CONTACT INFORMATION:
View contact information...
M.Sc. P.Eng.
A professional (M.Sc.Degree) well qualified Instrumentation / Process Control Engineer, with 24 years in-depth design, management, consulting, maintenance, and teaching experience.
Membership: Professional Engineers Ontario – License No: 90549635
APEGGA (Alberta Province) - License No: 58716
EDUCATION:
M.Sc. Precise Mechanics Engineering, 1979 University of Warsaw,
Industrial Automation & Metrology
TRAINING:
DeltaV DCS application, 2003, Spartan Control (Emerson licensed), Edmonton, Canada.
PlantScape DCS ctrl design and configuration, 2003, Honeywell Canada, Calgary
Modicon Quantum PLC config. & programming, 2001, Schneider Automation, Calgary
Petroleum Technology, 1997, Canadian Petroleum Institute, Calgary
Bailey Infi 90 DCS, 1997, Southern Alberta Institute of Technology, Calgary
Allen - Bradley PLC Programming Applications, 1996, SAIT, Calgary
Siemens PLC (Simatic S5 family), 1994, Siemens, Co., Poland
Design, Service, and Operation of Solenoid Valves, 1990 ACSO Co., Netherlands
PRESENT POSITION
Senior Instrumentation / Control Systems Engineer Opti Canada/Nexen - Long Lake Bitumen (Oil sands) extraction and upgrading project. Asphaltenes gasification process – detailed engineering design of
Safeguarding Systems (SIS), Safety Instrumented Function performance determination (SIL selection process)
- SILect - Exida's SIL selection tool. Layer of Protection Analysis, Required Risk reduction Target SIL calculation.
Creation of the Safety Requirements Specification (SRS tool). SIL Verification by using SILver™ 2.0 web-based software,
ISA 84.01, and the new IEC61511 functional safety standards. Vendor bids evaluation control system architecture design.
PREVIOUS POSITION:
Upgrader Expansion Project (UE-1) for Syncrude Ltd. Bitumen (Oil sands) extraction and upgrading project
(CDN $4.5bln); utilities and offsites at Fort McMurray (Alberta Province)– project budget and schedule management; detailed engineering design review, correction and modifications – instruments sizing, selection and specification (InTools), control narratives, logic diagrams, SAMA diagrams, C&E tables, control system architecture modification (PlantScape, Modicon PLC, Triconex SIS – Modbus TCP/IP). FAT,
SAT and integration tests participation, commissioning and start-ups:
CO Boilers (BMS), soot blowers, precipitators, utility boilers, boiler feed water pumps, steam turbines, power generators, water demin. system, precoat filters, water-cooling tower, air compressors, storage tanks.
EMPLOYMENT HISTORY
1) SNC LAVALIN INC. – Calgary, Canada August 2001 – March 2002
Rabigh Refinery (ARAMCO – Saudi Arabia) ESD System Replacement Project
Instrumentation Lead Engineer; Project scheduling and budget control; (PM+), SIL analysis,
Logic Diagrams, Cause & Effect Matrix, and Logic Narratives creation, P&ID dwgs modifications,
Project Database design -(InTools); Triconex PLC, Bently Nevada 3500 system - hardware specifications and bids evaluation. TMR ESD system integration with Foxboro I/A DCS system.
2) KUWAIT OIL COMPANY (KOC), Kuwait March 2001 – August 2001
Oil Gathering Centres revamp and modernization projects, heavy crude 36" pipeline with booster station construction project.
Senior Instrument./Control Systems Consultant; Scope of Work creation; project schedule and budget estimate;
KOC Corporate standards creation for instruments selection, sizing; installations and lay-outs;
Control philosophy, control system (Fisher Delta V DCS) architecture and database design.
3) COLT ENGINEERING CORP. – Calgary, Canada October 2000 – March 2001
Steam Assisted Gravity Drain (SAGD) MacKay River crude extraction from oil sands project.
Instrument./ Control Systems Lead Engineer; Instrument specifications development; Technical guidelines creation for instrument selection, specification, and sizing; EDBM, Control Philosophy and Control Diagrams generation. Control System architecture design (Honeywell – PlantScape; AB PLC-5), A-B PLC application development for multi-port switching valves control.
4) BANTREL INC. (Bechtel) – Calgary, Canada, January 1999 – October 2000
- Shell Oil - Canada. June2000 – October 2000, Athabasca Oil Sands Downstream Project
Senior Instrument./ Control Systems Engineer; Instrument Specifications Development; Control Philosophy and Logic Narratives generation. Foxboro I/A DCS system architecture design.
- Union Carbide Inc. Jan2000 – May2000, Petrochemical Plant Expansion Project (LP7) Red Deer, Canada
Senior Control Systems Engineer; Modicon Quantum PLC programs troubleshooting, Moore Quadlog SIS testing and simulation. Integrating PLC applications with Honeywell TDC 3000 DCS system.
- Suncor Energy Inc. August 1999 – Jan2000 Fort Mc Murray - Millennium Project. Crude oil production facility and bitumen upgrade project.
Senior Instrument./ Control Systems Engineer; QA/QC - Quality Check/Assurance providing for instrumentation design;
control philosophy determination, instrument sizing, specification, instrument installation details drawings,
P&ID and loop drawings creation and modification.
- Suncor Energy Inc. Jan 1999 – Aug 1999 Fort Mc Murray PEP (Synthetic Crude Oil Production Enhancement Phase Project)
Senior Instrument./ Control Systems Engineer; QA/QC - Quality Check/Assurance providing for instrumentation design and specification, instrument installation details drawings, P&ID and loop drawings creation and modification.
Instruments selection and sizing.
5) Kenonic Controls (Emerson) – Calgary, Canada, January 1996 – January 1999
- Wascana Energy Inc. 1996 - 1997, Plover Lake, Court, and Senlac oilfield batteries and satellites SCADA project.
Instrumentation Lead Engineer, instrumentation corporate standards development, instrumentation design and specification, instruments installation details drawings generation, SCADA systems design, (Fisher ROC RTUs),
P&ID modification, Allen Bradley PLC 5 program development and commission. for oil batteries, satellites and well-sites, Wonderware HMI graphics creation, project database development.
-TransCanada Pipeline 1997 – 1999, I&C design for gas compression station
Instrumentation Lead Engineer. Instrumentation design and specification, project database design (MS Access),
Control philosophy creation, Modicon and GE Fanuc PLC programming, FAT, SAT and commissioning, Sterling valves sizing and specification, project budget and tiem schedule control. Supervision of 7 intermediate engineers.
6) Arabian Gulf Oil Company – Sarir Oil Field, Libya, January 1991 – December 1995
I&C Maintenance Team Supervisor. Maintenance of oil/gas/water production facility, water/gas/oil separation, wash-water injection, crude desalination, LPG gas compression plant, oil refinery, and power generation plant.
Participation in new projects commissioning and start-ups. Instruments installation inspection. On - Job training provided for local staff.
7) Garyounis University - Benghazi, Libya, January 1987 – September 1990
University Lecturer, Lab Instrument Engineer - Lecturing of Mechanics of Machines, Fluid Mechanics, and Physics labs. Installation, starting-up scientific equipment and testing machines, participation inscientific research
8) Medical Equipment Factory – Poland June 1979 – December 1986
Head of Production Department, Production department management, quality products and production time schedule execution, technological progress programs implementation and monitoring
Design Engineer, Control systems and instrumentation design for medical equipment manufacturing machines and assembly lines.
EXPERTISE
- Industries:
Conventional oil and gas production; Crude oil/gas/water separation, pumping and storage; Transmission pipelines;
Natural gas compression; Condensate and LNG processing, LNG transmission pipelines; Gas distribution utilities;
Oil refining; Refined product transportation; Gasoline/Diesel/Jet fuel blending; Electrical power generation, transmission and distribution; Petrochemical Plant – polyethylene production; Water purification, Plant utilities;
ESD, Fire & Gas detection systems.
- Studies:
Preliminary engineering, Conceptual Design; Cost Benefit Analysis; Strategy Planning Studies; Facilities Control
Philosophy Development & DBM creation; Front End Engineering, Year 2000 Business Risk Assessment.
- PLC and Human Machine Interface HMI
Allan Bradley PLC-2 & 3 & 5, A-B Control View,Siemens - Simatic S5, S7; Modicon – Concept; Moore Quadlog, Triconex SIS
- DCS:
Bailey Infi 90 & NET 90, Honeywell TDC 3000, TPS, PlantScape - Honeywell, A/I Foxboro
- Engineering/Maintenance Applications
InTools, Instrument Information System (IIS), Material Management (MatMan), FormTool, CAIES (Bechtel).
- Sizing Software:
Fisher-FirstVue, Masoneilan-Dresser control valves Sizing, Crosby/Anderson-Greenwood Consolidated PSV Sizing,
FloWell - orifice plates sizing.
- Instrumentation – Hardware:
Liquid and gas flow, pressure, level and temperature sensors and transmitters - pneumatic and electronic loop powered analogue, digital with software based communication, fieldbus compatible. (Rosemount, Honeywell,
Foxboro, Yokogawa, Endress+Hauser, Johnson and Siemens etc). Gas and liquid meters - Oil Gear, orifice, positive displacement, mass flow, turbine type, ultrasonic, magnetic, vortex shedding, annubar, thermal;
rotating equipment temperature and vibration monitoring - (IRD, Shenk, Vibrocontrol 2000, Bently Nevada 3500)
Computerised oil flow metering (proving) - Waugh 1120.
LANGUAGES
Fluent in English, good in Russian, limited in Arabic and Spanish.
Additional Information:
Married no dependents
All diplomas, certificates, and references available upon request.
View contact information... |