Resume - Project Engineering, Project Management, Mechanical Engineering, Piping Engineer...

Misco Jobs

Resume #4365

CONTACT INFORMATION:
View contact information...

Date of Birth May 01, 1967
Nationality Canadian
Education o MBA / Technology Management, (Current), The University of Phoenix, Phoenix, USA
o B. Sc., Mechanical Engineering, Petroleum University of Technology (Abadan Institute of Technology), Ahwaz, Iran, 1985 ¡V 1991
Registrations, Affiliations and Memberships o Member of the American Society of Mechanical Engineers (ASME), 1995 ¡V 1997
o Member of the American Welding Society (AWS), 1995
o Member of the Iranian Society of Mechanical Engineers (ISME), 1994 ¡V 1996
o Professional Engineer Reg. No. 10 ¡V 04 ¡V 2300, Tehran, Iran, 1996
o Alberta Professional Engineers, Geologists and Geophysics of Alberta, in progress

Trainings ƒ³ ADNOC Group's Contractors' HSE Management System Awareness
ƒ³ Cathodic Protection of Pipelines
ƒ³ Welding Procedures and Radiographs Interpretation
ƒ³ Non destructive Testing and Mechanical Insp. of Refinery Equipment
ƒ³ Pumps
ƒ³ Industrial Hydraulic Systems, Production Line and Quality Control Methods
ƒ³ Safety in Oil Tankers and Industries
ƒ³ Protection Against Radiation in Industries

Knowledge of software programs Poses competent knowledge of following software programs:
o MS Projects o Caesar II
o Auto Pipe o AutoCAD
o Micro-Station PDS
o Micro-Station Design Review o MS Office Programs

Strengths ƒ³ Vast familiarity with oil, gas and Co-Generation industries, onshore and offshore.
ƒ³ Possess competent knowledge of International Codes and Standards.
ƒ³ Experienced in:
o Supervising large multidiscipline groups on EPCM projects, offshore and onshore o Preparing projects scope of work, execution plan and procedures manual o Change Management and negotiation skills o Review and approval of projects' deliverables o Providing technical supports and services to field personnel and construction managers during plants construction and start-up and also trouble shooting of systems during plants operation o Man-hour estimation, Tenders management, subcontracts review and scope of work definition in large projects o Controlling the planning and scheduling by utilizing MS Project, progress monitoring and preparing progress reports o Updating and modifying departmental procedures to increase the efficiency of work flow o Reviewing resumes, interviewing and hiring competitive Engineers, Designers and CAD operators o Mentoring junior Engineers and advancing their Engineering capabilities o Piping systems design and material selection o Stress analysis of piping systems in extreme services of temperature and pressure o Mechanical inspection of static equipment in refineries, petrochemicals, gas plants and drilling facilities and plants to assure their safe operation after maintenance and renovations
ƒ³ Possess competent knowledge of piping systems and experienced in developing detailed piping specifications for projects.
ƒ³ Demonstrate creativity, adaptive thinking and mature Engineering judgment in anticipating and / or solving complex or novel Engineering problems.
ƒ³ Researched on "Thermal Stresses in Heat Exchanger Pipes", the results of which were presented in the Sixth International Chemistry and Chemical Engineering Conference, in Iran.

Experiences VECO ENGINEERING Nov. 23rd, 2002 to date
Project Engineer
Responsible for the execution of the projects by managing multi discipline task forces, as per VECO Project Execution Manual.
ADCO ASAB Water Injection Upgrade
VECO awarded to do the Conceptual study and Front End Engineering and Design for upgrading the following sub-systems within the ASAB water injection system:
o Water injection network (interconnection between clusters)
o Disposal system for high TSS (Brackish) water o Corrosion inhibitor dosing system o Power skids and O/HL terminal pole/equipment (insulating switches and cables)
o Water injection surface pumps skids foundations including new shed and fence o Relocation of the mechanical seal package and SCADA shelter o All required piping modification
The total project value is estimated to be 2,000,000 USD.
ADCO Engineering for Tie-in of Single Gas Injectors BU-511 and BU-512 at Bu Hasa
VECO awarded to do the detail design and prepare the construction contract package for connecting these two single string gas injector wells to the existing headers running near the location of the new wells.
Total FinaElf Kharir Produced water Handling Facilities upgrade, FEED
VECO awarded to do the Basic Engineering Design for this project. The facilities under this project were designed to separate and treat 50,000 BWPD (produced water) for injection at 12,000 KPag. This project mainly involves FEED activities pertaining to the installation of the following major equipment:
o Inlet Separator o Filters o Hydro-cyclone o Water Injection pumping system o Oil recovery tank and pumping system o Control system o Power generation using Crude Oil as fuel o Instrument air compressor o Chemical Injection

TECHNIP-COFLEXIP, Dec. 1st, 2001¡V Nov. 28th, 2002
Abu Dhabi
Senior Lead Piping Engineer
Responsibilities as per Job Description included but were not limited to following:
o Responsible to the project for all the duties performed within the group o Administrative and technical management of personnel within the Piping drafting and Design and Piping Material and Stress engineering groups o Distribution and coordination of activities for specialist engineers and squad leaders o Responsible for budget, costs and schedule o Control the quality of all documents issued by the group o A list of tasks for proposals and contracts o Ensure that all methods and procedures are rigorously applied throughout the contract o Participate during the establishment of basic documents, specifications and standards for proposals and contracts o Coordination between T. P. G. and subcontractor design offices o Assist department head with training, advancement and assessment of personal o Improve the operation and function within the group o Develop working methods with the approval of the department head o Issue the necessary documentation and consultation for piping fabrication and installation o Ensure the uniformity of documents presentation and approve documents before issue o Establish the necessary liaisons with project, design coordinator and the heads of other sections and departments o Participate in coordination meetings and assist the project, concerning technical matters with the client, vendors and contractors o Compile the minutes of meetings, report to project and department head o Establish the closeout report at the end of contract. This report may be completed by the squad leaders depending on the importance and type of contract o Review and approve documents by Signing before being issued
Leading the Piping Engineering task forces and fulfilling above-mentioned duties, successfully have been working on following projects:
Saudi ARAMCO Sulfur recovery unit in Riyadh Refinery
As an EPCM project, Technip was awarded to do the Front End Engineering and Design endorsement and complete detail design and construction. The project included:
o Sulfur Recovery Unit o Amine Treating Unit o Revamp work in the existing units o Addition of 93 tie ins to existing process and utility lines o Addition of one sour water tank and two sulfur storage tanks o Loading bay
ADCO Bu Hasa Units "G" and "F+D" Development Project
Technip did the Front End Engineering and Design (FEED) of this project to inject Water And Gas (WAG) into Bu Hasa oil reserves for pressure maintenance. The facilities had to be designed to inject a nominal flow rate of 95 MMSCFD of gas at an injection pressure of 375 bars as well as 120,000 b/d of water at an injection pressure of 2000 Psi.
Shell, NPCC and NIOC joint venture Soroosh - Nowrooz Integrated Field Development Project, Khark Island, Iran
Front End Engineering and Design to Detail Design of the topside facilities of three production platforms, two living quarters and 2 wellhead platforms connecting together through four bridges.
As The lead on this project coordinated the work and scheduled the piping engineering tasks, to meet project specific dates. Implemented and used a detailed, per line, progress monitoring system linked to MS Project. Managed design reviews and interactions with the Client and the Project.

DELTA HUDSON ENGINEERING LTD., Oct. 6th, 1997¡V Dec. 01st, 2001
(JACOBS CANADA)
Senior Piping Engineer
Responsibilities as per Job Description included but were not limited to the following items:
o Responsible for the design and coordination work and leading the Piping Engineering Task Force on a project o Provides decision making and recommendations that are recognized as authoritative and with significant impact on engineering activities o Preparing piping Engineering specifications including line classes, detail piping component purchase descriptions o Developing detailed design and fabrication specifications for the project by utilizing the client and/or DHEL specifications o Preparing the technical sections of inquiries, reviewing tenders and making recommendations leading to the selection of vendors for piping specialties o Conducting stress analysis for piping systems and working with Piping Designers to achieve the workable solutions to problems o Review and sign piping Engineering documents o Ensure that piping Engineers assigned to the project are familiar with and follow related procedures o Developing complete knowledge of piping systems such as piping material specifications, code requirements, valve specifications and materials, and stress analysis programs o Preparing or assisting in the preparation of the cost estimates for bids and proposal work o Participating in departmental performance evaluations for piping Department staff o Assisting in providing technical advice to other levels of piping staff o Assisting in organizing and maintaining departmental design guidelines o Providing piping material Engineering support for pressure piping systems o Provide technical support/ consultation to projects during design and construction o When required on a project, coordinating checkout and start-up of field activities and coordinating work with Construction Superintendent o Assisting in organizing and maintaining departmental Engineering design guides o Ensuring compliance with departmental Engineering design guides and procedures o Advising the Piping Engineering staff in solving complex problems arising in different projects o Technical orientation of new Piping Engineering staff o When assigned by the Chief of piping design, carry out the responsibilities of a "Lead" on a given project including but not limited to the following:
* Developing and maintaining project scope and schedule and discussing areas of concern with the Chief of Piping Design and if necessary, the Project Manager
* Determining the detailed Engineering designs criteria to be employed by the design team
* Prioritize work and assign Engineering work to other members of the design team
* Ensuring consistency and integrity of design throughout project
* Complete project control information including project budget forecasts and progress reports
* Communicating with vendors and consultants regarding related technical problems (e.g. the substitution of specified materials)
* Attending project coordination meetings
* Coordinating design criteria with other disciplines and resolving any conflicts arising from requirements
* Maintaining regular contact (phone or site visit) with the Construction Superintendent regarding construction problems
* Developing estimates for change requests
* Assisting with design work
* In conjunction with the Piping Squad Leader, preparing the Project Wrap Up document
Leading the Piping Engineering task forces and fulfilling above-mentioned duties, successfully have finished following projects:
ESSO Imperial Oil Resources Ltd., Mahkeses, Cold Lake, Alberta
A two and a half billion dollar project. Front End Engineering and Design to Detail Design and Construction. The Mahkeses project is a new oilfield development that will add 46 Million cubic meters (287 million barrels) to proved reserves at cold lake.
Suncor Energy Inc. Suncor Millennium Project, Alberta
A three and a half billion dollar oil sand project. DHEL did the Preliminary Engineering, detail design and procurement for the Sulphur Complex of the Upgrading section at Suncor's Tar Island facility at Fort- -McMurray, Alberta
TransAlta/Air Liquid Dow Fort Saskatchewan, Alberta
Engineering, Procurement and Construction Management for the cogeneration facility with one General Electric 7EA Gas Turbine rated at 80 Site MW and one General Electric Condensing Steam Turbine rated at 40 MW
AMOCO Canada Petroleum Company Ltd. Empress Phase V Project, Alberta
Grass roots plant within an existing complex designed to remove ethane and natural gas liquids from natural gas. Natural gas is supplied to the plant from the Nova and Foothills Pipelines
Foothills pipeline Foothills pipeline
Designed the pipeline and pump stations for foothills pipeline

Novagas Clearinghouse Ltd. NGL Fractionation Facility, Redwater, Alberta
The project consisted of Front-end Engineering and Design (FEED) for a single train fractionation plant with De-Ethanizer, De-Propanizer and De-Butanizer towers, designed to process up to 60,000 BPD of liquids.

NATIONAL IRANIAN OIL COMPANY (N. I. O. C.) 1994 - 1997
MINISTRY OF PETROLEUM, (EXPORT CONTROL AND TECHNICAL INSPECTION AFFAIRS)
SENIOR MECHANICAL ENGINEER
Responsibilities as per Job Description included but were not limited to following items:
o Mechanical inspection of all installations and equipment owned by sections, industries and companies that are subsidiaries of Ministry of Petroleum, such as refineries, petrochemicals, exploration and drilling installations, upstream and downstream installations, during overhauls, emergency shut-off or routine maintenance, in-shore and off-shore o Doing required inspections to assure safe operation of equipment after maintenance and renovations o Determine the safe work duration of equipment and plants, and scheduling future technical inspection times o Supervision of technical inspection affairs and execution of new projects for exploration and production of petroleum products all around Iran o Calculating mechanical strengths based on related codes and standards o Prepare technical identification documents for equipment based on statistics prepared by technical protection section o Taking part in meetings related to technical inspection of equipment before and after overhauls, to plan the inspection, maintenance and estimation of required parts and equipment for procurement o Technical Inspection of all installations and plants related to exploration, production, refinery and petrochemical, inland or offshore o Technical inspections of offshore petroleum export platforms, fixed and portable cranes owned by all affiliated sections, industries and companies, in Iran o Detection of critical condition of equipment to propose methods for prevention of failures o Technical inspection of elevators and gondolas owned by Ministry of Petroleum o Technical inspection of pressure vessels and steam generators owned by ministry of petroleum in clubs, hospitals and buildings o Preparing technical inspection reports for minister of petroleum and related section management.
o Review the designs done by other national or international companies to assure their compliance with codes and standards o Materials selection and recommendation of new materials
Reported all works done as listed below to the Minister of Petroleum via Technical Inspection, Safety Department manager:
o Taken part and supervised technical inspection of static equipment in refineries during overhauls of Iso-max, Hydrogen, Vis-breaker, and other plants in Tehran, Tabriz and Isfahan o Checked the designs and detected the causes of failure in a fired heater in iso-max unit of Tabriz refinery after an explosion o Issued work orders for improvement and maintenance of refinery equipment o Provided technical support to different groups during overhauls in refineries o Inspected and reported the technical and safety condition of 32 drilling rigs owned and operated by National Iranian Drilling Company.
o Accepted and certified different industrial products before and after purchase for N.I.O.C.
o Inspected electric elevators and gondolas periodically and for acceptance.
o Proved capacity of oil tankers before and after loading crude oil o Translated a manual entitled "Safety Precautions in Oil Tankers" from English to Persian for N.I.O.C. staff use

NATIONAL IRANIAN OIL COMPANY (N. I. O. C.) 1991 - 1994
RESEARCH INSTITUTE OF PETROLEUM INDUSTRY
Mechanical (Detail Design) Engineer
Responsibilities were as follows:
o Actively participate in a team for detail design and stress analysis of plants for refineries and petrochemicals o Use AutoCAD, CAD Pipe and different SAP programs o Design and review general arrangement drawings o Prepare and review piping material specifications o Design piping and equipment layout plans o Design pressure vessels, shell & tube and air¡Vcooled heat exchangers as per international standards
PARS CRANE COMPANY 1993 - 1997
Mechanical Engineering Consultant
Working as a Mechanical Engineering consultant, designed and supported the manufacturing process of multi-speed hoists with 3.2, 5, 7, 10, 1, 20, 25, and 32 tons capacity. The major design works that needed to be done on each of the above mentioned capacity hoists are as follows:
o Gearbox design for multi-speed vertical movement, utilizing a supplementary gear box and electric motor (Fein Hub)
o Improving the clutch design for better engagement and longer life o Complete design of hoist body structure o Improving trolley design for better maneuver o Design of gearbox body using aluminum alloys for reducing total weight without compromising strength

JIHAD-E-KHODKAFAEI, Tehran, Iran 1991 - 1993
Mechanical Engineer
On a contract basis supervised the mechanical installations and maintenance group and finished following projects successfully:
o As an EPC project, Designed, Procured and constructed pressure vessels, piping systems, boiler room layout and sized unit heaters for hot water heating system of nearly 10,000-sq. m. roofed area o Designed and supervised construction of a 4 ton below zero and an 8 ton above zero refrigerating rooms o Supervised and provided technical support for material selection and purchase of equipment and components for above-mentioned projects

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 2282)

Go to Search Parameters...

Brief Description

Certified Project Management Professional (PMP), MBA with engineering degree, and over 15 years of hands-on diversified project management experiences. Large scale international oil and gas projects worked on include capital projects of up to $4 billion in offshore, upstream, and downstream.

International Logistics

I had worked as an operations/a terminal manager for 8 years respectively for Shell China Limited and Caltex China Limited. I think my working experience and performance may prove myself to be a veteran operations/terminal manager.

Interested i n a position where I can utilize my knowledge of drilling systems and equipment , particularly sub sea related engineering. I have good man management skills as well as general managerial abilities.

Looking for an exciting job in the field of Engineering where my knowledge and experience in the industry will be best utilized. To seek a challenging position as a QA/QC Inspector (Coating/Painting/Insulation) in a dynamic environment and desires to progress further in the same field and likes to g

Engineered stimulation and cement jobs and enhanced recovery work. Have training and development certification. Have extensive operations management experience. Have both upstream and midstream experience

Self motivated and experienced sales & marketing manager that always gets results

30+ years petro=chemical/construction QA/QC experience

IT specialist, professionally qualified in Management and Computers(M.B.A Information Systems, Masters degree in Computers, Bachelors degree in computers) with 9 years of proven hands-on technical and management experience.

Over 15 years of successful consultative sales experience in both the software application, enterprise level solution and service markets. Sales, sales management and business development positions held with a wide range of technology related and innovative solution based organizations.

Project Management/ Project Superintendent- Electrical & Instrumentation abilities- Construction/ Mechanical Completion of Offshore Production Facilities. Commissioning assistance during construction phase. managing personnel up to 200 E & I field craft.

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

Procurement of All Electrical & Instrumentation Items

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

8+ years of work experience in Project controls, planning and cost engineering in the Owner/operator as well as EPC role with the most recent being with Colt Worley Parsons Eng. Earlier to that I have another 7 years of experience in Electrical engineering design discipline with Stork Comprimo .

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

QA/QC Manager, QA/Manager, QMS 2000 Lead Auditor, Inspection of Oil/Gas Up-Stream, Down-Stream, Piping, Pipeline, GRP, Welding, Internal Inspection of Plant Equipments, manage Subcontractors, Bidding Evaluation, Preparation of QMS, PQP, ITP, Method Statements, Procedures

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

* Experience in reservoir management, reservoir evaluation, development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance, reservoir engineering, reservoir simulation models and interpretation, reservoir characterization,

I am an MBA student at College of Business School at Auburn University. I hold chemical engineering degree from India¡¦s Top Engineering School. I have strong reasoning and analytical skills. I have 3 years experience in Corporate Marketing with British Petroleum.

Experience in Machinery Design and Manufacturing Management. Seven years experience in Sheet fed Offset Printing Machinery Design. Masters degree in Mechanical Engineering and Management

project leader or senior engineer in oil , gas and petrochemical industries for projects and commissioning with middle ease, european and indian exposure for more than 13 years in production, operation, precommissioning and commissioning with smooth run and trouble shooting and DCS controls.

I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector having over 13 years of experiences in QA/QC Inspection of Corrosion Prevention Activities & Insulation Inspection for Oil & Gas Projects.

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I speak Russian.

16 years in oil ad gas industry ( drilling construcition,and production LNG, LPG, condenste and oil) , looking for HSE position

BE (Electrical) from VJTI – Bombay with rich experience in Contracts & Procurement, MM logistics, EPC Project Management, Sales tender, Profit & Cost centre Operations in career spanning 25 years in India and Overseas for Oil and Gas Process, Petro Chemical, Metal, Power, Civil MEI Infrastructure BU

Contribution Twenty Two Years comprehensive professional experience encompassing the succeeding different area of responsibility.

Project Engineering, Project Management, Mechanical Engineering, Piping Engineering

Provides guidance and professional support to senior management regarding business improvement, economics, key issues and present any suggestion to Senior Management and Shareholders. Establish and supervise the Balance Scorecard. Lead the team in the development of Working Systems. Work as a Projec

Have extensive back ground on ship safety inspection and Maritme industry

A highly qualified, talented and result driven marketing management professional, an AMIE and also holds a diploma in maintenance management with an experience of 15 years in the maintenance, Reliability Engineering as well as conditioning monitoring of rotating machinery. A dynamic, team spirited

Experience in project and construction management of EPC projects in the Oil and Gas Industry and building projects

Result driven senior executive offering over 29 years of experience and success in driving operational growth, leading start-up and turnaround efforts, maximizing growth opportunities and ensuring compliance with legal and regulatory requirements.

Sixteen (16)years of professional experience within Owner and Consulting companies in projects controls and business management for multidisciplinary engineering, procurement and construction projects for the industries, mainly in oil (upstream & downstream) and mining.

Materials Coordinator +-14 Years, Drilling Logistic, Materials Controller

A professional (M.Sc.degree) well qualified Instrumentation / Process Control Engineer, with 24 years in-depth design, management, consulting, maintenance, and teaching experience; PEO and APEGGA license.

Senior Landman/ Right of Way Agent

E&P Business Development Analyst

Contracts and procurement, contract administration, expediting, negotiation,

I wish to be a member of a dynamic company that has long-term goals and continuing challenges in meeting those goals. Would like to be a part of a company that has a true philosophy of co-operative effort where difficult goals and challenges are accomplished by team effort.

A fully qualified Freight & Logistics professional with international major hub experience across multi-modal freight combinations of ‘the supply chain’.

An International Teacher looking for an International Teaching Jobs.

Have about 12 years Experience as an QA/QC, Inspection Professional in Project Construction, Shut downs and Plant maintenance inspection activities of Process piping, tanks, structure and plant equipments of Fertilizer, Petrochemical, Oil & Gas and Oil Refinery plants, Pipeline.

EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987

Sales and marketing experience in consimer and industrial products 11 years experiences and 6months SAP-SD functional module experince as fresh.

Seventeen years diversified experience with 7years in Sales and marketing of Drill pipe float valves, Mud gate valves and Fluid End pump parts. Technical exposure and hands-on experience in well testing, Downhole testing and Production facilities.

Computer specialist with 15 years of experience in the IS field, with 3.5 years as an IS manager . Have exposure to almost all areas of IS.

More then 25 years in maintenance

Experienced Manager in the Automotive and Retail Industries

Strong analytical skills and knowledge of business practices, Ability to collect and document business requirements, Report Tools (Business Object, Report Developer etc), Relational Database Design and Development including Advance Stored Procedure, Function, Triger, cursor Procesing etc, Data Model

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out