Resume - Degree in Mechanical Engineering, Lead Mechanical Engineer in Oil & Gas Industri...

Misco Jobs

Resume #41800

CONTACT INFORMATION:
View contact information...

EDUCATION QUALIFICATION
Bachelor's Degree in Mechanical Engineering (April 1995) from Regional Engineering College (Now known as National Institute of Technology, An autonomous college of SAMBALPUR UNIVERSITY)- Rourkela (Orissa), India

SUMMARY OF EXPERIENCE
11 years of post-qualification experience in Conceptual Studies, Basic Engineering / Front End Engineering Design, Detailed Engineering, Procurement Engineering, Project Engineering and Engineering Management for projects in Oil & Gas (onshore & offshore, upstream & downstream), Petrochemicals and Chemicals / Fertilizers industries in the organisations of repute like Technip Middle East, Doha, Qatar as Lead Mechanical Engineer and A/Project Engineer (Permanent Staff position), CTCI Corporation, Taipei, Taiwan, ROC as Senior Mechanical Engineer (Static Equipment), Snamprogetti Ltd, Basingstoke (near LONDON), U.K. as Senior Fabricated Equipment Engineer, Technip - Abu Dhabi as Static Equipment Engineer, Bechtel Corporation, Houston, Texas, USA &
Bechtel India Pvt. Limited, Gurgaon (near NEW DELHI), India as Mechanical Engineer (Pressure Vessel Specialist), Larsen & Toubro Limited, Hazira Works, Surat, Gujarat, India as Sr. Engineer- Product Design & Engineering (Pressure Vessels) and Bharat Heavy Plate & Vessels (BHPV) Limited, Visakhapatnam, Andhra Pradesh, India as Engineer – Process Plants Engineering (Vessels)

COMPETENCIES:
- Leading / coordinating multi-discipline engineering team in meeting the project objectives with broad knowledge of inter-dependency of disciplines / functions.
- Management of engineering interface between various parties involved, Management of subcontractors / vendors, Knowledge of contractual matters and Project Control (Planning / scheduling and cost control) as necessary for Project Management.
- Preparation of Mechanical Datasheet, Specification / Selection, Technical Bid Evaluation & Vendor Document Review for Static Equipment (Pressure Vessels, Columns, Reactors, Shell & Tube Heat Exchangers, Air Cooled Exchangers, Storage Tanks, Filters, Trays / Packing etc.) and Packaged Equipment with overall knowledge of rotating equipment, material handling, HVAC equipment / packages and Piping as required for leading mechanical engineering team.
- Knowledge of International codes & standards like ASME (SEC. VIII-Div-1 & Div-2, SEC. II, SEC.IX, B31.3, B31.4, B31.8, etc.), PD 5500, AD Merkblatter, TEMA, API-660, API-661, API-662, API-620, API-650, AISC, ASCE, IBC, UBC, IS etc. as applied to Static Equipment in Oil & Gas Industry.
- Knowledge of Microsoft Office Applications (MS Word, Excel, PowerPoint etc.) and mechanical equipment design packages like Compress (CODEWARE), PV Elite & CODECALC (COADE), MICROPROTOL, FINGLOW and various in-house developed software programs as gained through hands on experience. Also, familiar with drafting packages like AutoCAD, InfoWorks (i.e. Bechtel's Document Management Package), BPS (Bechtel's Procurement System), Technip's Electronic Data Management System (EDMS), REQUI (Technip's Material Requisitioning Package), DOCMAN (Snamprogetti's Document Management System), Baan IV ERP Package etc.
- Awareness / Application of Quality Management and Health, Safety & Environment principles. Well Conversant with operating procedures to suit ISO-9001, ISO-14000, OHSAS 18000 and ASME code stamping (U, U2 & S stamp jobs) requirements. Exposed to latest Total Quality Management tools (like Six Sigma, Juran's Quality Improvement Technique, TQM, COPQ, Kaizen concept etc.) through various training program and direct participation.

EMPLOYMENT HISTORY, PROJECTS HANDLED AND ROLE PLAYED:

TECHNIP MIDDLE EAST, Doha, Qatar (March 2005 - present)
Company Website: www.technip.com
Technip office in Doha, known as TECHNIP MIDDLE EAST (TPME) mainly involves in brown field / medium sized projects and provides engineering services to local Qatari client for expansion / modification of their facilities.
Working as a lead mechanical engineer, responsible for management of all mechanical engineering activities in Doha office. I have also taken additional responsibility as Project Engineer / Manager for Coordinating & Leading Multi-discipline engineering team efforts for the small sized projects / proposals assigned. Act as FOCAL POINT for client / other parties involved in the project / proposals.
The assignment includes the following (client wise):
- Total Elf – Qatar (TEPQ)
- Qatar Vinyl Company Ltd. (QVC)
- Qatar Petrochemicals Company Ltd. (QAPCO)
- Occidental Petroleum of Qatar Limited (OPQL)
- Qatar Chemical Company Ltd. (Q-Chem)
- Qatar Fuel Additives Company Ltd. (QAFAC)
- Qatar Petroleum Ltd. (QP)
- Qatar Liquefied Gas Company Limited-II

CTCI CORPORATION, Taipei, Taiwan (December 2004 – March 2005)
Company Website: www.ctci.com.tw
Worked as a Senior Mechanical Engineer (Lead Static Equipment Engineer), part of project task force and reporting to Lead Mechanical Engineer (Rotating, Static & Packaged Equipment). Major contract involvement includes:
- OPC-PTA Project
Client: Oriental Petrochemicals (Sanghai) Corporation (OPC)
Project: Pure Terephthalic Acid (PTA) Plant
Location: Pudong, Sanghai, Peoples' Republic of China
Licensor: DuPont (UK) Limited
FEED contractor: Foster Wheeler
Contract Scope: EPC (Engineering, Procurement & Construction) Services to client
Equipment Handled: Vessels, Tall Towers, Tower Internals, Shell & Tube Heat Exchangers, Plate Heat Exchangers, FRP Tanks, Filters etc.
Role Played: Post-Award Management of Vendors including Vendor Document Review

SNAMPROGETTI LTD., Basingstoke, U.K. (January 2004 – November 2004)
Company Website: www.snamprogetti.eni.it
Working as a Senior Fabricated Equipment Engineer, part of project task force and reporting to Chief / Lead Fabricated Equipment Engineer. Major project involvement includes:
- Saudi Aramco - Yanbu Refinery LSRN Isomerisation & CCR Platformer Projects, Saudi Arabia
It is a existing UOP Fixed bed Platforming unit at Yanbu Refinery to be converted to a Continuous Catalyst Regeneration (CCR) Reformer, capacity to produce 100 RON. A new Light Run Straight Naptha (LSRN) Isomerisation unit to increase the RON by 18 numbers.
Client: Saudi Aramco
Project: LSRN Isomerisation & CCR Platformer projects
Location: Yanbu
Licensor: UOP
FEED Contractor: Foster Wheeler
Contract Scope: EPC (Engineering, Procurement & Construction)
o Prepared Datasheets, Completed Technical Bid Evaluations and Reviewed Vendor Documents for
- Absorber Column, Stabilizer Column & Net gas Scrubber Column and their internals such as Sieve Trays, Distributor trays, Chimney tray, packed beds etc.
- LSRN Isomerisation Reactors
- Twenty five Pressure Vessels of various types (Leg, Lug, Saddle & Skirt Supported, low/moderate temp., hydrogen/caustic service) and their internals such as Demisters, Pipe Distributors, Outlet Basket, Inlet Distributor etc.
- Two API-650 Storage Tanks
- Shell & Tube Heat Exchangers and Air Cooled Exchangers (only part involvement)
- Decided painting, insulation and fireproofing requirements for vessels and heat exchangers based on Saudi Aramco specifications o Responsible for Post Award Management of two Vendors, Belleli Saudi Heavy Industries-KSA and Koch Glitsch-UK
- Coordinated with Piping/Civil/Instrumentation in finalising nozzle locations, details of ladder & platforms, pipe supports, foundation design and instrument nozzle locations o Provided assistance to Project Control / Project Management to maintain the schedule and to control the cost of the equipment o Provided Input to Construction for SUB CONTRACT package.

TECHNIP-ABU DHABI, UAE (August 2003 – December 2003)
Company Website: www.technip.com
Worked as a Static Equipment Engineer and reporting to Head of Static Equipment Group. Major Project involvement includes:
- KNPC Vacuum Re-Run Return Revamp Project-Kuwait o Preparation of Technical Specifications and scope of work for supply of components and site modifications of existing Vacuum Towers & their internals, Heat Exchangers, Air Coolers & Heaters o Preparation of technical bid tabulation for modification of Air Coolers.
- Petro-Iran Development Company's Salaman Sirri Island Compression Facility (Front End Engineering Design)
- Preparation of Specifications for Pig Traps and Pressure Vessels.
- Preparation of design calculations and equipment datasheet for HP & LP Flare K.O. Drum, HP Separator, Condensate Collection Vessel, Compressor Suction & Discharge Scrubber, HP Fuel Gas Scrubber, Closed Drain Drum, Instrument Air Receiver, Plant Air Receiver, Nitrogen Receiver, Potable Water Pressurisation Tank, Diesel Filter Coalescer, Diesel Storage Tank, Fire Water Storage Tank, Pig Launcher and Receiver and Compressor Discharge Air Cooled Exchanger.
- Preparation of Material Requisitions for Pressure Vessels (High wall & low wall thick), Air Cooled Exchangers and Pig Traps.
- Canadian Nexen Petroleum Yemen-Qataban Junction And Heijah Area Hydrocyclone Addition Projects (Feed & Detailed Engineering)
- Preparation of Technical Specifications, Material Requisitions and Equipment Datasheets for Hydrocyclones, Inlet Separator, Produced Water Surge Vessel, Strainers and Tanks.
- SADAF/SABIC-CFC Phase Out Project-Saudi Arabia o Checking out design of existing equipment (Heat Exchangers & Pressure Vessels) for suitability under the new process environment.
- TAKREER's Injection Of Condensate Residue Into HVGO Pump Around Project-Abu Dhabi o Preparation of datasheet, design calculations, Matl. Reqn. And Scope of Supply for Vertical Surge Drum and Filter.
- ADMA-OPCO's Flares Modification Project-Abu Dhabi:
o Technical Bid Evaluation of Flare Knock out Drum and Blow Case Vessels.

BECHTEL CORPORATION, Houston, Texas, USA (September 2002 – June 2003) AND BECHTEL INDIA PVT. LIMITED, Gurgaon, India (July 2003-August 2003)
Company Website: www.bechtel.com
Worked as a responsible mechanical engineer part of Project Task Force reporting to Project Lead Mechanical Engineer for Bechtel's Petroleum & Chemicals Global Business Unit. Major project involvement includes:
- Egyptian LNG Project (A US$900 million project in Idku-Egypt)

Client: Egyptian LNG
Project: LNG (Gas to Liquid)
Location: Idku-Egypt
Licensor: Conoco Philips
Contract Scope: EPC (Engineering, Procurement & Construction)
Major Equipment Handled: Pressure Vessels, Tall Columns, Column Internals, Tanks, Filters, Liquid Nitrogen Package o Carrying out Mechanical Design using 'COMPRESS' and 'DISASU', Preparation of Technical Specifications, Mechanical Equipment Datasheets, Material Requisition for Inquiry & Purchase, Technical Bid Tabulations, Attending bid clarification, pre-award, Kick-Off & post-award meetings with vendors, Carrying out Review of Vendor Prints (Design Calculations, Fabrication Drawings and Other technical documents) for
- CO2 Absorber Column & Stabilizer Column and their internals
- Twenty six Pressure Vessels of various types
- Eight Filters and Coalescers
- Five shop fabricated Storage Tanks
- Liquid Nitrogen Package o Post award management of vendors (Doosan Mecatec-Korea, Daekyung-Korea, CIMTAS-Turkey, PETROJET-Egypt, ACS Industries-USA, Sulzer Chemtech-UK and Chart Industries-USA)
- Co-ordinated with Process/Project System/Piping/Civil/Instrumentation/Electrical in finalising equipment design, nozzle locations, details of ladder & platforms, pipe supports, foundation design and instrument nozzle locations.
- Provided assistance to Project Control/ Project Management to maintain the schedule and to control the cost of the equipment.
- Provided support to Construction and Sub-contracts to finalise the scope of site work.
- Constant Communication with clients to gain their 'buy in'.
- Closing out client comments on design reviews and HAZOP (Hazard & Operability) reviews -- Management of changes in Scope of Work (Change Orders or Variation Orders)
- Supported Lead Engineer in management of engineering coordination activities of Rotating Equipment / Packages.
- Ensuring adherence to Quality Assurance requirements

BECHTEL INDIA PVT. LIMITED, Gurgaon, India (July 2002-August 2002)
Worked as a Mechanical Engineer (Pressure Vessel Specialist) and was reporting to Chief Mechanical Engineer (Head of Mechanical Engineering). Major duties included:
* Preparation of presentation material for training & development of lower experienced Pressure Vessel Engineer.
* Preparation of ''Pressure Vessel Design Manual' containing description of various types of Pressure Vessels, Codes used, fabrication practices and how to design components of Pressure Vessel in accordance with guidelines of ASME codes.

LARSEN & TOUBRO LIMITED, HEAVY ENGINEERING DIVISION, Hazira WOrks, India (September 1998 –July 2002)
Company Website: www.larsenandtoubro.com and www.lnthed.com
Worked as a lead mechanical design engineer, responsible for complete design, detailed engineering and project engineering of Pressure Vessels meeting & exceeding customer satisfactions within available budget & time frame. I was leading an engineering team consisting of Pressure Vessel Design Engineers & Design Assistant and was reporting to Project Manager. Acted as Alternate Project Manager in the absence of Project Manager.
Duties and Responsibilities included preparation of material take off, technical purchase specifications, design using PV Elitedesign calculations, detailed drawings, resolving fabrication problem at shop & sites, liason with other departments, client / sub-vendors, construction sub-contractors and all other project engineering activities from receipt of quotation till the supply of equipment / site erection of the equipment for following client/projects /contractor:
- FCC Unit of IOCL-Barauni, India (Contractor-Samsung Engineering Co., Korea, PMC-Engineers India Ltd., New Delhi)
- Complete FCC Reactor-Regenerator Package i.e. FCC Reactor, Regenerator and other related equipment & refractory lined pipes including Orifice Chambers as per Stone & Webster Process Design (i.e. Carbon Steel pressure boundary plus Vibrocast/Gunned internal Refractory Lining)
- FCC Revamp of IOCL-Gujarat Refinery, India / UOP & Engineers India Limited o FCC VSS Reactor (Low Alloy Steel plus Abrasion Resistant Lining), Orifice Chambers, Riser & Wye Sections, Regenerated Catalyst Stand Pipes and Regenerator air Distributor.
- Low Sulfur Mogas Project of ExxonMobil Refining & Supply Company, Beaumont (Texas), Billings (Montana) & Joliet (Illinois), USA / Kellog Brown & Roots Inc., USA
- Seven Carbon Steel Towers and Three Weld Overlayed Low Alloy Steel Reactors.
- Polyolefins Project of Saudi Polyolefins Company, Al-Jubail, Saudi Arbia / Samsung Engineering Co., Korea & ABB-Houston o Eight Horizontal Refractory Brick lined Catofin Reactors and One 110meter tall Low Temp Product Splitter.
- 2nd DHDS Unit of IOCL-Haldia, India o 2nd DHDS Reactor (1.25Cr.-0.5Mo. + SS-347 Weld overlayed Reactor)
- Polypropylene Project of Tosco Refining Company, USA (Contractor-Kvaerner Process, USA)
- Product Purge Bins, Product Receiver & Vent recovery Surge Tank (with Plasite Lining)
- Gandhar Petrochemicals complex of IPCL-Dahej, India/ Engineers India Limited o Depentaniser (Carbon Steel Tower)
- Projects for Bhaba Atomic Research Centre, Mumbai, India o Pressurisers, Gas Transfer Bottle & Liquid Poison Tank.
Also supported L&T-Chiyoda Joint Venture in developing Datasheets & Specifications for Mechanical Equipment for various Refinery and Petrochemicals Projects within India. At the same time, co-ordinated with L&T-Chiyoda Joint Ventures for getting their assistance on Piping, Instrumentation & Controls and Civil & Structural Disciplines for Detailed Engineering & Procurement activities related to major packaged equipment / Static Equipment.

BHARAT HEAVY PLATE & VESSELS (BHPV) LIMITED, Visakhapatnam, Andhra Pradesh, India (August 1995 – September 1998)
Company Website: www.bhpvl.com
Worked as a pressure vessel design engineer, responsible for complete design and detailed engineering of Pressure Vessels within available time frame. Duties and Responsibilities included preparation of material indent, technical delivery conditions, detailed design calculations, checking of General Arrangement & detailed fabrication drawings, communication with other departments and contractor/client for following project / client /contractor:
- DHDS Unit of Indian Oil Corporation Limited-Haldia, India / Tecnimont o 28 Nos. Pressure Vessels of various types (Horizontal & Vertical, Carbon Steel, Stainless Steel and Carbon Steel +Stainless Steel Cladded)
- Wax Hydrofinishing unit of Indian Oil Corporation Limited - Digboi, Barauni & Haldia, India / Engineers India Limited
- 3 Nos. Wax Hydro-finishing Reactors of different types (2.25Cr.-1Mo.+SS321 Cladded High Pressure Reactor).
- Ethylene Plant of Haldia Petrochemicals Limited, West Bengal, India / Toyo Engineering Corporation
- 20 Horizontal & Vertical and stacked type Pressure Vessels / Storage Vessels & Separators.
- Numaligarh Refinery Limited, Assam, India / Engineers India Limited
- Coke Chambers
- Hot Low Pressure Separator
- Gas Authority of India Limited – Auraiya, Uttar Pradesh, India / Engineers India Limited - Inter Pressure Separator
- Santhal & Balol Project – Oil & Natural Gas Corporation, India / Engineers India Limited
- High Pressure Surge Vessels (Multilayer Vessels).
- Kakinada Urea Expansion project of Nagarjuna Fertlizer Corporation Limited, Andhra Pradesh, India
- Urea Hydrolyzer
- Ammonia Receiver & Recovery Tower o Urea Reactor.(Multi-Layered construction)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 2286)

Go to Search Parameters...

Brief Description

Morethan 11 years experienced HSE Professional. Holder of NEBOSH international General certificate and Diploma in mechanical and Industrial Safety. Worked with Oil and Gas, Civil and marine Projects.

I have 14 years of experience in Human Resources Management, Business Planning, Sales, and Customer Service in leading organizations in Egypt and abroad.

A chemical engineer with 30+ years successful track record in oil & gas, EPC and chemical industries in India and abroad seeking contract jobs or assignments

Strong background including contracts administration, project management, staff training and development, contract negotiation, subcontractor management, safety, quality assurance, report preparation, and client relations.

Strong background in many areas including contracts administration, project management, staff training and development, contract negotiation, subcontractor management, meetings coordination, quality assurance, report preparation, and client relations.

Operations Manager, Strategic Planning, R&D, Business Development, Budgeting, Forecasting, Lean Manufacturing Leader

AUTOMOBILE SALES MANAGER; FORMER U.S. ARMY STAFF SERGEANT, PETROLEUM SUPPLY SPECIALIST WITH LOGISTICAL BACKGROUND

Oil and gas exploration and construction consultant with twenty years worldwide experience seeks project, contract, or position

A qualified Mechanical Engineer with 10 years of diversified experience in Pipeline and Plant Installation and commissioning as well as Polymer production and Structural Repair of components.

GeoEnvironmental Scientist with considerble experience in the environmental and petro-chemical industries

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Where my experience, Education,training and good work habits will be an asset to your company.

Hydrocarbon accountant with years of experience in the oil and gas sector. Highly knowlegeable and is conversant with SAP, JDE and GSAP process.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

IT Project /Transition/Deployment/Service Delivery Manager

AS A CERTIFIED IRCA ISO 9001 LEAD AUDITOR I AM WORKING AS QUALITY MANAGEMENT REPRESENTATIVE AND ALSO I AM QUALITY CONTROL ENGINEER INCHARGE OF MORE THAN 12 INSECTORS AND ENGINEERS WORKING IN CALIBRATION AND INSPECTION. FURTHERMORE, I WORKED IN THE APIQ1 REGISTRATION AND OTHER API SPECS AS API6D

BE Chemical + MTech + 4 Yrs Exp.

Chartered Accountant with three years experience in Oil and Gas Industry

Interface and Collaborate with Project Manager, Lead Engineers on development, planning and implementation Of Safety Guidelines and Procedure Manuals for New Hires

Post graduate Engineer with experience in marketing, engineering, insurance survey.

Having some experiences to work in a team which done by foreigner partners that means joint cooperation with universities abroad. Pointed as team leader and should responsible my work to chief party.

I am an Oil & Gas Facilities Project Engineer (B.Sc. in Mechanical Engineering, 1980) My duties are to develop, supervise, and execute design, procurement and construction of engineered hydrocarbon projects.

Engineer with land and offshore oil and gas experience. Diverse knowledge of safety, drilling rigs, drilling equipment, casing, down hole expertise, completion, workovers, coil tubing, production, operations and cost control.

Cost Controller with strong accounting background. Over 2 years experience as cost controller and 14 years as accountant with multinational companies. Technical skills include preparation of project cost control plans, budgets and forecasts, cost tracking, cost and revenue analysis etc.

Experienced Safety & Security management professional with 21 years of experience and benefitted from ISO, NEBOSH and military background. Management experience with large workforce.

Mariner (Oil) with over 10 years of high quality shipping experience, now available and armed with Australian MBA, Six Sigma Green Belt, ISO 9001 Lead Auditor Certification, plus all other valid STCW'95; courses.

Key skills: Sales Admin & Support, Procurement, Supply chain & Computers

An MBA with over 7 years of extensive Project Management experience in Oil & Gas industry. Skills include managing interfaces across all stakeholders, risk management, contract strategy & contracting, engineering, construction, heavy lift operations and rotary equipment. UK Work Permit Holder.

Installation, Operation and Maintenance Engineer (Mechanical)

12 + Years HSE experience, 27 + years overall experience on International Oil & Gas projects, dedicated professional with a hands on approach to maintaining the highest possible levels of safety. Effective organizational and good training skills; Experienced in onshore & offshore Middle East; Asia

Environmental Management & Permitting/Mining - Oil & Gas - Power - Infrastructure - Construction/Domestic (USA) & International

EDUCATION: 1998-2003 University of lagos, BSc chemical Engineering Second class Division, 1991-1997 Nigerian Navy secondary school, Senoir secondary school leaving certificate. Skills: Dynamic result oriented individual with great interpersonal and communication skills.

EOM Steam Turbine Testing Supervisor, Worldwide Co. Service Rep, Schedule, Plan, Assign Personel, Execute, Document, Vibration/Temperature Analysis- Install, Commission, Overhaul- Generator, Switchgear, Pump, Gear, Compressor, Expansion Turbine, Electronics, Telemetry, Condenser, Boiler, Superheater

Senior Telecoms Technician, radio, satellite, rigger, cisco, networking, cabling, management, hf, vhf, uhf, microwave, tracking, it skills, wireless

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

Environmental, permitting, regulatory compliance work. Mining, power plants, and transmission permitting work. Academic background in range science and ecology. Reclamation experience. Operations, corporate, and international experience.

46 years international experience in EPC project management in oil, gas, power, petrochemical plants, refinery, iron and steel plants, mining, mineral processing plant and infrastructure design and construction. Activities include FEED to project delivery for greenfield and brownfield projects.

Ten years working experience in the oil and gas industry, dispensing the role of QA / QC Inspector for Piping, Pipelines, Pressure Vessels, Steel Structures and Welding from fabrication and installation to pre-commissioning of oil production facilities, oil refineries, natural gas plants etc.

Degree in Mechanical Engineering, Lead Mechanical Engineer in Oil & Gas Industries handling Pressure Vessels, Heat Exchangers, Tanks, Packaged Equipment and Project Engineering. Extensive experience in use of PV Elite, Compress & FINGLOW, Worked in various phase of Engineering like FEED & EPC

M Tech with 10 years exp in Instrumentation& Control field of Fertilisers, Utilities and Power

21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india.

Young MBA & CPA with Big 4 audit experience & multinational internship exposure, a multidisciplinary background & diverse profile, and a great fluency in English, Chinese and Malay.

I recently completed the degree of MA in Management from Webster University London, been engaged in jobs, where I had opportunity to interact with people from diverse groups. Passionate to develop my career in business management.

B.eng. + MBA with 2.5 years exp. in construct. + 4 in mgt and finan. consult with inter. firms in Europe and Canada. French, English, funct. Spanish. Look. for internat. and challeng. position (off / onshore)in project or contract mgt or in a corporate position. Open to other interesting positions.

Planner / Scheduler: 2 Years Experience, Site Engineering: 1 Year Experience Developing Schedules, Resource Allocations, Planning Spreadsheets, Deployment Schedules, Charts, Progress Reports. Review of Contractor’s Programmes, Specifications, Contracts. Tracking Correspondences, Archives

project management.contract management,business management.

By profession I am Mechanical Engineer. Presently working as a HSE ADVISOR with an Australian Organisation BHP BILLITON PETROLEUM PTY LTD at ZAMZAMA GAS PLANT Pakistan. I have done various HSE Courses including NEBOSH Certification from UK.

I hold a JD as well as an MBA in finance and have been a land manager for mining companies for the last 10 years. I am very well trained at acquisition, due diligence, negotiation, sales, entitlement, permitting and construction techiques. I have excellent references.

A Mechanical Engineer with Masters Degree in Quality Assurance Technology (M.tech).IRCA certified QMS Lead Auditor; ISO 9001:2000, ASNT Level II in RI,MT & PT NDT techniques. Around 20 years professional experience in Manufacturing, Planning and QA/QC disciplines.

Business Analyst for some 15 years in the IT industry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out