Resume - This is to register my availability for contracts in the function above as detai...

Misco Jobs

Resume #50479

CONTACT INFORMATION:
View contact information...

RAY SCULLY DipSM. MIIRSM

PROFFESSIONAL HSE ADVISOR
26 YEARS OIL FIELD EXPERIENCE * 12 YEARS SAFETY EXPERIENCE * 4 YEARS PROJECT SAFETY MANAGEMENT EXPERIENCE

Profile – Full Member of the International Institute of Risk and Safety Management (MIIRSM)
Experienced and Qualified in Safety Management Systems and Techniques
Familiar with Accident/Incidents Investigation, Reporting and analyzing statistics / trends
Ability to Devise and Implement Safety Control Measures
Ability in providing HSE information, instruction and training to personnel
Fully conversant with HSE legislation, regulations and safety procedures
Proactive in Promoting, monitoring and enforcing HSE requirements to subcontractors
Prepare and Review Project Risk Assessments and Studies
Ensuring SIMOP,s are conducted safely and in accordance with procedures
Also Experienced and fully qualified Rigging Supervisor
Able to construct, test, inspect and certify safety performance of rigging equipment
Familiar with the operation and safe control of all kinds of heavy lifting gear

Other Information
I have also managed deck operations (Platforms, barges and jack-ups), worked closely with diving teams, drilling crews & welders for pipelaying, controlled barge & crawler movements in cable laying and trained overseas workforce in the safety of rigging/marine operations. I also have experience working with multi national workforces.
Fully experience in steel erection, In the safety of removal and replacement of large vessels and plant in heavy industrial settings and Erection of structural steel work to approved code of practices.

CAREER
CHEVRONTEXACO WEST AFRICAN GAS PIPE LINE PROJECT (WAGP) GHANA FEBRUARY 2006 TO PRESENT
HSE SAFETY SPECIALIST ADVISOR BASED GHANA TRAVELING TO TOGO / BENIN /AND NIGERIA
* Reviewing and revising contractor HSE plans and procedures
* Monitoring contractor HSE performance and acting upon non conformance
* Advising on and implementing safe management systems
* Proactive as a team leader in promoting company objectives Incident and Injury Free ( IIF )
* Supervising and mentoring HSE advisors and inspectors
* Attending HSE meetings and taking part in presentations internally and with contractor in various locations Ghana / Togo / Benin / Nigeria
* Accident and incident investigation root cause analysis and corrective actions
* Involved in HSE audits and inspections for premobilisation of mechanical equipment including barges/tugs

EN IRAN BV SOUTH PARS PROJECT IRAN AUGUST 2005 TO FEBRUARY 2006
Senior HSE Advisor – Assaluyeh, Iran LNG Gas Plant Phases 4 and 5
* Chairing daily internal HSE meetings and attending client periodic HSE meetings
* Prioritising safety issues and delegating work load to safety officers and technicians
* Responsible for briefing/de-briefing and coordinating the execution of Emergency Evacuation Drills
* Ensuring that contractors conform to ENI safety policies and practices and dealing with safety violations.
* Involved in Accident/Incident investigation and root cause analysis.
* Inspecting work sites, preparing reports. Ensuring SIMOP's operations are conducted in a safe manor and in accordance with procedures
* Supervising the periodic inspection of safety equipment recording and reporting defects as action items
* Identification of specific training needs and sourcing training material and specialist tutors.

COSTAIN OIL & GAS Abu Dhabi WLL/ DAS ISLAND Abu Dhabi UNITED ARAB EMIRATES MAY 2005 TO JULY 2005
Leading HSE Advisor Major Overhaul Train 2 for ADGAS Abu Dhabi UAE
* Managing team of area HSE Officers, co-coordinators and HSE Technicians on LNG major overhaul.
* Involved in developing a Emergency Evacuation Plan and carrying out Emergency Evacuation Drills
* Studied and Reviewed Risk Assessments, carried out Advanced Safety Audits, Daily Safety Inspections, Safety Tours, Task Briefings and involved in Devising Tool Box Talks
* Identifying Training needs and giving safety information and instruction
* Promoting Proactive HSE awareness
* Implementing and monitoring safety control measures
* Working with outside agencies: Fire Brigade, Police, Hospital and Environmental

BAKER / OTS for BESORA OIL SERVICES / MALABO EQUATORIAL GUINEA DECEMBER 2001 TO MARCH 2005
H.S.E. Advisor Port of Malabo for cargo handling and heavy lifting
* Supervising the safety of all lifting, transportation and associated operations on behalf of three major oil company's (ExxonMobil / Marathon Oil / Triton Hess)
* Attending safe cargo handling and heavy lift meetings with all major oil and service company's to discuss safety polices, risk assessments, safety procedures and certification
* Investigating and Reporting on accidents / incidents and near misses, implementing control measures to prevent reoccurrence
* Responsible for the presentation of safety meetings, tool box talks and training for lifting operations.
* Present at all lifting above 10tons and responsible for pre lift safety briefing.
* Advising on storage and use of chemicals/ hazardous substances under the COSHH Regulations

TOTAL FINA ELF SOUTH PARS PROJECT IRAN MAY 2000 TO APRIL 2001
* Rigging/Heavy Lift Superintendent – Assaluyeh, Iran, LNG Gas Plant Phases 2 and 3
* Working for Total on behalf of the client (P.O.G.C) Persian Oil & Gas Company
* Supervising the Safety of Heavy Lifting operations carried out by main contractor Hyundi and sub contractor Mammoet Heavy Lifting and making sure safety regulations were adhered to.
* Reviewing Rigging studies and Transportation plans, Method Statements, Scaffolding requirements
* Attending daily Progress meetings with Total Senior Management
* Advising main contractor on Safety and Rigging Procedures also on safety legislation and regulations
* Also present at all Lifting above 40 tons and critical Lifts i.e the use of two cranes or more

SEAWELD ENGINEERING/MOBIL OIL EQUATORIAL GUINEA OFFSHORE PROJECT (FPSO) OCT 1999- APRIL 2000
Rigging Supervisor- West Africa construction & Maintenance on Production/Storage Vessel
* Supervising multi-national workforce on rigging/heavy lifting operations
* Advising client Mobil Oil on safety and producing method statements and risk assessments
* Attending morning meetings with Senior Management to plan, schedule, and prioritise work
* Responsible for rigging equipment certification/inspection and correct safe usage
* Also responsible for on the job and classroom training and safety awareness of lifting equipment

COSTAIN OIL, GAS & PROCESS LTD/BRITISH GAS, TUNISIA APR 1999 – JUL 1999
Rigging Superintendent – Hannibal Gas Treatment Plant shutdown
* Supervising all heavy lifting/crane operations on behalf of British Gas, onshore and offshore.
* Advising client on cranage, rigging and Scaffolding equipment requirements.
* Working with senior management to plan, schedule and review operations
* All rigging procedures, producing method statements, risk assessments and safety awareness training
* Also responsible for on the job safety training and the issue of permits to work and giving briefings to British Gas management prior to heavy lifting operations.

TIGER STEEL ENGINEERING LTD, DUBAI OCT 1998 – FEB 1999
Rigging/Erection Manager, Dubai Airport expansion project
* Brought in to manage night shift on behind target operation to erect all main steel structures; project brought back onto target and completed on time.
* Sole night shift manager (with multinational workforce of 80), responsible for performance and quality
And safety part of senior management team of Superintendents, Engineers & Inspectors (attending daily project management meetings, weekly progress and client meetings).
* Managing all rigging; structural steel erection, crane operations, welding & fabrication;
Scaffolding, Painting/fireproofing; transportation all under strict Airport safety regulations
* Seconded to day shift to manage extremely challenging operation to erect steel in an underground tunnel; connecting two terminals; prepared method statement and programme (accepted by client).

CAMMELL LAIRD SHIPBUILDING, BIRKENHEAD AUG – OCT 1998
Rigger, drill ship refit for Falcon, USA
* All heavy lifting/crane operations (800 ton max); rigging loft work; inspection of lifting equipment;
Ship's rigging (cranes, cargo derricks, lifeboat wires); testing these.

LOYAL GROVE ENGINEERING (for GEC ALSTOM) APR – MAY and JUL – AUG 1998
Rigger – nuclear shutdown (Hartlepool)
* Intricate job, extracting turbine rota shaft and dismantling/rebuild of turbine generator, cladding, valve, pumps and motors.

McIVOR & SONS, BIRKENHEAD MAR – APR and JUL – AUG 1998
Rigging Supervisor – shutdown refurb. N. Wales cement plant
* Advising clients on cranage requirements, work procedures, inspection & safety; supervising the dismantling and re-erection of steelwork, kilns, vessels, silos, and pipework.

AMEC POWER & ENERGY, DARLINGTON FEB – MAR 1998
* Rigger – shutdown, Aromatics Plant at Shell Refinery, Stanlow
* All heavy lifting operations; dismantling/refurbishment of tube bundles, vessels, valve & pipework (under very strict safety regulations); commended by Shell Operations.

M.S. AL-SUWAIDI, KSA MAY 1997 – FEB 1998
Project Superintendent: Rigging/Steel Erection - $450m gas plant extension
* Managing all rigging/erection of structural steel, vessels and mechanical equipment (to 1000 ton) on
Behalf of Saudi Aramco (Uthmanaya); manager for 120 multinational subcontract staff including
Engineers, foremen and multidisciplinary technicians.
* Planning and scheduling; safety management and inspection of equipment.

CHIYODA CORP., PERTRAMINA LNG EXPANSION PROJECT, BONTANG, INDONESIA JUNE 1996 – MAR 1997
Rigging Engineer/Superintendent – LNG plant
* Controlling all rigging and mechanical erection as superintendent of sub-contract labour on behalf of Pertamina; manager for 180 staff and involved in design consultations.
* Working alongside senior project professionals (Site Manager, Superintendents, Engineers) to plan and schedule works and review procedures; Key figure in safety management/inspection of equipment.
* Project included the logistics of transporting all heavy equipment inland under challenging conditions.

MCIVOR & SONS, BIRKENHEAD APR 1995 – MAY 1996
Rigging Supervisor – shutdown/refurbishment – chemical & cement plants
* Supervising and dismantling and re-erection of kilns, vessels, silos, pipe work and structural steel.
* Advising clients on cranage requirements, work procedures, inspection and safety.

AL MANSOOR FOR GASCO, RUWAIS REFINERY, ABU DHABI 1994 – APR 1995
Heavy lifting Supervisor – Site Manager – Gas Refinery
* In Liaison with engineering and site supervisors and managers, controlling all heavy lifting operations, accessing/hire of cranage and other equipment, safety and inspection, PTW; scheduling of priority lifts.
* Additionally responsible for personal/life support for 52 multinational staff, including performance assessments and induction briefings for all lifting recruits.

MCIVOR & SONS, BIRKENHEAD OCT 1993 – DEC 1994
Rigger – shutdowns/refurbishment – chemical & cement plants
* Short contracts on shutdown & refurbishment work at Castle Cement, Mold & Kemira Fertilisers & Chemicals: dismantling/re-erecting large kilns, vessels, silos, cooler tubes, pipework and structural steel; including interior fin & wear plates.

LOYAL GROVE ENGINEERING, STAFFS SEPT – OCT 1993
Rigger – nuclear shutdown
* intricate job, extracting 80 ton rota shaft as well as dismantling turbines, cladding, pipework, valves pumps, motors & 5 ton brackets for Wylfa power station rebuild.

AKER LASALLE OFFSHORE LTD, ABERDEEN 1985 – 1993
Deck Foreman/Rigger/Helideck Operations – offshore N. Sea – on all Ninian Field platforms
* Originally involved in rigging/erection of fabricated steelwork and pipework.
* Invited to join deck crew as Foreman; controlling all deck operations, cranage, slinging, heavy lifting plus all helideck operations for supplies & passengers.Under Chevron safety regulations

LAND & MARINE ENGINEERING (OFFSHORE) LTD, BROMBOROUGH 1984 – 1985
Rigging/Deck Supervisor – UK offshore and Channel cable laying barge
* Offshore barge-based control of heavy lifting – pipes ready for welding.
* Cable laying including manoeuvring a 200-ton cross channel trenching crawler machine: heavy lifting, anchor handling and wire splicing.
* Rig Supervisor – offshore Sri Lanka
* 6 months in Sri Lanka, training and supervising local personnel on a jackup rig and managing the service barge and supplies from onshore, all deck and marine and subsea operations.

GREENFIELD & PAYNE (G.P.D.) LTD., BIRKENHEAD 1983 – 1984
Rigging/Erecting Foreman – oil/petrochems
* Supervising riggers, erection, scaffolding & Cranage for petrochems shutdown/refurbishment (tanks & vessels) Burmah Ellesemere Port & Lubrizol Bromborough

STANGATE WELD ALL (OFFSHORE LTD., ABERDEEN 1981– 1983
Rigger – offshore North Sea Construction and Subsea Operations
* Ninian South construction & deck operations inc. diver support; strict permit to work system.

HOLLIDAY HALL & CO LTD., STOCKTON 1978 – 1981
Rigging Foreman – Sullon Voe oil terminal construction
* Supervising 8 riggers, 3 crane drivers, wagons and low loaders; transportation, lifting and positioning of heavy electrical plant in daily consultation with project managers and prioritising/scheduling.

WESTERN SHIP REPAIRERS, BIRKENHEAD 1969 – 1978
Qualified Rigger after Apprenticeship – all for Cammell Laird
* In rigging loft, making and testing rigging equipment, stamping safe working loads; splicing wire, smelting, tapering and fibre rope work regular duties inspecting and reporting on lifting equipment.
* Also ship's rigging: cranes, cargo derricks, lift and lifeboat wires etc.
* And steel erection, positioning of pipework and heavy plant.

OCEAN FLEETS (BLUE FUNNEL) 1967 – 1969
Junior Seaman from Deck Boy – Merchant Navy deck hand – cargo vessels worldwide.

QUALIFICATIONS
DipSM. A diploma in safety management gained with the British Safety Council (January 2005)

Apprenticeship in Rigging gained with Western Sip Repairers (part of the Cammel Laird group) 1971.

PROFESSIONAL MEMBERSHIP
A full member of the International Institute of Risk and Safety Management (MIIRSM)

TRAINING
Advanced Safety Auditing (ASA) training ADGAS Das Island UAE 2005
Achievement Award for Stop Supervision a DuPont Safety Training Observation Program 2002
BEH Certificate for Sabre Centurion and Sabre Flite Airline Escape Breathing Apparatus 1998
Overhead Pendant Crane ISO 9001 Credited Cert 1998
Permit To Work Training Cheveron UK Limited cert No 782 1991
Helicopter Firefighting, Montrose Offshore 1991 and 1989
Offshore Refresher, Fleetwood Survival Centre 1990
Offshore Fire Training, Montrose 1989
RGIT Offshore Survival, Firefighting & 1st Aid – Cert No. A45C 1984

BIRKENHEAD TECHNICAL COLLEGE 1969 – 71 (D/RELEASE)
Apprentice Training in Shipbuilding – Qualified Rigger, Rigging Loads, Crane Maintenance & Inspection

FLEETWOOD NAUTICAL COLLEGE 1971: Rigging and lifting calculations

British Rope Works course on splicing wire & wire construction/maintenance 1970

Mersey Docks & Harbour Board ship repair and dock/lifting regulations 1971

PERSONAL
Married with an adult daughter Date of Birth: 6th May 1952
British
F/C Driving licence
Fit ex-gymnast
Full medical September 2005
Interests: outdoors (keen cyclist, wife also); entertaining & dining out.
Referees on request r skills and qualifications.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 2286)

Go to Search Parameters...

Brief Description

10 years experience in, Gulf of Suez Petroleum Company the joint venture partner with BP in Egypt.

Senior Executive with Board Experience

Chemical Engineer, with extensive experience/training in environmental, health, safety and quality management systems. International experience. Fluent in Spanish, English and Portuguese. Management skills.

Electrical Engineer and MBA with over 12 years Power and Water sector Commercial related expereince

Over 15 years of experience with reputed SABIC affiliates & International companies like Flour Daniel , Deutsche Babcock Idea Ltd. , E.I.D Parry Fertilizer & Chemicals and Protech Ltd. in important positions like Mechanical Engineer, Mechanical Superintendent, Manager mechanical etc., with increasi

I have extensive years of experience as a document controller here in Malaysia and in Philippines.

Engineer (Microsystems) / Master in International Business / trilingual french german english with 5 years work experience.

Supply Chain, Procurement, Logistics,Sales, Administration, Purchase,buyer

Contract Engineer (5 year oil and gas experience)

I am extremely interested in working in Australia, either as a client rep or contract rep. My background and experience qualifies me for several positions, such as; Project Engineer, Planner/Scheduler, QA/QC, E&I, however, my main interest is Fabrication Manager or Project Manager.

To expand my knowledge, enthusiasm & ability by assuming a position of higher responsibility, with the qualities of adaptability, dynamism & perseverance.

Corporate Executive with extensive international experience (in 8 countries across 3 continents), in Business Development & Sales (especially Consultative/Technical Sales of Technology Products & Services), International Marketing, Customer Relationship Management, Risk Management, Strategy Analysis

Chemical Engineer 1990 NIT Raipur ,Continuous Polymerization,Black Belt Six Sigma,Lead Auditor ISO 9001,14001

Fire/Safety Advisor, 32 1/2 years petroleum experience

Over 30 years of Management/Supervisory experience in drilling and production of oil, gas and geothermal. With a total of 35 years of experience:

I am an Experience British engineer with over 15 years of diverse engineering experience, currently working for SHELL, as an Interface Manager for the Bonga SW, 7BUSD Project. I do have strong analytical and judgemental skills, strong team player. Capable of organizing and motivating technical emplo

This is to register my availability for contracts in the function above as detailed in the enclosed CV, U.K. or abroad. My most recent projects, all at senior level with direct bearing on Proactive HSE, Project Methodology, Quality and Timing have included.

My background is Legal Business Dept of Faculty of Law, University of Indonesia

Construction Manager

A highly motivated, adaptable and resourceful Naval Architect and MBA (Finance and Marketing) with around Fourteen and half (141/2) years of experience in all facets of tender / contract administration, proposals and estimation in Oil & Gas, Ship Repair and New-building in Middle East and India,

Safety Pro with a wide range of experience in the oil and gas sector both on and offshore

Over Fifteen years experience in the execution, engineering, tendering and management of offshore construction projects in the Middle East Asia, India and Caspian Sea regions at various levels of responsibility within the organization.

I have fifteen (15) years of professional experience in Project Control activities as a Senior Planning/Scheduling/Control & Cost/Contracts Engineer in multidiscipline projects. My experiences have been in the Oil & Gas Industry, Infrastructure Development and Building Construction.

M.SC chemistry with painting inspection experience

7 years working experience in Logistic, roven hands-on experience in many different logistic areas, from Project Planning, Development and Implementation, HSE regulations, Financial Administration, HR management, Purchasing and Supply chain, Warehouse processes and Transports, Camps and Offices set

Electrical, planning and IT

Material Management, Inventory control, Procurement, follow-up,Procurement Planning etc

A visionary executive with 16 years experience and proven history of outstanding performance in Industrial automation & Instrumentation in Project Design, Application and Development. Dynamic, skilled specialist with excellent record in Power, Refinery, Oil & Gas, Polyester, propylene, Pulp-Paper

Bachelors degree in Civil Engineering with more than 15 years experience in project engineering, construction and project controls with international exposure in oil and gas sector and other areas which encompasses the functions of planning, budgeting, scheduling, schedule controlling.

Senior Contracts Manager - 25+ yrs experience in Power Plants, Airports, Water Treatment Plants, Major Civils and pipeline projects in Malaysia, Pakistan, Gibraltar, UK. Contract preparation and management ( EPC & Supplier )plus broad knowledge of planning, costs controls and project mamagement.

Experienced Cad Manager/Project Coordinator. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProcAdam. Engineering background - Structural/Civil.

Over twenty-seven years of domestic and international experience with a broad range of pipeline, oil and gas, and associated facilities projects.

chronological resume last updated April 12, 2004

PMP,MBA with 20+ years experience in accounting management in multi locations and foreign country experience. Energetic, creative, self-starter with consistently demonstrated leadership, strong analytical and problem solving skills

20 yrs in Oil/Gas Operns, QC/QA, Inspn, Constn and HSE matters. Specialty in HSE Man't wrt Leading and setting up of HSE teams, training, Audits and compliance to standards. Interfaced on behalf of client with intern'l contractors e.g. Technip, Toyo, Kvearner and Bechtel.

31 years experience (10 years international)in project and contract management of large scale industrial projects in the oil & gas (onshore & offshore) alumina, petroleum, brewing, iron ore, nickel, gold and general mining industries.

I am a safety minded well versed toolpusher with 26 tears experience in the oilfield. I have worked on all sizes of land rigs in various parts of the world. I am currently looking for a similar position or even as a company man.

Free! Coal Geologist/Geotechnical Engineer

Driller/Drilling Manager

Drilling Superintendent, Rig Manager, Operations Manager

Working with GS Eng. & Const. Co. as Commissioning Superintendent for Ras Laffan Refinery project, QATAR.I have strong expertise in the area of pre-commissioning, Commissioning, Initial start up, stabilization of the process and operations, trouble-shooting & achieving production tgt

Project Engineering and Management within and Oil and Gas Industry

Drilling Engineer, Supervisor, Superintendent

Mechanical / Electrical experience in Boilers, pumps, HVAC Systems, Compressors, steam systems and ancillary services, DHW skids, Chillers, Cooling Towers, Clean steam Boilers, Purified Water Systems, waste water, Low voltage Electrical Systems, Preventive Maintenance Systems.

I have earned 20+ certifications and growing. Is attached to my resume.

Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.

I have done Master from M.Sc. Chemistry. I worked in Shell Pakistan Ltd. as a Q.C.Analyst.

WORKING AS ASSISTANT MANAGER - PRODUCTION / SHIFT INCHARGE IN A LEADING PETROCHEMICAL COMPANY AT IMPORT, STORAGE & HANDLING TERMINAL

Senior Instrumentation & Control System Engineer in Oil & Gas; PMC, FEED and Detailed Design experience

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out