 0074: Jubail Chevron Phillips (JCP) and Juaymah Gas Plant, Sales Gas, Propane, Supply from Juaymah Gas plant to Jubail Chevron Philips Plant, Jubail.

* Aramco Contract # 14789: HNRP NGL Plant, Hawiyah NGL Recovery Plant Upstream & Downstream Gas Pipelines, Project, (Hawiyah NGL to Hawiyah Gas Plant) Hawiyah.

* Aramco Contract # 14521: Shedgum Gas Plant, SHY-1 Expansion Phase 1 Pipeline Capacity Increase, Shedgum to Yanbu. (2 Grade Gasoline and Additional Capacity Projects) Shedgum.

* Aramco Contract # 14408: Onshore Maintain Potential Construction, Shedgum. (Trunk lines and Oil Well's)

* Aramco Contract # 13508: North T/L # 1, 2&3 and Associated wells to Haradh Increment III, Haradh.( T/L, F/L and Oil well's)

* Aramco Contract # 12727: Haradh Khuff Gas Project, Haradh.( Khuff & Jauff Gas Wells)

* Aramco Contract # 10935: Haradh Gosp-3, Haradh Al Crude Increment Phase III Pipeline Project, Haradh.

Duties & Responsibilities:

* Co-ordinate function with client Inspection Department, site Engineer, Sub-Contractors and Project Management, preparing Inspection two weeks look ahead schedule. Checking of site and measurement of completed work. Attending the meeting with client Engineers, unit head and superintendent.
* Responsible for clearing the Technical Query's with consulting service department (CSD), client engineers and design department.
* Responsible for the Supervision, Inspection, Monitoring, Preparation and Implementation of Quality plan in Electrical, Instrumentation, Communication and Cathodic protection activities.
* Coordinate Quality procedures to construction department, Project management and client Inspectors, Coordinate the E-log book Answers and Corrective actions for client inspection comments, attending the weekly QA/QC meeting.
* Drawings review and check field installation in conformance with Saudi Aramco Standards, and International standards.
* Material receiving Inspections for identification and damages, Preparations of non-conformity reports in all deviations and violations of approved standards met during Inspections.
* Prepare request for inspection to client for inspections and acceptance of installations and Testing.
* Supervision of clearance of exception items lists, Prepare documentation & filing system of all Quality plan to delivery to client.
* Ensure all works done as per client drawing & other applicable industrial standards.

December 1997 to February 2003.
SUEDROHRBAU Saudi Arabia Limited.
(a member of KOOP group Holland)
Kingdom of Saudi Arabia.
Certified Electrical & Instrumentation QA/QC Inspector.

5 Years I worked as a Certified Electrical & Instrumentation QA/QC, Inspector, at Following Saudi Aramco Projects.

* Aramco Contract # 44658: Qatif Down Stream Pipeline Project, Qatif. ( Interconnect the pipeline between Qatif Gosp-1 to Berri Gas Plant, Juaymah Tank forms, Rastanura Refinery, Rastanura South Terminal and Qatif Gosp-2)

* Aramco Contract # 44496/01: Haradh Gas Plant Project, Haradh Gas Gathering Manifolds &Transmission Pipelines, Haradh. (Haradh, Waqar and Tinat Gas Gathering Manifolds, 69 kV / 13.8 kV Substation and Power Transmission Lines)

* Aramco Contract # 47206/02: South Haradh Khuff Gas Project, Haradh. (Khuff Gas Wells, Remote Header and Flow lines)

* Aramco Contract # 47206: Khuff Gas Projects, Hawiyah.( Khuff Gas Wells and Flow lines)

* Aramco Contract # 45845: Flow Line Central Arabia, Nuayyim.

* Aramco Contract # 45633: Shaybah Oil Field Development Project, Shaybah

* Aramco Contract # 45052: Flow Line Central Arabia, Hawtah.

* Aramco Contract # 45000: Electrical & Instrumentation, Hawtah.

Duties & Responsibilities:

* Responsible for Inspection and Monitoring of Electrical, Instrumentation, Communication and Cathodic protection activities.
* Inspection of Installation, Termination & Testing of electrical equipments, U/G and A/G conduits, cable trays and tubing for instruments, Photo vatic system for Cathodic protection, Instruments lab calibrations.
* Installation of Cathodic protection systems such as Deep anode bed, Distributed anode bed, Horizontal anode bed, & Temporary C P systems.
* Preparing Electrical & Instrument test packages.
* Installation Inspection of Over head power transmission lines such as pole framing, pole erection, hardware installation, conductor sagging, string, clipping & testing.
* Inspection of all Electrical, Instrumentation and Cathodic protection activities, Ensure all works done as per client drawing & other applicable industrial standards.
* Inspection for testing of Circuit breakers and Transformers.

June 1997 to December 1997.
SUEDROHRBAU Saudi Arabia Limited.
(a member of Suedrohrbau International German)
Kingdom of Saudi Arabia.
Electrical & Instrumentation Foremen.

6 Month I worked as a Electrical & Instrumentation Foremen.

* Aramco Contract # 45000: Electrical & Instrumentation, Hawtah.

Duties & Responsibilities:
Supervision of all Electrical and Instrumentation Works, Installation, Termination & Testing of Electrical equipments, conduits works, tubing, cable trays, Power, Control cables, Perform calibration of instruments, Installation of Photo-vatic systems for Cathodic protection, Assist Client during commissioning

August 1995 to June 1997.
Lewis Electrical and Re-winders, Karnataka, India.
Site Supervisor.

2 Years I worked with Lewis Electrical and Re-winders, Karnataka India, as a site Supervisor for their Sites and shop floor.

Duties & Responsibilities:

Management and supervision of construction and maintenance of Electrical works, such as installation of power panel, installation of lightings, power outlets, installation of the laundry equipment, cable pulling and termination to their respective equipment/devises, installation of motors and wiring systems for Ice plant, Milk Factory and sugar mills, electrical and plumbing installations of Public Housing, High standard Villa, Installation of submersible pumps for watering systems, Maintenance of power generator, water pumps, panel boards, rewinding of motors.

Summary:
I worked on different Gas & Oil field projects with Saudi Aramco as an Electrical and Instrumentation QA/QC Supervisor / Inspector. I worked on different major projects in different plants all over the Saudi Arabia like Berri Gas plant Jubail, Juaymah Gas plant Juaymah, Rastanura refinery Rastanura, Juaymah tank forms Juaymah, Rastanura south terminal Rastanura, Shedgum NGL plant Shedgum, Haradh Gas plant Haradh, Jubail Chevron Philips plant Jubail, Hawiyah NGL Recovery plant (HNRP) Hawiyah, Qatif Gosp-1 and Gosp-2 (Gas and Oil separation plant) Qatif, Haradh Gosp-3 and Gosp-2 Haradh, Hawiyah Water Injection plant (WIP) Hawiyah, and different Gas gathering manifolds and Oil and Gas well sites. And comprehensively familiar with the all the concerning standards, procedures and all safety pre-cautions for a safe construction and testing commissioning work.

Desired Position/ Motto of life:
Any appropriate position according to the above mentioned experience and hidden hardworking which can ends in the thriving achievement of the given goals and challenging targets. And I believe on taking the full responsibility and fulfilling it at my level best.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1651 to 1700 of 2260)Go to Search Parameters...
Brief Description
Service Support/ Product Support Heavy Equipment Maintenance Manager
Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR
12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc
QA Manager,Quality Engineer, QA/QC Supervisor, Auditor, Instructor,Multi-Discipline Field Inspector
Key skill: Design and Implementation of quality management system Education: Degree in Mechanical Engineering (A.M.I.E) from “The Institution of Engineers”-India Certifications: ISO 9000:2000 Series QMS Lead Auditor - course conducted by B.V.Q.I.
QHSE Assistant with 4 years experience, 8 years in the Oil & Gas Sector, advanced PC Skills and Statistical Techniques.
EXPERIENCED PRODUCTION PLANNER
Talented HR professional with a generalist background. Experienced working in a professional services environment with complex hierarchies and matrix management. Ability to operate at both a strategic and operational level, within a geographically diverse team and in an international role.
Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation
Wealth of experience gained within an International Company in all aspects of Wireline, LWD, well placement and ‘geosteering’ in both onshore and offshore projects. To secure employment within a challenging exploration or developmental role to fully utilise six years of field experience.
HSE advisor to the upstream oil & gas industry with 13 years experience in Australia, Russia, Nigeria and the Middle East.
Chemical Engineer with Environmental Engineering experience
Well experienced as an Electrical Field Maintenance and Construction QA/QC & Foreman in Oil and Gas Facilities, Refineries, Airport and Mining Industries with a demonstrated ability to lead Maintenance and Construction Projects.
Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased
Senior Mechanical Engineer, Bachelor Of Engineering
Cwi/QA/QC Manager
Ermapper, Erdas Imagine, ESRI (ArcGIS 9.x, 8.x, Arcview 2.x, 3.x), Seagate Crystal Report, Spatial Analyst 3D Analyst, AutoCAD, Microstation 95, MSwords, MSExcel, Windows (2000, NT, XP) B.Sc Computer Science
Bachelor of Mechanical Engineer, TWI Certified CSWIP 3.2, AWS certified CWI, Level II in MT, PT, RT, UT and ISO 9000-2000 Certified Lead Auditor.
Operations Manager or Shift Supervisor in a Power Plant
Experienced Laboratory Manager. 17 years petroleum lab experience. 12 years management experience. Extensive knowledge of ASTM IP, UOP, ISO test methods, ISO 9000, purchasing, budgeting, equipment maintenance, staff management, environmental and safety requirements in petroleum testing laboratory.
I have a Bachelor of Engineering Degree with Post Graduate Diploma in Construction Management, and with my wide ranging experience in the field of Engineering and Construction for a period of over 13 years,I am looking for a opportunity to excel myself in Planning and project Controls.
Proposals & Contracts, Commercials, Process & Technologies, Project Management
Project Management / Engineering Coordination / Process Engineering / Business Development
EE + Internatianal contracts egotiatins from proposal to contract concluding.
Over Four years of work experience as a Planning Engineer and one year as Maintenance Engineer. Superior Knowledge of Primavera 3.1, MS Project 2003/ 2007 and MS Office (particularly MS Excel) through proven experience in Project planning and intensive usage.
I am Commerce Graduate, Fellow member of ICSI (FCS) and Microsoft Certified Professional (MCP) with 13 years of work experience in Finance, Accounts, Company Affairs and Statutory Compliances.
Senior Instrumentation & Control and Telecom-SCADA Engineer
Engineering Service Manager
Instrumentation & Commissioning Analyzer Engineer
Innovative thinker with broad-based expertise in human resources, and business development.
Graduate Engineer / Junior Engineer
Electronics and Telecommunication professional with exactly 12 years of rich experience in the domain of Technical Support, Operations and Maintenance, Training and Development, Relationship Management with reputed organizations.
To secure a position in Environmental Health and Safety (EHS) Compliance with an established organization utilizing my 20 years of EHS skills, knowledge and experience.
Financial Manager (expat)
20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.
I have a master degree in Chemistry and post graduates in International Law and Ecology. I have worked as an HSE specialist for more then 13 years.
To obtain a position as a Technical Recruitment Professional within a fast- paced corporate environment in Oil & Gas industry. Also, to continuously expand my technical knowledge and apply that knowledge in a rewarding and challenging role to infuse my peak performance.
SKILLS SUMMARY Manager, with strong electrical and mechanical background, 15 yrs construction and maintenance electrical experience, 9 years mechanical experience, performed purchasing and business development skills,. Proficient in Microsoft Word, Excel,
I have over 27 years in mechanical repairs
I am diplomaed Engineer - geologist/hydrogeologist, having some experience in micropalentology.
I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS
I have acquired strong financial analytical skills including discounted cash flow modeling
Operations, coordinations, MIS, Advanced Excel, Customer service
BSc in Economics(First Class), ACICMN, AICEN
Geoscientist. I am a highly qualified, versatile geoscientist with 7 years of Petroleum industry experience, 2+ years in Processing Geophysics with a major global energy company.
I am a site acquisition specialist with a 3+ years of experience, i have skills in g.i.s. and the use of various softwares in g.i.s. as well as windows packages
Lean Master and Master Black belt instructor, facilitator and coach currently with BMG (Breakthrough Managemnt Group). Main function currently as Six Sigma and lean account executive responsable for the deploymemnt of Lean and Six Sigma initatives with various local and international orgenisations.
1. Implementation of Quality Management Systems (New and Old versions)
Safety, Hazardous Materials, Gas Turbine Engine Experience, Pruhdoe Bay Oil Field Experience
Dirt Superintendent / Foreman/ Heavy Equipment Operator with 25 years experience.
1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   [ 34 ]   35   36   37   38   39   40   41   42   43   44   45   46  
Seach Parameters

Change search parameters...
CATEGORIES: Management;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com