Resume - Over 20 years of experience in a career, dedicated to the provision of engineeri...

Misco Jobs

Resume #61307

CONTACT INFORMATION:
View contact information...

Have provided these services for a wide variety of projects. Have "hands-on" experience with repair, upkeep and maintenance work on Caterpillar gen sets/diesel engines,Cummins diesel engines,various pumps,cranes,hydraulic systems and diesel driven equipments.(Hydraulic power packs and high pressure compressors)Predictive and preventive maintenance management experience includes operational aspects of workshop. Liaison with clients, technical advisors & sub-contractors.Chance to be involved with "MEX", "MAXIMO","ET" and "VIMS" maintenance software.A good knowledge of safety regulation,best practice and strong commitment to safety. Have years of practice with Parts / Warehouse Management, Documentation, Vendor Evaluation & Selection and Procurement. Knowledge on ISO QA /QC requirements.

In addition, with expertise in the following: Supervision/Operations/Trouble Shooting/Training on many different remote sites and guidance of multi – discipline,multi-cultural national staff in Indonesia and Solomon Islands for Maintenance Engineering,Mining,Power and Service Companies.

Have been commended as honest,ethical and hardworking staff, very much ready to take on new challenges and find the most cost effective arrangement. I am versatile,proficient and diligent in my work. Build good and efficient workforce.Strong communication skills, adaptable to change and change management processes,lead, coordinate and work well as part of a team.Work to deadlines and my position required me, to be a fast learner on new systems.My skills enable me to use Parts Manual, Service Manual and understand Mechanical drawings.Am knowledgeable with MS Word and MS Excel.Well versed with Technical Terms.

During the above Employment periods my relevant duties and responsibilities related to Maintenance Engineering,Mining and Power included;

1. Preparation of procedures for mechanical installation, testing, commissioning and maintenance.
2. Supervision of mechanical installation work activities.
3. Inspection of mechanical installation work ongoing to completion.
4. Supervision of testing and commissioning of all mechanical systems.
5. Supervision of equipment performance tests.
6. Supervision of plant operation and preventative maintenance programs.

2005 - 07, Mechanical Construction Commissioning Engineer. – Black & Veatch,Indonesia.(EPC)
Verification of construction completion as well as coordination,scheduling and execution of the commissioning program in support of an aggressive startup schedule for the 2 x 660Mw Tanjung Jati "B" Power Station in Indonesia.Coordination and liaison with the client, technical advisors and sub-contractors pertaining to the coal system,including ship unloaders,stackers, reclaimers, crushers, vibrating screens, silo filling trippers,static& rotating equipment and several kilometers of coal conveyors.Coalyard VOLVO wheel dozers and dump trucks.Water treatment plant with WARMAN pumps.

2005 - 05, Commissioning Engineer, - Roberts & Schaefer, Indonesia.(EPC)
Verification of the construction completion for the coal handling system of the 2 x 660Mw Tanjung Jati "B" Coal Fired Power Station.

2005 - 05, Mechanical Construction Advisor, - PT Roberts Schaefer Soros, Indonesia.(EPC)
Coordination, start-up,commission and handover of all mechanical equipments and the coal handling systems, including static & rotating equipments,3.3km conveyor belts,drives,sizers,metal detectors, sampling systems,belt scales,trippers,drawdown hoppers and surge bins.

1999 - 2004, Mechanical Superintendent, - PT Indonesia Bulk Terminal, Indonesia.(Mining)
Responsible for the maintenance, repair and efficient operation of the terminal. Deputized for the Terminal Manager as and when required by the company.My staff included 4 professionals and support personnel. Not only was I responsible for the managing those individuals,directed all recruitment and hiring activities,set salaries, facilitated annual performance reviews and projected long term staffing requirements.Training of the Indonesian mechanical staff.Responsible for the implementation of a planned maintenance system ( MEX ) and breakdown maintenance of the plant including the following plant and equipment:-Inloading Liebherr cranes, hoppers, belt feeders and conveyors.Outloading reclaimers, conveyors, sampling plant/hydraulics/pneumatics and shiploaders.All mobile plant including Caterpillar D10 / D5 bulldozers, Caterpillar motor grader,Caterpillar wheel loader, Franna crane, Bobcat skid loader, light vehicles, Lincoln Diesel Welding Machines and Nissan / Izusu trucks.All mechanical aspects of the power station including Caterpillar 3500 Series diesel generating sets.Water treatment plant.

1997 - 99, Mechanical Superintendent, - Balikpapan Coal Terminal, - Indonesia.(Mining)
Duties include all maintenance, repair and efficient operation of the terminal.To take full responsibility of the terminal operations, in the absence of the Plant Controller.Selection and recruitment of suitable mechanical personnel for the efficient operation of the terminal.Training of the Indonesian mechanical staff. Prepare yearly budget for the department.Responsible for the implementation of a planned maintenance system and breakdown maintenance of the plant including the following plant and equipment:-Inloading Liebherr cranes, hoppers, belt feeders and conveyors.Outloading reclaimers, conveyors, sampling plant and shiploader.All mobile plant including Caterpillar D9 / D4 bulldozer,Komatsu Dozers, Bobcat skidloader, Franna crane, IR Air Compressor, light vehicles and IZUSU truck. All office, messing, accommodation and maintenance of building.All mechanical aspects of the power station building including Caterpillar 3400 Series diesel generating sets.All freshwater and utility pumping systems.Organize mechanical shift manning roster.To prepare annual performance appraisal of personnel.Monitor all fuel & lubrication delivery and consumption.

1996 - 97, Workshop Manager, - PT Hari Sawit Jaya, - Indonesia.(Agriculture)
Employed to be responsible for the repair, upkeep and maintenance of all mobile & stationary equipments.Selection and recruitment of suitable staff for the workshop. Training of the Indonesian staff. Responsible for the implementation of a planned maintenance system and breakdown maintenance for the following:- IZUSU/MITSUBISHI dump trucks, FORD tractors, trailers,CATERPILLAR excavators, DYNAPAC compactor, CATERPILLAR motor grader, CATERPILLAR bulldozers, light vehicles, GM/Cummins generating sets and various other equipment & machinery.All freshwater and utility pump stations.The operation of the warehouse.Requisation and purchase of required spares.Prepare yearly budget.

1994 - 96, Branch Manager, - Poliperkasa Sdn.Bhd, - Malaysia.(Oil&Gas)
Promote and market the company's products and services to the Petrochemical, Oil & Gas and Power Industry.Procurement of parts and services for the above industries.

1991 - 94, Maintenance Supervisor/ QA-QC. - Excel Oilfield Manu.Services, - Malaysia.(Oil&Gas)
Supervision of all maintenance staff for the repair and maintenance of all EPMI/PETRONAS offshore platform equipments including Caterpillar gen sets,WARMAN/FLYGT/REDA/GRUNDFOS horizontal/ vertical/electro pumps,hydraulic power packs, IR air compressors,pumps, diesel driven equipment and drilling equipments.The daily operation of the material warehouse.

1989 - 90, Workshop Manager. – Intergrated Forest Industries, - Solomon Islands.(Forestry)
Supervision of the setup of a planned maintenance schedule for all the company's Komatsu ( Cummins ) machinery, Nissan trucks,equipment and light vehicles.The identification and procurement of equipment spares.The daily operation of the parts warehouse (value US$ 2.5M) A planned on-the-job training for Solomon Islanders.

1988 - 88, Compressor Technician. – UMW Industrial Power, - Malaysia.(Equipment Dealership)
Carry out routine and preventive maintenance on all BroomWade air compressors packages and air dryers onshore / offshore EPMI/PETRONAS.

1987 - 88, Auto Mechanic. – Mentakab Veneer & Plywood, - Malaysia.(Wood)
Carry out repair, upkeep and maintenance work on Toyota forklifts,Volvo logloaders and BroomWade air compressors.

1984 - 86, Artisan. – Solomon Islands Plantations Limited, - Solomon Islands.(Agriculture)
Supervision of the repair, upkeep and maintenance of all palm oil mill process plant, machinery and equipment. Trained 25 Solomon Islanders on the repair, upkeep and maintenance work.

1976 – 84, Gen Set Senior Mechanic. – Tractors Malaysia Bhd, - Malaysia.(Equipment Dealership)
Supervision of mechanics and apprentices on the trouble-shooting of mechanical and electrical faults on all Caterpillar 3300,3400,3500 Series Gen Sets.

1974 – 76, Mechanic Trainee. – Tractors Malaysia Bhd, - Malaysia
Assist mechanics on maintenance and trouble shooting problems on all Caterpillar equipments.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 2282)

Go to Search Parameters...

Brief Description

Post Graduate with over six years of experience as Geologist with various organizations

Logistics, Technology, Transport and Management Professional

CSWIP 3.1, ASNT level II in RT, UT, MT and PT, ISO 9000:2000 Lead Auditor

Construction Manager, Side Manager, Supervisor, Hydraulics Engenieer

Brilliancy in learning and application of complex Technology, Problem solving Technique, And above average IQ level.. Electrical and Electronics Engineer with Abu Dhabi Ministry approved Primavera 3.1 Certificate.

My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI

Supervising, Inspection, Installation, Maintenance, Computer application and coating specialist

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Worked for Mckenzie Forest Products for 25 years 12 years as a Supervisor

4.5 years in petro-chem document control: both engineering and construction (Pre-T/A, T/A & Post T/A) phases, being responsible for the governing of drawings, drawing lists, invoices, contracts, engineering standards, construction packages, distributions all management levels

Geologist with expierence with core logging, database management, quality control, and management.

QA/QC Mech.Engineer near about four years exp. in the field of Pipe Mfg.Company,Pipeline & Piping during project execution, construction, commissioning of m/cs, pipeline and piping & system implement, execution and maintaining related to all quality control and assurance dept.

Worked in oil and gas industries for over 6 years as Planning Engineer and Project Engineer. Advance in using Primavera Project Planner Ver. 3.1. Language skills including English, Chinese, Malay and Chinese dialects. Worked in China for the last 3 years. B. Eng. from Melbourne University.

Lead Naval Architect with 5 years FPSO conversion and new building experience

Medic/Doctor/HSE

Supervise the execution of new 115/69/13.8kV projects (substations) from conception to completion.Design and development of all aspects of electrical system/facilities, substations and distribution

Demonstrated planner with diverse experience and knowledge in Airport project, Gas and Oil Projects and general MEP projects. Strong Engineering and Management background combined with certification in project management courses. Adept at learning new concepts quickly, works well under pressure

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Experienced HR / Recruitment Professional

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

I am a Survey Engineer, experienced in multi disciplinary projects, with a good track record of world class projects. I am highly interested in any position with international or overseas exposures and possibility to maximize skills in Surveying, Management, acquire new ones and progress.

Special Skills: Years of experience in cost-cutting, budgeting, planning and projecting, great communication skills, the ability to work well in and under pressure, team player.Other: Excel, Microsoft word, OSHA

SKILL :-Good understanding of project management, implementation, closure, and quality assurance concepts.Good understanding of data handling and archiving processes. Possess strong administrative & communication skills --Bachelor of Arts--Bachelor of Education--Computer Operator cum Programming Ast

Good communication skills, Able to work with no supervision. Self Motivated,team leader. Extensive organising,work prioritisation and related Skills. Proficient using Maximo and Federal Supply System. Knowledgable with Excel,Microsoft Access,Windows Xp

Silica Sand Mine/Plant Manager

PGDMS from London.A+ honours in hardware engineering. C, C++. Working knowledge of microcontroller programming and hardware languages.

33 Year old Dutch national with 10 years of HDD project management in Asia, Europe and FSU, now living in China.

Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.

My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations and maintenance supervisor or as an inspector. I have over 25 years of progressive experience in the natural gas transmission and distribution pipeline industry.

Civil engineer, project management, site management, cost estimation, Russian, English, Turkmen speaker, CIS experience, Siberia, Russia, Turkmenistan, Kazakhistan

I studied Geological Engineering, Mineral Resources Engineering and Computer operations. Excellent Oral and Written Communication Skills

Experienced NCCER-CSST Safety Technician,Paramedic OSHA 10,30,500, Army Corps of Engineers, Near- Miss Hazard Recognition and Root Cause Investigation Reporting, AHA/CPR Instructor,

IT professional with over 20 years of experience. He holds certifications from a international security standard - CISSP and is awaiting confirmation of his CBCP, MBCI and CCM (Business Continuity)

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Experience in Industrial Marketing (Mining Products), International Trade, Product Management and Project management; Goal driven indivisual, Believes in creating value for the employer

A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

Construction Safety Manager

Official Tendering Works regarding tender requirements, Preparing documents, Co-ordination with GSECL,Supervise the Sites of 66/132/220/400 KV Substation & Transmission Lines, O & M Works

27 years of mechanical and process engineering

Electrical / mechanical service tech

I'm hardworking,trustworthy, quiet but can communicate well, can handle stressfull situations and most of all a very good team player.

Pipeline / HDD Engineer with 7 years global experience

A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player

Camp, facilities, catering Management

knowledge of subcontracting, making the subcontracts in english and russian, verbal and written translation, document control.

6 Years experience in PVT oil and condensate sampling, analysis, simulation, calculation, interpretation, flow assurance and EOR studies, Extensive field and laboratory experience; operations and supervisory.

I have over eight years experience within the recruitment market both in Australia and within South East Asia. I have acquired a wealth of experience servicing some of Australia’s largest mining, energy and construction organisations and have developed extensive skills in recruitment and HR.

With 20yrs of my experience, I have developed a sound background in infrastructure civil project and management, methods and procedures, which includes Commercial & Residential buildings, Roads, bridges, Tunneling, Dams, Environmental Remediation and Extensive Construction Quality Assurance/Quality

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out