Resume - I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector ...

Misco Jobs

Resume #63683

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION_____________________________________________________________________________

Date of Birth ƒç January 15, 1974
Nationality ƒç Indian
Resident Status ƒç Employment Pass (Q1) Holder in Singapore

QUALIFICATIONS______________________________________________________________________________________

Academic ƒç University Degree
„Ñ Bachelor of Science (B.Sc.) with Chemistry, University of Burdwan - India

Technical

Coating & Painting ƒç NACE INTERNATIONAL, USA.
„Ñ CIP Level 3 (Peer Reviewed) - NACE Certified Coatings Inspector,
NACE International, Houston, Texas, U.S.

Passive Fire Protection ƒç „Ñ CHARTEK QA/QC Inspector and Applicator Training conducted and
Certified by International Paint.

EXPERTISED FIELDS_IN QC INSPECTION FOR OIL & GAS PROJECTS____________________________________

Protective Coatings & Painting ƒç Surface Preparation (Blast Cleaning, Water Jetting, Power Tool Cleaning, Hand Tool
Cleaning) & Protective Coatings of Various types.

Passive Fire Protection ƒç „Ñ QC Inspection for Cementatious Fireproofing Materials as well as CHARTEK,
Thermo-lag, Firetex, Pit-chart Fireproofing Systems.

Thermal Spray Aluminium ƒç For Oil & Gas Projects as per relevant ASTM / ISO Standards

Galvanizing ƒç For Oil & Gas Projects as per relevant ASTM / ISO Standards

Chemical Cleaning & Passivationƒç For Oil & Gas Projects as per relevant ASTM / ISO Standards

Insulation ƒç Heat Conservation Type & Cold for Oil & Gas Projects.

Quality ƒç „Ñ Documentation, Quality Management System & ISO 9000

Health, Safety & Environment

EMPLOYMENT HISTORY_______________________________________________________________________________

May 2005 to present ƒç SMOE Pte Ltd, A SembCorp Utilities Company, Singapore, SEA.
„« QA/QC Senior Inspector - Lead Corrosion Protection

December 2004 to May 2005 ƒç Hyundai Engineering Construction Co., Ltd., in Tripoli, Libya.
„« QA/QC Engineer - Corrosion Protection

October 2003 to November 2005 ƒç Consortium of Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France
„« QA/QC Engineer - Lead Corrosion Protection

December 1997 to October 2003 ƒç Punj Lloyd Limited, New Delhi, India & Abu Dhabi, U. A. E.
„« QA/QC Engineer - Coating & Insulation

January 1992 to December 1997 ƒç M/s. B. B. Engineering, Durgapur, West Bengal, India
„« Senior Executive - Workshop

WORK EXPERIENCE SUMMARY_______________________________________________________________________

INTERNATIONAL EXPOSURES:

On-going International Projects with my present organisation in Singapore:

„« Bohai FPSO Project, China. Owner / Client - Conoco Phillips.
Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of
Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of
Equipments, electrical & instrumentation works.

Successfully Completed International Projects with my present organisation in Singapore:

„« Third Transmission Pipeline Project, Bongkot, Thailand. Owner - PTT. Client / Consultant - Bechtel International. Consortium - SMOE Pte., Ltd., - Singapore & Saipem s.a. - France. Works: Construction of Living Quarters & Process Modules for Offshore Platform System - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

„« Erha FPSO Project - Nigeria Deep Sea Water Project. Owner - Exxon Mobil (ESSO Exploration & Production Nigeria Ltd.). Prime Contractor - Saipem s.a., Paris, France. Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

Previous International Projects with my previous organizations:

„« Western Libya Gas Project, Onshore Mediterranean Sea, Tripoli, Libya. Owner - AgipGas BV Eni. Consortium - Snamprogetti SpA, Italy & Hyundai Engineering Construction Co., Ltd., Seoul, South Korea. Works: Construction of Onshore Gas Process Terminal - consists of Construction, Hydro test and Commissioning of Process Piping, Storage Tanks, LNG Tanks along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

„« Shell LNG Receiving Port & Terminal Project, Hazira, Surat, India. Owner - Shell International. Consortium - Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France. Works: Construction of LNG receiving Port & Terminal including Cryogenic Tanks & Piping, Structural Steel, Civil, Instrumentation & Electrical Works, Equipments erection & Installation.

„« MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Panipat Refinery. Prime Contractor - Daelim Industrial Company Ltd., Seoul, Korea. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, and Equipments.

WORK EXPERIENCE SUMMARY________________________________________________________________________

INTERNATIONAL EXPOSURES:

Previous International Projects with my previous organizations:

„« FUJAIRAH WATER & POWER PROJECT (Pipelines), Abu Dhabi (UAE). Client - UAE Offsets Group. Prime Contractor - Technip, GmbH, Germany. Consultant - Fichtner. TPIA - Bureau Varitas, Abu Dhabi Chapter. Works: Construction of 9 nos. Water Storage Tanks.

„« SULPHUR RECOVERY UNIT (SRU) & VIS BREAKER UNIT (VBU). Client - Chennai Petrochemical Corporation Limited (CPCL), India. Consultant - EIL. Prime Contractor - Petrofac International, USA. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks Including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

„« SULPHUR RECOVERY UNIT (SRU), OFF SITES & UTILITIES PROJECT. Client - IOCL Guwahati Refinery, India. Consultant - EIL. Prime Contractor -Siritec Nigi sPa, Itally. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

„« DABHOL LNG POWER PROJECT. Client - ENRON. Consultant - Bechtel. Prime Contacctor - Lintech / Skanska International. Works: Construction of 03 nos. 160,000 Cu.m. capacity LNG Cryogenic Storage Tanks and Regassification Unit, part of 2184 MW capacity distinguished power project.

„« MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Mathura Refinery. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, Civil Works, Instrumentation and Equipments erection.

„« LPG CRYOGENIC PAKAGE. Client - Reliance Petroleum Ltd., Jamnagar Refinery. Consultant - Noevel LGA / DNV. Works: Construction of 01 no. LPG Cryogenic Storage Tank and related piping works.

„« Marine Tank Farm Project. Client - Reliance Petroleum Ltd. Jamnagar Refinery. Consultant - Bax Counsel. Project management - Bechtel India Limited, S.A. Works: 23 nos. of Crude Oil Storage Tanks and related piping works.

WORK EXPERIENCE SUMMARY

- 13 years of total experience in protective coatings
- New construction onshore & offshore, Oil & Gas, Refineries, Steel & Power Plants projects
- Maintenance contracts onshore and offshore locations
- Shutdown contracts onshore and offshore locations
- Special skills in
- Coating, Painting & Linings
- Passive Fire Protection
- Thermal Sprayed Aluminium

Project Management

- Title, function, responsibilities and authorities
- Key contacts for co-ordination
- Scope of work, project contractual requirements such as milestones and completion schedule
- Design engineering, fabrication and construction sequence
- Review specification (including all amendments and pertinent appendices), applicable codes and standards
- Conflicting requirements, project field change requests, technical deviations and engineering change notices
- Pre-job conference records or minutes of meetings
- Attend ad-hoc clarification meetings with client
- Review tender documents for paint supply subcontract
- Attend tender clarification meetings with paint vendors
- Review paint vendor priced & un-priced (technical) documents
- Perform audit at paint vendor facility to assess capabilities
- Submit assessment report & recommendations on potential paint vendors
- Attend technical & commercial negotiation meetings with paint vendors
- Attend paint vendor finalization meeting
- Review paint vendor documents
- Project history or track record
- Project specific site technical representatives resume
- Key personnel - title, function, responsibilities and authorities
- Daily report or log
- Specific field tests & reports
- Laboratory test reports
- Review tender documents for blasting & painting subcontract
- Attend tender clarification meetings with subcontractors
- Review subcontractor priced & un-priced (technical) documents
- Perform audit at subcontractor facility to assess execution capabilities
- Submit assessment report & recommendations on potential subcontractor
- Attend technical & commercial negotiation meetings with subcontractor
- Attend subcontractor finalization meeting
- Review subcontractor documents
- Project history or track record
- Project organization chart
- Resume of key personnel
- Key personnel - title, function, responsibilities and authorities
- Manpower histogram
- List of plant, machinery, equipment, tools, inspection instruments & site office facility
- Procedures
- Inspection test plan
- Daily progress report
- Daily inspection report
- Review company procedures and inspection test plan
- Ensure effective utilization of subcontractor resources
- Monitor subcontractor performance
- Monitor project schedule planned VS actual
- Identify areas in critical path, cause and effect
- Establish, implement & monitor recovery plan
- Attend quality surveillance with client
- Conduct co-ordination meeting
- Conduct weekly meeting with subcontractor
- Review & verify subcontractor monthly valuation
- Advise contracts department on variation orders & claim
- Constant co-ordination with project management team
- Cause and effect of corrosion
- Protection, maintenance and prevention of corrosion
- Design and material selection
- Anti-corrosion protective coatings
- Surface preparation methods
- Mechanical surface preparation during pre-fabrication and onsite portable centrifugal blasting
- Open air blast cleaning
- Vacuum blast cleaning
- Hydroblast cleaning
- Wet blast cleaning
- Hand and power tool cleaning
- General uses of coatings / linings / wrappings
- Painting
- Galvanizing
- Thermal Sprayed Aluminium
- Passive Fire Protection
- High performance internal linings
- Tape wrapping
- Cement linings
- Self leveling compounds
- Anti-skid deck coatings
- Type of coatings commonly used and the major components of coatings
- General physical and chemical properties of the generic types of coatings and application process of coatings / linings
- Calibration of inspection and test instruments
- Using coatings inspection and test instruments
- Defects affecting performance of the applied coatings
- Causes for most common coating defects
- Inspection of defects on coated surface
- Acceptable and unacceptable defects
- Identification of defects and implementation of repair procedure
- Premature failure analysis of coatings
- Protective coating inspection standards for field and shop applications
- Internal spin blasting and spray painting methods
- Plural spray method
- Hot spray method
- Documentation

Enforcement and verification of work performed in accordance with specification, manufacturer recommendations and applicator coating procedure.

- Witness applicator qualification or trade test and paint system qualification
- Measure ambient conditions, surface temperature and air quality requirements
- Inspect location and suitability of access for areas of work
- Inspect type of blasting equipment and tools to be used
- Inspect type and size of blasting media
- Inspect metal surface imperfections / defects
- Test indication of oil or water in compressed air
- Test conductimetric analysis of water-soluble ionic contamination of blasting media
- Inspect pre-cleaning or solvent cleaning of surface
- Measure compressed air pressure
- Inspect degree of cleanliness required
- Measure surface profile of blast cleaned surface
- Assess surface cleanliness of blast cleaned surface
- Assess surface cleanliness soluble salt contamination on blast cleaned surface
- Inspect coating material storage conditions
- Inspect type of coating material to be used
- Monitor thinning, mixing, induction time and pot life
- Inspect type of coating application equipment and tools
- Monitor application method, type and pattern
- Measure wet film thickness by notch gages
- Non-destructive measurement of dry film thickness of non-magnetic coatings applied to ferrous surface
- Non-destructive measurement of dry film thickness of non-conductive coatings applied to non-ferrous surface
- Destructive measurement of dry film thickness of coatings
- Monitor re-coating and final curing schedules
- Test MEK resistance of Inorganic Zinc Rich Primers by solvent rub
- Test film hardness
- Measure the adhesion of coatings applied
- Test pull-off strength of coatings applied
- Test discontinuity (holidays or pinholes) of nonconductive coatings and linings

Health, Safety & Environment

- Understand local and international legal and HSE regulations
- Project specific HSE requirements
- Witness tool box briefing, safety surveillance & safety audit

Administration

- Delegation and distribution of responsibilities
- Employee recruitment
- Employee training needs & wellness programs
- Employee appraisal
- Constant interaction, counseling & team building session

OBJECTIVE

Obtain a position that will allow the utilization of my skills and knowledge tempered by over thirteen years of professional experience in Protective Coatings and Corrosion Prevention and ultimately, to become a long term, highly valued employee of a successful organization.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 2550)

Go to Search Parameters...

Brief Description

Experienced Safety Professional works for more than 12 years in the field of Oil and Gas, Power and Desalination Plant, Refining and Petrochemical Plant, Module Fabrication, Turn-Around, and Upgrading. Mostly in Middle East Region includes Off Shore EPC Project in Iraq. Capable to maintain the site

Innovative Professional with 26 years of progressive experience in engineering design, maintenance planning and management, including 16 years in the Oil/Gas industry.

Scheduler / Planner / Planning Engineer - 13.5 years overseas experience in Refinery, Petrochemical, Keen in Planning, Scheduling and monitoring of all EPC and Maintenance activities, well versed in Primavera (P3 & P6), MS-Project, CMMS Database.

Materials man and materials coordinator since 1975 oil & gas industeries drilling Rigs computerised inventory control warehouse audit, expediting, customs procedure, document translation, stock level controls

A multi-disciplined, goal orientated and experienced Commissioning Manager and Engineer with excellent communication, organisational and personnel management skills on advanced technology, high value, schedule critical and high profile projects.

CAREER OBJECTIVE I desire to build on my experience and training in project management, market research and business development in a progressive career opportunity with a company in the energy industry.

Top- notch problem solver, experienced in marine repairs, marine/port engineering, maritime regulatory body affairs, seeking a managerial position conducting same. Training and background has honed my abilities and proficiency at supervising repairs, new construction/conversions.

Certified Project Management Professional (PMP), MBA with engineering degree, and over 15 years of hands-on diversified project management experiences. Large scale international oil and gas projects worked on include capital projects of up to $4 billion in offshore, upstream, and downstream.

I had worked as an operations/a terminal manager for 8 years respectively for Shell China Limited and Caltex China Limited. I think my working experience and performance may prove myself to be a veteran operations/terminal manager.

13+ years of oil and gas, telecom and pipeline experience as professional landman and broker. 1994 graduate of Regent Univ. School of Law.

Self motivated and experienced sales & marketing manager that always gets results

Over 15 years of successful consultative sales experience in both the software application, enterprise level solution and service markets. Sales, sales management and business development positions held with a wide range of technology related and innovative solution based organizations.

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

Procurement of All Electrical & Instrumentation Items

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Offshore Survey Client Rep / Project Surveyor / Party Chief

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

I am primarily seeking opportunities within the Oil and Gas Industry in the following areas: Training and Competency Assurance, Project Management, and Business Development

QA/QC Manager, QA/Manager, QMS 2000 Lead Auditor, Inspection of Oil/Gas Up-Stream, Down-Stream, Piping, Pipeline, GRP, Welding, Internal Inspection of Plant Equipments, manage Subcontractors, Bidding Evaluation, Preparation of QMS, PQP, ITP, Method Statements, Procedures

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

* Experience in reservoir management, reservoir evaluation, development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance, reservoir engineering, reservoir simulation models and interpretation, reservoir characterization,

I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector having over 13 years of experiences in QA/QC Inspection of Corrosion Prevention Activities & Insulation Inspection for Oil & Gas Projects.

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I speak Russian.

I am a Chemical Engineer by qualification. In my professional career spanning over nineteen years, I have worked in the Marketing function of leading players in the petrochemical industry in India, with regional responsibilities spanning across Asia, Western Europe and Africa.

12 years experience. Rig manager for 2 years and Driller for 8 yrs alsoworked as floor hand but worked my way up to rig manager.

Project Engineering, Project Management, Mechanical Engineering, Piping Engineering

Procurement Professional with over 15 Years Oil and Gas Industry Experience whose Strengths and Skills Saved Millions of Dollars.

+15 yrs exp,Concept,FEED,Detail Engineering,Oil/Gas,onshore,offshore,power plants,Rotating Equipment,Pumps,Compressors,Turbines,Engines,Pressure Vessels,Tanks,Heat Exchangers,Chemical Injection,Instrument Air,Fire Protection,Cranes,Equipment Selection,Specification,Data Sheets,TBE,Vendor Data Review

A materials management and control professional with extensive experience in all phases of material control in oil, gas and petro-chemical industry. Having broad knowledge in Materials Management Systems and can develop/design a Material Control Database System using Microsoft Access Programming. Re

Sixteen (16)years of professional experience within Owner and Consulting companies in projects controls and business management for multidisciplinary engineering, procurement and construction projects for the industries, mainly in oil (upstream & downstream) and mining.

Project Controls Analyst/ Scheduler with EVMS experience

Very good exposure to conceptualisation, business developement, sales, erection, installation, commissioning and O&M of Lean burn Gasengines/ Diesel engines

A professional (M.Sc.degree) well qualified Instrumentation / Process Control Engineer, with 24 years in-depth design, management, consulting, maintenance, and teaching experience; PEO and APEGGA license.

Engineering Degree, Industrial equipment sales to EPC contractors, Power, Oil/ Gas, Utilities, Tenders and RFQ , techno-commercial negotiation, Team Management, Strategic alliances

Contracts and procurement, contract administration, expediting, negotiation,

I wish to be a member of a dynamic company that has long-term goals and continuing challenges in meeting those goals. Would like to be a part of a company that has a true philosophy of co-operative effort where difficult goals and challenges are accomplished by team effort.

Supply Chain, Procurement, Buyer,Logistics,Sales, Administration, Purchase,buyer

I am highly organized and a very proactive person, i pay attention to details, i am caring, visionary and inspiring to learn from. I enjoy working in a team.

EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987

Sales and marketing experience in consimer and industrial products 11 years experiences and 6months SAP-SD functional module experince as fresh.

Seventeen years diversified experience with 7years in Sales and marketing of Drill pipe float valves, Mud gate valves and Fluid End pump parts. Technical exposure and hands-on experience in well testing, Downhole testing and Production facilities.

More then 25 years in maintenance

EXPERICNE SALES AND PURCHASING

B.tech Chemical Engg and MBA in oil and gas

two yr exp in site acquisition feild

More than 15 years experience as a Commercial Manager, Contract Administrator and Quantity Surveyor working with Main Contractors and Consultants in the U.K, Middle East, Caribbean and South East Asia on a variety of Building, Oil & Gas, Civil, Power and major infrastructure projects.

Strong analytical skills and knowledge of business practices, Ability to collect and document business requirements, Report Tools (Business Object, Report Developer etc), Relational Database Design and Development including Advance Stored Procedure, Function, Triger, cursor Procesing etc, Data Model

10 years experience in, Gulf of Suez Petroleum Company the joint venture partner with BP in Egypt.

Facilities Project Engineer - Oil/Gas

Chemical Engineer, with extensive experience/training in environmental, health, safety and quality management systems. International experience. Fluent in Spanish, English and Portuguese. Management skills.

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out