Resume - Safety Manager Seeking Position

Misco Jobs

Resume #4395

CONTACT INFORMATION:
View contact information...

Qualifications:
* 22+ years Oil Field experiences both inland and offshore. Production and Construction.
* Authorized OSHA Instructor in General Industry Hazards
* Master Trainer National Center for Construction Education and Research (NCCER)
* Trainer for Petroleum Education Counsel Offshore Orientation and Petrochemical Safety
* Trainer Scaffold Building Certified by the Scaffold Building Institute
* Trainer in Red Cross First Aid and CPR, Trainer in Medic First Aid and CPR
* T-2 certified
* Computer literate with Microsoft Office Package
* Certified by the State of Louisiana as a Laboratory Technician
* Extensive Knowledge of Hydrogen Sulfide and related sulfur compounds. Have performed varied analytical techniques to measure the amounts of sulfur compounds from part per billion to 98 percent sulfur to include sulfur studies on various metals used for sampling of gas and liquid streams containing sulfur.
* Extensive experience in the sampling and analysis of oil, gas, water and soil samples to include reservoir fluid samples.

Experienced:
Safety Supervisor
Trainer
Laboratory Manager
Quality Assurance

History:

March 2001 to Present: Safety Director TCB Industries, Inc.

July 2000 to March 2001 Safety and Compliance Representative DC International contracted to Chevron U.S.A.

January 2000 to July 2000 Safety Trainer Stars Inc.

November 1991 To November 1999 Corporate Safety Director and Quality Control Administrator. Pencor Corporation

March 1981 To November 1991 Laboratory Technician SPL Inc.

December 1972 To March 1981 U.S. Army

Prior to 1972 Residential Construction while in School Used various types heavy equipment

Experience:
Current Employer: TCB Industries, Inc.
9521 Vorhoff
Abbeville, La. 70510

Supervisor: David Craig CEO

Currently I am employed as the Corporate Safety Director with job duties commensurate with job title. In addition to these duties I was given the responsibility of Personnel Manager in June 2003. This is a general oilfield fabrication corporation with approximately 160 employees. As the Safety Director I have the responsibility for all safety compliance to include training and reporting as required by regulations. I am also required to monitor job activities on various work sites. When needed I may also train other personnel to be Safety Observers for work site monitoring. I have developed a training matrix and have written materials to be used for this training. I have also written a safety manual and a compliance manual that has undergone severe analysis by our client base with no discrepancies noted. These items are available for review at any time.

July 2000/ March 2001 D.C. International Inc.
Lafayette, La.
Supervisor: Mitch Leblanc

Employed as a Safety, Environmental, Regulatory Compliance Specialist
On subcontract to Chevron U.S.A. with job duties commensurate with job title. This position was formed by Chevron as a pilot program to alleviate job hazards in a drilling environment. While filling this position I have been responsible for complete development of the program to include a system of checks and balances, reporting procedures, on-site required documentation, perform safety and compliance audits and reporting of the same to corporate support personnel. While on the job site it is also my responsibility to monitor all aspects of the operation and alleviate all job hazards as well as monitor the operation for possible violations of the NPDES Discharge permits and MMS, U.S.C.G. and OSHA rules and regulations. Monitor subcontractors to ensure they full fill the requirements of the contract and assist them with any issues that are found to be below acceptable standards. These standards include such items as Job Safety Analysis and work procedures, acceptance of critical components items and third party personnel and equipment, training requirements, Short Service Employee programs and Behavior Based Safety Programs.

01/01/00 – 07/04/00 STARS Safety Training and Regulatory Services
3660 Lormand Road
Maurice, La. 70555

Employed as a Safety Compliance Specialist. Job duties include Training of personnel in all aspects of OSHA and MMS compliance issues as well as assisting clients with safety audits and safety compliance issues.

11/1991- 11/99 The Production Enhancement Corporation
P.O. Box 926
Broussard, Louisiana 70518
Reported To: Owner and C.E.O. Bryan Sonnier

Last Position was as the Safety Manager/Quality Assurance Manager.
While in this position I was instrumental in acquiring the ISO 9002 registration for one company as well as wrote and implemented the program for three additional companies. Put into place a safety and training program which included writing an Environmental Safety and Health Training Manual as well as a Safety Manual. These programs where developed along the lines of the ISO 14001 guidelines for future registration.

As the Safety Director it was my responsibility to coordinate and perform training of laboratory and field personnel in a manner which precluded no reduction of productivity at a minimal of expense. Training included New Personnel Orientation, Fire Safety, Respiratory Protection, Hydrogen Sulfide, Office Ergonomics, Back Safety, Hand, Wrist and Finger Safety, Chemical Hygiene, Personal Protective Equipment, Eye Safety, Small Tool Safety, Hearing Protection, LockOut/TagOut, Confined Space Entry, Compressed Gas Cylinders, General Housekeeping, Electrical Safety, Fall Protection, Heat Stress, First Aid, Bloodborne Pathogens and CPR, Environmental Assessment, Hazard Assessment, Hazard Communication Right To Know, Handling and Transporting Hazardous Materials (HM126), Cranes, Rigging and Forklift Safety, PEC Offshore Orientation and Petrochemical Safety, Slips, Trips and Falls, Hazwoper Awareness. Sampling and Sample Handling of high pressure gas and oil samples.

Perform Safety Audits of the facility and report to management, maintain all safety and training files on personnel as well as maintain all records of hazardous waste activities.

Maintain and report all required documentation for OSHA to include annual OSHA 300 Logs and complete all questionnaire's for client requested information pertaining to Master Service Agreements and Contracts. Review same for compliance issues. Develop and initiate safety and environmental impact assessments and performance reviews to remain in compliance with MSA and Contracts. Provide Hazards Assessments of all operations and mitigation events to provide for a safe working environment.

It was also my responsibility to monitor the Drug Screening Program to ensure all pre-access and random screening was performed and to initiate and report findings of all accident investigations.

The last three years there were no reportable OSHA incidents within the corporation.

As the Quality Assurance Manager, it was my responsibility to monitor and record all data necessary to remain in compliance with the ISO 9002 program to include tracking and reporting all non-conformance reports, corrective actions and out of compliance conditions. Maintain a master list of all calibration, Maintain all measurement and test equipment used for calibrations, Establish calibration schedules and notify departments of pending out of calibration conditions, training of quality control personnel performing quality control functions as well as calibrate equipment when needed. Perform Quality Audits and report results to interdepartmental managers and corporate management, establish quality audit schedules. Perform all scheduled reviews of the Quality Management System and Report findings to Corporate Management.

As the Quality Assurance Manager I wrote and implemented a Quality Assurance Plan for the corporation that eventually helped us to obtain ISO 9002 registration. This program included all aspects of Quality Control from Hold and Testing Points to Process Control and Final Reporting, Calibration of Equipment and Maintaining Test and Measurement Equipment as well as maintaining required files and documentation.

Previous Job duties within the corporation included laboratory manager chromatography lab. This is where I began with the corporation while in this position I was able to re-equip the lab and increase productivity four fold. I trained all chromatography personnel in proper laboratory procedures, provided the knowledge necessary for proper application of chromatographic plumbing for various applications and performed troubleshooting and maintenance of chromatographic equipment. I initiated, designed, and implemented an ASTM physical properties lab as well as a basic water lab and trained personnel to operate this equipment and perform analysis with little supervision. Maintained all records and files for Quality issues and conducted all audits for Quality and Safety both in-house as well as customer required. I also initiated, designed, built and implemented a portable laboratory service. This service is now serving the industry throughout the world with locations in Russia, Angola, and Trinidad. This service includes the sampling and analysis of oil and gas samples as well as reservoir fluid sampling using downhole sampling tools. At this time the company grew from 12 employee's to 80. A joint decision was made between myself and the owner for me to turn my daily lab duties over to other personnel to give me more time to dedicate to Quality and Safety and Training Issues. This was not a demotion but a lateral transfer to relieve me of to great of a work load. A manager was hired to take over my lab duties and an in-house promotion of personnel was conducted to place a manager over the portable laboratory service.

Reason for Departure: Downsizing Corporation due to loss of business revenue's and increased competition.

Previous Employment: 1981-1991
Southern Petroleum Laboratories
Lafayette, Louisiana

While with this company I worked as a laboratory Technician with duties consistent with this position. These duties included field sampling of Oil, Gas, Water, Air and soil samples for compliance testing, air quality as well as accountability for volume and BTU values. Duties also duties included ASTM physical properties testing as well as gas chromatography where I performed all chromatographic analysis, troubleshooting, maintenance and calibrations. I maintained and operated a portable laboratory which I used throughout the southern regions of the United States and Offshore for on-site analytical services. Analysis included air monitoring, sulfur content, & BTU values locations associated with this sampling and analytical work included such varied area's as production platforms, drilling locations, sulfur recovery plants, landfills, fire investigations of building fires, propane and NGL plants. Maintained all required records and provided all data needed for Quality Related Audits. Assisted with Quality Audits by Clients.

1972-1981
U.S. Army
My last duty assignment was at Fort Hood Texas where I was in charge of the Base Petroleum Laboratory. My primary military occupational specialty was list as a 92C petroleum laboratory technician with a secondary MOS as a 76Y supply. My duties included all aspects of managing and operating the laboratory to include training of personnel. This laboratory was considered a Quality Control laboratory that analyzed samples of all fuels, hydraulic oils and lubricants purchased from private refineries for use at the installation. The analysis performed ensured compliance with purchase specifications. While in this position I implemented a training program that was still in use as late as 1995. This program included a system of test and evaluation of technicians on a weekly basis. Army wide testing of all personnel in this field conducted in 1980, the last year I in this position revealed the technicians under my direct supervision scored highest of all with scores exceeding the 93 percentile three of which were the three highest army wide scores. The average army wide scores were in the 80 percentile range. 9 years military experience, 8 active army with 1 year reserve duty, with courses in leadership, training, supply, first aid, Air assault and marksmanship.

1968 Through 11/72 Blissett Brothers Construction
Started with Blissett Brothers Construction as a general laborer in the apartment and residential building industry. While with this company I filled various positions for the completion of building projects from preparing the land as a heavy equipment operator using such equipment as tractors, backhoe's, bulldozers and dump trucks, preparing and pouring the concrete foundations, framing, roofing, finishing the interior, electrical helper plumbing helper and painter. I also worked as a paint crew foreman as well as a landscape foreman.
Reason for Departure: Joined the Army

Personal Data:
I am currently married with 3 children and 3 step children all of which are grown and out of the household.
I currently own my residence in Maurice Louisiana
Hobbies include fishing, hunting, horseback riding and carpentry
Born on December 7, 1954 in Dothan Alabama where I remained until joining the service in 1972. I am willing to relocate if required.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 2547)

Go to Search Parameters...

Brief Description

Quality Assurance Manager, ISO9001 and AS9100

As the Cost Engineer in one of the leading owner and operator of FPSOs, my main task is to provide effective cost control measures for the ongoing conversion projects. Good interpersonal skill is an important aspect as my role requires liaison with various parties of the hierarchy from

Coal Bed Methane Drill Site Supervisor

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

Landman

Senior Instrumentation & Control System Engineer in Oil & Gas; PMC, FEED and Detailed Design experience

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

25 years Experience Materials & Logistics, Base Manager, UK, West Africa, Middle East

Contracts, Services Manager, Wellhead Maintenace, Integrity Engineer, Senior Well Engineer

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

EHS Management Expert with 14+ years of Experience

I am 42 years old and Master Degree, currently I am still working for Valeinco as Logistic Manager and I ahave many experiences in Project Management such as Contract Services Manager, Project Manager and Project Coordinator and with my experiences I am confidence to be one of your candidate/staff.

Well Test and C&WI services, i.e., Coiled tubing, acidizing, sand control, wireline, Fracturing, cementing, well testing, slickline, e-line, perforation programs, down hole plugs, x-mas tree change outs, and other.

GRAUDATE.AND DIPLOMA HOLDER IN INDUSTRIAL SAFETY MANAGEMENT AND ALSO HAVE 6 YEARS 4 MONTHS EXPERIENCE.

20 years of HR experience in recruitment, remuneration, pay structure development, performance management, job evaluation, benefits, organizational design, employee relations, database management, leadership, management, facilitation, coordination

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

OBJECTIVE: Seeking full time employment with some reputed company in order to be able to play a major role in its activities and enhance my skills alike.

Reliability, maintainability & logistics, welding inspector, Mechanical engineer

Offshore Maintenance Supervisor FPSO Experience, Heavy Oil Experience

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries. machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

29 years experience in Quantity Surveying, Commercial and Contracts Management in the oil & gas, nuclear and petrochemical industries. Experience in all aspects of pre-contract engineering and post-contract administration under various contracting strategies and formats.

I’m interested in a Marketing Communications Director position. With over thirty years of experience, I can bring a high level of creativity as well as the ability to initiate and take small or large projects / events from concept to execution while managing all stages of the development.

I have over twenty years experience in procuring, coordinating and delivering all logistical equipment needed for drilling, construction and production for oil/gas and natural gas operations. Extensive experience in J.I.B. Exceptional ability in the skill of negotiating

Under balanced Drilling, UB Drilling, Air Drilling, OHSE Management, Operations Manager Drilling Consultant, Tool pusher

Result oriented Chemical Engineering Professional with a Post graduation in Management offering extensive experience of over 14 years in the Commercial and Government Market place. A broad experience base, with a proven record of success in Industrial projects

Drilling Fluids Cementing Logistics Marketing Management

14 years experience in Electrical Controls/Instrumentation field. PLC programming, Variable frequency drives, AutoCad, Electrical Codes, Industrial networks ProfiBus, DH+, DeviceNet

A Chemical Engineer with outstanding professional experience of more than 30 years in the manufacturing / Projects/Process engineering and HSE management in Petrochemical / Chemical/Fertilizer plants /Offsite and terminal complex.

13 yrs AWS CWI QA & QC inspection & management, industrial construction in major plant expansions & combined cycle power plants.

Started as Drilling Engineer. Project management expertise. Contract document prep & specs. Procurement of products/services/consultancy ,management of contractors/suppliers. Responsible for commercial, logistical, technical performance of jobs. Tendering, contract negotiations. Budgets up to £10m.

I am at present a Tool Pusher in Chad. IWCF Surface BOP Stack ; Current through 3/06 H2S Alive Certificate, Saudi Arabia Exxon Leadership Safety Training Workshop Eddie Bauer Problem Solving Certificate S.C.R. Rosehill Prodico Certificate

Objective: To obtain a management or Business Development position with a Service Company in the Oil Industry that will allow me to implement my engineering and management knowledge in Completions and Production

22 years of experience in the oil field trucks, cranes, forklifts, loaders, pickup's, passenger cars.

Safety Manager Seeking Position

Supervisory/Management position in a corporation promoting quality, team effort and excellent customer/worker relations. 20+ years supervising labourers, welders, & fitters on many different jobs and locations. Oil, Gas, Petroleum, & Pipelines. Many trips to Iraq in the 80's

Expediting Manager with 40 plus intermediate and senior Expeditor's with experience ranging from 250M - 5.6B Oil & Gas Projects.

Strategic Planning Business Development Project and Business Valuation

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

32 years Oil Industy experience in Drilling Fluids / waste Manging / Cementing / Drilling Engineering / Business Develeopment / Project Management. Degree. experience of Cpld weatehr, HTHO, deep water, H2S wells.

Advanced Landman focused on client's needs and demands.

Oil Executive

Perhaps you are looking for an experienced Security, Surveillance and Investigations Management professional, who is highly skilled in all aspects of highly sensitive investigations, corporate security, surveillance and asset protection?

Field Manager/ Operations Supt. with experience managing international oil/gas projects.

Inspection high pressure vessels and supervision pipe-lines in Europe. Quality Assurance & Quality Control in nuclear power plant - crew 7 people. Quality Control, punching, hydro-testing of pipe systems - crew 10 persons.

I am a driven and focused individual who knows how to set goals and work to achieve them. Outstanding skills/competencies in Materials Management, Inventory Control and Accounting. Pro-active and results-oriented with the talent for identifying and solving problems.

Over twenty-four years of professional experience as a planner, scheduler, estimator, project engineer and supervisor in the industrial construction, maintenance and turnaround fields of the petrochemical, paper and pulp, power generating textile manufacturing and offshore industrial industries.

Proven ability in Purchasing, Expediting, Procurement QA/QC Coordinator, Material Control, Material Coordinator, Logistics and Warehousing. Developed and implemented Material Control and Warehouse Procedures. Proficient in SAP, MS Word and Excel. Bilingual, fluent in English and conversational Thai.

Over 30 years of experience in refineries as craftsman, mid-level supervisor. Since taking early retirement from Chevron in California, I have taken positions mainly as client field construction QA representative on projects of millions of USD's. Also worked as DBA D.J.A. Consulting.

RESIDENT CONSTRUCTION MANAGER / SUBCONTRACTS MANAGER / CONSULTANT IN CONSTRUCTION OF PETROCHEMICAL PLANTS (SPECIFICALLY HYDROGEN /SYNGAS REFORMERS, ETHYLENE CRACKING FURNACES, PETROCHEMICAL UNITS INCLUDING DETAIL PLANNING AND EXECUTION OF SEVERAL PLANT TURNAROUNDS PROJECTS)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out